target/linux/brcm63xx/dts/a226m.dts

   1 /dts-v1/;
   2
   3 #include "bcm6358.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Pirelli A226M";
   9         compatible = "pirelli,a226m", "brcm,bcm6358";
  10
  11         gpio-keys-polled {
  12                 compatible = "gpio-keys-polled";
  13                 #address-cells = <1>;
  14                 #size-cells = <0>;
  15                 poll-interval = <20>;
  16                 debounce-interval = <60>;
  17
  18                 wps {
  19                         label = "wps";
  20                         gpios = <&gpio1 2 1>;
  21                         linux,code = <KEY_WPS_BUTTON>;
  22                 };
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&gpio1 5 1>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28         };
  29
  30         gpio-leds {
  31                 compatible = "gpio-leds";
  32
  33                 voip_red {
  34                         label = "DWV-S0:red:VoIP";
  35                         gpios = <&gpio0 0 1>;
  36                 };
  37                 eth_red {
  38                         label = "DWV-S0:red:ethernet";
  39                         gpios = <&gpio0 1 1>;
  40                 };
  41                 dsl_green {
  42                         label = "DWV-S0:green:ADSL";
  43                         gpios = <&gpio0 2 1>;
  44                 };
  45                 usb_green {
  46                         label = "DWV-S0:green:USB";
  47                         gpios = <&gpio0 3 1>;
  48                 };
  49                 power_green {
  50                         label = "DWV-S0:green:power";
  51                         gpios = <&gpio0 4 1>;
  52                         default-state = "on";
  53                 };
  54                 power_red {
  55                         label = "DWV-S0:red:power";
  56                         gpios = <&gpio0 5 1>;
  57                 };
  58                 inet_red {
  59                         label = "DWV-S0:red:internet";
  60                         gpios = <&gpio0 6 1>;
  61                 };
  62                 inet_green {
  63                         label = "DWV-S0:green:internet";
  64                         gpios = <&gpio0 7 1>;
  65                 };
  66                 eth_green {
  67                         label = "DWV-S0:green:ethernet";
  68                         gpios = <&gpio0 8 1>;
  69                 };
  70                 voip_green {
  71                         label = "DWV-S0:green:VoIP";
  72                         gpios = <&gpio0 9 1>;
  73                 };
  74                 wifi_red {
  75                         label = "DWV-S0:red:wifi";
  76                         gpios = <&gpio0 10 1>;
  77                 };
  78                 usb_red {
  79                         label = "DWV-S0:red:USB";
  80                         gpios = <&gpio0 11 1>;
  81                 };
  82                 dsl_red {
  83                         label = "DWV-S0:red:ADSL";
  84                         gpios = <&gpio0 12 1>;
  85                 };
  86         };
  87 };
  88
  89 &pflash {
  90         status = "ok";
  91
  92         linux,part-probe = "bcm63xxpart";
  93
  94         cfe@0 {
  95                 label = "CFE";
  96                 reg = <0x000000 0x010000>;
  97                 read-only;
  98         };
  99
 100         linux@10000 {
 101                 label = "linux";
 102                 reg = <0x010000 0x7e0000>;
 103         };
 104
 105         nvram@7f0000 {
 106                 label = "nvram";
 107                 reg = <0x7f0000 0x010000>;
 108         };
 109 };