target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts

   1 #include "bcm6328.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "NuCom R5010UN v2";
   7         compatible = "nucom,r5010un-v2", "brcm,bcm6328";
   8
   9         aliases {
  10                 led-boot = &led_power_green;
  11                 led-failsafe = &led_power_green;
  12                 led-running = &led_power_green;
  13                 led-upgrade = &led_power_green;
  14         };
  15
  16         chosen {
  17                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  18                 stdout-path = "serial0:115200n8";
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys-polled";
  23                 #address-cells = <1>;
  24                 #size-cells = <0>;
  25                 poll-interval = <20>;
  26
  27                 reset {
  28                         label = "reset";
  29                         gpios = <&pinctrl 23 1>;
  30                         linux,code = <KEY_RESTART>;
  31                         debounce-interval = <60>;
  32                 };
  33
  34                 wps {
  35                         label = "wps";
  36                         gpios = <&pinctrl 24 1>;
  37                         linux,code = <KEY_WPS_BUTTON>;
  38                         debounce-interval = <60>;
  39                 };
  40         };
  41
  42         leds {
  43                 compatible = "gpio-leds";
  44
  45                 inet_green {
  46                         label = "green:inet";
  47                         gpios = <&pinctrl 1 1>;
  48                 };
  49                 inet_fail_red {
  50                         label = "red:inet-fail";
  51                         gpios = <&pinctrl 2 1>;
  52                 };
  53                 dsl_red {
  54                         label = "green:dsl";
  55                         gpios = <&pinctrl 3 1>;
  56                 };
  57                 led_power_green: power_green {
  58                         label = "green:power";
  59                         gpios = <&pinctrl 4 1>;
  60                         default-state = "on";
  61                 };
  62                 power_fail_red {
  63                         label = "red:power-fail";
  64                         gpios = <&pinctrl 5 1>;
  65                 };
  66                 wps_green {
  67                         label = "green:wps";
  68                         gpios = <&pinctrl 10 1>;
  69                 };
  70                 usb_green {
  71                         label = "green:usb";
  72                         gpios = <&pinctrl 11 1>;
  73                 };
  74         };
  75 };
  76
  77 &hsspi {
  78         status = "okay";
  79
  80         flash@0 {
  81                 compatible = "jedec,spi-nor";
  82                 spi-max-frequency = <16666667>;
  83                 spi-tx-bus-width = <2>;
  84                 spi-rx-bus-width = <2>;
  85                 reg = <0>;
  86
  87                 #address-cells = <1>;
  88                 #size-cells = <1>;
  89
  90                 partitions {
  91                         compatible = "fixed-partitions";
  92                         #address-cells = <1>;
  93                         #size-cells = <1>;
  94
  95                         partition@0 {
  96                                 reg = <0x000000 0x010000>;
  97                                 label = "cfe";
  98                                 read-only;
  99                         };
 100
 101                         partition@10000 {
 102                                 reg = <0x010000 0xfe0000>;
 103                                 label = "linux";
 104                                 compatible = "brcm,bcm963xx-imagetag";
 105                         };
 106
 107                         partition@ff0000 {
 108                                 reg = <0xff0000 0x010000>;
 109                                 label = "nvram";
 110                         };
 111                 };
 112         };
 113 };
 114
 115 &uart0 {
 116         status = "okay";
 117 };