Revert "xl2tpd: rename netifd protocol handler to l2tpv2 to avoid clashes with l2tpv3"

This reverts commit 981f2da45747df72c5ae2c45f265fe8f29af3d52.
OpenWrt wiki knew l2tp from l2tpv3tun, but luci knew l2tp from xl2tpd

diff --git a/net/xl2tpd/Makefile b/net/xl2tpd/Makefile
index 4e108ab809d64ad10a69d9f6a9f0bcde64ae6ff9..7d1f932f358d90b2bb22bc692a938eef02cb7768 100644 (file)
--- a/net/xl2tpd/Makefile
+++ b/net/xl2tpd/Makefile
@@ -65,7 +65,7 @@ define Package/xl2tpd/install
        $(INSTALL_DATA) ./files/options.xl2tpd $(1)/etc/ppp/
 
        $(INSTALL_DIR) $(1)/lib/netifd/proto
-       $(INSTALL_BIN) ./files/l2tpv2.sh $(1)/lib/netifd/proto
+       $(INSTALL_BIN) ./files/l2tp.sh $(1)/lib/netifd/proto
 endef
 
 $(eval $(call BuildPackage,xl2tpd))

diff --git a/net/xl2tpd/files/l2tp.sh b/net/xl2tpd/files/l2tp.sh
new file mode 100644 (file)
index 0000000..867234d
--- /dev/null
+++ b/net/xl2tpd/files/l2tp.sh
@@ -0,0 +1,107 @@
+#!/bin/sh
+
+[ -x /usr/sbin/xl2tpd ] || exit 0
+
+[ -n "$INCLUDE_ONLY" ] || {
+       . /lib/functions.sh
+       . ../netifd-proto.sh
+       init_proto "$@"
+}
+
+proto_l2tp_init_config() {
+       proto_config_add_string "username"
+       proto_config_add_string "password"
+       proto_config_add_string "keepalive"
+       proto_config_add_string "pppd_options"
+       proto_config_add_boolean "ipv6"
+       proto_config_add_int "mtu"
+       proto_config_add_string "server"
+       available=1
+       no_device=1
+}
+
+proto_l2tp_setup() {
+       local config="$1"
+       local iface="$2"
+       local optfile="/tmp/l2tp/options.${config}"
+
+       local ip serv_addr server
+       json_get_var server server && {
+               for ip in $(resolveip -t 5 "$server"); do
+                       ( proto_add_host_dependency "$config" "$ip" )
+                       serv_addr=1
+               done
+       }
+       [ -n "$serv_addr" ] || {
+               echo "Could not resolve server address"
+               sleep 5
+               proto_setup_failed "$config"
+               exit 1
+       }
+
+       if [ ! -p /var/run/xl2tpd/l2tp-control ]; then
+               /etc/init.d/xl2tpd start
+       fi
+
+       json_get_vars ipv6 demand keepalive username password pppd_options
+       [ "$ipv6" = 1 ] || ipv6=""
+       if [ "${demand:-0}" -gt 0 ]; then
+               demand="precompiled-active-filter /etc/ppp/filter demand idle $demand"
+       else
+               demand="persist"
+       fi
+
+       [ -n "$mtu" ] || json_get_var mtu mtu
+
+       local interval="${keepalive##*[, ]}"
+       [ "$interval" != "$keepalive" ] || interval=5
+
+       mkdir -p /tmp/l2tp
+
+       echo "${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive%%[, ]*}}" > "${optfile}"
+       echo "usepeerdns" >> "${optfile}"
+       echo "nodefaultroute" >> "${optfile}"
+       echo "${username:+user \"$username\" password \"$password\"}" >> "${optfile}"
+       echo "ipparam \"$config\"" >> "${optfile}"
+       echo "ifname \"l2tp-$config\"" >> "${optfile}"
+       echo "ip-up-script /lib/netifd/ppp-up" >> "${optfile}"
+       echo "ipv6-up-script /lib/netifd/ppp-up" >> "${optfile}"
+       echo "ip-down-script /lib/netifd/ppp-down" >> "${optfile}"
+       echo "ipv6-down-script /lib/netifd/ppp-down" >> "${optfile}"
+       # Don't wait for LCP term responses; exit immediately when killed.
+       echo "lcp-max-terminate 0" >> "${optfile}"
+       echo "${ipv6:++ipv6} ${pppd_options}" >> "${optfile}"
+       echo "${mtu:+mtu $mtu mru $mtu}" >> "${optfile}"
+
+       xl2tpd-control add l2tp-${config} pppoptfile=${optfile} lns=${server} redial=yes redial timeout=20
+       xl2tpd-control connect l2tp-${config}
+}
+
+proto_l2tp_teardown() {
+       local interface="$1"
+       local optfile="/tmp/l2tp/options.${interface}"
+
+       case "$ERROR" in
+               11|19)
+                       proto_notify_error "$interface" AUTH_FAILED
+                       proto_block_restart "$interface"
+               ;;
+               2)
+                       proto_notify_error "$interface" INVALID_OPTIONS
+                       proto_block_restart "$interface"
+               ;;
+       esac
+
+       xl2tpd-control disconnect l2tp-${interface}
+       # Wait for interface to go down
+        while [ -d /sys/class/net/l2tp-${interface} ]; do
+               sleep 1
+       done
+
+       xl2tpd-control remove l2tp-${interface}
+       rm -f ${optfile}
+}
+
+[ -n "$INCLUDE_ONLY" ] || {
+       add_protocol l2tp
+}

diff --git a/net/xl2tpd/files/l2tpv2.sh b/net/xl2tpd/files/l2tpv2.sh
deleted file mode 100644 (file)
index 6466cf0..0000000
--- a/net/xl2tpd/files/l2tpv2.sh
+++ /dev/null
@@ -1,107 +0,0 @@
-#!/bin/sh
-
-[ -x /usr/sbin/xl2tpd ] || exit 0
-
-[ -n "$INCLUDE_ONLY" ] || {
-       . /lib/functions.sh
-       . ../netifd-proto.sh
-       init_proto "$@"
-}
-
-proto_l2tpv2_init_config() {
-       proto_config_add_string "username"
-       proto_config_add_string "password"
-       proto_config_add_string "keepalive"
-       proto_config_add_string "pppd_options"
-       proto_config_add_boolean "ipv6"
-       proto_config_add_int "mtu"
-       proto_config_add_string "server"
-       available=1
-       no_device=1
-}
-
-proto_l2tpv2_setup() {
-       local config="$1"
-       local iface="$2"
-       local optfile="/tmp/l2tp/options.${config}"
-
-       local ip serv_addr server
-       json_get_var server server && {
-               for ip in $(resolveip -t 5 "$server"); do
-                       ( proto_add_host_dependency "$config" "$ip" )
-                       serv_addr=1
-               done
-       }
-       [ -n "$serv_addr" ] || {
-               echo "Could not resolve server address"
-               sleep 5
-               proto_setup_failed "$config"
-               exit 1
-       }
-
-       if [ ! -p /var/run/xl2tpd/l2tp-control ]; then
-               /etc/init.d/xl2tpd start
-       fi
-
-       json_get_vars ipv6 demand keepalive username password pppd_options
-       [ "$ipv6" = 1 ] || ipv6=""
-       if [ "${demand:-0}" -gt 0 ]; then
-               demand="precompiled-active-filter /etc/ppp/filter demand idle $demand"
-       else
-               demand="persist"
-       fi
-
-       [ -n "$mtu" ] || json_get_var mtu mtu
-
-       local interval="${keepalive##*[, ]}"
-       [ "$interval" != "$keepalive" ] || interval=5
-
-       mkdir -p /tmp/l2tp
-
-       echo "${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive%%[, ]*}}" > "${optfile}"
-       echo "usepeerdns" >> "${optfile}"
-       echo "nodefaultroute" >> "${optfile}"
-       echo "${username:+user \"$username\" password \"$password\"}" >> "${optfile}"
-       echo "ipparam \"$config\"" >> "${optfile}"
-       echo "ifname \"l2tp-$config\"" >> "${optfile}"
-       echo "ip-up-script /lib/netifd/ppp-up" >> "${optfile}"
-       echo "ipv6-up-script /lib/netifd/ppp-up" >> "${optfile}"
-       echo "ip-down-script /lib/netifd/ppp-down" >> "${optfile}"
-       echo "ipv6-down-script /lib/netifd/ppp-down" >> "${optfile}"
-       # Don't wait for LCP term responses; exit immediately when killed.
-       echo "lcp-max-terminate 0" >> "${optfile}"
-       echo "${ipv6:++ipv6} ${pppd_options}" >> "${optfile}"
-       echo "${mtu:+mtu $mtu mru $mtu}" >> "${optfile}"
-
-       xl2tpd-control add l2tp-${config} pppoptfile=${optfile} lns=${server} redial=yes redial timeout=20
-       xl2tpd-control connect l2tp-${config}
-}
-
-proto_l2tpv2_teardown() {
-       local interface="$1"
-       local optfile="/tmp/l2tp/options.${interface}"
-
-       case "$ERROR" in
-               11|19)
-                       proto_notify_error "$interface" AUTH_FAILED
-                       proto_block_restart "$interface"
-               ;;
-               2)
-                       proto_notify_error "$interface" INVALID_OPTIONS
-                       proto_block_restart "$interface"
-               ;;
-       esac
-
-       xl2tpd-control disconnect l2tp-${interface}
-       # Wait for interface to go down
-        while [ -d /sys/class/net/l2tp-${interface} ]; do
-               sleep 1
-       done
-
-       xl2tpd-control remove l2tp-${interface}
-       rm -f ${optfile}
-}
-
-[ -n "$INCLUDE_ONLY" ] || {
-       add_protocol l2tpv2
-}