ipq40xx: convert Engenius EAP1300 to DSA

This commit converts the EAP1300 to DSA setup.

Signed-off-by: Corey Minyard <minyard@acm.org>
Link: https://github.com/openwrt/openwrt/pull/15358
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index e86d24fab5b5878e98f9c3bad7820c86d6fe056a..df0fca754424d6a5501d7a4f85bc654b3b11e16d 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -52,6 +52,7 @@ ipq40xx_setup_interfaces()
        aruba,ap-365|\
        avm,fritzrepeater-1200|\
        dlink,dap-2610|\
+       engenius,eap1300|\
        extreme-networks,ws-ap3915i|\
        meraki,mr33|\
        meraki,mr74|\

diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-eap1300.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-eap1300.dts
index e9d4775fd87ad43cb7ca72931023a3f2cb1b46ec..3629101403e6178a33f396a614de217f8a6b90d8 100644 (file)
--- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-eap1300.dts
+++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-eap1300.dts
@@ -221,6 +221,23 @@
        status = "okay";
 };
 
+&switch {
+       status = "okay";
+};
+
+&swport5 {
+       status = "okay";
+       label = "lan";
+};
+
+&gmac {
+       status = "okay";
+};
+
+&mdio {
+       status = "okay";
+};
+
 &wifi0 {
        status = "okay";
        nvmem-cell-names = "pre-calibration";