1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/leds/common.h>
11 led-boot = &led_power;
12 led-failsafe = &led_power;
13 led-running = &led_power;
14 led-upgrade = &led_power;
18 compatible = "gpio-keys";
22 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
23 linux,code = <KEY_RESTART>;
28 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
29 linux,code = <KEY_WPS_BUTTON>;
34 compatible = "gpio-leds";
37 function = LED_FUNCTION_POWER;
38 color = <LED_COLOR_ID_BLUE>;
39 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
43 label = "blue:wlan5g";
44 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
45 linux,default-trigger = "phy1tpt";
49 label = "blue:wlan2g";
50 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
51 linux,default-trigger = "phy0tpt";
68 compatible = "fixed-partitions";
80 reg = <0xe0000 0x100000>;
84 factory: partition@1e0000 {
86 reg = <0x1e0000 0x100000>;
90 compatible = "fixed-layout";
94 eeprom_factory_0: eeprom@0 {
98 eeprom_factory_8000: eeprom@8000 {
99 reg = <0x8000 0x4da8>;
102 macaddr_factory_e000: macaddr@e000 {
108 factory2: partition@2e0000 {
110 reg = <0x2e0000 0x100000>;
116 reg = <0x3e0000 0x400000>;
121 reg = <0x7e0000 0x2e00000>;
126 reg = <0x35e0000 0x3200000>;
137 compatible = "pci14c3,7615";
138 reg = <0x0000 0 0 0 0>;
139 nvmem-cells = <&eeprom_factory_0>;
140 nvmem-cell-names = "eeprom";
141 ieee80211-freq-limit = <2400000 2500000>;
147 compatible = "pci14c3,7615";
148 reg = <0x0000 0 0 0 0>;
149 nvmem-cells = <&eeprom_factory_8000>;
150 nvmem-cell-names = "eeprom";
151 ieee80211-freq-limit = <5000000 6000000>;
156 nvmem-cells = <&macaddr_factory_e000>;
157 nvmem-cell-names = "mac-address";
163 phy-handle = <ðphy0>;
165 nvmem-cells = <&macaddr_factory_e000>;
166 nvmem-cell-names = "mac-address";
170 ethphy0: ethernet-phy@0 {
201 groups = "uart2", "uart3", "i2c";