target/linux/brcm63xx/dts/hg556a-c.dts

   1 /dts-v1/;
   2
   3 #include "bcm6358.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Huawei EchoLife HG556a (version C)";
   9         compatible = "huawei,hg556a-c", "brcm,bcm6358";
  10
  11         chosen {
  12                 bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13         };
  14
  15         gpio-keys-polled {
  16                 compatible = "gpio-keys-polled";
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19                 poll-interval = <20>;
  20                 debounce-interval = <60>;
  21
  22                 help {
  23                         label = "help";
  24                         gpios = <&gpio0 8 1>;
  25                         linux,code = <KEY_HELP>;
  26                 };
  27                 wlan {
  28                         label = "wlan";
  29                         gpios = <&gpio0 9 1>;
  30                         linux,code = <KEY_WLAN>;
  31                 };
  32                 restart {
  33                         label = "restart";
  34                         gpios = <&gpio0 10 1>;
  35                         linux,code = <KEY_RESTART>;
  36                 };
  37                 reset {
  38                         label = "reset";
  39                         gpios = <&gpio0 11 1>;
  40                         linux,code = <KEY_CONFIG>;
  41                 };
  42         };
  43
  44         gpio-leds {
  45                 compatible = "gpio-leds";
  46
  47                 lan1_green {
  48                         label = "HW556:green:lan1";
  49                         gpios = <&gpio0 0 1>;
  50                 };
  51                 lan2_green {
  52                         label = "HW556:green:lan2";
  53                         gpios = <&gpio0 1 1>;
  54                 };
  55                 dsl_red {
  56                         label = "HW556:red:dsl";
  57                         gpios = <&gpio0 2 1>;
  58                 };
  59                 power_red {
  60                         label = "HW556:red:power";
  61                         gpios = <&gpio0 3 1>;
  62                         default-state = "on";
  63                 };
  64                 message_red {
  65                         label = "HW556:red:message";
  66                         gpios = <&gpio0 12 1>;
  67                 };
  68                 lan1_red {
  69                         label = "HW556:red:lan1";
  70                         gpios = <&gpio0 13 1>;
  71                 };
  72                 hspa_red {
  73                         label = "HW556:red:hspa";
  74                         gpios = <&gpio0 15 1>;
  75                 };
  76                 lan2_red {
  77                         label = "HW556:red:lan2";
  78                         gpios = <&gpio0 22 1>;
  79                 };
  80                 lan3_green {
  81                         label = "HW556:green:lan3";
  82                         gpios = <&gpio0 23 1>;
  83                 };
  84                 lan3_red {
  85                         label = "HW556:red:lan3";
  86                         gpios = <&gpio0 26 1>;
  87                 };
  88                 lan4_green {
  89                         label = "HW556:green:lan4";
  90                         gpios = <&gpio0 27 1>;
  91                 };
  92                 lan4_red {
  93                         label = "HW556:red:lan4";
  94                         gpios = <&gpio0 28 1>;
  95                 };
  96         };
  97 };
  98
  99 &pflash {
 100         status = "ok";
 101
 102         linux,part-probe = "bcm63xxpart";
 103
 104         cfe@0 {
 105                 label = "CFE";
 106                 reg = <0x000000 0x020000>;
 107                 read-only;
 108         };
 109
 110         linux@20000 {
 111                 label = "linux";
 112                 reg = <0x020000 0xec0000>;
 113         };
 114
 115         cal_data@ee0000 {
 116                 label = "cal_data";
 117                 reg = <0xee0000 0x100000>;
 118                 read-only;
 119         };
 120
 121         nvram@fe0000 {
 122                 label = "nvram";
 123                 reg = <0xfe0000 0x020000>;
 124         };
 125 };