--- a/Documentation/serial/driver
+++ b/Documentation/serial/driver
-@@ -186,6 +186,17 @@
+@@ -186,6 +186,17 @@ hardware.
Locking: port_sem taken.
Interrupts: caller dependent.
bits. Update read_status_mask and ignore_status_mask to indicate
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
-@@ -47,6 +47,9 @@
+@@ -47,6 +47,9 @@ config RWSEM_GENERIC_SPINLOCK
config GENERIC_TIME
def_bool y
config RWSEM_XCHGADD_ALGORITHM
def_bool n
-@@ -70,6 +73,8 @@
+@@ -70,6 +73,8 @@ source "init/Kconfig"
menu "System Type and features"
config SUBARCH_AVR32B
bool
config MMU
-@@ -83,6 +88,7 @@
+@@ -83,6 +88,7 @@ config PLATFORM_AT32AP
select MMU
select PERFORMANCE_COUNTERS
select HAVE_GPIO_LIB
#
# CPU types
-@@ -117,6 +123,9 @@
+@@ -117,6 +123,9 @@ endchoice
if BOARD_ATSTK1000
source "arch/avr32/boards/atstk1000/Kconfig"
endif
choice
prompt "Boot loader type"
-@@ -142,6 +151,9 @@
+@@ -142,6 +151,9 @@ config PHYS_OFFSET
source "kernel/Kconfig.preempt"
config HAVE_ARCH_BOOTMEM_NODE
def_bool n
-@@ -180,6 +192,10 @@
+@@ -180,6 +192,10 @@ config NMI_DEBUGGING
be dumped to the console when a Non-Maskable Interrupt
happens.
# FPU emulation goes here
source "kernel/Kconfig.hz"
-@@ -196,6 +212,11 @@
+@@ -196,6 +212,11 @@ endmenu
menu "Power management options"
source "drivers/cpufreq/Kconfig"
--- a/arch/avr32/Makefile
+++ b/arch/avr32/Makefile
-@@ -32,6 +32,7 @@
+@@ -32,6 +32,7 @@ core-$(CONFIG_LOADER_U_BOOT) += arch/av
core-y += arch/avr32/kernel/
core-y += arch/avr32/mm/
drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
/* Initialized by bootloader-specific startup code. */
struct tag *bootloader_tags __initdata;
-@@ -37,11 +44,16 @@
+@@ -37,11 +44,16 @@ static struct eth_platform_data __initda
static struct spi_board_info spi0_board_info[] __initdata = {
{
.modalias = "mtd_dataflash",
/*
* The next two functions should go away as the boot loader is
* supposed to initialize the macb address registers with a valid
-@@ -124,6 +136,7 @@
+@@ -124,6 +136,7 @@ static struct platform_device ngw_gpio_l
}
};
static struct i2c_gpio_platform_data i2c_gpio_data = {
.sda_pin = GPIO_PIN_PA(6),
.scl_pin = GPIO_PIN_PA(7),
-@@ -139,6 +152,7 @@
+@@ -139,6 +152,7 @@ static struct platform_device i2c_gpio_d
.platform_data = &i2c_gpio_data,
},
};
static int __init atngw100_init(void)
{
-@@ -157,6 +171,7 @@
+@@ -157,6 +171,7 @@ static int __init atngw100_init(void)
set_hw_addr(at32_add_device_eth(1, ð_data[1]));
at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
at32_add_device_usba(0, NULL);
for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
-@@ -165,11 +180,15 @@
+@@ -165,11 +180,15 @@ static int __init atngw100_init(void)
}
platform_device_register(&ngw_gpio_leds);
}
--- a/arch/avr32/boards/atstk1000/Kconfig
+++ b/arch/avr32/boards/atstk1000/Kconfig
-@@ -18,6 +18,10 @@
+@@ -18,6 +18,10 @@ config BOARD_ATSTK1004
bool "ATSTK1004"
select CPU_AT32AP7002
endchoice
-@@ -102,4 +106,60 @@
+@@ -102,4 +106,60 @@ config BOARD_ATSTK1000_EXTDAC
depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
default y
endif # stk 1000
--- a/arch/avr32/boards/atstk1000/Makefile
+++ b/arch/avr32/boards/atstk1000/Makefile
-@@ -2,3 +2,4 @@
+@@ -2,3 +2,4 @@ obj-y += setup.o flash.o
obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o
obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o
obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o
struct eth_addr {
u8 addr[6];
-@@ -83,6 +157,19 @@
+@@ -83,6 +157,19 @@ static struct spi_board_info spi1_board_
} };
#endif
/*
* The next two functions should go away as the boot loader is
* supposed to initialize the macb address registers with a valid
-@@ -212,6 +299,12 @@
+@@ -212,6 +299,12 @@ static int __init atstk1002_init(void)
at32_add_system_devices();
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
at32_add_device_usart(1);
#else
-@@ -228,16 +321,30 @@
+@@ -228,16 +321,30 @@ static int __init atstk1002_init(void)
#ifdef CONFIG_BOARD_ATSTK100X_SPI1
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
static struct at73c213_board_info at73c213_data = {
.ssc_id = 0,
-@@ -59,6 +66,19 @@
+@@ -59,6 +66,19 @@ static struct spi_board_info spi1_board_
} };
#endif
#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
static void __init atstk1003_setup_extdac(void)
{
-@@ -147,12 +167,22 @@
+@@ -147,12 +167,22 @@ static int __init atstk1003_init(void)
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
static struct at73c213_board_info at73c213_data = {
.ssc_id = 0,
-@@ -130,14 +137,23 @@
+@@ -130,14 +137,23 @@ static int __init atstk1004_init(void)
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
-@@ -13,10 +13,10 @@
+@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
-@@ -37,17 +37,15 @@
+@@ -37,17 +37,15 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-@@ -61,11 +59,13 @@
+@@ -61,11 +59,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
-@@ -73,6 +73,14 @@
+@@ -73,6 +73,14 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
-@@ -101,10 +109,15 @@
+@@ -101,10 +109,15 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
-@@ -113,6 +126,7 @@
+@@ -113,6 +126,7 @@ CONFIG_CPU_AT32AP700X=y
CONFIG_CPU_AT32AP7000=y
# CONFIG_BOARD_ATSTK1000 is not set
CONFIG_BOARD_ATNGW100=y
CONFIG_LOADER_U_BOOT=y
#
-@@ -121,6 +135,7 @@
+@@ -121,6 +135,7 @@ CONFIG_LOADER_U_BOOT=y
# CONFIG_AP700X_32_BIT_SMC is not set
CONFIG_AP700X_16_BIT_SMC=y
# CONFIG_AP700X_8_BIT_SMC is not set
CONFIG_LOAD_ADDRESS=0x10000000
CONFIG_ENTRY_ADDRESS=0x90000000
CONFIG_PHYS_OFFSET=0x10000000
-@@ -146,16 +161,26 @@
+@@ -146,16 +161,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
#
# CPU Frequency scaling
-@@ -164,9 +189,9 @@
+@@ -164,9 +189,9 @@ CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-@@ -202,6 +227,7 @@
+@@ -202,6 +227,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-@@ -260,82 +286,33 @@
+@@ -260,82 +286,33 @@ CONFIG_IPV6_SIT=y
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
-@@ -343,54 +320,25 @@
+@@ -343,54 +320,25 @@ CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
-@@ -407,7 +355,6 @@
+@@ -407,7 +355,6 @@ CONFIG_LLC=m
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
-@@ -415,6 +362,7 @@
+@@ -415,6 +362,7 @@ CONFIG_NET_CLS_ROUTE=y
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-@@ -531,11 +479,18 @@
+@@ -531,11 +479,18 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
#
# SCSI device support
-@@ -568,11 +523,13 @@
+@@ -568,11 +523,13 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
-@@ -599,7 +556,6 @@
+@@ -599,7 +556,6 @@ CONFIG_PPPOE=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-@@ -633,6 +589,7 @@
+@@ -633,6 +589,7 @@ CONFIG_SLHC=m
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-@@ -640,8 +597,6 @@
+@@ -640,8 +597,6 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-@@ -659,6 +614,7 @@
+@@ -659,6 +614,7 @@ CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_GPIO=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-@@ -669,13 +625,12 @@
+@@ -669,13 +625,12 @@ CONFIG_I2C_GPIO=m
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
-@@ -702,9 +657,27 @@
+@@ -702,9 +657,27 @@ CONFIG_SPI_ATMEL=y
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
-@@ -757,10 +730,6 @@
+@@ -757,10 +730,6 @@ CONFIG_USB_SUPPORT=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
-@@ -787,21 +756,24 @@
+@@ -787,21 +756,24 @@ CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-@@ -844,19 +816,22 @@
+@@ -844,19 +816,22 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
-@@ -874,25 +849,23 @@
+@@ -874,25 +849,23 @@ CONFIG_RTC_DRV_AT32AP700X=y
#
# File systems
#
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-@@ -923,7 +896,7 @@
+@@ -923,7 +896,7 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
#
# Miscellaneous filesystems
-@@ -948,8 +921,10 @@
+@@ -948,8 +921,10 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
-@@ -1030,11 +1005,6 @@
+@@ -1030,11 +1005,6 @@ CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
-@@ -1053,6 +1023,7 @@
+@@ -1053,6 +1023,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
-@@ -1069,9 +1040,10 @@
+@@ -1069,9 +1040,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
-@@ -1084,7 +1056,9 @@
+@@ -1084,7 +1056,9 @@ CONFIG_FRAME_POINTER=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
-@@ -1103,6 +1077,9 @@
+@@ -1103,6 +1077,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
-@@ -1117,12 +1094,14 @@
+@@ -1117,12 +1094,14 @@ CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_HW=y
#
-@@ -1137,10 +1116,7 @@
+@@ -1137,10 +1116,7 @@ CONFIG_CRC7=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
-@@ -13,10 +13,10 @@
+@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
-@@ -36,15 +36,15 @@
+@@ -36,15 +36,15 @@ CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-@@ -58,11 +58,13 @@
+@@ -58,11 +58,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
-@@ -70,6 +72,14 @@
+@@ -70,6 +72,14 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
-@@ -98,10 +108,15 @@
+@@ -98,10 +108,15 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
-@@ -113,12 +128,16 @@
+@@ -113,12 +128,16 @@ CONFIG_BOARD_ATSTK1000=y
CONFIG_BOARD_ATSTK1002=y
# CONFIG_BOARD_ATSTK1003 is not set
# CONFIG_BOARD_ATSTK1004 is not set
CONFIG_LOADER_U_BOOT=y
#
-@@ -127,6 +146,7 @@
+@@ -127,6 +146,7 @@ CONFIG_LOADER_U_BOOT=y
# CONFIG_AP700X_32_BIT_SMC is not set
CONFIG_AP700X_16_BIT_SMC=y
# CONFIG_AP700X_8_BIT_SMC is not set
CONFIG_LOAD_ADDRESS=0x10000000
CONFIG_ENTRY_ADDRESS=0x90000000
CONFIG_PHYS_OFFSET=0x10000000
-@@ -152,16 +172,26 @@
+@@ -152,16 +172,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
#
# CPU Frequency scaling
-@@ -170,9 +200,9 @@
+@@ -170,9 +200,9 @@ CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-@@ -208,6 +238,7 @@
+@@ -208,6 +238,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-@@ -279,6 +310,7 @@
+@@ -279,6 +310,7 @@ CONFIG_LLC=m
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-@@ -395,13 +427,18 @@
+@@ -395,13 +427,18 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
#
# SCSI device support
-@@ -444,6 +481,7 @@
+@@ -444,6 +481,7 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_PATA_AT32=m
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
-@@ -469,11 +507,13 @@
+@@ -469,11 +507,13 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
-@@ -500,7 +540,6 @@
+@@ -500,7 +540,6 @@ CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-@@ -568,6 +607,7 @@
+@@ -568,6 +607,7 @@ CONFIG_MOUSE_GPIO=m
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-@@ -575,8 +615,6 @@
+@@ -575,8 +615,6 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-@@ -594,6 +632,7 @@
+@@ -594,6 +632,7 @@ CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_GPIO=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-@@ -604,13 +643,12 @@
+@@ -604,13 +643,12 @@ CONFIG_I2C_GPIO=m
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
-@@ -637,9 +675,27 @@
+@@ -637,9 +675,27 @@ CONFIG_SPI_ATMEL=y
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
-@@ -732,12 +788,18 @@
+@@ -732,12 +788,18 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
#
# Generic devices
#
# SPI devices
#
CONFIG_SND_AT73C213=m
-@@ -753,9 +815,14 @@
+@@ -753,9 +815,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
#
#
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
-@@ -765,10 +832,6 @@
+@@ -765,10 +832,6 @@ CONFIG_USB_SUPPORT=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
-@@ -796,27 +859,31 @@
+@@ -796,27 +859,31 @@ CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
CONFIG_LEDS_GPIO=m
#
-@@ -853,19 +920,22 @@
+@@ -853,19 +920,22 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
-@@ -883,13 +953,13 @@
+@@ -883,13 +953,13 @@ CONFIG_RTC_DRV_AT32AP700X=y
#
# File systems
#
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-@@ -897,12 +967,10 @@
+@@ -897,12 +967,10 @@ CONFIG_JBD=m
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-@@ -933,7 +1001,7 @@
+@@ -933,7 +1001,7 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
#
# Miscellaneous filesystems
-@@ -957,8 +1025,10 @@
+@@ -957,8 +1025,10 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
-@@ -1028,11 +1098,6 @@
+@@ -1028,11 +1098,6 @@ CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
-@@ -1051,6 +1116,7 @@
+@@ -1051,6 +1116,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
-@@ -1067,9 +1133,10 @@
+@@ -1067,9 +1133,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
-@@ -1082,7 +1149,9 @@
+@@ -1082,7 +1149,9 @@ CONFIG_FORCED_INLINING=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_HMAC=m
-@@ -1101,6 +1170,9 @@
+@@ -1101,6 +1170,9 @@ CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
-@@ -1115,12 +1187,14 @@
+@@ -1115,12 +1187,14 @@ CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_HW is not set
#
-@@ -1135,6 +1209,7 @@
+@@ -1135,6 +1209,7 @@ CONFIG_CRC7=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
-@@ -13,10 +13,10 @@
+@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
-@@ -39,17 +39,15 @@
+@@ -39,17 +39,15 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-@@ -63,11 +61,13 @@
+@@ -63,11 +61,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
-@@ -75,6 +75,14 @@
+@@ -75,6 +75,14 @@ CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
-@@ -103,10 +111,15 @@
+@@ -103,10 +111,15 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
-@@ -118,12 +131,16 @@
+@@ -118,12 +131,16 @@ CONFIG_BOARD_ATSTK1000=y
# CONFIG_BOARD_ATSTK1002 is not set
CONFIG_BOARD_ATSTK1003=y
# CONFIG_BOARD_ATSTK1004 is not set
CONFIG_LOADER_U_BOOT=y
#
-@@ -132,6 +149,7 @@
+@@ -132,6 +149,7 @@ CONFIG_LOADER_U_BOOT=y
# CONFIG_AP700X_32_BIT_SMC is not set
CONFIG_AP700X_16_BIT_SMC=y
# CONFIG_AP700X_8_BIT_SMC is not set
CONFIG_LOAD_ADDRESS=0x10000000
CONFIG_ENTRY_ADDRESS=0x90000000
CONFIG_PHYS_OFFSET=0x10000000
-@@ -157,16 +175,26 @@
+@@ -157,16 +175,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
#
# CPU Frequency scaling
-@@ -175,9 +203,9 @@
+@@ -175,9 +203,9 @@ CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-@@ -260,6 +288,7 @@
+@@ -260,6 +288,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-@@ -376,13 +405,18 @@
+@@ -376,13 +405,18 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
#
# SCSI device support
-@@ -427,6 +461,7 @@
+@@ -427,6 +461,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_PATA_AT32=m
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
-@@ -460,7 +495,6 @@
+@@ -460,7 +495,6 @@ CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-@@ -528,6 +562,7 @@
+@@ -528,6 +562,7 @@ CONFIG_MOUSE_GPIO=m
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-@@ -535,8 +570,6 @@
+@@ -535,8 +570,6 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-@@ -554,6 +587,7 @@
+@@ -554,6 +587,7 @@ CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_GPIO=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-@@ -564,13 +598,12 @@
+@@ -564,13 +598,12 @@ CONFIG_I2C_GPIO=m
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
-@@ -597,9 +630,27 @@
+@@ -597,9 +630,27 @@ CONFIG_SPI_ATMEL=y
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
-@@ -665,12 +716,18 @@
+@@ -665,12 +716,18 @@ CONFIG_SND_VERBOSE_PROCFS=y
#
# Generic devices
#
# SPI devices
#
CONFIG_SND_AT73C213=m
-@@ -686,9 +743,14 @@
+@@ -686,9 +743,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
#
#
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
-@@ -698,10 +760,6 @@
+@@ -698,10 +760,6 @@ CONFIG_USB_SUPPORT=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
-@@ -729,27 +787,31 @@
+@@ -729,27 +787,31 @@ CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
CONFIG_LEDS_GPIO=y
#
-@@ -786,19 +848,22 @@
+@@ -786,19 +848,22 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
-@@ -816,13 +881,13 @@
+@@ -816,13 +881,13 @@ CONFIG_UIO=m
#
# File systems
#
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-@@ -830,12 +895,10 @@
+@@ -830,12 +895,10 @@ CONFIG_JBD=m
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-@@ -866,7 +929,7 @@
+@@ -866,7 +929,7 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
#
# Miscellaneous filesystems
-@@ -891,8 +954,10 @@
+@@ -891,8 +954,10 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-@@ -943,11 +1008,6 @@
+@@ -943,11 +1008,6 @@ CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
-@@ -965,6 +1025,7 @@
+@@ -965,6 +1025,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
-@@ -981,9 +1042,10 @@
+@@ -981,9 +1042,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
-@@ -1009,6 +1071,7 @@
+@@ -1009,6 +1071,7 @@ CONFIG_CRC7=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
-@@ -13,10 +13,10 @@
+@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
-@@ -34,15 +34,15 @@
+@@ -34,15 +34,15 @@ CONFIG_LOCALVERSION=""
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
-@@ -54,24 +54,37 @@
+@@ -54,24 +54,37 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
-@@ -83,10 +96,14 @@
+@@ -83,10 +96,14 @@ CONFIG_BOARD_ATSTK1000=y
# CONFIG_BOARD_ATSTK1002 is not set
# CONFIG_BOARD_ATSTK1003 is not set
CONFIG_BOARD_ATSTK1004=y
CONFIG_LOADER_U_BOOT=y
#
-@@ -95,6 +112,7 @@
+@@ -95,6 +112,7 @@ CONFIG_LOADER_U_BOOT=y
# CONFIG_AP700X_32_BIT_SMC is not set
CONFIG_AP700X_16_BIT_SMC=y
# CONFIG_AP700X_8_BIT_SMC is not set
CONFIG_LOAD_ADDRESS=0x10000000
CONFIG_ENTRY_ADDRESS=0x90000000
CONFIG_PHYS_OFFSET=0x10000000
-@@ -120,34 +138,26 @@
+@@ -120,34 +138,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
#
# Bus options
-@@ -222,6 +232,7 @@
+@@ -222,6 +232,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-@@ -321,6 +332,7 @@
+@@ -321,6 +332,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
# CONFIG_MISC_DEVICES is not set
#
# SCSI device support
-@@ -358,6 +370,7 @@
+@@ -358,6 +370,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-@@ -365,8 +378,6 @@
+@@ -365,8 +378,6 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-@@ -389,9 +400,24 @@
+@@ -389,9 +400,24 @@ CONFIG_SPI_ATMEL=y
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
-@@ -471,10 +497,6 @@
+@@ -471,10 +497,6 @@ CONFIG_USB_SUPPORT=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
-@@ -499,7 +521,9 @@
+@@ -499,7 +521,9 @@ CONFIG_USB_ETH=y
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-@@ -519,15 +543,17 @@
+@@ -519,15 +543,17 @@ CONFIG_RTC_INTF_DEV=y
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
-@@ -545,9 +571,9 @@
+@@ -545,9 +571,9 @@ CONFIG_RTC_DRV_AT32AP700X=y
#
# File systems
#
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
-@@ -580,7 +606,6 @@
+@@ -580,7 +606,6 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
#
# Kernel hacking
-@@ -616,6 +641,7 @@
+@@ -616,6 +641,7 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+#endif /* __AVR32_DW_DMAC_H__ */
--- a/arch/avr32/kernel/Makefile
+++ b/arch/avr32/kernel/Makefile
-@@ -9,6 +9,7 @@
+@@ -9,6 +9,7 @@ obj-y += syscall_table.o syscall-stub
obj-y += setup.o traps.o semaphore.o ocd.o ptrace.o
obj-y += signal.o sys_avr32.o process.o time.o
obj-y += init_task.o switch_to.o cpu.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
--- a/arch/avr32/kernel/avr32_ksyms.c
+++ b/arch/avr32/kernel/avr32_ksyms.c
-@@ -29,7 +29,9 @@
+@@ -29,7 +29,9 @@ EXPORT_SYMBOL(__avr32_asr64);
*/
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcpy);
/*
* Userspace access stuff.
-@@ -41,6 +43,8 @@
+@@ -41,6 +43,8 @@ EXPORT_SYMBOL(strncpy_from_user);
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(clear_user);
EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(find_dma_controller);
--- a/arch/avr32/kernel/entry-avr32b.S
+++ b/arch/avr32/kernel/entry-avr32b.S
-@@ -74,50 +74,41 @@
+@@ -74,50 +74,41 @@ exception_vectors:
.align 2
bral do_dtlb_modified
/* Second level lookup */
ld.w r2, r3[r1 << 2]
-@@ -148,16 +139,55 @@
+@@ -148,16 +139,55 @@ pgtbl_lookup:
tlbmiss_restore
rete
system_call:
#ifdef CONFIG_PREEMPT
mask_interrupts
-@@ -266,18 +296,6 @@
+@@ -266,18 +296,6 @@ syscall_exit_work:
brcc syscall_exit_cont
rjmp enter_monitor_mode
/* This function expects to find offending PC in SYSREG_RAR_EX */
.type save_full_context_ex, @function
.align 2
-@@ -741,26 +759,6 @@
+@@ -741,26 +759,6 @@ irq_level\level:
.section .irq.text,"ax",@progbits
/*
* This file handles the architecture-dependent parts of process handling..
*/
-@@ -54,6 +54,8 @@
+@@ -54,6 +54,8 @@ void machine_halt(void)
void machine_power_off(void)
{
void machine_restart(char *cmd)
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
-@@ -274,6 +274,8 @@
+@@ -274,6 +274,8 @@ static int __init early_parse_fbmem(char
printk(KERN_WARNING
"Failed to allocate framebuffer memory\n");
fbmem_size = 0;
--- a/arch/avr32/kernel/signal.c
+++ b/arch/avr32/kernel/signal.c
-@@ -93,6 +93,9 @@
+@@ -93,6 +93,9 @@ asmlinkage int sys_rt_sigreturn(struct p
if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
-device_initcall(init_timer_sysfs);
--- a/arch/avr32/kernel/vmlinux.lds.S
+++ b/arch/avr32/kernel/vmlinux.lds.S
-@@ -68,14 +68,6 @@
+@@ -68,14 +68,6 @@ SECTIONS
_evba = .;
_text = .;
*(.ex.text)
*(.irq.text)
KPROBES_TEXT
TEXT_TEXT
-@@ -107,6 +99,10 @@
+@@ -107,6 +99,10 @@ SECTIONS
*/
*(.data.init_task)
*(.data.cacheline_aligned)
--- a/arch/avr32/lib/io-readsb.S
+++ b/arch/avr32/lib/io-readsb.S
-@@ -41,7 +41,7 @@
+@@ -41,7 +41,7 @@ __raw_readsb:
2: sub r10, -4
reteq r12
brne 3b
--- a/arch/avr32/mach-at32ap/Kconfig
+++ b/arch/avr32/mach-at32ap/Kconfig
-@@ -26,6 +26,13 @@
+@@ -26,6 +26,13 @@ config AP700X_8_BIT_SMC
endchoice
#include <video/atmel_lcdc.h>
-@@ -91,25 +94,18 @@
+@@ -91,25 +94,18 @@ static struct clk devname##_##_name = {
static DEFINE_SPINLOCK(pm_lock);
div = PM_BFEXT(PLLDIV, control) + 1;
mul = PM_BFEXT(PLLMUL, control) + 1;
-@@ -120,6 +116,71 @@
+@@ -120,6 +116,71 @@ static unsigned long pll_get_rate(struct
return rate;
}
static unsigned long pll0_get_rate(struct clk *clk)
{
u32 control;
-@@ -129,6 +190,41 @@
+@@ -129,6 +190,41 @@ static unsigned long pll0_get_rate(struc
return pll_get_rate(clk, control);
}
static unsigned long pll1_get_rate(struct clk *clk)
{
u32 control;
-@@ -138,6 +234,49 @@
+@@ -138,6 +234,49 @@ static unsigned long pll1_get_rate(struc
return pll_get_rate(clk, control);
}
/*
* The AT32AP7000 has five primary clock sources: One 32kHz
* oscillator, two crystal oscillators and two PLLs.
-@@ -166,7 +305,10 @@
+@@ -166,7 +305,10 @@ static struct clk pll0 = {
};
static struct clk pll1 = {
.name = "pll1",
.parent = &osc0,
};
-@@ -534,6 +676,14 @@
+@@ -534,6 +676,14 @@ static struct clk hramc_clk = {
.users = 1,
.index = 3,
};
static struct resource smc0_resource[] = {
PBMEM(0xfff03400),
-@@ -605,19 +755,32 @@
+@@ -605,19 +755,32 @@ static inline void set_ebi_sfr_bits(u32
}
/* --------------------------------------------------------------------
/* --------------------------------------------------------------------
* PIO
-@@ -669,7 +832,8 @@
+@@ -669,7 +832,8 @@ void __init at32_add_system_devices(void
platform_device_register(&pdc_device);
platform_device_register(&dmaca0_device);
platform_device_register(&pio0_device);
platform_device_register(&pio1_device);
-@@ -679,6 +843,81 @@
+@@ -679,6 +843,81 @@ void __init at32_add_system_devices(void
}
/* --------------------------------------------------------------------
* USART
* -------------------------------------------------------------------- */
-@@ -951,7 +1190,8 @@
+@@ -951,7 +1190,8 @@ at32_add_device_spi(unsigned int id, str
switch (id) {
case 0:
pdev = &atmel_spi0_device;
select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
at32_spi_setup_slaves(0, b, n, spi0_pins);
-@@ -959,7 +1199,8 @@
+@@ -959,7 +1199,8 @@ at32_add_device_spi(unsigned int id, str
case 1:
pdev = &atmel_spi1_device;
select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
at32_spi_setup_slaves(1, b, n, spi1_pins);
-@@ -989,7 +1230,9 @@
+@@ -989,7 +1230,9 @@ static struct clk atmel_twi0_pclk = {
.index = 2,
};
{
struct platform_device *pdev;
-@@ -1009,6 +1252,9 @@
+@@ -1009,6 +1252,9 @@ struct platform_device *__init at32_add_
atmel_twi0_pclk.dev = &pdev->dev;
platform_device_add(pdev);
return pdev;
-@@ -1032,7 +1278,8 @@
+@@ -1032,7 +1278,8 @@ static struct clk atmel_mci0_pclk = {
.index = 9,
};
{
struct platform_device *pdev;
-@@ -1041,11 +1288,15 @@
+@@ -1041,11 +1288,15 @@ struct platform_device *__init at32_add_
pdev = platform_device_alloc("atmel_mci", id);
if (!pdev)
select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
-@@ -1054,12 +1305,19 @@
+@@ -1054,12 +1305,19 @@ struct platform_device *__init at32_add_
select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
platform_device_put(pdev);
return NULL;
}
-@@ -1097,7 +1355,8 @@
+@@ -1097,7 +1355,8 @@ static struct clk atmel_lcdfb0_pixclk =
struct platform_device *__init
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
{
struct platform_device *pdev;
struct atmel_lcdfb_info *info;
-@@ -1124,37 +1383,77 @@
+@@ -1124,37 +1383,77 @@ at32_add_device_lcdc(unsigned int id, st
switch (id) {
case 0:
pdev = &atmel_lcdfb0_device;
clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
-@@ -1351,9 +1650,39 @@
+@@ -1351,9 +1650,39 @@ static struct clk usba0_hclk = {
.index = 6,
};
struct platform_device *pdev;
if (id != 0)
-@@ -1367,13 +1696,20 @@
+@@ -1367,13 +1696,20 @@ at32_add_device_usba(unsigned int id, st
ARRAY_SIZE(usba0_resource)))
goto out_free_pdev;
usba0_pclk.dev = &pdev->dev;
usba0_hclk.dev = &pdev->dev;
-@@ -1526,6 +1862,58 @@
+@@ -1526,6 +1862,58 @@ fail:
#endif
/* --------------------------------------------------------------------
* AC97C
* -------------------------------------------------------------------- */
static struct resource atmel_ac97c0_resource[] __initdata = {
-@@ -1540,9 +1928,11 @@
+@@ -1540,9 +1928,11 @@ static struct clk atmel_ac97c0_pclk = {
.index = 10,
};
if (id != 0)
return NULL;
-@@ -1553,19 +1943,37 @@
+@@ -1553,19 +1943,37 @@ struct platform_device *__init at32_add_
if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
ARRAY_SIZE(atmel_ac97c0_resource)))
platform_device_put(pdev);
return NULL;
}
-@@ -1683,6 +2091,7 @@
+@@ -1683,6 +2091,7 @@ struct clk *at32_clock_list[] = {
&hmatrix_clk,
&ebi_clk,
&hramc_clk,
&smc0_pclk,
&smc0_mck,
&pdc_hclk,
-@@ -1694,7 +2103,10 @@
+@@ -1694,7 +2103,10 @@ struct clk *at32_clock_list[] = {
&pio2_mck,
&pio3_mck,
&pio4_mck,
&atmel_usart0_usart,
&atmel_usart1_usart,
&atmel_usart2_usart,
-@@ -1730,16 +2142,7 @@
+@@ -1730,16 +2142,7 @@ struct clk *at32_clock_list[] = {
};
unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
{
u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
int i;
-@@ -1794,4 +2197,36 @@
+@@ -1794,4 +2197,36 @@ void __init at32_clock_init(void)
pm_writel(HSB_MASK, hsb_mask);
pm_writel(PBA_MASK, pba_mask);
pm_writel(PBB_MASK, pbb_mask);
+core_initcall(sram_init);
--- a/arch/avr32/mach-at32ap/cpufreq.c
+++ b/arch/avr32/mach-at32ap/cpufreq.c
-@@ -108,5 +108,4 @@
+@@ -108,5 +108,4 @@ static int __init at32_cpufreq_init(void
{
return cpufreq_register_driver(&at32_driver);
}
+late_initcall(gpio_dev_init);
--- a/arch/avr32/mach-at32ap/hsmc.c
+++ b/arch/avr32/mach-at32ap/hsmc.c
-@@ -278,4 +278,4 @@
+@@ -278,4 +278,4 @@ static int __init hsmc_init(void)
{
return platform_driver_register(&hsmc_driver);
}
};
extern struct platform_device at32_intc0_device;
-@@ -137,6 +142,74 @@
+@@ -137,6 +142,74 @@ fail:
panic("Interrupt controller initialization failed!\n");
}
+arch_initcall(pdc_init);
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
-@@ -157,6 +157,82 @@
+@@ -157,6 +157,82 @@ fail:
dump_stack();
}
/*--------------------------------------------------------------------------*/
/* GPIO API */
-@@ -318,6 +394,8 @@
+@@ -318,6 +394,8 @@ static void pio_bank_show(struct seq_fil
const char *label;
label = gpiochip_is_requested(chip, i);
void show_mem(void)
{
int total = 0, reserved = 0, cached = 0;
-@@ -109,19 +110,9 @@
+@@ -109,19 +110,9 @@ void __init paging_init(void)
zero_page = alloc_bootmem_low_pages_node(NODE_DATA(0),
PAGE_SIZE);
cpu_sync_pipeline();
tlbehi = sysreg_read(TLBEHI);
-@@ -33,15 +33,17 @@
+@@ -33,15 +33,17 @@ void show_dtlb_entry(unsigned int index)
printk("%2u: %c %c %02x %05x %05x %o %o %c %c %c %c\n",
index,
sysreg_write(MMUCR, mmucr_save);
sysreg_write(TLBEHI, tlbehi_save);
-@@ -54,29 +56,33 @@
+@@ -54,29 +56,33 @@ void dump_dtlb(void)
unsigned int i;
printk("ID V G ASID VPN PFN AP SZ C B W D\n");
rp = 32 - fls(tlbar);
if (rp == 32) {
-@@ -84,30 +90,14 @@
+@@ -84,30 +90,14 @@ static inline void set_replacement_point
sysreg_write(TLBARLO, -1L);
}
}
void update_mmu_cache(struct vm_area_struct *vma,
-@@ -120,39 +110,40 @@
+@@ -120,39 +110,40 @@ void update_mmu_cache(struct vm_area_str
return;
local_irq_save(flags);
}
}
-@@ -190,17 +181,22 @@
+@@ -190,17 +181,22 @@ void flush_tlb_range(struct vm_area_stru
local_irq_save(flags);
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
if (mm != current->mm) {
saved_asid = get_asid();
set_asid(asid);
-@@ -218,33 +214,34 @@
+@@ -218,33 +214,34 @@ void flush_tlb_range(struct vm_area_stru
}
/*
}
void flush_tlb_mm(struct mm_struct *mm)
-@@ -280,7 +277,7 @@
+@@ -280,7 +277,7 @@ static void *tlb_start(struct seq_file *
{
static unsigned long tlb_index;
return NULL;
tlb_index = 0;
-@@ -291,7 +288,7 @@
+@@ -291,7 +288,7 @@ static void *tlb_next(struct seq_file *t
{
unsigned long *index = v;
return NULL;
++*pos;
-@@ -313,16 +310,16 @@
+@@ -313,16 +310,16 @@ static int tlb_show(struct seq_file *tlb
if (*index == 0)
seq_puts(tlb, "ID V G ASID VPN PFN AP SZ C B W D\n");
cpu_sync_pipeline();
tlbehi = sysreg_read(TLBEHI);
-@@ -334,16 +331,18 @@
+@@ -334,16 +331,18 @@ static int tlb_show(struct seq_file *tlb
local_irq_restore(flags);
seq_printf(tlb, "%2lu: %c %c %02x %05x %05x %o %o %c %c %c %c\n",
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
-@@ -706,7 +706,7 @@
+@@ -706,7 +706,7 @@ config NVRAM
config RTC
tristate "Enhanced Real Time Clock Support"
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
-@@ -776,7 +776,7 @@
+@@ -776,7 +776,7 @@ config SGI_IP27_RTC
config GEN_RTC
tristate "Generic /dev/rtc emulation"
major number 10 and minor number 135 using mknod ("man mknod"), you
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
-@@ -1033,7 +1033,8 @@
+@@ -1033,7 +1033,8 @@ DECLARE_TASKLET_DISABLED(keyboard_taskle
#if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\
defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\
defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
+arch_initcall(tcb_clksrc_init);
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -88,6 +88,14 @@
+@@ -88,6 +88,14 @@ config I2C_AT91
to support combined I2C messages. Use the i2c-gpio driver
unless your system can cope with those limitations.
depends on SOC_AU1550 || SOC_AU1200
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
-@@ -52,6 +52,7 @@
+@@ -52,6 +52,7 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
+#endif /* __ATMELTWI_H__ */
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
-@@ -88,6 +88,17 @@
+@@ -88,6 +88,17 @@ config SERIO_RPCKBD
To compile this driver as a module, choose M here: the
module will be called rpckbd.
depends on ARM_AMBA
--- a/drivers/input/serio/Makefile
+++ b/drivers/input/serio/Makefile
-@@ -12,6 +12,7 @@
+@@ -12,6 +12,7 @@ obj-$(CONFIG_SERIO_CT82C710) += ct82c710
obj-$(CONFIG_SERIO_RPCKBD) += rpckbd.o
obj-$(CONFIG_SERIO_SA1111) += sa1111ps2.o
obj-$(CONFIG_SERIO_AMBAKMI) += ambakmi.o
+#endif /* _AT32PSIF_H */
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
-@@ -22,6 +22,39 @@
+@@ -22,6 +22,39 @@ config ATMEL_PWM
purposes including software controlled power-efficent backlights
on LCD displays, motor control, and waveform generation.
depends on X86 && PCI && INPUT && EXPERIMENTAL
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
-@@ -10,6 +10,7 @@
+@@ -10,6 +10,7 @@ obj-$(CONFIG_ACER_WMI) += acer-wmi.o
obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o
obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
+arch_initcall(tc_init);
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
-@@ -91,6 +91,16 @@
+@@ -91,6 +91,16 @@ config MMC_AT91
If unsure, say N.
depends on ARCH_IMX
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
-@@ -15,6 +15,7 @@
+@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_OMAP) += omap.o
obj-$(CONFIG_MMC_AT91) += at91_mci.o
+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
-@@ -272,12 +272,54 @@
+@@ -272,12 +272,54 @@ config MTD_NAND_CS553X
If you say "m", the module will be called "cs553x_nand.ko".
tristate "Support for NAND Flash on CM-X270 modules"
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
-@@ -24,7 +24,7 @@
+@@ -24,7 +24,7 @@ obj-$(CONFIG_MTD_NAND_TS7250) += ts7250
obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o
obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
+#endif
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
-@@ -803,3 +803,4 @@
+@@ -803,3 +803,4 @@ module_exit(bf5xx_nand_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR(DRV_AUTHOR);
MODULE_DESCRIPTION(DRV_DESC);
+MODULE_ALIAS("platform:" DRV_NAME);
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
-@@ -317,3 +317,5 @@
+@@ -317,3 +317,5 @@ module_exit(ndfc_nand_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
MODULE_DESCRIPTION("Platform driver for NDFC");
+MODULE_ALIAS("platform:ndfc-nand");
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
-@@ -169,3 +169,4 @@
+@@ -169,3 +169,4 @@ module_exit(orion_nand_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Tzachi Perelstein");
MODULE_DESCRIPTION("NAND glue for Orion platforms");
+MODULE_ALIAS("platform:orion_nand");
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
-@@ -161,3 +161,4 @@
+@@ -161,3 +161,4 @@ module_exit(plat_nand_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Vitaly Wool");
MODULE_DESCRIPTION("Simple generic NAND driver");
+MODULE_ALIAS("platform:gen_nand");
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
-@@ -927,3 +927,6 @@
+@@ -927,3 +927,6 @@ module_exit(s3c2410_nand_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_DESCRIPTION("S3C24XX MTD NAND driver");
+MODULE_ALIAS("platform:s3c2440-nand");
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
-@@ -1277,8 +1277,45 @@
+@@ -1277,8 +1277,45 @@ static int __exit macb_remove(struct pla
return 0;
}
},
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
-@@ -36,7 +36,7 @@
+@@ -36,7 +36,7 @@ if PARPORT
config PARPORT_PC
tristate "PC-style hardware"
depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \
IBM PC compatible computers and some Alphas have PC-style
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
-@@ -277,6 +277,13 @@
+@@ -277,6 +277,13 @@ config ELECTRA_CF
Say Y here to support the CompactFlash controller on the
PA Semi Electra eval board.
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
-@@ -38,6 +38,7 @@
+@@ -38,6 +38,7 @@ obj-$(CONFIG_PCMCIA_VRC4173) += vrc417
obj-$(CONFIG_OMAP_CF) += omap_cf.o
obj-$(CONFIG_AT91_CF) += at91_cf.o
obj-$(CONFIG_ELECTRA_CF) += electra_cf.o
+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
--- a/drivers/rtc/rtc-at32ap700x.c
+++ b/drivers/rtc/rtc-at32ap700x.c
-@@ -262,6 +262,7 @@
+@@ -262,6 +262,7 @@ static int __init at32_rtc_probe(struct
}
platform_set_drvdata(pdev, rtc);
dev_info(&pdev->dev, "Atmel RTC for AT32AP700x at %08lx irq %ld\n",
(unsigned long)rtc->regs, rtc->irq);
-@@ -281,6 +282,8 @@
+@@ -281,6 +282,8 @@ static int __exit at32_rtc_remove(struct
{
struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev);
rtc_device_unregister(rtc->rtc);
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
-@@ -957,6 +957,20 @@
+@@ -957,6 +957,20 @@ static void atmel_shutdown(struct uart_p
}
/*
* Power / Clock management.
*/
static void atmel_serial_pm(struct uart_port *port, unsigned int state,
-@@ -1190,6 +1204,7 @@
+@@ -1190,6 +1204,7 @@ static struct uart_ops atmel_pops = {
.break_ctl = atmel_break_ctl,
.startup = atmel_startup,
.shutdown = atmel_shutdown,
.set_termios = atmel_set_termios,
.type = atmel_type,
.release_port = atmel_release_port,
-@@ -1440,6 +1455,15 @@
+@@ -1440,6 +1455,15 @@ static struct uart_driver atmel_uart = {
};
#ifdef CONFIG_PM
static int atmel_serial_suspend(struct platform_device *pdev,
pm_message_t state)
{
-@@ -1447,7 +1471,7 @@
+@@ -1447,7 +1471,7 @@ static int atmel_serial_suspend(struct p
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (device_may_wakeup(&pdev->dev)
uart_suspend_port(&atmel_uart, port);
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
-@@ -552,6 +552,8 @@
+@@ -552,6 +552,8 @@ static void uart_flush_buffer(struct tty
spin_lock_irqsave(&port->lock, flags);
uart_circ_clear(&state->info->xmit);
}
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
-@@ -51,9 +51,7 @@
+@@ -51,9 +51,7 @@ struct atmel_spi {
u8 stopping;
struct list_head queue;
struct spi_transfer *current_transfer;
void *buffer;
dma_addr_t buffer_dma;
-@@ -133,48 +131,6 @@
+@@ -133,48 +131,6 @@ static void cs_deactivate(struct atmel_s
gpio_set_value(gpio, !active);
}
/*
* Submit next transfer for DMA.
* lock is held, spi irq is blocked
-@@ -184,78 +140,53 @@
+@@ -184,78 +140,53 @@ static void atmel_spi_next_xfer(struct s
{
struct atmel_spi *as = spi_master_get_devdata(master);
struct spi_transfer *xfer;
* transfer because we need to handle some difficult timing
* issues otherwise. If we wait for ENDTX in one transfer and
* then starts waiting for ENDRX in the next, it's difficult
-@@ -265,7 +196,17 @@
+@@ -265,7 +196,17 @@ static void atmel_spi_next_xfer(struct s
*
* It should be doable, though. Just not now...
*/
spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
}
-@@ -363,7 +304,6 @@
+@@ -363,7 +304,6 @@ atmel_spi_msg_done(struct spi_master *ma
spin_lock(&as->lock);
as->current_transfer = NULL;
/* continue if needed */
if (list_empty(&as->queue) || as->stopping)
-@@ -447,7 +387,7 @@
+@@ -447,7 +387,7 @@ atmel_spi_interrupt(int irq, void *dev_i
spi_writel(as, IDR, pending);
msg->actual_length += xfer->len;
if (!msg->is_dma_mapped)
-@@ -457,7 +397,7 @@
+@@ -457,7 +397,7 @@ atmel_spi_interrupt(int irq, void *dev_i
if (xfer->delay_usecs)
udelay(xfer->delay_usecs);
xfer->cs_change);
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
-@@ -118,10 +118,10 @@
+@@ -118,10 +118,10 @@ config USB_AMD5536UDC
config USB_GADGET_ATMEL_USBA
boolean "Atmel USBA"
select USB_GADGET_DUALSPEED
#ifdef CONFIG_USB_GADGET_DEBUG_FS
#include <linux/debugfs.h>
-@@ -324,53 +326,28 @@
+@@ -324,53 +326,28 @@ static int vbus_is_present(struct usba_u
return 1;
}
static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
{
unsigned int transaction_len;
-@@ -387,7 +364,7 @@
+@@ -387,7 +364,7 @@ static void next_fifo_transaction(struct
ep->ep.name, req, transaction_len,
req->last_transaction ? ", done" : "");
usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
req->req.actual += transaction_len;
}
-@@ -476,7 +453,7 @@
+@@ -476,7 +453,7 @@ static void receive_data(struct usba_ep
bytecount = req->req.length - req->req.actual;
}
ep->fifo, bytecount);
req->req.actual += bytecount;
-@@ -1029,33 +1006,6 @@
+@@ -1029,33 +1006,6 @@ static const struct usb_gadget_ops usba_
.set_selfpowered = usba_udc_set_selfpowered,
};
static struct usb_endpoint_descriptor usba_ep0_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
-@@ -1074,7 +1024,6 @@
+@@ -1074,7 +1024,6 @@ static void nop_release(struct device *d
static struct usba_udc the_udc = {
.gadget = {
.ops = &usba_udc_ops,
.ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list),
.is_dualspeed = 1,
.name = "atmel_usba_udc",
-@@ -1231,7 +1180,7 @@
+@@ -1231,7 +1180,7 @@ static int do_test_mode(struct usba_udc
} else {
usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
usba_writel(udc, TST, USBA_TST_PKT_MODE);
sizeof(test_packet_buffer));
usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
dev_info(dev, "Entering Test_Packet mode...\n");
-@@ -1530,13 +1479,13 @@
+@@ -1530,13 +1479,13 @@ restart:
DBG(DBG_HW, "Packet length: %u\n", pkt_len);
if (pkt_len != sizeof(crq)) {
pr_warning("udc: Invalid packet length %u "
/* Free up one bank in the FIFO so that we can
* generate or receive a reply right away. */
-@@ -1688,6 +1637,7 @@
+@@ -1688,6 +1637,7 @@ static irqreturn_t usba_udc_irq(int irq,
DBG(DBG_INT, "irq, status=%#08x\n", status);
if (status & USBA_DET_SUSPEND) {
usba_writel(udc, INT_CLR, USBA_DET_SUSPEND);
DBG(DBG_BUS, "Suspend detected\n");
if (udc->gadget.speed != USB_SPEED_UNKNOWN
-@@ -1699,6 +1649,7 @@
+@@ -1699,6 +1649,7 @@ static irqreturn_t usba_udc_irq(int irq,
}
if (status & USBA_WAKE_UP) {
usba_writel(udc, INT_CLR, USBA_WAKE_UP);
DBG(DBG_BUS, "Wake Up CPU detected\n");
}
-@@ -1792,12 +1743,14 @@
+@@ -1792,12 +1743,14 @@ static irqreturn_t usba_vbus_irq(int irq
vbus = gpio_get_value(udc->vbus_pin);
if (vbus != udc->vbus_prev) {
if (vbus) {
spin_unlock(&udc->lock);
udc->driver->disconnect(&udc->gadget);
spin_lock(&udc->lock);
-@@ -1850,7 +1803,8 @@
+@@ -1850,7 +1803,8 @@ int usb_gadget_register_driver(struct us
/* If Vbus is present, enable the controller and wait for reset */
spin_lock_irqsave(&udc->lock, flags);
if (vbus_is_present(udc) && udc->vbus_prev == 0) {
usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
}
spin_unlock_irqrestore(&udc->lock, flags);
-@@ -1883,7 +1837,8 @@
+@@ -1883,7 +1837,8 @@ int usb_gadget_unregister_driver(struct
spin_unlock_irqrestore(&udc->lock, flags);
/* This will also disable the DP pullup */
driver->unbind(&udc->gadget);
udc->gadget.dev.driver = NULL;
-@@ -1908,7 +1863,7 @@
+@@ -1908,7 +1863,7 @@ static int __init usba_udc_probe(struct
regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
return -ENXIO;
irq = platform_get_irq(pdev, 0);
-@@ -1953,19 +1908,48 @@
+@@ -1953,19 +1908,48 @@ static int __init usba_udc_probe(struct
/* Make sure we start from a clean slate */
clk_enable(pclk);
list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
}
-@@ -1984,7 +1968,7 @@
+@@ -1984,7 +1968,7 @@ static int __init usba_udc_probe(struct
goto err_device_add;
}
if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
udc->vbus_pin = pdata->vbus_pin;
-@@ -2004,7 +1988,7 @@
+@@ -2004,7 +1988,7 @@ static int __init usba_udc_probe(struct
}
usba_init_debugfs(udc);
usba_ep_init_debugfs(udc, &usba_ep[i]);
return 0;
-@@ -2012,6 +1996,8 @@
+@@ -2012,6 +1996,8 @@ static int __init usba_udc_probe(struct
err_device_add:
free_irq(irq, udc);
err_request_irq:
iounmap(udc->fifo);
err_map_fifo:
iounmap(udc->regs);
-@@ -2029,10 +2015,11 @@
+@@ -2029,10 +2015,11 @@ static int __exit usba_udc_remove(struct
{
struct usba_udc *udc;
int i;
usba_ep_cleanup_debugfs(&usba_ep[i]);
usba_cleanup_debugfs(udc);
-@@ -2040,6 +2027,7 @@
+@@ -2040,6 +2027,7 @@ static int __exit usba_udc_remove(struct
gpio_free(udc->vbus_pin);
free_irq(udc->irq, udc);
static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
struct fb_var_screeninfo *var)
-@@ -176,7 +178,7 @@
+@@ -176,7 +178,7 @@ static struct fb_fix_screeninfo atmel_lc
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_TRUECOLOR,
.xpanstep = 0,
.ywrapstep = 0,
.accel = FB_ACCEL_NONE,
};
-@@ -250,6 +252,8 @@
+@@ -250,6 +252,8 @@ static int atmel_lcdfb_alloc_video_memor
return -ENOMEM;
}
return 0;
}
-@@ -634,7 +638,6 @@
+@@ -634,7 +638,6 @@ static int __init atmel_lcdfb_init_fbinf
struct fb_info *info = sinfo->info;
int ret = 0;
info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
dev_info(info->device,
-@@ -764,6 +767,11 @@
+@@ -764,6 +767,11 @@ static int __init atmel_lcdfb_probe(stru
info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
if (!info->screen_base)
goto release_intmem;
ret = atmel_lcdfb_alloc_video_memory(sinfo);
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
-@@ -385,8 +385,6 @@
+@@ -385,8 +385,6 @@ __writeback_single_inode(struct inode *i
* WB_SYNC_HOLD is a hack for sys_sync(): reattach the inode to sb->s_dirty so
* that it can be located for waiting on in __writeback_single_inode().
*
* If `bdi' is non-zero then we're being asked to writeback a specific queue.
* This function assumes that the blockdev superblock's inodes are backed by
* a variety of queues, so all inodes are searched. For other superblocks,
-@@ -402,11 +400,12 @@
+@@ -402,11 +400,12 @@ __writeback_single_inode(struct inode *i
* on the writer throttling path, and we get decent balancing between many
* throttled threads: we don't want them all piling up on inode_sync_wait.
*/
if (!wbc->for_kupdate || list_empty(&sb->s_io))
queue_io(sb, wbc->older_than_this);
-@@ -485,8 +484,16 @@
+@@ -485,8 +484,16 @@ sync_sb_inodes(struct super_block *sb, s
if (!list_empty(&sb->s_more_io))
wbc->more_io = 1;
}
/*
* Start writeback of dirty pagecache data against all unlocked inodes.
-@@ -526,11 +533,8 @@
+@@ -526,11 +533,8 @@ restart:
* be unmounted by the time it is released.
*/
if (down_read_trylock(&sb->s_umount)) {
up_read(&sb->s_umount);
}
spin_lock(&sb_lock);
-@@ -568,9 +572,7 @@
+@@ -568,9 +572,7 @@ void sync_inodes_sb(struct super_block *
(inodes_stat.nr_inodes - inodes_stat.nr_unused) +
nr_dirty + nr_unstable;
wbc.nr_to_write += wbc.nr_to_write / 2; /* Bit more for luck */
/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
void at32_add_system_devices(void);
-@@ -36,11 +42,10 @@
+@@ -36,11 +42,10 @@ at32_add_device_spi(unsigned int id, str
struct atmel_lcdfb_info;
struct platform_device *
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
struct platform_device *
at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
-@@ -68,9 +73,27 @@
+@@ -68,9 +73,27 @@ struct platform_device *at32_add_device_
struct platform_device *
at32_add_device_ssc(unsigned int id, unsigned int flags);
struct platform_device *at32_add_device_abdac(unsigned int id);
struct cf_platform_data {
-@@ -84,4 +107,20 @@
+@@ -84,4 +107,20 @@ struct platform_device *
at32_add_device_cf(unsigned int id, unsigned int extint,
struct cf_platform_data *data);
+#endif /* __ASM_AVR32_ARCH_PM_H */
--- a/include/asm-avr32/arch-at32ap/portmux.h
+++ b/include/asm-avr32/arch-at32ap/portmux.h
-@@ -26,4 +26,16 @@
+@@ -26,4 +26,16 @@ void at32_select_periph(unsigned int pin
void at32_select_gpio(unsigned int pin, unsigned long flags);
void at32_reserve_pin(unsigned int pin);
}
#define __pte_free_tlb(tlb,pte) \
-@@ -75,6 +89,10 @@
+@@ -75,6 +89,10 @@ do { \
tlb_remove_page((tlb), pte); \
} while (0)
#endif /* __ASM_AVR32_PGALLOC_H */
--- a/include/asm-avr32/pgtable.h
+++ b/include/asm-avr32/pgtable.h
-@@ -129,13 +129,6 @@
+@@ -129,13 +129,6 @@ extern struct page *empty_zero_page;
#define _PAGE_FLAGS_CACHE_MASK (_PAGE_CACHABLE | _PAGE_BUFFER | _PAGE_WT)
/* Flags that may be modified by software */
#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY \
| _PAGE_FLAGS_CACHE_MASK)
-@@ -254,10 +247,14 @@
+@@ -254,10 +247,14 @@ static inline pte_t pte_mkyoung(pte_t pt
}
#define pmd_none(x) (!pmd_val(x))
/*
* Permanent address of a page. We don't support highmem, so this is
-@@ -295,19 +292,16 @@
+@@ -295,19 +292,16 @@ static inline pte_t pte_modify(pte_t pte
#define page_pte(page) page_pte_prot(page, __pgprot(0))
+#endif /* _ASM_SERIAL_H */
--- a/include/asm-avr32/thread_info.h
+++ b/include/asm-avr32/thread_info.h
-@@ -88,6 +88,7 @@
+@@ -88,6 +88,7 @@ static inline struct thread_info *curren
#define TIF_MEMDIE 6
#define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */
#define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */
--- a/include/asm-avr32/tlbflush.h
+++ b/include/asm-avr32/tlbflush.h
-@@ -26,7 +26,6 @@
+@@ -26,7 +26,6 @@ extern void flush_tlb_mm(struct mm_struc
extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end);
extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
+#endif
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
-@@ -1692,6 +1692,8 @@
+@@ -1692,6 +1692,8 @@ static inline void invalidate_remote_ino
extern int invalidate_inode_pages2(struct address_space *mapping);
extern int invalidate_inode_pages2_range(struct address_space *mapping,
pgoff_t start, pgoff_t end);
extern int filemap_flush(struct address_space *);
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
-@@ -188,6 +188,7 @@
+@@ -188,6 +188,7 @@ struct uart_ops {
void (*break_ctl)(struct uart_port *, int ctl);
int (*startup)(struct uart_port *);
void (*shutdown)(struct uart_port *);
+#endif /* __LINUX_USB_USBA_H */
--- a/mm/Kconfig
+++ b/mm/Kconfig
-@@ -187,7 +187,7 @@
+@@ -187,7 +187,7 @@ config BOUNCE
config NR_QUICK
int
depends on QUICKLIST
config VIRT_TO_BUS
--- a/sound/Kconfig
+++ b/sound/Kconfig
-@@ -63,6 +63,8 @@
+@@ -63,6 +63,8 @@ source "sound/aoa/Kconfig"
source "sound/arm/Kconfig"
endif
--- a/sound/Makefile
+++ b/sound/Makefile
-@@ -6,7 +6,7 @@
+@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmw
obj-$(CONFIG_SOUND_PRIME) += oss/
obj-$(CONFIG_DMASOUND) += oss/
obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
+#endif /* __SOUND_AVR32_AC97C_H */
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
-@@ -654,3 +654,7 @@
+@@ -654,3 +654,7 @@ config SOUND_SH_DAC_AUDIO_CHANNEL
int "DAC channel"
default "1"
depends on SOUND_SH_DAC_AUDIO
+ depends on SOUND_PRIME && AVR32
--- a/sound/oss/Makefile
+++ b/sound/oss/Makefile
-@@ -9,6 +9,7 @@
+@@ -9,6 +9,7 @@ obj-$(CONFIG_SOUND_OSS) += sound.o
# Please leave it as is, cause the link order is significant !
+#endif /* __SOUND_OSS_AT32_ABDAC_H__ */
--- a/sound/spi/at73c213.c
+++ b/sound/spi/at73c213.c
-@@ -737,7 +737,7 @@
+@@ -737,7 +737,7 @@ cleanup:
/*
* Device functions
*/
{
/*
* Continuous clock output.
-@@ -767,7 +767,7 @@
+@@ -767,7 +767,7 @@ static int snd_at73c213_ssc_init(struct
return 0;
}
{
int retval;
unsigned char dac_ctrl = 0;
-@@ -933,7 +933,7 @@
+@@ -933,7 +933,7 @@ out:
return retval;
}
projects / openwrt / svn-archive / openwrt.git / blobdiff