target/linux/bcm27xx/patches-5.4/950-0539-ARM-dts-bcm2711-Add-HDMI-DVP.patch

   1 From 119c9cdf9beab785d10ebf8a804ce20b3b0fd779 Mon Sep 17 00:00:00 2001
   2 From: Maxime Ripard <maxime@cerno.tech>
   3 Date: Tue, 28 Jan 2020 09:37:06 +0100
   4 Subject: [PATCH] ARM: dts: bcm2711: Add HDMI DVP
   5
   6 Now that we have a driver for the DVP, let's add its DT node.
   7
   8 Signed-off-by: Maxime Ripard <maxime@cerno.tech>
   9 ---
  10  arch/arm/boot/dts/bcm2711.dtsi | 15 +++++++++++++++
  11  1 file changed, 15 insertions(+)
  12
  13 --- a/arch/arm/boot/dts/bcm2711.dtsi
  14 +++ b/arch/arm/boot/dts/bcm2711.dtsi
  15 @@ -31,6 +31,13 @@
  16                 };
  17         };
  18
  19 +       clk_108MHz: clk-108M {
  20 +               #clock-cells = <0>;
  21 +               compatible = "fixed-clock";
  22 +               clock-frequency = <108000000>;
  23 +               clock-output-names = "108MHz-clock";
  24 +       };
  25 +
  26         firmware_clocks: firmware-clocks {
  27                 compatible = "raspberrypi,firmware-clocks";
  28                 raspberrypi,firmware = <&firmware>;
  29 @@ -268,6 +275,14 @@
  30                 hvs@7e400000 {
  31                         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
  32                 };
  33 +
  34 +               dvp: clock@7ef00000 {
  35 +                       compatible = "brcm,brcm2711-dvp";
  36 +                       reg = <0x7ef00000 0x10>;
  37 +                       clocks = <&clk_108MHz>;
  38 +                       #clock-cells = <1>;
  39 +                       #reset-cells = <1>;
  40 +               };
  41         };
  42
  43         arm-pmu {