From: Jagan Teki Date: Thu, 20 Jun 2019 18:55:00 +0000 (+0530) Subject: rockchip: rk3399: Support common spl_board_init X-Git-Url: http://git.openwrt.org/openwrt/openwrt.git%24%28if?a=commitdiff_plain;h=07586ee4322abca01db52624b925e5218538f259;p=project%2Fbcm63xx%2Fu-boot.git rockchip: rk3399: Support common spl_board_init Support common spl_board_init by moving code from puma board file into, common rk3399-board-spl.c. Part of the code has sysreset-gpio, regulators_enable_boot_on but right now only puma board is using this with relevant config options rest remains common for all targets. Signed-off-by: Jagan Teki Reviewed-by: Kever Yang --- diff --git a/arch/arm/mach-rockchip/rk3399-board-spl.c b/arch/arm/mach-rockchip/rk3399-board-spl.c index 800ca80022..65c98b697d 100644 --- a/arch/arm/mach-rockchip/rk3399-board-spl.c +++ b/arch/arm/mach-rockchip/rk3399-board-spl.c @@ -11,13 +11,16 @@ #include #include #include +#include #include #include #include +#include #include #include #include #include +#include #include void board_return_to_bootrom(void) @@ -202,6 +205,66 @@ void board_init_f(ulong dummy) } } +#if defined(SPL_GPIO_SUPPORT) +static void rk3399_force_power_on_reset(void) +{ + ofnode node; + struct gpio_desc sysreset_gpio; + + debug("%s: trying to force a power-on reset\n", __func__); + + node = ofnode_path("/config"); + if (!ofnode_valid(node)) { + debug("%s: no /config node?\n", __func__); + return; + } + + if (gpio_request_by_name_nodev(node, "sysreset-gpio", 0, + &sysreset_gpio, GPIOD_IS_OUT)) { + debug("%s: could not find a /config/sysreset-gpio\n", __func__); + return; + } + + dm_gpio_set_value(&sysreset_gpio, 1); +} +#endif + +void spl_board_init(void) +{ +#if defined(SPL_GPIO_SUPPORT) + struct rk3399_cru *cru = rockchip_get_cru(); + + /* + * The RK3399 resets only 'almost all logic' (see also in the TRM + * "3.9.4 Global software reset"), when issuing a software reset. + * This may cause issues during boot-up for some configurations of + * the application software stack. + * + * To work around this, we test whether the last reset reason was + * a power-on reset and (if not) issue an overtemp-reset to reset + * the entire module. + * + * While this was previously fixed by modifying the various places + * that could generate a software reset (e.g. U-Boot's sysreset + * driver, the ATF or Linux), we now have it here to ensure that + * we no longer have to track this through the various components. + */ + if (cru->glb_rst_st != 0) + rk3399_force_power_on_reset(); +#endif + +#if defined(SPL_DM_REGULATOR) + /* + * Turning the eMMC and SPI back on (if disabled via the Qseven + * BIOS_ENABLE) signal is done through a always-on regulator). + */ + if (regulators_enable_boot_on(false)) + debug("%s: Cannot enable boot on regulator\n", __func__); +#endif + + preloader_console_init(); +} + #ifdef CONFIG_SPL_LOAD_FIT int board_fit_config_name_match(const char *name) { diff --git a/board/rockchip/evb_rk3399/evb-rk3399.c b/board/rockchip/evb_rk3399/evb-rk3399.c index 769b5d146f..c600553ff6 100644 --- a/board/rockchip/evb_rk3399/evb-rk3399.c +++ b/board/rockchip/evb_rk3399/evb-rk3399.c @@ -8,7 +8,6 @@ #include #include #include -#include int board_init(void) { @@ -64,10 +63,3 @@ int board_init(void) out: return 0; } - -void spl_board_init(void) -{ - preloader_console_init(); - - return; -} diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c index c6b509c109..251cd2d566 100644 --- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c +++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c @@ -13,10 +13,8 @@ #include #include #include -#include #include #include -#include #include #include #include @@ -38,62 +36,6 @@ int board_init(void) return 0; } -static void rk3399_force_power_on_reset(void) -{ - ofnode node; - struct gpio_desc sysreset_gpio; - - debug("%s: trying to force a power-on reset\n", __func__); - - node = ofnode_path("/config"); - if (!ofnode_valid(node)) { - debug("%s: no /config node?\n", __func__); - return; - } - - if (gpio_request_by_name_nodev(node, "sysreset-gpio", 0, - &sysreset_gpio, GPIOD_IS_OUT)) { - debug("%s: could not find a /config/sysreset-gpio\n", __func__); - return; - } - - dm_gpio_set_value(&sysreset_gpio, 1); -} - -void spl_board_init(void) -{ - int ret; - struct rk3399_cru *cru = rockchip_get_cru(); - - /* - * The RK3399 resets only 'almost all logic' (see also in the TRM - * "3.9.4 Global software reset"), when issuing a software reset. - * This may cause issues during boot-up for some configurations of - * the application software stack. - * - * To work around this, we test whether the last reset reason was - * a power-on reset and (if not) issue an overtemp-reset to reset - * the entire module. - * - * While this was previously fixed by modifying the various places - * that could generate a software reset (e.g. U-Boot's sysreset - * driver, the ATF or Linux), we now have it here to ensure that - * we no longer have to track this through the various components. - */ - if (cru->glb_rst_st != 0) - rk3399_force_power_on_reset(); - - /* - * Turning the eMMC and SPI back on (if disabled via the Qseven - * BIOS_ENABLE) signal is done through a always-on regulator). - */ - ret = regulators_enable_boot_on(false); - if (ret) - debug("%s: Cannot enable boot on regulator\n", __func__); - - preloader_console_init(); -} - static void setup_macaddr(void) { #if CONFIG_IS_ENABLED(CMD_NET) diff --git a/board/vamrs/rock960_rk3399/rock960-rk3399.c b/board/vamrs/rock960_rk3399/rock960-rk3399.c index 018e4b55b8..2eb7120e84 100644 --- a/board/vamrs/rock960_rk3399/rock960-rk3399.c +++ b/board/vamrs/rock960_rk3399/rock960-rk3399.c @@ -6,7 +6,6 @@ #include #include #include -#include int board_init(void) { @@ -18,10 +17,3 @@ int board_init(void) return 0; } - -void spl_board_init(void) -{ - preloader_console_init(); - - return; -}