From 8fc48229c831561f2d69e5abd21dcfe5de89dde1 Mon Sep 17 00:00:00 2001 From: "Matwey V. Kornilov" Date: Sun, 9 Jun 2019 00:27:18 +0300 Subject: [PATCH] doc: rockchip: Add note for Pine64 Rock64 board Add build notes for Pine64 Rock64 board. Signed-off-by: Matwey V. Kornilov Reviewed-by: Kever Yang --- doc/README.rockchip | 30 ++++++++++++++++++++++++++++-- 1 file changed, 28 insertions(+), 2 deletions(-) diff --git a/doc/README.rockchip b/doc/README.rockchip index 264f7e4994..11ab74a103 100644 --- a/doc/README.rockchip +++ b/doc/README.rockchip @@ -48,9 +48,10 @@ Two RK3036 boards are supported: - EVB RK3036 - use evb-rk3036 configuration - Kylin - use kylin_rk3036 configuration -One RK3328 board is supported: +Two RK3328 board are supported: - - EVB RK3328 + - EVB RK3328 - use evb-rk3328_defconfig + - Pine64 Rock64 board - use rock64-rk3328_defconfig Size RK3399 boards are supported (aarch64): @@ -310,6 +311,31 @@ tools/mkimage -n rk3188 -T rksd -d spl/u-boot-spl.bin out truncate -s %2048 u-boot.bin cat u-boot.bin | split -b 512 --filter='openssl rc4 -K 7C4E0304550509072D2C7B38170D1711' >> out +Booting from an SD card on Pine64 Rock64 (RK3328) +================================================= + +For Rock64 rk3328 board the following three parts are required: +TPL, SPL, and the u-boot image tree blob. While u-boot-spl.bin and +u-boot.itb are to be compiled as usual, TPL is currently not +implemented in u-boot, so you need to pick one from rkbin: + + - Get the rkbin + + => git clone https://github.com/rockchip-linux/rkbin.git + + - Create TPL/SPL image + + => tools/mkimage -n rk3328 -T rksd -d rkbin/bin/rk33/rk3328_ddr_333MHz_v1.16.bin idbloader.img + => cat spl/u-boot-spl.bin >> idbloader.img + + - Write TPL/SPL image at 64 sector + + => sudo dd if=idbloader.img of=/dev/mmcblk0 seek=64 + + - Write u-boot image tree blob at 16384 sector + + => sudo dd if=u-boot.itb of=/dev/mmcblk0 seek=16384 + Booting from an SD card on RK3399 ================================= -- 2.30.2