package/network/services/hostapd/files/netifd.sh

   1 wpa_supplicant_add_rate() {
   2         local var="$1"
   3         local val="$(($2 / 1000))"
   4         local sub="$((($2 / 100) % 10))"
   5         append $var "$val" ","
   6         [ $sub -gt 0 ] && append $var "."
   7 }
   8
   9 hostapd_add_rate() {
  10         local var="$1"
  11         local val="$(($2 / 100))"
  12         append $var "$val" " "
  13 }
  14
  15 hostapd_append_wep_key() {
  16         local var="$1"
  17
  18         wep_keyidx=0
  19         set_default key 1
  20         case "$key" in
  21                 [1234])
  22                         for idx in 1 2 3 4; do
  23                                 local zidx
  24                                 zidx=$(($idx - 1))
  25                                 json_get_var ckey "key${idx}"
  26                                 [ -n "$ckey" ] && \
  27                                         append $var "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N$T"
  28                         done
  29                         wep_keyidx=$((key - 1))
  30                 ;;
  31                 *)
  32                         append $var "wep_key0=$(prepare_key_wep "$key")" "$N$T"
  33                 ;;
  34         esac
  35 }
  36
  37 hostapd_add_log_config() {
  38         config_add_boolean \
  39                 log_80211 \
  40                 log_8021x \
  41                 log_radius \
  42                 log_wpa \
  43                 log_driver \
  44                 log_iapp \
  45                 log_mlme
  46
  47         config_add_int log_level
  48 }
  49
  50 hostapd_common_add_device_config() {
  51         config_add_array basic_rate
  52         config_add_array supported_rates
  53
  54         config_add_string country
  55         config_add_boolean country_ie doth
  56         config_add_string require_mode
  57
  58         hostapd_add_log_config
  59 }
  60
  61 hostapd_prepare_device_config() {
  62         local config="$1"
  63         local driver="$2"
  64
  65         local base="${config%%.conf}"
  66         local base_cfg=
  67
  68         json_get_vars country country_ie beacon_int doth require_mode
  69
  70         hostapd_set_log_options base_cfg
  71
  72         set_default country_ie 1
  73         set_default doth 1
  74
  75         [ -n "$country" ] && {
  76                 append base_cfg "country_code=$country" "$N"
  77
  78                 [ "$country_ie" -gt 0 ] && append base_cfg "ieee80211d=1" "$N"
  79                 [ "$hwmode" = "a" -a "$doth" -gt 0 ] && append base_cfg "ieee80211h=1" "$N"
  80         }
  81         [ -n "$hwmode" ] && append base_cfg "hw_mode=$hwmode" "$N"
  82
  83         local brlist= br
  84         json_get_values basic_rate_list basic_rate
  85         for br in $basic_rate_list; do
  86                 hostapd_add_rate brlist "$br"
  87         done
  88         case "$require_mode" in
  89                 g) brlist="60 120 240" ;;
  90                 n) append base_cfg "require_ht=1" "$N";;
  91                 ac) append base_cfg "require_vht=1" "$N";;
  92         esac
  93
  94         local rlist= r
  95         json_get_values rate_list supported_rates
  96         for r in $rate_list; do
  97                 hostapd_add_rate rlist "$r"
  98         done
  99
 100         [ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 101         [ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
 102         [ -n "$beacon_int" ] && append base_cfg "beacon_int=$beacon_int" "$N"
 103
 104         cat > "$config" <<EOF
 105 driver=$driver
 106 $base_cfg
 107 EOF
 108 }
 109
 110 hostapd_common_add_bss_config() {
 111         config_add_string 'bssid:macaddr' 'ssid:string'
 112         config_add_boolean wds wmm uapsd hidden
 113
 114         config_add_int maxassoc max_inactivity
 115         config_add_boolean disassoc_low_ack isolate short_preamble
 116
 117         config_add_int \
 118                 wep_rekey eap_reauth_period \
 119                 wpa_group_rekey wpa_pair_rekey wpa_master_rekey
 120
 121         config_add_boolean rsn_preauth auth_cache
 122         config_add_int ieee80211w
 123
 124         config_add_string 'auth_server:host' 'server:host'
 125         config_add_string auth_secret
 126         config_add_int 'auth_port:port' 'port:port'
 127
 128         config_add_string acct_server
 129         config_add_string acct_secret
 130         config_add_int acct_port
 131
 132         config_add_string dae_client
 133         config_add_string dae_secret
 134         config_add_int dae_port
 135
 136         config_add_string nasid
 137         config_add_string ownip
 138         config_add_string iapp_interface
 139         config_add_string eap_type ca_cert client_cert identity auth priv_key priv_key_pwd
 140
 141         config_add_int dynamic_vlan vlan_naming
 142         config_add_string vlan_tagged_interface vlan_bridge
 143         config_add_string vlan_file
 144
 145         config_add_string 'key1:wepkey' 'key2:wepkey' 'key3:wepkey' 'key4:wepkey' 'password:wpakey'
 146
 147         config_add_string wpa_psk_file
 148
 149         config_add_boolean wps_pushbutton wps_label ext_registrar wps_pbc_in_m1
 150         config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin
 151
 152         config_add_boolean ieee80211r pmk_r1_push
 153         config_add_int r0_key_lifetime reassociation_deadline
 154         config_add_string mobility_domain r1_key_holder
 155         config_add_array r0kh r1kh
 156
 157         config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
 158
 159         config_add_string macfilter 'macfile:file'
 160         config_add_array 'maclist:list(macaddr)'
 161
 162         config_add_array bssid_blacklist
 163         config_add_array bssid_whitelist
 164
 165         config_add_int mcast_rate
 166         config_add_array basic_rate
 167         config_add_array supported_rates
 168 }
 169
 170 hostapd_set_bss_options() {
 171         local var="$1"
 172         local phy="$2"
 173         local vif="$3"
 174
 175         wireless_vif_parse_encryption
 176
 177         local bss_conf
 178         local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
 179
 180         json_get_vars \
 181                 wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey \
 182                 maxassoc max_inactivity disassoc_low_ack isolate auth_cache \
 183                 wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 \
 184                 wps_device_type wps_device_name wps_manufacturer wps_pin \
 185                 macfilter ssid wmm uapsd hidden short_preamble rsn_preauth \
 186                 iapp_interface
 187
 188         set_default isolate 0
 189         set_default maxassoc 0
 190         set_default max_inactivity 0
 191         set_default short_preamble 1
 192         set_default disassoc_low_ack 1
 193         set_default hidden 0
 194         set_default wmm 1
 195         set_default uapsd 1
 196
 197         append bss_conf "ctrl_interface=/var/run/hostapd"
 198         if [ "$isolate" -gt 0 ]; then
 199                 append bss_conf "ap_isolate=$isolate" "$N"
 200         fi
 201         if [ "$maxassoc" -gt 0 ]; then
 202                 append bss_conf "max_num_sta=$maxassoc" "$N"
 203         fi
 204         if [ "$max_inactivity" -gt 0 ]; then
 205                 append bss_conf "ap_max_inactivity=$max_inactivity" "$N"
 206         fi
 207
 208         append bss_conf "disassoc_low_ack=$disassoc_low_ack" "$N"
 209         append bss_conf "preamble=$short_preamble" "$N"
 210         append bss_conf "wmm_enabled=$wmm" "$N"
 211         append bss_conf "ignore_broadcast_ssid=$hidden" "$N"
 212         append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 213
 214         [ "$wpa" -gt 0 ] && {
 215                 [ -n "$wpa_group_rekey"  ] && append bss_conf "wpa_group_rekey=$wpa_group_rekey" "$N"
 216                 [ -n "$wpa_pair_rekey"   ] && append bss_conf "wpa_ptk_rekey=$wpa_pair_rekey"    "$N"
 217                 [ -n "$wpa_master_rekey" ] && append bss_conf "wpa_gmk_rekey=$wpa_master_rekey"  "$N"
 218         }
 219
 220         case "$auth_type" in
 221                 none)
 222                         wps_possible=1
 223                         # Here we make the assumption that if we're in open mode
 224                         # with WPS enabled, we got to be in unconfigured state.
 225                         wps_not_configured=1
 226                 ;;
 227                 psk)
 228                         json_get_vars key wpa_psk_file
 229                         if [ ${#key} -lt 8 ]; then
 230                                 wireless_setup_vif_failed INVALID_WPA_PSK
 231                                 return 1
 232                         elif [ ${#key} -eq 64 ]; then
 233                                 append bss_conf "wpa_psk=$key" "$N"
 234                         else
 235                                 append bss_conf "wpa_passphrase=$key" "$N"
 236                         fi
 237                         [ -n "$wpa_psk_file" ] && {
 238                                 [ -e "$wpa_psk_file" ] || touch "$wpa_psk_file"
 239                                 append bss_conf "wpa_psk_file=$wpa_psk_file" "$N"
 240                         }
 241                         wps_possible=1
 242                         append wpa_key_mgmt "WPA-PSK"
 243                 ;;
 244                 eap)
 245                         json_get_vars \
 246                                 auth_server auth_secret auth_port \
 247                                 acct_server acct_secret acct_port \
 248                                 dae_client dae_secret dae_port \
 249                                 ownip \
 250                                 eap_reauth_period dynamic_vlan \
 251                                 vlan_naming vlan_tagged_interface \
 252                                 vlan_bridge vlan_file
 253
 254                         # legacy compatibility
 255                         [ -n "$auth_server" ] || json_get_var auth_server server
 256                         [ -n "$auth_port" ] || json_get_var auth_port port
 257                         [ -n "$auth_secret" ] || json_get_var auth_secret key
 258
 259                         set_default auth_port 1812
 260                         set_default acct_port 1813
 261                         set_default dae_port 3799
 262
 263                         set_default vlan_naming 1
 264
 265                         append bss_conf "auth_server_addr=$auth_server" "$N"
 266                         append bss_conf "auth_server_port=$auth_port" "$N"
 267                         append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
 268
 269                         [ -n "$acct_server" ] && {
 270                                 append bss_conf "acct_server_addr=$acct_server" "$N"
 271                                 append bss_conf "acct_server_port=$acct_port" "$N"
 272                                 [ -n "$acct_secret" ] && \
 273                                         append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
 274                         }
 275
 276                         [ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
 277
 278                         [ -n "$dae_client" -a -n "$dae_secret" ] && {
 279                                 append bss_conf "radius_das_port=$dae_port" "$N"
 280                                 append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
 281                         }
 282
 283                         [ -n "$ownip" ] && append bss_conf "own_ip_addr=$ownip" "$N"
 284                         append bss_conf "eapol_key_index_workaround=1" "$N"
 285                         append bss_conf "ieee8021x=1" "$N"
 286                         append wpa_key_mgmt "WPA-EAP"
 287
 288                         [ -n "$dynamic_vlan" ] && {
 289                                 append bss_conf "dynamic_vlan=$dynamic_vlan" "$N"
 290                                 append bss_conf "vlan_naming=$vlan_naming" "$N"
 291                                 [ -n "$vlan_bridge" ] && \
 292                                         append bss_conf "vlan_bridge=$vlan_bridge" "$N"
 293                                 [ -n "$vlan_tagged_interface" ] && \
 294                                         append bss_conf "vlan_tagged_interface=$vlan_tagged_interface" "$N"
 295                                 [ -n "$vlan_file" ] && {
 296                                         [ -e "$vlan_file" ] || touch "$vlan_file"
 297                                         append bss_conf "vlan_file=$vlan_file" "$N"
 298                                 }
 299                         }
 300                 ;;
 301                 wep)
 302                         local wep_keyidx=0
 303                         json_get_vars key
 304                         hostapd_append_wep_key bss_conf
 305                         append bss_conf "wep_default_key=$wep_keyidx" "$N"
 306                         [ -n "$wep_rekey" ] && append bss_conf "wep_rekey_period=$wep_rekey" "$N"
 307                 ;;
 308         esac
 309
 310         local auth_algs=$((($auth_mode_shared << 1) | $auth_mode_open))
 311         append bss_conf "auth_algs=${auth_algs:-1}" "$N"
 312         append bss_conf "wpa=$wpa" "$N"
 313         [ -n "$wpa_pairwise" ] && append bss_conf "wpa_pairwise=$wpa_pairwise" "$N"
 314
 315         set_default wps_pushbutton 0
 316         set_default wps_label 0
 317         set_default wps_pbc_in_m1 0
 318
 319         config_methods=
 320         [ "$wps_pushbutton" -gt 0 ] && append config_methods push_button
 321         [ "$wps_label" -gt 0 ] && append config_methods label
 322
 323         [ -n "$wps_possible" -a -n "$config_methods" ] && {
 324                 set_default ext_registrar 0
 325                 set_default wps_device_type "6-0050F204-1"
 326                 set_default wps_device_name "OpenWrt AP"
 327                 set_default wps_manufacturer "openwrt.org"
 328
 329                 wps_state=2
 330                 [ -n "$wps_configured" ] && wps_state=1
 331
 332                 [ "$ext_registrar" -gt 0 -a -n "$network_bridge" ] && append bss_conf "upnp_iface=$network_bridge" "$N"
 333
 334                 append bss_conf "eap_server=1" "$N"
 335                 [ -n "$wps_pin" ] && append bss_conf "ap_pin=$wps_pin" "$N"
 336                 append bss_conf "wps_state=$wps_state" "$N"
 337                 append bss_conf "ap_setup_locked=0" "$N"
 338                 append bss_conf "device_type=$wps_device_type" "$N"
 339                 append bss_conf "device_name=$wps_device_name" "$N"
 340                 append bss_conf "manufacturer=$wps_manufacturer" "$N"
 341                 append bss_conf "config_methods=$config_methods" "$N"
 342                 [ "$wps_pbc_in_m1" -gt 0 ] && append bss_conf "pbc_in_m1=$wps_pbc_in_m1" "$N"
 343         }
 344
 345         append bss_conf "ssid=$ssid" "$N"
 346         [ -n "$network_bridge" ] && append bss_conf "bridge=$network_bridge" "$N"
 347         [ -n "$iapp_interface" ] && {
 348                 iapp_interface="$(uci_get_state network "$iapp_interface" ifname "$iapp_interface")"
 349                 [ -n "$iapp_interface" ] && append bss_conf "iapp_interface=$iapp_interface" "$N"
 350         }
 351
 352         if [ "$wpa" -ge "1" ]; then
 353                 json_get_vars nasid ieee80211r
 354                 set_default ieee80211r 0
 355                 [ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
 356
 357                 if [ "$ieee80211r" -gt "0" ]; then
 358                         json_get_vars mobility_domain r0_key_lifetime r1_key_holder \
 359                         reassociation_deadline pmk_r1_push
 360                         json_get_values r0kh r0kh
 361                         json_get_values r1kh r1kh
 362
 363                         set_default mobility_domain "4f57"
 364                         set_default r0_key_lifetime 10000
 365                         set_default r1_key_holder "00004f577274"
 366                         set_default reassociation_deadline 1000
 367                         set_default pmk_r1_push 0
 368
 369                         append bss_conf "mobility_domain=$mobility_domain" "$N"
 370                         append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
 371                         append bss_conf "r1_key_holder=$r1_key_holder" "$N"
 372                         append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
 373                         append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
 374
 375                         for kh in $r0kh; do
 376                                 append bss_conf "r0kh=${kh//,/ }" "$N"
 377                         done
 378                         for kh in $r1kh; do
 379                                 append bss_conf "r1kh=${kh//,/ }" "$N"
 380                         done
 381
 382                         [ "$wpa_key_mgmt" != "${wpa_key_mgmt/EAP/}" ] && append wpa_key_mgmt "FT-EAP"
 383                         [ "$wpa_key_mgmt" != "${wpa_key_mgmt/PSK/}" ] && append wpa_key_mgmt "FT-PSK"
 384                 fi
 385
 386                 [ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
 387         fi
 388
 389         if [ "$wpa" -ge "2" ]; then
 390                 if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then
 391                         set_default auth_cache 1
 392                         append bss_conf "rsn_preauth=1" "$N"
 393                         append bss_conf "rsn_preauth_interfaces=$network_bridge" "$N"
 394                 else
 395                         set_default auth_cache 0
 396                 fi
 397
 398                 append bss_conf "okc=$auth_cache" "$N"
 399                 [ "$auth_cache" = 0 ] && append bss_conf "disable_pmksa_caching=1" "$N"
 400
 401                 # RSN -> allow management frame protection
 402                 json_get_var ieee80211w ieee80211w
 403                 case "$ieee80211w" in
 404                         [012])
 405                                 json_get_vars ieee80211w_max_timeout ieee80211w_retry_timeout
 406                                 append bss_conf "ieee80211w=$ieee80211w" "$N"
 407                                 [ "$ieee80211w" -gt "0" ] && {
 408                                         [ -n "$ieee80211w_max_timeout" ] && \
 409                                                 append bss_conf "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
 410                                         [ -n "$ieee80211w_retry_timeout" ] && \
 411                                                 append bss_conf "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N"
 412                                 }
 413                         ;;
 414                 esac
 415         fi
 416
 417         _macfile="/var/run/hostapd-$ifname.maclist"
 418         case "$macfilter" in
 419                 allow)
 420                         append bss_conf "macaddr_acl=1" "$N"
 421                         append bss_conf "accept_mac_file=$_macfile" "$N"
 422                 ;;
 423                 deny)
 424                         append bss_conf "macaddr_acl=0" "$N"
 425                         append bss_conf "deny_mac_file=$_macfile" "$N"
 426                 ;;
 427                 *)
 428                         _macfile=""
 429                 ;;
 430         esac
 431
 432         [ -n "$_macfile" ] && {
 433                 json_get_vars macfile
 434                 json_get_values maclist maclist
 435
 436                 rm -f "$_macfile"
 437                 (
 438                         for mac in $maclist; do
 439                                 echo "$mac"
 440                         done
 441                         [ -n "$macfile" -a -f "$macfile" ] && cat "$macfile"
 442                 ) > "$_macfile"
 443         }
 444
 445         append "$var" "$bss_conf" "$N"
 446         return 0
 447 }
 448
 449 hostapd_set_log_options() {
 450         local var="$1"
 451
 452         local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
 453         json_get_vars log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
 454
 455         set_default log_level 2
 456         set_default log_80211  1
 457         set_default log_8021x  1
 458         set_default log_radius 1
 459         set_default log_wpa    1
 460         set_default log_driver 1
 461         set_default log_iapp   1
 462         set_default log_mlme   1
 463
 464         local log_mask=$(( \
 465                 ($log_80211  << 0) | \
 466                 ($log_8021x  << 1) | \
 467                 ($log_radius << 2) | \
 468                 ($log_wpa    << 3) | \
 469                 ($log_driver << 4) | \
 470                 ($log_iapp   << 5) | \
 471                 ($log_mlme   << 6)   \
 472         ))
 473
 474         append "$var" "logger_syslog=$log_mask" "$N"
 475         append "$var" "logger_syslog_level=$log_level" "$N"
 476         append "$var" "logger_stdout=$log_mask" "$N"
 477         append "$var" "logger_stdout_level=$log_level" "$N"
 478
 479         return 0
 480 }
 481
 482 _wpa_supplicant_common() {
 483         local ifname="$1"
 484
 485         _rpath="/var/run/wpa_supplicant"
 486         _config="${_rpath}-$ifname.conf"
 487 }
 488
 489 wpa_supplicant_teardown_interface() {
 490         _wpa_supplicant_common "$1"
 491         rm -rf "$_rpath/$1" "$_config"
 492 }
 493
 494 wpa_supplicant_prepare_interface() {
 495         local ifname="$1"
 496         _w_driver="$2"
 497
 498         _wpa_supplicant_common "$1"
 499
 500         json_get_vars mode wds
 501
 502         [ -n "$network_bridge" ] && {
 503                 fail=
 504                 case "$mode" in
 505                         adhoc)
 506                                 fail=1
 507                         ;;
 508                         sta)
 509                                 [ "$wds" = 1 ] || fail=1
 510                         ;;
 511                 esac
 512
 513                 [ -n "$fail" ] && {
 514                         wireless_setup_vif_failed BRIDGE_NOT_ALLOWED
 515                         return 1
 516                 }
 517         }
 518
 519         local ap_scan=
 520
 521         _w_mode="$mode"
 522         _w_modestr=
 523
 524         [[ "$mode" = adhoc ]] && {
 525                 ap_scan="ap_scan=2"
 526
 527                 _w_modestr="mode=1"
 528         }
 529
 530         wpa_supplicant_teardown_interface "$ifname"
 531         cat > "$_config" <<EOF
 532 $ap_scan
 533 EOF
 534         return 0
 535 }
 536
 537 wpa_supplicant_add_network() {
 538         local ifname="$1"
 539
 540         _wpa_supplicant_common "$1"
 541         wireless_vif_parse_encryption
 542
 543         json_get_vars \
 544                 ssid bssid key \
 545                 basic_rate mcast_rate \
 546                 ieee80211w ieee80211r
 547
 548         set_default ieee80211r 0
 549
 550         local key_mgmt='NONE'
 551         local enc_str=
 552         local network_data=
 553         local T="       "
 554
 555         local wpa_key_mgmt="WPA-PSK"
 556         local scan_ssid="scan_ssid=1"
 557         local freq
 558
 559         [ "$ieee80211r" -gt 0 ] && wpa_key_mgmt="FT-PSK $wpa_key_mgmt"
 560
 561         [[ "$_w_mode" = "adhoc" ]] && {
 562                 append network_data "mode=1" "$N$T"
 563                 [ -n "$channel" ] && {
 564                         freq="$(get_freq "$phy" "$channel")"
 565                         append network_data "fixed_freq=1" "$N$T"
 566                         append network_data "frequency=$freq" "$N$T"
 567                 }
 568
 569                 scan_ssid="scan_ssid=0"
 570
 571                 [ "$_w_driver" = "nl80211" ] || wpa_key_mgmt="WPA-NONE"
 572         }
 573
 574         [[ "$_w_mode" = "mesh" ]] && {
 575                 append network_data "mode=5" "$N$T"
 576                 [ -n "$channel" ] && {
 577                         freq="$(get_freq "$phy" "$channel")"
 578                         append network_data "frequency=$freq" "$N$T"
 579                 }
 580                 wpa_key_mgmt="SAE"
 581                 scan_ssid=""
 582         }
 583
 584         [[ "$_w_mode" = "adhoc" -o "$_w_mode" = "mesh" ]] && append network_data "$_w_modestr" "$N$T"
 585
 586         case "$auth_type" in
 587                 none) ;;
 588                 wep)
 589                         local wep_keyidx=0
 590                         hostapd_append_wep_key network_data
 591                         append network_data "wep_tx_keyidx=$wep_keyidx" "$N$T"
 592                 ;;
 593                 psk)
 594                         local passphrase
 595
 596                         key_mgmt="$wpa_key_mgmt"
 597                         if [ ${#key} -eq 64 ]; then
 598                                 passphrase="psk=${key}"
 599                         else
 600                                 passphrase="psk=\"${key}\""
 601                         fi
 602                         append network_data "$passphrase" "$N$T"
 603                 ;;
 604                 eap)
 605                         key_mgmt='WPA-EAP'
 606                         [ "$ieee80211r" -gt 0 ] && key_mgmt="FT-EAP $key_mgmt"
 607
 608                         json_get_vars eap_type identity ca_cert
 609                         [ -n "$ca_cert" ] && append network_data "ca_cert=\"$ca_cert\"" "$N$T"
 610                         [ -n "$identity" ] && append network_data "identity=\"$identity\"" "$N$T"
 611                         case "$eap_type" in
 612                                 tls)
 613                                         json_get_vars client_cert priv_key priv_key_pwd
 614                                         append network_data "client_cert=\"$client_cert\"" "$N$T"
 615                                         append network_data "private_key=\"$priv_key\"" "$N$T"
 616                                         append network_data "private_key_passwd=\"$priv_key_pwd\"" "$N$T"
 617                                 ;;
 618                                 peap|ttls)
 619                                         json_get_vars auth password
 620                                         set_default auth MSCHAPV2
 621                                         append network_data "phase2=\"$auth\"" "$N$T"
 622                                         append network_data "password=\"$password\"" "$N$T"
 623                                 ;;
 624                         esac
 625                         append network_data "eap=$(echo $eap_type | tr 'a-z' 'A-Z')" "$N$T"
 626                 ;;
 627         esac
 628
 629         [ "$mode" = mesh ] || {
 630                 case "$wpa" in
 631                         1)
 632                                 append network_data "proto=WPA" "$N$T"
 633                         ;;
 634                         2)
 635                                 append network_data "proto=RSN" "$N$T"
 636                         ;;
 637                 esac
 638
 639                 case "$ieee80211w" in
 640                         [012])
 641                                 [ "$wpa" -ge 2 ] && append network_data "ieee80211w=$ieee80211w" "$N$T"
 642                         ;;
 643                 esac
 644         }
 645         local beacon_int brates mrate
 646         [ -n "$bssid" ] && append network_data "bssid=$bssid" "$N$T"
 647         [ -n "$beacon_int" ] && append network_data "beacon_int=$beacon_int" "$N$T"
 648
 649         local bssid_blacklist bssid_whitelist
 650         json_get_values bssid_blacklist bssid_blacklist
 651         json_get_values bssid_whitelist bssid_whitelist
 652
 653         [ -n "$bssid_blacklist" ] && append network_data "bssid_blacklist=$bssid_blacklist" "$N$T"
 654         [ -n "$bssid_whitelist" ] && append network_data "bssid_whitelist=$bssid_whitelist" "$N$T"
 655
 656         [ -n "$basic_rate" ] && {
 657                 local br rate_list=
 658                 for br in $basic_rate; do
 659                         wpa_supplicant_add_rate rate_list "$br"
 660                 done
 661                 [ -n "$rate_list" ] && append network_data "rates=$rate_list" "$N$T"
 662         }
 663
 664         [ -n "$mcast_rate" ] && {
 665                 local mc_rate=
 666                 wpa_supplicant_add_rate mc_rate "$mcast_rate"
 667                 append network_data "mcast_rate=$mc_rate" "$N$T"
 668         }
 669
 670         local ht_str
 671         [[ "$_w_mode" = adhoc ]] || ibss_htmode=
 672         [ -n "$ibss_htmode" ] && append network_data "htmode=$ibss_htmode" "$N$T"
 673
 674         cat >> "$_config" <<EOF
 675 network={
 676         $scan_ssid
 677         ssid="$ssid"
 678         key_mgmt=$key_mgmt
 679         $network_data
 680 }
 681 EOF
 682         return 0
 683 }
 684
 685 wpa_supplicant_run() {
 686         local ifname="$1"; shift
 687
 688         _wpa_supplicant_common "$ifname"
 689
 690         /usr/sbin/wpa_supplicant -B \
 691                 ${network_bridge:+-b $network_bridge} \
 692                 -P "/var/run/wpa_supplicant-${ifname}.pid" \
 693                 -D ${_w_driver:-wext} \
 694                 -i "$ifname" \
 695                 -c "$_config" \
 696                 -C "$_rpath" \
 697                 "$@"
 698
 699         ret="$?"
 700         wireless_add_process "$(cat "/var/run/wpa_supplicant-${ifname}.pid")" /usr/sbin/wpa_supplicant 1
 701
 702         [ "$ret" != 0 ] && wireless_setup_vif_failed WPA_SUPPLICANT_FAILED
 703
 704         return $ret
 705 }
 706
 707 hostapd_common_cleanup() {
 708         killall hostapd wpa_supplicant meshd-nl80211
 709 }