arch/mips/mach-mt7620/cpu.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright (C) 2018 Stefan Roese <sr@denx.de>
   4  */
   5
   6 #include <common.h>
   7 #include <dm.h>
   8 #include <ram.h>
   9 #include <wdt.h>
  10 #include <asm/io.h>
  11 #include <linux/io.h>
  12 #include <linux/sizes.h>
  13 #include "mt76xx.h"
  14
  15 #define STR_LEN                 6
  16
  17 #ifdef CONFIG_BOOT_ROM
  18 int mach_cpu_init(void)
  19 {
  20         ddr_calibrate();
  21
  22         return 0;
  23 }
  24 #endif
  25
  26 int dram_init(void)
  27 {
  28         gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, SZ_256M);
  29
  30         return 0;
  31 }
  32
  33 int print_cpuinfo(void)
  34 {
  35         static const char * const boot_str[] = { "PLL (3-Byte SPI Addr)",
  36                                                  "PLL (4-Byte SPI Addr)",
  37                                                  "XTAL (3-Byte SPI Addr)",
  38                                                  "XTAL (4-Byte SPI Addr)" };
  39         const void *blob = gd->fdt_blob;
  40         void __iomem *sysc_base;
  41         char buf[STR_LEN + 1];
  42         fdt_addr_t base;
  43         fdt_size_t size;
  44         char *str;
  45         int node;
  46         u32 val;
  47
  48         /* Get system controller base address */
  49         node = fdt_node_offset_by_compatible(blob, -1, "ralink,mt7620a-sysc");
  50         if (node < 0)
  51                 return -FDT_ERR_NOTFOUND;
  52
  53         base = fdtdec_get_addr_size_auto_noparent(blob, node, "reg",
  54                                                   0, &size, true);
  55         if (base == FDT_ADDR_T_NONE)
  56                 return -EINVAL;
  57
  58         sysc_base = ioremap_nocache(base, size);
  59
  60         str = (char *)sysc_base + MT76XX_CHIPID_OFFS;
  61         snprintf(buf, STR_LEN + 1, "%s", str);
  62         val = readl(sysc_base + MT76XX_CHIP_REV_ID_OFFS);
  63         printf("CPU:   %-*s Rev %ld.%ld - ", STR_LEN, buf,
  64                (val & GENMASK(11, 8)) >> 8, val & GENMASK(3, 0));
  65
  66         val = (readl(sysc_base + MT76XX_SYSCFG0_OFFS) & GENMASK(3, 1)) >> 1;
  67         printf("Boot from %s\n", boot_str[val]);
  68
  69         return 0;
  70 }
  71
  72 int arch_misc_init(void)
  73 {
  74         /*
  75          * It has been noticed, that sometimes the d-cache is not in a
  76          * "clean-state" when U-Boot is running on MT7688. This was
  77          * detected when using the ethernet driver (which uses d-cache)
  78          * and a TFTP command does not complete. Flushing the complete
  79          * d-cache (again?) here seems to fix this issue.
  80          */
  81         flush_dcache_range(gd->bd->bi_memstart,
  82                            gd->bd->bi_memstart + gd->ram_size - 1);
  83
  84         return 0;
  85 }