ath79: split Engenius EPG5000 DTS to common DTSI

[openwrt/staging/aparcar.git] / target / linux / ath79 / dts / qca9558_engenius_epg5000.dts

diff --git a/target/linux/ath79/dts/qca9558_engenius_epg5000.dts b/target/linux/ath79/dts/qca9558_engenius_epg5000.dts
index 35716152add615e4f65ba5ba9aee09c7c5b22996..37ad32f330e79087fb2046afb05cad7bc89b97a7 100644 (file)
--- a/target/linux/ath79/dts/qca9558_engenius_epg5000.dts
+++ b/target/linux/ath79/dts/qca9558_engenius_epg5000.dts
@@ -1,9 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qca955x.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "qca955x_senao_router-dual.dtsi"
 
 / {
        model = "EnGenius EPG5000";
@@ -47,110 +44,13 @@
                        gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
                };
        };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       linux,code = <KEY_WPS_BUTTON>;
-                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-       };
-};
-
-&eth0 {
-       status = "okay";
-
-       phy-handle = <&phy0>;
-       pll-data = <0xa6000000 0x00000101 0x00001616>;
-};
-
-&mdio0 {
-       status = "okay";
-
-       phy0: ethernet-phy@0 {
-               reg = <0>;
-
-               qca,ar8327-initvals = <
-                       0x04 0x87600000 /* PORT0 PAD MODE CTRL */
-                       0x7c 0x0000007e /* PORT0_STATUS */
-                       >;
-       };
-};
-
-&pcie0 {
-       status = "okay";
-
-       wifi@0,0 {
-               compatible = "pci168c,003c";
-               reg = <0x0000 0 0 0 0>;
-       };
 };
 
-&spi {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x030000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "u-boot-env";
-                               reg = <0x030000 0x010000>;
-                       };
-
-                       partition@40000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x040000 0xe50000>;
-                       };
-
-                       partition@790000 {
-                               label = "manufacture";
-                               reg = <0xe90000 0x100000>;
-                               read-only;
-                       };
-
-                       partition@ed0000 {
-                               label = "backup";
-                               reg = <0xf90000 0x010000>;
-                               read-only;
-                       };
-
-                       partition@fe0000 {
-                               label = "storage";
-                               reg = <0xfa0000 0x050000>;
-                               read-only;
-                       };
-
-                       partition@ff0000 {
-                               label = "art";
-                               reg = <0xff0000 0x010000>;
-                               read-only;
-                       };
-               };
-       };
+&phy0 {
+       qca,ar8327-initvals = <
+               0x04 0x87600000 /* PORT0 PAD MODE CTRL */
+               0x7c 0x0000007e /* PORT0_STATUS */
+       >;
 };
 
 &usb_phy1 {
@@ -162,7 +62,5 @@
 };
 
 &wmac {
-       status = "okay";
-
        qca,no-eeprom;
 };