package/boot/uboot-sunxi/patches/002-add-lamobo-r1.diff

   1 diff -ruN old/arch/arm/dts/Makefile new/arch/arm/dts/Makefile
   2 --- old/arch/arm/dts/Makefile   2015-07-14 19:32:21.000000000 +0200
   3 +++ new/arch/arm/dts/Makefile   2015-07-31 23:23:33.518767858 +0200
   4 @@ -107,6 +107,7 @@
   5         sun7i-a20-cubietruck.dtb \
   6         sun7i-a20-hummingbird.dtb \
   7         sun7i-a20-i12-tvbox.dtb \
   8 +       sun7i-a20-lamobo-r1.dtb \
   9         sun7i-a20-m3.dtb \
  10         sun7i-a20-m5.dtb \
  11         sun7i-a20-mk808c.dtb \
  12 diff -ruN old/arch/arm/dts/sun7i-a20-lamobo-r1.dts new/arch/arm/dts/sun7i-a20-lamobo-r1.dts
  13 --- old/arch/arm/dts/sun7i-a20-lamobo-r1.dts    1970-01-01 01:00:00.000000000 +0100
  14 +++ new/arch/arm/dts/sun7i-a20-lamobo-r1.dts    2015-07-31 23:19:30.811206714 +0200
  15 @@ -0,0 +1,239 @@
  16 +/*
  17 + * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
  18 + *
  19 + * Hans de Goede <hdegoede@redhat.com>
  20 + *
  21 + * This file is dual-licensed: you can use it either under the terms
  22 + * of the GPL or the X11 license, at your option. Note that this dual
  23 + * licensing only applies to this file, and not this project as a
  24 + * whole.
  25 + *
  26 + *  a) This file is free software; you can redistribute it and/or
  27 + *     modify it under the terms of the GNU General Public License as
  28 + *     published by the Free Software Foundation; either version 2 of the
  29 + *     License, or (at your option) any later version.
  30 + *
  31 + *     This file is distributed in the hope that it will be useful,
  32 + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  33 + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  34 + *     GNU General Public License for more details.
  35 + *
  36 + *     You should have received a copy of the GNU General Public
  37 + *     License along with this file; if not, write to the Free
  38 + *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  39 + *     MA 02110-1301 USA
  40 + *
  41 + * Or, alternatively,
  42 + *
  43 + *  b) Permission is hereby granted, free of charge, to any person
  44 + *     obtaining a copy of this software and associated documentation
  45 + *     files (the "Software"), to deal in the Software without
  46 + *     restriction, including without limitation the rights to use,
  47 + *     copy, modify, merge, publish, distribute, sublicense, and/or
  48 + *     sell copies of the Software, and to permit persons to whom the
  49 + *     Software is furnished to do so, subject to the following
  50 + *     conditions:
  51 + *
  52 + *     The above copyright notice and this permission notice shall be
  53 + *     included in all copies or substantial portions of the Software.
  54 + *
  55 + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  56 + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  57 + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  58 + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  59 + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  60 + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  61 + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  62 + *     OTHER DEALINGS IN THE SOFTWARE.
  63 + */
  64 +
  65 +/dts-v1/;
  66 +#include "sun7i-a20.dtsi"
  67 +#include "sunxi-common-regulators.dtsi"
  68 +
  69 +#include <dt-bindings/gpio/gpio.h>
  70 +#include <dt-bindings/interrupt-controller/irq.h>
  71 +#include <dt-bindings/pinctrl/sun4i-a10.h>
  72 +
  73 +/ {
  74 +       model = "Lamobo R1";
  75 +       compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
  76 +
  77 +       aliases {
  78 +               serial0 = &uart0;
  79 +               serial1 = &uart3;
  80 +               serial2 = &uart7;
  81 +       };
  82 +
  83 +       soc@01c00000 {
  84 +               spi0: spi@01c05000 {
  85 +                       pinctrl-names = "default";
  86 +                       pinctrl-0 = <&spi0_pins_a>;
  87 +                       status = "okay";
  88 +               };
  89 +
  90 +               mmc0: mmc@01c0f000 {
  91 +                       pinctrl-names = "default";
  92 +                       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
  93 +                       vmmc-supply = <&reg_vcc3v3>;
  94 +                       bus-width = <4>;
  95 +                       cd-gpios = <&pio 7 10 0>; /* PH10 */
  96 +                       cd-inverted;
  97 +                       status = "okay";
  98 +               };
  99 +
 100 +               usbphy: phy@01c13400 {
 101 +                       usb1_vbus-supply = <&reg_usb1_vbus>;
 102 +                       usb2_vbus-supply = <&reg_usb2_vbus>;
 103 +                       status = "okay";
 104 +               };
 105 +
 106 +               ehci0: usb@01c14000 {
 107 +                       status = "okay";
 108 +               };
 109 +
 110 +               ohci0: usb@01c14400 {
 111 +                       status = "okay";
 112 +               };
 113 +
 114 +               ahci: sata@01c18000 {
 115 +                       status = "okay";
 116 +               };
 117 +
 118 +               ehci1: usb@01c1c000 {
 119 +                       status = "okay";
 120 +               };
 121 +
 122 +               ohci1: usb@01c1c400 {
 123 +                       status = "okay";
 124 +               };
 125 +
 126 +               pinctrl@01c20800 {
 127 +                       mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
 128 +                               allwinner,pins = "PH10";
 129 +                               allwinner,function = "gpio_in";
 130 +                               allwinner,drive = <0>;
 131 +                               allwinner,pull = <1>;
 132 +                       };
 133 +
 134 +                       gmac_power_pin_bananapi: gmac_power_pin@0 {
 135 +                               allwinner,pins = "PH23";
 136 +                               allwinner,function = "gpio_out";
 137 +                               allwinner,drive = <0>;
 138 +                               allwinner,pull = <0>;
 139 +                       };
 140 +
 141 +                       led_pins_bananapi: led_pins@0 {
 142 +                               allwinner,pins = "PH24";
 143 +                               allwinner,function = "gpio_out";
 144 +                               allwinner,drive = <0>;
 145 +                               allwinner,pull = <0>;
 146 +                       };
 147 +
 148 +                       ahci_pwr_pin_a: ahci_pwr_pin@0 {
 149 +                               allwinner,pins = "PB3";
 150 +                               allwinner,function = "gpio_out";
 151 +                               allwinner,drive = <0>;
 152 +                               allwinner,pull = <0>;
 153 +                       };
 154 +
 155 +               };
 156 +
 157 +
 158 +               uart0: serial@01c28000 {
 159 +                       pinctrl-names = "default";
 160 +                       pinctrl-0 = <&uart0_pins_a>;
 161 +                       status = "okay";
 162 +               };
 163 +
 164 +               uart3: serial@01c28c00 {
 165 +                       pinctrl-names = "default";
 166 +                       pinctrl-0 = <&uart3_pins_b>;
 167 +                       status = "okay";
 168 +               };
 169 +
 170 +               uart7: serial@01c29c00 {
 171 +                       pinctrl-names = "default";
 172 +                       pinctrl-0 = <&uart7_pins_a>;
 173 +                       status = "okay";
 174 +               };
 175 +
 176 +               i2c0: i2c@01c2ac00 {
 177 +                       pinctrl-names = "default";
 178 +                       pinctrl-0 = <&i2c0_pins_a>;
 179 +                       status = "okay";
 180 +
 181 +                       axp209: pmic@34 {
 182 +                               compatible = "x-powers,axp209";
 183 +                               reg = <0x34>;
 184 +                               interrupt-parent = <&nmi_intc>;
 185 +                               interrupts = <0 8>;
 186 +
 187 +                               interrupt-controller;
 188 +                               #interrupt-cells = <1>;
 189 +                       };
 190 +               };
 191 +
 192 +               i2c2: i2c@01c2b400 {
 193 +                       pinctrl-names = "default";
 194 +                       pinctrl-0 = <&i2c2_pins_a>;
 195 +                       status = "okay";
 196 +               };
 197 +
 198 +               gmac: ethernet@01c50000 {
 199 +                       pinctrl-names = "default";
 200 +                       pinctrl-0 = <&gmac_pins_rgmii_a>;
 201 +                       phy = <&phy1>;
 202 +                       phy-mode = "rgmii";
 203 +                       phy-supply = <&reg_gmac_3v3>;
 204 +                       status = "okay";
 205 +
 206 +                       phy1: ethernet-phy@1 {
 207 +                               reg = <1>;
 208 +                       };
 209 +               };
 210 +       };
 211 +
 212 +       leds {
 213 +               compatible = "gpio-leds";
 214 +               pinctrl-names = "default";
 215 +               pinctrl-0 = <&led_pins_bananapi>;
 216 +
 217 +               green {
 218 +                       label = "bananapi:green:usr";
 219 +                       gpios = <&pio 7 24 0>;
 220 +               };
 221 +       };
 222 +
 223 +       reg_usb1_vbus: usb1-vbus {
 224 +               status = "okay";
 225 +       };
 226 +
 227 +       reg_usb2_vbus: usb2-vbus {
 228 +               status = "okay";
 229 +       };
 230 +
 231 +       reg_gmac_3v3: gmac-3v3 {
 232 +               compatible = "regulator-fixed";
 233 +               pinctrl-names = "default";
 234 +               pinctrl-0 = <&gmac_power_pin_bananapi>;
 235 +               regulator-name = "gmac-3v3";
 236 +               regulator-min-microvolt = <3300000>;
 237 +               regulator-max-microvolt = <3300000>;
 238 +               startup-delay-us = <100000>;
 239 +               enable-active-high;
 240 +               gpio = <&pio 7 23 0>;
 241 +       };
 242 +
 243 +       reg_ahci_5v: ahci-5v {
 244 +               compatible = "regulator-fixed";
 245 +               pinctrl-names = "default";
 246 +               pinctrl-0 = <&ahci_pwr_pin_a>;
 247 +               regulator-name = "ahci-5v";
 248 +               regulator-min-microvolt = <5000000>;
 249 +               regulator-max-microvolt = <5000000>;
 250 +               enable-active-high;
 251 +               gpio = <&pio 1 3 0>;
 252 +               status = "okay";
 253 +       };
 254 +};
 255 diff -ruN old/configs/Lamobo_R1_defconfig new/configs/Lamobo_R1_defconfig
 256 --- old/configs/Lamobo_R1_defconfig     1970-01-01 01:00:00.000000000 +0100
 257 +++ new/configs/Lamobo_R1_defconfig     2015-07-31 23:02:06.000000000 +0200
 258 @@ -0,0 +1,19 @@
 259 +CONFIG_SPL=y
 260 +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI,SATAPWR=SUNXI_GPB(3)"
 261 +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"
 262 +CONFIG_GMAC_TX_DELAY=4
 263 +CONFIG_ARM=y
 264 +CONFIG_ARCH_SUNXI=y
 265 +CONFIG_MACH_SUN7I=y
 266 +CONFIG_DRAM_CLK=432
 267 +CONFIG_DRAM_ZQ=127
 268 +CONFIG_DRAM_EMR1=4
 269 +CONFIG_ETH_DESIGNWARE=y
 270 +CONFIG_NETDEVICES=y
 271 +CONFIG_NET=y
 272 +# CONFIG_CMD_IMLS is not set
 273 +# CONFIG_CMD_FLASH is not set
 274 +# CONFIG_CMD_FPGA is not set
 275 +CONFIG_DM_SERIAL=y
 276 +CONFIG_USB=y
 277 +CONFIG_DM_USB=y