target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network

   1 #
   2 # Copyright (c) 2015 The Linux Foundation. All rights reserved.
   3 # Copyright (c) 2011-2015 OpenWrt.org
   4 #
   5
   6 . /lib/functions/uci-defaults.sh
   7 . /lib/functions/system.sh
   8
   9 ipq807x_setup_interfaces()
  10 {
  11         local board="$1"
  12
  13         case "$board" in
  14         arcadyan,aw1000|\
  15         buffalo,wxr-5950ax12|\
  16         dynalink,dl-wrx36|\
  17         xiaomi,ax9000)
  18                 ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
  19                 ;;
  20         compex,wpq873|\
  21         linksys,mx4200v1|\
  22         linksys,mx4200v2|\
  23         redmi,ax6|\
  24         xiaomi,ax3600)
  25                 ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
  26                 ;;
  27         edgecore,eap102|\
  28         yuncore,ax880|\
  29         zte,mf269)
  30                 ucidef_set_interfaces_lan_wan "lan" "wan"
  31                 ;;
  32         edimax,cax1800)
  33                 ucidef_set_interfaces_lan_wan "lan"
  34                 ;;
  35         netgear,rax120v2)
  36                 ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" "wan"
  37                 ;;
  38         netgear,wax218|\
  39         netgear,wax620)
  40                 ucidef_set_interface_lan "lan" "dhcp"
  41                 ;;
  42         netgear,wax630)
  43                 ucidef_set_interface_lan "lan1 lan2" "dhcp"
  44                 ;;
  45         prpl,haze)
  46                 ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
  47                 ;;
  48         qnap,301w)
  49                 ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g-2" "10g-1"
  50                 ;;
  51         zyxel,nbg7815)
  52                 ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g" "wan"
  53                 ;;
  54         *)
  55                 echo "Unsupported hardware. Network interfaces not initialized"
  56                 ;;
  57         esac
  58 }
  59
  60 ipq807x_setup_macs()
  61 {
  62         local board="$1"
  63         local lan_mac=""
  64         local wan_mac=""
  65         local label_mac=""
  66
  67         case "$board" in
  68                 linksys,mx4200v1|\
  69                 linksys,mx4200v2)
  70                         label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
  71                         for i in $(seq 3 5); do
  72                                 [ "$(mtd_get_mac_ascii u_env eth${i}addr)" != "$label_mac" ] && lan_mac=$label_mac
  73                         done
  74                         [ "$(mtd_get_mac_ascii u_env eth2addr)" != "$label_mac" ] && wan_mac=$label_mac
  75                 ;;
  76         esac
  77
  78         [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
  79         [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
  80         [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
  81 }
  82
  83 board_config_update
  84 board=$(board_name)
  85 ipq807x_setup_interfaces $board
  86 ipq807x_setup_macs $board
  87 board_config_flush
  88
  89 exit 0