ipq40xx: add support for ASUS RT-ACRH17/RT-AC42U
authorJoshua Roys <roysjosh@gmail.com>
Thu, 30 Dec 2021 20:25:03 +0000 (15:25 -0500)
committerChristian Lamparter <chunkeey@gmail.com>
Sat, 15 Jan 2022 16:21:01 +0000 (17:21 +0100)
commit473428919197833a56a1d17103a0a054117e6f06
treebda3e37fa44c4df42afc3f4a928dd506cb9335e0
parenta350548bbdfd31745781b997727b7f2019c78ed5
ipq40xx: add support for ASUS RT-ACRH17/RT-AC42U

SOC: IPQ4019
CPU: Quad-core ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
DRAM: 256 MB
NAND: 128 MiB Macronix MX30LF1G18AC
ETH: Qualcomm Atheros QCA8075 Gigabit Switch (4x LAN, 1x WAN)
USB: 1x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC)
WLAN1: Qualcomm Atheros QCA4019 2.4GHz 802.11bgn 2x2:2
WLAN2: Qualcomm Atheros QCA9984 5GHz 802.11nac 4x4:4
INPUT: 1x WPS, 1x Reset
LEDS: Status, WIFI1, WIFI2, WAN (red & blue), 4x LAN

This board is very similar to the RT-ACRH13/RT-AC58U. It must be flashed
with an intermediary initramfs image, the jffs2 ubi volume deleted, and
then finally a sysupgrade with the final image performed.

Signed-off-by: Joshua Roys <roysjosh@gmail.com>
(added ALT0)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
board-asus_rt-ac42u.qca4019 [new file with mode: 0644]
board-asus_rt-ac42u.qca9984 [new file with mode: 0644]