ar71xx: add AVM FRITZ!WLAN Repeater 300E support
[openwrt/openwrt.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-fritz300e.c
1 /*
2 * AVM FRITZ!WLAN Repeater 300E board support
3 *
4 * Copyright (C) 2017 Mathias Kresin <dev@kresin.me>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
9 */
10
11 #include <linux/gpio.h>
12 #include <linux/mtd/mtd.h>
13 #include <linux/mtd/partitions.h>
14
15 #include "dev-ap9x-pci.h"
16 #include "dev-eth.h"
17 #include "dev-gpio-buttons.h"
18 #include "dev-leds-gpio.h"
19 #include "dev-m25p80.h"
20 #include "machtypes.h"
21
22 #define FRITZ300E_KEYS_POLL_INTERVAL 20 /* msecs */
23 #define FRITZ300E_KEYS_DEBOUNCE_INTERVAL (3 * FRITZ300E_KEYS_POLL_INTERVAL)
24
25 static struct mtd_partition fritz300e_flash_partitions[] = {
26 {
27 .name = "urloader",
28 .offset = 0,
29 .size = 0x0020000,
30 .mask_flags = MTD_WRITEABLE,
31 }, {
32 .name = "firmware",
33 .offset = 0x0020000,
34 .size = 0x0ee0000,
35 }, {
36 .name = "tffs (1)",
37 .offset = 0x0f00000,
38 .size = 0x0080000,
39 .mask_flags = MTD_WRITEABLE,
40 }, {
41 .name = "tffs (2)",
42 .offset = 0x0f80000,
43 .size = 0x0080000,
44 .mask_flags = MTD_WRITEABLE,
45 }
46 };
47
48 static struct flash_platform_data fritz300e_flash_data = {
49 .parts = fritz300e_flash_partitions,
50 .nr_parts = ARRAY_SIZE(fritz300e_flash_partitions),
51 };
52
53 static struct gpio_led fritz300e_leds_gpio[] __initdata = {
54 {
55 .name = "fritz300e:green:power",
56 .gpio = 13,
57 .active_low = 1,
58 }, {
59 .name = "fritz300e:green:lan",
60 .gpio = 15,
61 .active_low = 1,
62 }, {
63 .name = "fritz300e:green:wlan",
64 .gpio = 16,
65 .active_low = 1,
66 }
67 };
68
69 static struct gpio_led fritz300e_wmac_leds_gpio[] = {
70 {
71 .name = "fritz300e:green:rssi0",
72 .gpio = 10,
73 .active_low = 1,
74 }, {
75 .name = "fritz300e:green:rssi1",
76 .gpio = 4,
77 .active_low = 1,
78 }, {
79 .name = "fritz300e:green:rssi2",
80 .gpio = 6,
81 .active_low = 1,
82 }, {
83 .name = "fritz300e:green:rssi3",
84 .gpio = 7,
85 .active_low = 1,
86 }, {
87 .name = "fritz300e:green:rssi4",
88 .gpio = 5,
89 .active_low = 1,
90 }
91 };
92
93 static struct gpio_keys_button fritz300e_gpio_keys[] __initdata = {
94 {
95 .desc = "wps",
96 .type = EV_KEY,
97 .code = KEY_WPS_BUTTON,
98 .debounce_interval = FRITZ300E_KEYS_DEBOUNCE_INTERVAL,
99 .gpio = 12,
100 .active_low = 1,
101 },
102 };
103
104 static void __init fritz300e_setup(void)
105 {
106 /* get the Lantiq PEF7071V phy out of reset */
107 gpio_request_one(11, GPIOF_OUT_INIT_HIGH, "phy reset");
108
109 ath79_register_m25p80(&fritz300e_flash_data);
110
111 ath79_register_mdio(0, ~(BIT(0)));
112
113 ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
114 ath79_eth0_data.speed = SPEED_1000;
115 ath79_eth0_data.duplex = DUPLEX_FULL;
116 ath79_eth0_data.phy_mask = BIT(0);
117
118 ath79_register_eth(0);
119
120 ath79_register_leds_gpio(-1, ARRAY_SIZE(fritz300e_leds_gpio),
121 fritz300e_leds_gpio);
122 ath79_register_gpio_keys_polled(-1, FRITZ300E_KEYS_POLL_INTERVAL,
123 ARRAY_SIZE(fritz300e_gpio_keys),
124 fritz300e_gpio_keys);
125
126 ap9x_pci_setup_wmac_leds(0, fritz300e_wmac_leds_gpio,
127 ARRAY_SIZE(fritz300e_wmac_leds_gpio));
128 ap91_pci_init_simple();
129 }
130
131 MIPS_MACHINE(ATH79_MACH_FRITZ300E, "FRITZ300E",
132 "AVM FRITZ!WLAN Repeater 300E", fritz300e_setup);