ath79: add support for TP-Link RE455 v1

TP-Link RE455 v1 is a dual band router/range-extender based on
Qualcomm/Atheros QCA9563 + QCA9880.

This device is nearly identical to RE450 v3

Specification:

- 775 MHz CPU
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 3T3R 5 GHz
- 1x 10/100/1000 Mbps Ethernet (AR8033 PHY)
- 7x LED, 4x button
- UART header on PCB[1]

Flash instruction:
Apply factory image in OEM firmware web-gui.

[1] Didn't work, probably need to short unpopulated resistor R64
    and R69 as RE450v3

Signed-off-by: Roberto Valentini <valantin89@gmail.com>

diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c
index 432044882c1d0a1554b568262e15e5db47c76df0..4e7549d5e6b8aab7136b912d3d7444526b2cc4d9 100644 (file)
--- a/src/tplink-safeloader.c
+++ b/src/tplink-safeloader.c
@@ -2431,6 +2431,46 @@ static struct device_info boards[] = {
                .last_sysupgrade_partition = "file-system"
        },
 
+       /** Firmware layout for the RE455 v1 */
+       {
+               .id     = "RE455-V1",
+               .vendor = "",
+               .support_list =
+                       "SupportList:\r\n"
+                       "{product_name:RE455,product_ver:1.0.0,special_id:00000000}\r\n"
+                       "{product_name:RE455,product_ver:1.0.0,special_id:55530000}\r\n"
+                       "{product_name:RE455,product_ver:1.0.0,special_id:45550000}\r\n"
+                       "{product_name:RE455,product_ver:1.0.0,special_id:4A500000}\r\n"
+                       "{product_name:RE455,product_ver:1.0.0,special_id:43410000}\r\n"
+                       "{product_name:RE455,product_ver:1.0.0,special_id:41550000}\r\n"
+                       "{product_name:RE455,product_ver:1.0.0,special_id:41530000}\r\n"
+                       "{product_name:RE455,product_ver:1.0.0,special_id:4B520000}\r\n"
+                       "{product_name:RE455,product_ver:1.0.0,special_id:42520000}\r\n",
+               .part_trail = 0x00,
+               .soft_ver = NULL,
+
+               /* We're using a dynamic kernel/rootfs split here */
+               .partitions = {
+                       {"fs-uboot", 0x00000, 0x20000},
+                       {"default-mac", 0x20000, 0x00020},
+                       {"pin", 0x20020, 0x00020},
+                       {"product-info", 0x21000, 0x01000},
+                       {"partition-table", 0x22000, 0x02000},
+                       {"soft-version", 0x24000, 0x01000},
+                       {"support-list", 0x25000, 0x01000},
+                       {"profile", 0x26000, 0x08000},
+                       {"user-config", 0x2e000, 0x10000},
+                       {"default-config", 0x3e000, 0x10000},
+                       {"config-info", 0x4e000, 0x00400},
+                       {"firmware", 0x50000, 0x7a0000},
+                       {"radio", 0x7f0000, 0x10000},
+                       {NULL, 0, 0}
+               },
+
+               .first_sysupgrade_partition = "os-image",
+               .last_sysupgrade_partition = "file-system"
+       },
+
        /** Firmware layout for the RE500 */
        {
                .id     = "RE500-V1",