target/linux/ath79/dts/qca9561_tplink_tl-wdr6500-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca956x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tplink,tl-wdr6500-v2", "qca,qca9561";
  10         model = "TP-Link TL-WDR6500 v2";
  11
  12         aliases {
  13                 led-boot = &led_system;
  14                 led-failsafe = &led_system;
  15                 led-running = &led_system;
  16                 led-upgrade = &led_system;
  17                 label-mac-device = &eth1;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 reset {
  24                         label = "Reset button";
  25                         linux,code = <KEY_RESTART>;
  26                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  27                 };
  28         };
  29
  30         leds {
  31                 compatible = "gpio-leds";
  32
  33                 lan4 {
  34                         label = "green:lan4";
  35                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 lan3 {
  39                         label = "green:lan3";
  40                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 lan2 {
  44                         label = "green:lan2";
  45                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 lan1 {
  49                         label = "green:lan1";
  50                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 wan {
  54                         label = "green:wan";
  55                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 led_system: system {
  59                         label = "white:system";
  60                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  61                         default-state = "on";
  62                 };
  63         };
  64 };
  65
  66 &spi {
  67         status = "okay";
  68
  69         flash@0 {
  70                 compatible = "jedec,spi-nor";
  71                 reg = <0>;
  72                 spi-max-frequency = <25000000>;
  73
  74                 partitions {
  75                         compatible = "fixed-partitions";
  76                         #address-cells = <1>;
  77                         #size-cells = <1>;
  78
  79                         partition@0 {
  80                                 label = "u-boot";
  81                                 reg = <0x000000 0x010000>;
  82                                 read-only;
  83
  84                                 nvmem-layout {
  85                                         compatible = "fixed-layout";
  86                                         #address-cells = <1>;
  87                                         #size-cells = <1>;
  88
  89                                         macaddr_uboot_0fc00: macaddr@0fc00 {
  90                                                 reg = <0x0fc00 0x6>;
  91                                         };
  92                                 };
  93                         };
  94
  95                         partition@10000 {
  96                                 compatible = "tplink,firmware";
  97                                 label = "firmware";
  98                                 reg = <0x010000 0x7e0000>;
  99                         };
 100
 101                         partition@7f0000 {
 102                                 label = "art";
 103                                 reg = <0x7f0000 0x010000>;
 104                                 read-only;
 105
 106                                 nvmem-layout {
 107                                         compatible = "fixed-layout";
 108                                         #address-cells = <1>;
 109                                         #size-cells = <1>;
 110
 111                                         calibration_ath9k: calibration@1000 {
 112                                                 reg = <0x1000 0x440>;
 113                                         };
 114
 115                                         calibration_ath10k: calibration@5000 {
 116                                                 reg = <0x5000 0x844>;
 117                                         };
 118                                 };
 119                         };
 120                 };
 121         };
 122 };
 123
 124 &uart {
 125         status = "okay";
 126 };
 127
 128 &pcie {
 129         status = "okay";
 130
 131         wifi@0,0 {
 132                 compatible = "qcom,ath10k";
 133                 reg = <0 0 0 0 0>;
 134
 135                 nvmem-cells = <&macaddr_uboot_0fc00>, <&calibration_ath10k>;
 136                 nvmem-cell-names = "mac-address", "calibration";
 137                 mac-address-increment = <(-2)>;
 138         };
 139 };
 140
 141 &mdio0 {
 142         status = "okay";
 143 };
 144
 145 &eth0 {
 146         status = "okay";
 147
 148         phy-handle = <&swphy4>;
 149
 150         nvmem-cells = <&macaddr_uboot_0fc00>;
 151         nvmem-cell-names = "mac-address";
 152         mac-address-increment = <1>;
 153 };
 154
 155 &eth1 {
 156         status = "okay";
 157
 158         nvmem-cells = <&macaddr_uboot_0fc00>;
 159         nvmem-cell-names = "mac-address";
 160 };
 161
 162 &wmac {
 163         status = "okay";
 164
 165         nvmem-cells = <&macaddr_uboot_0fc00>, <&calibration_ath9k>;
 166         nvmem-cell-names = "mac-address", "calibration";
 167         mac-address-increment = <(-1)>;
 168 };
 169
 170 &usb0 {
 171         status = "okay";
 172 };
 173
 174 &usb_phy0 {
 175         status = "okay";
 176 };