Cleanup uart1-related node on ELECOM WAB-I1750-PS and enable it for
"SERIAL" port on the case.
"SERIAL" port can be used for OpenWrt console by adding the following
line to /etc/inittab and rebooting:
ttyATH1::askfirst:/usr/libexec/login.sh
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
/ {
compatible = "elecom,wab-i1750-ps", "qca,qca9558";
model = "ELECOM WAB-I1750-PS";
/ {
compatible = "elecom,wab-i1750-ps", "qca,qca9558";
model = "ELECOM WAB-I1750-PS";
-
- ahb {
- apb {
- /* "SERIAL" port (RJ-45) on the case */
- uart1: uart@18500000 {
- compatible = "qca,ar9330-uart";
- reg = <0x18500000 0x14>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pmx_uart1_in_pins &pmx_uart1_out_pins
- &jtag_disable_pins>;
-
- interrupts = <6>;
- interrupt-parent = <&miscintc>;
-
- clocks = <&pll ATH79_CLK_UART1>;
- clock-names = "uart";
-
- /* QCA955x HS UART is not supported */
- status = "disabled";
- };
- };
- };
pinctrl-single,bits = <0x3c 0x3010000 0xffff0000>;
};
};
pinctrl-single,bits = <0x3c 0x3010000 0xffff0000>;
};
};
+
+/* "SERIAL" port (RJ-45) on the case */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_uart1_in_pins &pmx_uart1_out_pins
+ &jtag_disable_pins>;
+ status = "okay";
+};