arm: Remove zipitz2 board
authorTom Rini <trini@konsulko.com>
Wed, 29 May 2019 21:01:27 +0000 (17:01 -0400)
committerJagan Teki <jagan@amarulasolutions.com>
Thu, 13 Jun 2019 07:20:55 +0000 (12:50 +0530)
Per discussion on the list, drop this board again.

Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
arch/arm/Kconfig
board/zipitz2/Kconfig [deleted file]
board/zipitz2/MAINTAINERS [deleted file]
board/zipitz2/Makefile [deleted file]
board/zipitz2/zipitz2.c [deleted file]
configs/zipitz2_defconfig [deleted file]
include/configs/zipitz2.h [deleted file]

index 01ff57cf1bec359d89620df661a9d16c434ac55e..0e82cf1583f7f6c58710a1263e0899e811504bae 100644 (file)
@@ -1410,10 +1410,6 @@ config TARGET_H2200
        bool "Support h2200"
        select CPU_PXA
 
-config TARGET_ZIPITZ2
-       bool "Support zipitz2"
-       select CPU_PXA
-
 config TARGET_COLIBRI_PXA270
        bool "Support colibri_pxa270"
        select CPU_PXA
@@ -1727,7 +1723,6 @@ source "board/woodburn/Kconfig"
 source "board/xilinx/Kconfig"
 source "board/xilinx/zynq/Kconfig"
 source "board/xilinx/zynqmp/Kconfig"
-source "board/zipitz2/Kconfig"
 
 source "arch/arm/Kconfig.debug"
 
diff --git a/board/zipitz2/Kconfig b/board/zipitz2/Kconfig
deleted file mode 100644 (file)
index c663504..0000000
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_ZIPITZ2
-
-config SYS_BOARD
-       default "zipitz2"
-
-config SYS_CONFIG_NAME
-       default "zipitz2"
-
-endif
diff --git a/board/zipitz2/MAINTAINERS b/board/zipitz2/MAINTAINERS
deleted file mode 100644 (file)
index e027cd3..0000000
+++ /dev/null
@@ -1,6 +0,0 @@
-ZIPITZ2 BOARD
-M:     Vasily Khoruzhick <anarsoul@gmail.com>
-S:     Maintained
-F:     board/zipitz2/
-F:     include/configs/zipitz2.h
-F:     configs/zipitz2_defconfig
diff --git a/board/zipitz2/Makefile b/board/zipitz2/Makefile
deleted file mode 100644 (file)
index 2bbe436..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2009
-# Marek Vasut <marek.vasut@gmail.com>
-#
-# Heavily based on pxa255_idp platform
-
-obj-y  := zipitz2.o
diff --git a/board/zipitz2/zipitz2.c b/board/zipitz2/zipitz2.c
deleted file mode 100644 (file)
index 9208c88..0000000
+++ /dev/null
@@ -1,219 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2009
- * Marek Vasut <marek.vasut@gmail.com>
- *
- * Heavily based on pxa255_idp platform
- */
-
-#include <common.h>
-#include <command.h>
-#include <serial.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa.h>
-#include <asm/arch/regs-mmc.h>
-#include <spi.h>
-#include <asm/io.h>
-#include <usb.h>
-#include <asm/mach-types.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_CMD_SPI
-void lcd_start(void);
-#else
-inline void lcd_start(void) {};
-#endif
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-int board_init(void)
-{
-       /* arch number of Z2 */
-       gd->bd->bi_arch_number = MACH_TYPE_ZIPIT2;
-
-       /* adress of boot parameters */
-       gd->bd->bi_boot_params = 0xa0000100;
-
-       /* Enable LCD */
-       lcd_start();
-
-       return 0;
-}
-
-int dram_init(void)
-{
-       pxa2xx_dram_init();
-       gd->ram_size = PHYS_SDRAM_1_SIZE;
-       return 0;
-}
-
-#ifdef CONFIG_CMD_USB
-int board_usb_init(int index, enum usb_init_type init)
-{
-       /* enable port 2 */
-       writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
-               UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
-
-       return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-       return 0;
-}
-
-void usb_board_stop(void)
-{
-}
-#endif
-
-int dram_init_banksize(void)
-{
-       gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-       gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-       return 0;
-}
-
-#ifdef CONFIG_CMD_MMC
-int board_mmc_init(bd_t *bis)
-{
-       pxa_mmc_register(0);
-       return 0;
-}
-#endif
-
-#ifdef CONFIG_CMD_SPI
-
-struct {
-       unsigned char   reg;
-       unsigned short  data;
-       unsigned char   mdelay;
-} lcd_data[] = {
-       { 0x07, 0x0000, 0 },
-       { 0x13, 0x0000, 10 },
-       { 0x11, 0x3004, 0 },
-       { 0x14, 0x200F, 0 },
-       { 0x10, 0x1a20, 0 },
-       { 0x13, 0x0040, 50 },
-       { 0x13, 0x0060, 0 },
-       { 0x13, 0x0070, 200 },
-       { 0x01, 0x0127, 0 },
-       { 0x02, 0x0700, 0 },
-       { 0x03, 0x1030, 0 },
-       { 0x08, 0x0208, 0 },
-       { 0x0B, 0x0620, 0 },
-       { 0x0C, 0x0110, 0 },
-       { 0x30, 0x0120, 0 },
-       { 0x31, 0x0127, 0 },
-       { 0x32, 0x0000, 0 },
-       { 0x33, 0x0503, 0 },
-       { 0x34, 0x0727, 0 },
-       { 0x35, 0x0124, 0 },
-       { 0x36, 0x0706, 0 },
-       { 0x37, 0x0701, 0 },
-       { 0x38, 0x0F00, 0 },
-       { 0x39, 0x0F00, 0 },
-       { 0x40, 0x0000, 0 },
-       { 0x41, 0x0000, 0 },
-       { 0x42, 0x013f, 0 },
-       { 0x43, 0x0000, 0 },
-       { 0x44, 0x013f, 0 },
-       { 0x45, 0x0000, 0 },
-       { 0x46, 0xef00, 0 },
-       { 0x47, 0x013f, 0 },
-       { 0x48, 0x0000, 0 },
-       { 0x07, 0x0015, 30 },
-       { 0x07, 0x0017, 0 },
-       { 0x20, 0x0000, 0 },
-       { 0x21, 0x0000, 0 },
-       { 0x22, 0x0000, 0 },
-};
-
-void zipitz2_spi_sda(int set)
-{
-       /* GPIO 13 */
-       if (set)
-               writel((1 << 13), GPSR0);
-       else
-               writel((1 << 13), GPCR0);
-}
-
-void zipitz2_spi_scl(int set)
-{
-       /* GPIO 22 */
-       if (set)
-               writel((1 << 22), GPCR0);
-       else
-               writel((1 << 22), GPSR0);
-}
-
-unsigned char zipitz2_spi_read(void)
-{
-       /* GPIO 40 */
-       return !!(readl(GPLR1) & (1 << 8));
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-       /* Always valid */
-       return 1;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-       /* GPIO 88 low */
-       writel((1 << 24), GPCR2);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-       /* GPIO 88 high */
-       writel((1 << 24), GPSR2);
-}
-
-void lcd_start(void)
-{
-       int i;
-       unsigned char reg[3] = { 0x74, 0x00, 0 };
-       unsigned char data[3] = { 0x76, 0, 0 };
-       unsigned char dummy[3] = { 0, 0, 0 };
-
-       /* PWM2 AF */
-       writel(readl(GAFR0_L) | 0x00800000, GAFR0_L);
-       /* Enable clock to all PWM */
-       writel(readl(CKEN) | 0x3, CKEN);
-       /* Configure PWM2 */
-       writel(0x4f, PWM_CTRL2);
-       writel(0x2ff, PWM_PWDUTY2);
-       writel(792, PWM_PERVAL2);
-
-       /* Toggle the reset pin to reset the LCD */
-       writel((1 << 19), GPSR0);
-       udelay(100000);
-       writel((1 << 19), GPCR0);
-       udelay(20000);
-       writel((1 << 19), GPSR0);
-       udelay(20000);
-
-       /* Program the LCD init sequence */
-       for (i = 0; i < sizeof(lcd_data) / sizeof(lcd_data[0]); i++) {
-               reg[0] = 0x74;
-               reg[1] = 0x0;
-               reg[2] = lcd_data[i].reg;
-               spi_xfer(NULL, 24, reg, dummy, SPI_XFER_BEGIN | SPI_XFER_END);
-
-               data[0] = 0x76;
-               data[1] = lcd_data[i].data >> 8;
-               data[2] = lcd_data[i].data & 0xff;
-               spi_xfer(NULL, 24, data, dummy, SPI_XFER_BEGIN | SPI_XFER_END);
-
-               if (lcd_data[i].mdelay)
-                       udelay(lcd_data[i].mdelay * 1000);
-       }
-
-       writel((1 << 11), GPSR0);
-}
-#endif
diff --git a/configs/zipitz2_defconfig b/configs/zipitz2_defconfig
deleted file mode 100644 (file)
index 509adcf..0000000
+++ /dev/null
@@ -1,34 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_ZIPITZ2=y
-CONFIG_SYS_TEXT_BASE=0x0
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=tty0 console=ttyS2,115200 fbcon=rotate:3"
-# CONFIG_CONSOLE_MUX is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="$ "
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_FLASH=y
-# CONFIG_NET is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_CONS_INDEX=2
-CONFIG_PXA_SERIAL=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
-CONFIG_LZMA=y
-CONFIG_OF_LIBFDT=y
-# CONFIG_EFI_LOADER is not set
diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
deleted file mode 100644 (file)
index 24fea68..0000000
+++ /dev/null
@@ -1,186 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Aeronix Zipit Z2 configuration file
- *
- * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Board Configuration Options
- */
-#define        CONFIG_CPU_PXA27X               1       /* Marvell PXA270 CPU */
-
-#undef CONFIG_SKIP_LOWLEVEL_INIT
-#define        CONFIG_PREBOOT
-
-/*
- * Environment settings
- */
-#define        CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_ADDR                        0x40000
-#define CONFIG_ENV_SIZE                        0x10000
-
-#define        CONFIG_SYS_MALLOC_LEN           (128*1024)
-#define        CONFIG_ARCH_CPU_INIT
-
-#define        CONFIG_BOOTCOMMAND                                              \
-       "if mmc rescan && ext2load mmc 0 0xa0000000 boot/uboot.script ;"\
-       "then "                                                         \
-               "source 0xa0000000; "                                   \
-       "else "                                                         \
-               "bootm 0x50000; "                                       \
-       "fi; "
-#define        CONFIG_TIMESTAMP
-#define        CONFIG_CMDLINE_TAG
-#define        CONFIG_SETUP_MEMORY_TAGS
-
-/*
- * Serial Console Configuration
- * STUART - the lower serial port on Colibri board
- */
-#define        CONFIG_STUART                   1
-
-/*
- * Bootloader Components Configuration
- */
-
-/*
- * MMC Card Configuration
- */
-#ifdef CONFIG_CMD_MMC
-#define        CONFIG_PXA_MMC_GENERIC
-#define        CONFIG_SYS_MMC_BASE             0xF0000000
-#endif
-
-/*
- * SPI and LCD
- */
-#ifdef CONFIG_CMD_SPI
-#define        CONFIG_SOFT_SPI
-#define        CONFIG_LCD_ROTATION
-#define        CONFIG_PXA_LCD
-#define        CONFIG_LMS283GF05
-
-#define        SPI_DELAY       udelay(10)
-#define        SPI_SDA(val)    zipitz2_spi_sda(val)
-#define        SPI_SCL(val)    zipitz2_spi_scl(val)
-#define        SPI_READ        zipitz2_spi_read()
-#ifndef        __ASSEMBLY__
-void zipitz2_spi_sda(int);
-void zipitz2_spi_scl(int);
-unsigned char zipitz2_spi_read(void);
-#endif
-#endif
-
-#define        CONFIG_SYS_DEVICE_NULLDEV       1
-
-/*
- * Clock Configuration
- */
-#define CONFIG_SYS_CPUSPEED            0x190           /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */
-
-/*
- * SRAM Map
- */
-#define        PHYS_SRAM                       0x5c000000      /* SRAM Bank #1 */
-#define        PHYS_SRAM_SIZE                  0x00040000      /* 256k */
-
-/*
- * DRAM Map
- */
-#define        PHYS_SDRAM_1                    0xa0000000      /* SDRAM Bank #1 */
-#define        PHYS_SDRAM_1_SIZE               0x02000000      /* 32 MB */
-
-#define        CONFIG_SYS_DRAM_BASE            0xa0000000      /* CS0 */
-#define        CONFIG_SYS_DRAM_SIZE            0x02000000      /* 32 MB DRAM */
-
-#define CONFIG_SYS_MEMTEST_START       0xa0400000      /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM */
-
-#define        CONFIG_SYS_LOAD_ADDR            CONFIG_SYS_DRAM_BASE
-
-#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
-#define        CONFIG_SYS_INIT_SP_ADDR         (GENERATED_GBL_DATA_SIZE + PHYS_SRAM + 2048)
-
-/*
- * NOR FLASH
- */
-#define PHYS_FLASH_1                   0x00000000      /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE                        0x00800000      /* 8 MB */
-#define PHYS_FLASH_SECT_SIZE           0x00010000      /* 64 KB sectors */
-#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
-
-#define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
-
-#define CONFIG_SYS_MONITOR_BASE                PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN         PHYS_FLASH_SECT_SIZE
-
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
-#define CONFIG_SYS_MAX_FLASH_SECT      256
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT    240000
-#define CONFIG_SYS_FLASH_WRITE_TOUT    240000
-#define CONFIG_SYS_FLASH_LOCK_TOUT     240000
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT   240000
-
-/*
- * GPIO settings
- */
-#define CONFIG_SYS_GAFR0_L_VAL 0x02000140
-#define CONFIG_SYS_GAFR0_U_VAL 0x59188000
-#define CONFIG_SYS_GAFR1_L_VAL 0x63900002
-#define CONFIG_SYS_GAFR1_U_VAL 0xaaa03950
-#define CONFIG_SYS_GAFR2_L_VAL 0x0aaaaaaa
-#define CONFIG_SYS_GAFR2_U_VAL 0x29000308
-#define CONFIG_SYS_GAFR3_L_VAL 0x54000000
-#define CONFIG_SYS_GAFR3_U_VAL 0x000000d5
-#define CONFIG_SYS_GPCR0_VAL   0x00000000
-#define CONFIG_SYS_GPCR1_VAL   0x00000020
-#define CONFIG_SYS_GPCR2_VAL   0x00000000
-#define CONFIG_SYS_GPCR3_VAL   0x00000000
-#define CONFIG_SYS_GPDR0_VAL   0xdafcee00
-#define CONFIG_SYS_GPDR1_VAL   0xffa3aaab
-#define CONFIG_SYS_GPDR2_VAL   0x8fe9ffff
-#define CONFIG_SYS_GPDR3_VAL   0x001b1f8a
-#define CONFIG_SYS_GPSR0_VAL   0x06080400
-#define CONFIG_SYS_GPSR1_VAL   0x007f0000
-#define CONFIG_SYS_GPSR2_VAL   0x032a0000
-#define CONFIG_SYS_GPSR3_VAL   0x00000180
-
-#define CONFIG_SYS_PSSR_VAL    0x30
-
-/*
- * Clock settings
- */
-#define CONFIG_SYS_CKEN                0x00511220
-#define CONFIG_SYS_CCCR                0x00000190
-
-/*
- * Memory settings
- */
-#define CONFIG_SYS_MSC0_VAL    0x2ffc38f8
-#define CONFIG_SYS_MSC1_VAL    0x0000ccd1
-#define CONFIG_SYS_MSC2_VAL    0x0000b884
-#define CONFIG_SYS_MDCNFG_VAL  0x08000ba9
-#define CONFIG_SYS_MDREFR_VAL  0x2011a01e
-#define CONFIG_SYS_MDMRS_VAL   0x00000000
-#define CONFIG_SYS_FLYCNFG_VAL 0x00010001
-#define CONFIG_SYS_SXCNFG_VAL  0x40044004
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL    0x00000001
-#define CONFIG_SYS_MCMEM0_VAL  0x00014307
-#define CONFIG_SYS_MCMEM1_VAL  0x00014307
-#define CONFIG_SYS_MCATT0_VAL  0x0001c787
-#define CONFIG_SYS_MCATT1_VAL  0x0001c787
-#define CONFIG_SYS_MCIO0_VAL   0x0001430f
-#define CONFIG_SYS_MCIO1_VAL   0x0001430f
-
-#include "pxa-common.h"
-
-#endif /* __CONFIG_H */