target/linux/ath79/dts/qca9531_comfast_cf-wr752ac-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca953x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "comfast,cf-wr752ac-v1", "qca,qca9531";
  10         model = "COMFAST CF-WR752AC v1";
  11
  12         aliases {
  13                 serial0 = &uart;
  14                 led-boot = &led_lan;
  15                 led-failsafe = &led_lan;
  16                 led-upgrade = &led_lan;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 pinctrl-names = "default";
  23                 pinctrl-0 = <&jtag_disable_pins &pinmux_led_rssihigh &pinmux_led_rssilow>;
  24
  25                 led_lan: lan {
  26                         label = "blue:lan";
  27                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 rssihigh {
  31                         label = "green:rssihigh";
  32                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 rssilow {
  36                         label = "red:rssilow";
  37                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  38                 };
  39         };
  40
  41         keys {
  42                 compatible = "gpio-keys";
  43
  44                 button {
  45                         label = "reset";
  46                         linux,code = <KEY_RESTART>;
  47                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  48                         debounce-interval = <60>;
  49                 };
  50         };
  51 };
  52
  53 &pinmux {
  54         pinmux_led_rssihigh: pinmux_led_rssihigh {
  55                 pinctrl-single,bits = <0xc 0x0 0xff000000>;
  56         };
  57
  58         pinmux_led_rssilow: pinmux_led_rssilow {
  59                 pinctrl-single,bits = <0x8 0x0 0xff000000>;
  60         };
  61 };
  62
  63 &pcie0 {
  64         status = "okay";
  65 };
  66
  67 &spi {
  68         status = "okay";
  69
  70         flash@0 {
  71                 compatible = "jedec,spi-nor";
  72                 reg = <0>;
  73                 spi-max-frequency = <25000000>;
  74
  75                 partitions {
  76                         compatible = "fixed-partitions";
  77                         #address-cells = <1>;
  78                         #size-cells = <1>;
  79
  80                         partition@0 {
  81                                 label = "u-boot";
  82                                 reg = <0x000000 0x010000>;
  83                                 read-only;
  84                         };
  85
  86                         art: partition@10000 {
  87                                 label = "art";
  88                                 reg = <0x010000 0x010000>;
  89                                 read-only;
  90
  91                                 nvmem-layout {
  92                                         compatible = "fixed-layout";
  93                                         #address-cells = <1>;
  94                                         #size-cells = <1>;
  95
  96                                         macaddr_art_0: macaddr@0 {
  97                                                 compatible = "mac-base";
  98                                                 reg = <0x0 0x6>;
  99                                                 #nvmem-cell-cells = <1>;
 100                                         };
 101                                 };
 102                         };
 103
 104                         partition@20000 {
 105                                 compatible = "denx,uimage";
 106                                 label = "firmware";
 107                                 reg = <0x020000 0xfd0000>;
 108                         };
 109
 110                         partition@ff0000 {
 111                                 label = "nvram";
 112                                 reg = <0xff0000 0x010000>;
 113                                 read-only;
 114                         };
 115                 };
 116         };
 117 };
 118
 119 &eth0 {
 120         status = "okay";
 121
 122         phy-handle = <&swphy4>;
 123
 124         nvmem-cells = <&macaddr_art_0 0>;
 125         nvmem-cell-names = "mac-address";
 126 };
 127
 128 &eth1 {
 129         compatible = "syscon", "simple-mfd";
 130 };
 131
 132 &wmac {
 133         status = "okay";
 134
 135         mtd-cal-data = <&art 0x1000>;
 136
 137         nvmem-cells = <&macaddr_art_0 10>;
 138         nvmem-cell-names = "mac-address";
 139 };