target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-a1300.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "GL.iNet GL-A1300";
  10         compatible = "glinet,gl-a1300", "qcom,ipq4019";
  11
  12         aliases {
  13                 led-boot = &led_run;
  14                 led-failsafe = &led_run;
  15                 led-running = &led_run;
  16                 led-upgrade = &led_run;
  17                 label-mac-device = &swport4;
  18         };
  19
  20         chosen {
  21                 bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1";
  22         };
  23
  24         soc {
  25                 tcsr@1949000 {
  26                         compatible = "qcom,tcsr";
  27                         reg = <0x1949000 0x100>;
  28                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  29                 };
  30
  31                 tcsr@194b000 {
  32                         /* select hostmode */
  33                         compatible = "qcom,tcsr";
  34                         reg = <0x194b000 0x100>;
  35                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  36                         status = "okay";
  37                 };
  38
  39                 ess_tcsr@1953000 {
  40                         compatible = "qcom,tcsr";
  41                         reg = <0x1953000 0x1000>;
  42                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  43                 };
  44
  45                 tcsr@1957000 {
  46                         compatible = "qcom,tcsr";
  47                         reg = <0x1957000 0x100>;
  48                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  49                 };
  50         };
  51
  52         keys {
  53                 compatible = "gpio-keys";
  54
  55                 reset {
  56                         label = "reset";
  57                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
  58                         linux,code = <KEY_RESTART>;
  59                 };
  60
  61                 switch {
  62                         label = "switch-button";
  63                         gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
  64                         linux,code = <KEY_SETUP>;
  65                 };
  66         };
  67
  68         leds {
  69                 compatible = "gpio-leds";
  70
  71                 led_run: blue {
  72                         label = "blue:status";
  73                         gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
  74                 };
  75
  76                 white {
  77                         label = "white:status";
  78                         gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
  79                 };
  80         };
  81
  82         gpio_export {
  83                 compatible = "gpio-export";
  84
  85                 usb {
  86                         gpio-export,name = "usb_power";
  87                         gpio-export,output = <1>;
  88                         gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
  89                 };
  90         };
  91 };
  92
  93 &prng {
  94         status = "okay";
  95 };
  96
  97 &mdio {
  98         status = "okay";
  99 };
 100
 101 &blsp_dma {
 102         status = "okay";
 103 };
 104
 105 &watchdog {
 106         status = "okay";
 107 };
 108
 109 &crypto {
 110         status = "okay";
 111 };
 112
 113 &cryptobam {
 114         status = "okay";
 115 };
 116
 117 &blsp1_spi1 {
 118         status = "okay";
 119
 120         pinctrl-0 = <&spi0_pins>;
 121         pinctrl-names = "default";
 122         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 5 GPIO_ACTIVE_HIGH>;
 123
 124         flash@0 {
 125                 compatible = "jedec,spi-nor";
 126                 reg = <0>;
 127                 spi-max-frequency = <24000000>;
 128
 129                 partitions {
 130                         compatible = "fixed-partitions";
 131                         #address-cells = <1>;
 132                         #size-cells = <1>;
 133
 134                         partition@0 {
 135                                 label = "SBL1";
 136                                 reg = <0x00000000 0x00040000>;
 137                                 read-only;
 138                         };
 139
 140                         partition@40000 {
 141                                 label = "MIBIB";
 142                                 reg = <0x00040000 0x00020000>;
 143                                 read-only;
 144                         };
 145
 146                         partition@60000 {
 147                                 label = "QSEE";
 148                                 reg = <0x00060000 0x00060000>;
 149                                 read-only;
 150                         };
 151
 152                         partition@c0000 {
 153                                 label = "CDT";
 154                                 reg = <0x000c0000 0x00010000>;
 155                                 read-only;
 156                         };
 157
 158                         partition@d0000 {
 159                                 label = "DDRPARAMS";
 160                                 reg = <0x000d0000 0x00010000>;
 161                                 read-only;
 162                         };
 163
 164                         partition@e0000 {
 165                                 label = "APPSBLENV"; /* uboot env*/
 166                                 reg = <0x000e0000 0x00010000>;
 167                         };
 168
 169                         partition@f0000 {
 170                                 label = "APPSBL"; /* uboot */
 171                                 reg = <0x000f0000 0x00080000>;
 172                                 read-only;
 173                         };
 174
 175                         partition@170000 {
 176                                 label = "ART";
 177                                 reg = <0x00170000 0x00010000>;
 178                                 read-only;
 179
 180                                 nvmem-layout {
 181                                         compatible = "fixed-layout";
 182                                         #address-cells = <1>;
 183                                         #size-cells = <1>;
 184
 185                                         macaddr_gmac0: macaddr@0 {
 186                                                 compatible = "mac-base";
 187                                                 reg = <0x0 0x6>;
 188                                                 #nvmem-cell-cells = <1>;
 189                                         };
 190
 191                                         macaddr_gmac1: macaddr@6 {
 192                                                 reg = <0x6 0x6>;
 193                                         };
 194
 195                                         precal_art_1000: precal@1000 {
 196                                                 reg = <0x1000 0x2f20>;
 197                                         };
 198
 199                                         precal_art_5000: precal@5000 {
 200                                                 reg = <0x5000 0x2f20>;
 201                                         };
 202                                 };
 203                         };
 204
 205                         partition@180000 {
 206                                 label = "log";
 207                                 reg = <0x00180000 0x00020000>;
 208                         };
 209                 };
 210         };
 211
 212         spi-nand@1 {
 213                 compatible = "spi-nand";
 214                 reg = <1>;
 215                 spi-max-frequency = <24000000>;
 216
 217                 partitions {
 218                         compatible = "fixed-partitions";
 219                         #address-cells = <1>;
 220                         #size-cells = <1>;
 221
 222                         partition@0 {
 223                                 label = "ubi";
 224                                 reg = <0x00000000 0x08000000>;
 225                         };
 226                 };
 227         };
 228 };
 229
 230 &blsp1_uart1 {
 231         pinctrl-0 = <&serial_pins>;
 232         pinctrl-names = "default";
 233         status = "okay";
 234 };
 235
 236 &tlmm {
 237         serial_pins: serial_pinmux {
 238                 mux {
 239                         pins = "gpio60", "gpio61";
 240                         function = "blsp_uart0";
 241                         bias-disable;
 242                 };
 243         };
 244
 245         i2c_0_pins: i2c_0_pinmux {
 246                 pinmux {
 247                         pins = "gpio58", "gpio59";
 248                         function = "blsp_i2c0";
 249                         bias-disable;
 250                 };
 251         };
 252
 253         spi0_pins: spi0_pinmux {
 254                 mux_spi {
 255                         function = "blsp_spi0";
 256                         pins = "gpio55", "gpio56", "gpio57";
 257                         drive-strength = <12>;
 258                         bias-disable;
 259                 };
 260
 261                 mux_cs {
 262                         function = "gpio";
 263                         pins = "gpio54", "gpio5";
 264                         drive-strength = <2>;
 265                         bias-disable;
 266                         output-high;
 267                 };
 268         };
 269 };
 270
 271 &blsp1_i2c3 {
 272         status = "okay";
 273         pinctrl-0 = <&i2c_0_pins>;
 274         pinctrl-names = "default";
 275 };
 276
 277 &usb2 {
 278         status = "okay";
 279 };
 280
 281 &usb3 {
 282         status = "okay";
 283 };
 284
 285 &usb2_hs_phy {
 286         status = "okay";
 287 };
 288
 289 &usb3_hs_phy {
 290         status = "okay";
 291 };
 292
 293 &usb3_ss_phy {
 294         status = "okay";
 295 };
 296
 297 &gmac {
 298         status = "okay";
 299 };
 300
 301 &switch {
 302         status = "okay";
 303 };
 304
 305 &swport3 {
 306         status = "okay";
 307
 308         label = "lan2";
 309         nvmem-cell-names = "mac-address";
 310         nvmem-cells = <&macaddr_gmac0 2>;
 311 };
 312
 313 &swport4 {
 314         status = "okay";
 315
 316         label = "lan1";
 317         nvmem-cell-names = "mac-address";
 318         nvmem-cells = <&macaddr_gmac0 0>;
 319 };
 320
 321 &swport5 {
 322         status = "okay";
 323
 324         nvmem-cell-names = "mac-address";
 325         nvmem-cells = <&macaddr_gmac1>;
 326 };
 327
 328 &wifi0 {
 329         status = "okay";
 330         nvmem-cell-names = "pre-calibration";
 331         nvmem-cells = <&precal_art_1000>;
 332         qcom,ath10k-calibration-variant = "GL-A1300";
 333 };
 334
 335 &wifi1 {
 336         status = "okay";
 337         nvmem-cell-names = "pre-calibration";
 338         nvmem-cells = <&precal_art_5000>;
 339         qcom,ath10k-calibration-variant = "GL-A1300";
 340 };