From: Andre Heider Date: Sun, 20 Nov 2022 21:48:23 +0000 (+0100) Subject: nl80211: update the kernel header nl80211.h X-Git-Url: http://git.openwrt.org/project/luci.git;master?a=commitdiff_plain;h=91b2ada7878e5e4530745a2eb9b20ca47c94249b;p=project%2Fiwinfo.git nl80211: update the kernel header nl80211.h Required for NL80211_BAND_6GHZ and NL80211_FREQUENCY_ATTR_NO_HE. Taken from the v5.15.74 release, which is the current version of the used mac80211 package. Signed-off-by: Andre Heider --- diff --git a/api/nl80211.h b/api/nl80211.h index 22a709e..c2efea9 100644 --- a/api/nl80211.h +++ b/api/nl80211.h @@ -10,7 +10,8 @@ * Copyright 2008, 2009 Luis R. Rodriguez * Copyright 2008 Jouni Malinen * Copyright 2008 Colin McCabe - * Copyright 2015 Intel Deutschland GmbH + * Copyright 2015-2017 Intel Deutschland GmbH + * Copyright (C) 2018-2021 Intel Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -48,8 +49,14 @@ #define NL80211_MULTICAST_GROUP_REG "regulatory" #define NL80211_MULTICAST_GROUP_MLME "mlme" #define NL80211_MULTICAST_GROUP_VENDOR "vendor" +#define NL80211_MULTICAST_GROUP_NAN "nan" #define NL80211_MULTICAST_GROUP_TESTMODE "testmode" +#define NL80211_EDMG_BW_CONFIG_MIN 4 +#define NL80211_EDMG_BW_CONFIG_MAX 15 +#define NL80211_EDMG_CHANNELS_MIN 1 +#define NL80211_EDMG_CHANNELS_MAX 0x3c /* 0b00111100 */ + /** * DOC: Station handling * @@ -171,6 +178,128 @@ * Multiple such rules can be created. */ +/** + * DOC: WPA/WPA2 EAPOL handshake offload + * + * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers + * can indicate they support offloading EAPOL handshakes for WPA/WPA2 + * preshared key authentication in station mode. In %NL80211_CMD_CONNECT + * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers + * supporting this offload may reject the %NL80211_CMD_CONNECT when no + * preshared key material is provided, for example when that driver does + * not support setting the temporal keys through %NL80211_CMD_NEW_KEY. + * + * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be + * set by drivers indicating offload support of the PTK/GTK EAPOL + * handshakes during 802.1X authentication in station mode. In order to + * use the offload the %NL80211_CMD_CONNECT should have + * %NL80211_ATTR_WANT_1X_4WAY_HS attribute flag. Drivers supporting this + * offload may reject the %NL80211_CMD_CONNECT when the attribute flag is + * not present. + * + * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK flag drivers + * can indicate they support offloading EAPOL handshakes for WPA/WPA2 + * preshared key authentication in AP mode. In %NL80211_CMD_START_AP + * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers + * supporting this offload may reject the %NL80211_CMD_START_AP when no + * preshared key material is provided, for example when that driver does + * not support setting the temporal keys through %NL80211_CMD_NEW_KEY. + * + * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK + * using %NL80211_CMD_SET_PMK. For offloaded FT support also + * %NL80211_ATTR_PMKR0_NAME must be provided. + */ + +/** + * DOC: FILS shared key authentication offload + * + * FILS shared key authentication offload can be advertized by drivers by + * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support + * FILS shared key authentication offload should be able to construct the + * authentication and association frames for FILS shared key authentication and + * eventually do a key derivation as per IEEE 802.11ai. The below additional + * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in + * %NL80211_CMD_UPDATE_CONNECT_PARAMS. + * %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai + * %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai + * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message + * %NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK + * rIK should be used to generate an authentication tag on the ERP message and + * rMSK should be used to derive a PMKSA. + * rIK, rMSK should be generated and keyname_nai, sequence number should be used + * as specified in IETF RFC 6696. + * + * When FILS shared key authentication is completed, driver needs to provide the + * below additional parameters to userspace, which can be either after setting + * up a connection or after roaming. + * %NL80211_ATTR_FILS_KEK - used for key renewal + * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges + * %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated + * %Nl80211_ATTR_PMK - used to update PMKSA cache in userspace + * The PMKSA can be maintained in userspace persistently so that it can be used + * later after reboots or wifi turn off/on also. + * + * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS + * capable AP supporting PMK caching. It specifies the scope within which the + * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and + * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based + * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with + * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to + * use in a FILS shared key connection with PMKSA caching. + */ + +/** + * DOC: SAE authentication offload + * + * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they + * support offloading SAE authentication for WPA3-Personal networks in station + * mode. Similarly @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP flag can be set by + * drivers indicating the offload support in AP mode. + * + * The password for SAE should be specified using %NL80211_ATTR_SAE_PASSWORD in + * %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP for station and AP mode + * respectively. + */ + +/** + * DOC: VLAN offload support for setting group keys and binding STAs to VLANs + * + * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they + * support offloading VLAN functionality in a manner where the driver exposes a + * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs + * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet + * case. Frames received from stations that are not assigned to any VLAN are + * delivered on the main netdev and frames to such stations can be sent through + * that main netdev. + * + * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and + * %NL80211_CMD_SET_STATION will optionally specify vlan_id using + * %NL80211_ATTR_VLAN_ID. + */ + +/** + * DOC: TID configuration + * + * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG + * attribute given in wiphy capabilities. + * + * The necessary configuration parameters are mentioned in + * &enum nl80211_tid_config_attr and it will be passed to the + * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG. + * + * If the configuration needs to be applied for specific peer then the MAC + * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the + * configuration will be applied for all the connected peers in the vif except + * any peers that have peer specific configuration for the TID by default; if + * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values + * will be overwritten. + * + * All this configuration is valid only for STA's current connection + * i.e. the configuration will be reset to default when the STA connects back + * after disconnection/roaming, and this configuration will be cleared when + * the interface goes down. + */ + /** * enum nl80211_commands - supported nl80211 commands * @@ -180,13 +309,14 @@ * to get a list of all present wiphys. * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, - * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the - * attributes determining the channel width; this is used for setting - * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT, - * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, - * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. - * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL - * instead, the support here is for backward compatibility only. + * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, + * %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the + * channel width; this is used for setting monitor mode channel), + * %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG, + * %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or + * %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel, + * see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward + * compatibility only. * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request * or rename notification. Has attributes %NL80211_ATTR_WIPHY and * %NL80211_ATTR_WIPHY_NAME. @@ -235,7 +365,8 @@ * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. * The channel to use can be set on the interface or be given using the - * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. + * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the + * attributes determining channel width. * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP @@ -245,7 +376,7 @@ * @NL80211_CMD_SET_STATION: Set station attributes for station identified by * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the - * the interface identified by %NL80211_ATTR_IFINDEX. + * interface identified by %NL80211_ATTR_IFINDEX. * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC * or, if no MAC address given, all stations, on the interface identified * by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and @@ -265,7 +396,7 @@ * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by * %NL80211_ATTR_MAC. * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the - * the interface identified by %NL80211_ATTR_IFINDEX. + * interface identified by %NL80211_ATTR_IFINDEX. * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC * or, if no MAC address given, all mesh paths, on the interface identified * by %NL80211_ATTR_IFINDEX. @@ -322,7 +453,9 @@ * @NL80211_CMD_GET_SCAN: get scan results * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the - * probe requests at CCK rate or not. + * probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to + * specify a BSSID to scan for; if not included, the wildcard BSSID will + * be used. * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to * NL80211_CMD_GET_SCAN and on the "scan" multicast group) * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, @@ -348,7 +481,9 @@ * are used. Extra IEs can also be passed from the userspace by * using the %NL80211_ATTR_IE attribute. The first cycle of the * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY - * is supplied. + * is supplied. If the device supports multiple concurrent scheduled + * scans, it will allow such when the caller provides the flag attribute + * %NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it. * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if * scheduled scan is not running. The caller may assume that as soon * as the call returns, it is safe to start a new scheduled scan again. @@ -367,10 +502,18 @@ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) * - * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC - * (for the BSSID) and %NL80211_ATTR_PMKID. + * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC + * (for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK + * (PMK is used for PTKSA derivation in case of FILS shared key offload) or + * using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID, + * %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS + * authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier + * advertized by a FILS capable AP identifying the scope of PMKSA in an + * ESS. * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC - * (for the BSSID) and %NL80211_ATTR_PMKID. + * (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID, + * %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS + * authentication. * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. * * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain @@ -408,11 +551,12 @@ * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify * the SSID (mainly for association, but is included in authentication - * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used - * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE - * is used to specify the authentication type. %NL80211_ATTR_IE is used to - * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) - * to be added to the frame. + * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ + + * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the + * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the + * authentication type. %NL80211_ATTR_IE is used to define IEs + * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added + * to the frame. * When used as an event, this reports reception of an Authentication * frame in station and IBSS modes when the local MLME processed the * frame, i.e., it was for the local STA and was received in correct @@ -427,7 +571,11 @@ * @NL80211_CMD_ASSOCIATE: association request and notification; like * NL80211_CMD_AUTHENTICATE but for Association and Reassociation * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, - * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). + * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The + * %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the + * request is for the initial association to an ESS (that attribute not + * included) or for reassociation within the ESS (that attribute is + * included). * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication @@ -463,10 +611,12 @@ * requests to connect to a specified network but without separating * auth and assoc steps. For this, you need to specify the SSID in a * %NL80211_ATTR_SSID attribute, and can optionally specify the association - * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, - * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, + * %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, + * %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT, * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, - * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, + * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and * %NL80211_ATTR_WIPHY_FREQ_HINT. * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are * restrictions on BSS selection, i.e., they effectively prevent roaming @@ -477,6 +627,17 @@ * set of BSSID,frequency parameters is used (i.e., either the enforcing * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). + * Driver shall not modify the IEs specified through %NL80211_ATTR_IE if + * %NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is + * included, these IEs through %NL80211_ATTR_IE are specified by the user + * space based on the best possible BSS selected. Thus, if the driver ends + * up selecting a different BSS, it can modify these IEs accordingly (e.g. + * userspace asks the driver to perform PMKSA caching with BSS1 and the + * driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE + * has to get updated with the apt PMKID). + * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within + * the ESS in case the device is already associated and an association with + * a different BSS is desired. * Background scan period can optionally be * specified in %NL80211_ATTR_BG_SCAN_PERIOD, * if not specified default background scan configuration @@ -484,9 +645,19 @@ * This attribute is ignored if driver does not support roam scan. * It is also sent as an event, with the BSSID and response IEs when the * connection is established or failed to be established. This can be - * determined by the STATUS_CODE attribute. - * @NL80211_CMD_ROAM: request that the card roam (currently not implemented), - * sent as an event when the card/driver roamed by itself. + * determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success, + * non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the + * event, the connection attempt failed due to not being able to initiate + * authentication/association or not receiving a response from the AP. + * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as + * well to remain backwards compatible. + * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself. + * When a security association was established on an 802.1X network using + * fast transition, this event should be followed by an + * %NL80211_CMD_PORT_AUTHORIZED event. + * Following a %NL80211_CMD_ROAM event userspace can issue + * %NL80211_CMD_GET_SCAN in order to obtain the scan information for the + * new BSS the card/driver roamed to. * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify * userspace that a connection was dropped by the AP or due to other * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and @@ -532,6 +703,10 @@ * four bytes for vendor frames including the OUI. The registration * cannot be dropped, but is removed automatically when the netlink * socket is closed. Multiple registrations can be made. + * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if + * %NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which + * case the registration can also be modified to include/exclude the + * flag, rather than requiring unregistration to change it. * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for * backward compatibility * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This @@ -554,7 +729,9 @@ * is used during CSA period. * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this * command may be used with the corresponding cookie to cancel the wait - * time if it is known that it is no longer necessary. + * time if it is known that it is no longer necessary. This command is + * also sent as an event whenever the driver has completed the off-channel + * wait time. * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility. * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies @@ -583,7 +760,22 @@ * of any other interfaces, and other interfaces will again take * precedence when they are used. * - * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface. + * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface + * (no longer supported). + * + * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform + * multicast to unicast conversion. When enabled, all multicast packets + * with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header) + * will be sent out to each station once with the destination (multicast) + * MAC address replaced by the station's MAC address. Note that this may + * break certain expectations of the receiver, e.g. the ability to drop + * unicast IP packets encapsulated in multicast L2 frames, or the ability + * to not send destination unreachable messages in such cases. + * This can only be toggled per BSS. Configure this on an interface of + * type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces + * (%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode. + * If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this + * command, the feature is disabled. * * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial * mesh config parameters may be given. @@ -615,7 +807,7 @@ * various triggers. These triggers can be configured through this * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For * more background information, see - * http://wireless.kernel.org/en/users/Documentation/WoWLAN. + * https://wireless.wiki.kernel.org/en/users/Documentation/WoWLAN. * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification * from the driver reporting the wakeup reason. In this case, the * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason @@ -755,7 +947,7 @@ * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules. * * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the - * the new channel information (Channel Switch Announcement - CSA) + * new channel information (Channel Switch Announcement - CSA) * in the beacon for some time (as defined in the * %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the * new channel. Userspace provides the new channel information (using @@ -824,6 +1016,190 @@ * not running. The driver indicates the status of the scan through * cfg80211_scan_done(). * + * @NL80211_CMD_START_NAN: Start NAN operation, identified by its + * %NL80211_ATTR_WDEV interface. This interface must have been + * previously created with %NL80211_CMD_NEW_INTERFACE. After it + * has been started, the NAN interface will create or join a + * cluster. This command must have a valid + * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional + * %NL80211_ATTR_BANDS attributes. If %NL80211_ATTR_BANDS is + * omitted or set to 0, it means don't-care and the device will + * decide what to use. After this command NAN functions can be + * added. + * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by + * its %NL80211_ATTR_WDEV interface. + * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined + * with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this + * operation returns the strictly positive and unique instance id + * (%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE) + * of the function upon success. + * Since instance ID's can be re-used, this cookie is the right + * way to identify the function. This will avoid races when a termination + * event is handled by the user space after it has already added a new + * function that got the same instance id from the kernel as the one + * which just terminated. + * This cookie may be used in NAN events even before the command + * returns, so userspace shouldn't process NAN events until it processes + * the response to this command. + * Look at %NL80211_ATTR_SOCKET_OWNER as well. + * @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie. + * This command is also used as a notification sent when a NAN function is + * terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID + * and %NL80211_ATTR_COOKIE attributes. + * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN + * configuration. NAN must be operational (%NL80211_CMD_START_NAN + * was executed). It must contain at least one of the following + * attributes: %NL80211_ATTR_NAN_MASTER_PREF, + * %NL80211_ATTR_BANDS. If %NL80211_ATTR_BANDS is omitted, the + * current configuration is not changed. If it is present but + * set to zero, the configuration is changed to don't-care + * (i.e. the device can decide what to do). + * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported. + * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and + * %NL80211_ATTR_COOKIE. + * + * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters + * for subsequent roaming cases if the driver or firmware uses internal + * BSS selection. This command can be issued only while connected and it + * does not result in a change for the current association. Currently, + * only the %NL80211_ATTR_IE data is used and updated with this command. + * + * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0 + * for the given authenticator address (specified with %NL80211_ATTR_MAC). + * When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the + * PMK-R0, otherwise it specifies the PMK. + * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously + * configured PMK for the authenticator address identified by + * %NL80211_ATTR_MAC. + * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was + * completed successfully. Drivers that support 4 way handshake offload + * should send this event after indicating 802.1X FT assocation with + * %NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT + * should be indicated instead. + * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request + * and RX notification. This command is used both as a request to transmit + * a control port frame and as a notification that a control port frame + * has been received. %NL80211_ATTR_FRAME is used to specify the + * frame contents. The frame is the raw EAPoL data, without ethernet or + * 802.11 headers. + * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added + * indicating the protocol type of the received frame; whether the frame + * was received unencrypted and the MAC address of the peer respectively. + * + * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded. + * + * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host + * drivers that do not define separate commands for authentication and + * association, but rely on user space for the authentication to happen. + * This interface acts both as the event request (driver to user space) + * to trigger the authentication and command response (userspace to + * driver) to indicate the authentication status. + * + * User space uses the %NL80211_CMD_CONNECT command to the host driver to + * trigger a connection. The host driver selects a BSS and further uses + * this interface to offload only the authentication part to the user + * space. Authentication frames are passed between the driver and user + * space through the %NL80211_CMD_FRAME interface. Host driver proceeds + * further with the association after getting successful authentication + * status. User space indicates the authentication status through + * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH + * command interface. + * + * Host driver reports this status on an authentication failure to the + * user space through the connect result as the user space would have + * initiated the connection through the connect request. + * + * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's + * ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE, + * %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its + * address(specified in %NL80211_ATTR_MAC). + * + * @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in + * the %NL80211_ATTR_FTM_RESPONDER_STATS attribute. + * + * @NL80211_CMD_PEER_MEASUREMENT_START: start a (set of) peer measurement(s) + * with the given parameters, which are encapsulated in the nested + * %NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address + * randomization may be enabled and configured by specifying the + * %NL80211_ATTR_MAC and %NL80211_ATTR_MAC_MASK attributes. + * If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute. + * A u64 cookie for further %NL80211_ATTR_COOKIE use is returned in + * the netlink extended ack message. + * + * To cancel a measurement, close the socket that requested it. + * + * Measurement results are reported to the socket that requested the + * measurement using @NL80211_CMD_PEER_MEASUREMENT_RESULT when they + * become available, so applications must ensure a large enough socket + * buffer size. + * + * Depending on driver support it may or may not be possible to start + * multiple concurrent measurements. + * @NL80211_CMD_PEER_MEASUREMENT_RESULT: This command number is used for the + * result notification from the driver to the requesting socket. + * @NL80211_CMD_PEER_MEASUREMENT_COMPLETE: Notification only, indicating that + * the measurement completed, using the measurement cookie + * (%NL80211_ATTR_COOKIE). + * + * @NL80211_CMD_NOTIFY_RADAR: Notify the kernel that a radar signal was + * detected and reported by a neighboring device on the channel + * indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes + * determining the width and type. + * + * @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to + * offload OWE processing to user space. This intends to support + * OWE AKM by the host drivers that implement SME but rely + * on the user space for the cryptographic/DH IE processing in AP mode. + * + * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric + * refreshing, is that from one mesh point we be able to send some data + * frames to other mesh points which are not currently selected as a + * primary traffic path, but which are only 1 hop away. The absence of + * the primary path to the chosen node makes it necessary to apply some + * form of marking on a chosen packet stream so that the packets can be + * properly steered to the selected node for testing, and not by the + * regular mesh path lookup. Further, the packets must be of type data + * so that the rate control (often embedded in firmware) is used for + * rate selection. + * + * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh + * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame + * content. The frame is ethernet data. + * + * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration + * is passed using %NL80211_ATTR_TID_CONFIG attribute. + * + * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon + * frame. This event is used to indicate that a received Beacon frame was + * dropped because it did not include a valid MME MIC while beacon + * protection was enabled (BIGTK configured in station mode). + * + * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control + * port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME. + * %NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME + * includes the contents of the frame. %NL80211_ATTR_ACK flag is included + * if the recipient acknowledged the frame. + * + * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is + * passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to + * specify the wiphy index to be applied to. + * + * @NL80211_CMD_OBSS_COLOR_COLLISION: This notification is sent out whenever + * mac80211/drv detects a bss color collision. + * + * @NL80211_CMD_COLOR_CHANGE_REQUEST: This command is used to indicate that + * userspace wants to change the BSS color. + * + * @NL80211_CMD_COLOR_CHANGE_STARTED: Notify userland, that a color change has + * started + * + * @NL80211_CMD_COLOR_CHANGE_ABORTED: Notify userland, that the color change has + * been aborted + * + * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change + * has completed + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1012,6 +1388,58 @@ enum nl80211_commands { NL80211_CMD_ABORT_SCAN, + NL80211_CMD_START_NAN, + NL80211_CMD_STOP_NAN, + NL80211_CMD_ADD_NAN_FUNCTION, + NL80211_CMD_DEL_NAN_FUNCTION, + NL80211_CMD_CHANGE_NAN_CONFIG, + NL80211_CMD_NAN_MATCH, + + NL80211_CMD_SET_MULTICAST_TO_UNICAST, + + NL80211_CMD_UPDATE_CONNECT_PARAMS, + + NL80211_CMD_SET_PMK, + NL80211_CMD_DEL_PMK, + + NL80211_CMD_PORT_AUTHORIZED, + + NL80211_CMD_RELOAD_REGDB, + + NL80211_CMD_EXTERNAL_AUTH, + + NL80211_CMD_STA_OPMODE_CHANGED, + + NL80211_CMD_CONTROL_PORT_FRAME, + + NL80211_CMD_GET_FTM_RESPONDER_STATS, + + NL80211_CMD_PEER_MEASUREMENT_START, + NL80211_CMD_PEER_MEASUREMENT_RESULT, + NL80211_CMD_PEER_MEASUREMENT_COMPLETE, + + NL80211_CMD_NOTIFY_RADAR, + + NL80211_CMD_UPDATE_OWE_INFO, + + NL80211_CMD_PROBE_MESH_LINK, + + NL80211_CMD_SET_TID_CONFIG, + + NL80211_CMD_UNPROT_BEACON, + + NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS, + + NL80211_CMD_SET_SAR_SPECS, + + NL80211_CMD_OBSS_COLOR_COLLISION, + + NL80211_CMD_COLOR_CHANGE_REQUEST, + + NL80211_CMD_COLOR_CHANGE_STARTED, + NL80211_CMD_COLOR_CHANGE_ABORTED, + NL80211_CMD_COLOR_CHANGE_COMPLETED, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1057,7 +1485,8 @@ enum nl80211_commands { * of &enum nl80211_chan_width, describing the channel width. See the * documentation of the enum for more information. * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the - * channel, used for anything but 20 MHz bandwidth + * channel, used for anything but 20 MHz bandwidth. In S1G this is the + * operating channel center frequency. * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the * channel, used only for 80+80 MHz bandwidth * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ @@ -1122,7 +1551,7 @@ enum nl80211_commands { * rates as defined by IEEE 802.11 7.3.2.2 but without the length * restriction (at most %NL80211_MAX_SUPP_RATES). * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station - * to, or the AP interface the station was originally added to to. + * to, or the AP interface the station was originally added to. * @NL80211_ATTR_STA_INFO: information about a station, part of station info * given for %NL80211_CMD_GET_STATION, nested attribute containing * info as possible, see &enum nl80211_sta_info. @@ -1234,8 +1663,12 @@ enum nl80211_commands { * * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is * used for the association (&enum nl80211_mfp, represented as a u32); - * this attribute can be used - * with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests + * this attribute can be used with %NL80211_CMD_ASSOCIATE and + * %NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for + * %NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it + * must have decided whether to use management frame protection or not. + * Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will + * let the driver (or the firmware) decide whether to use MFP or not. * * @NL80211_ATTR_STA_FLAGS2: Attribute containing a * &struct nl80211_sta_flag_update. @@ -1255,6 +1688,16 @@ enum nl80211_commands { * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom * ethertype frames used for key negotiation must not be encrypted. + * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control + * port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE) + * will be sent directly to the network interface or sent via the NL80211 + * socket. If this attribute is missing, then legacy behavior of sending + * control port frames directly to the network interface is used. If the + * flag is included, then control port frames are sent over NL80211 instead + * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is + * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER + * flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth + * frames are not forwared over the control port. * * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. * We recommend using nested, driver-specific attributes within this. @@ -1279,14 +1722,23 @@ enum nl80211_commands { * (a u32 with flags from &enum nl80211_wpa_versions). * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to * indicate which key management algorithm(s) to use (an array of u32). + * This attribute is also sent in response to @NL80211_CMD_GET_WIPHY, + * indicating the supported AKM suites, intended for specific drivers which + * implement SME and have constraints on which AKMs are supported and also + * the cases where an AKM support is offloaded to the driver/firmware. + * If there is no such notification from the driver, user space should + * assume the driver supports all the AKM suites. * * @NL80211_ATTR_REQ_IE: (Re)association request information elements as * sent out by the card, for ROAM and successful CONNECT events. * @NL80211_ATTR_RESP_IE: (Re)association response information elements as * sent by peer, for ROAM and successful CONNECT events. * - * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE - * commands to specify using a reassociate frame + * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT + * commands to specify a request to reassociate within an ESS, i.e., to use + * Reassociate Request frame (with the value of this attribute in the + * Current AP address field) instead of Association Request frame which is + * used for the initial association to an ESS. * * @NL80211_ATTR_KEY: key information in a nested attribute with * %NL80211_KEY_* sub-attributes @@ -1326,7 +1778,14 @@ enum nl80211_commands { * enum nl80211_band value is used as the index (nla_type() of the nested * data. If a band is not included, it will be configured to allow all * rates based on negotiated supported rates information. This attribute - * is used with %NL80211_CMD_SET_TX_BITRATE_MASK. + * is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP, + * and joining mesh networks (not IBSS yet). In the later case, it must + * specify just a single bitrate, which is to be used for the beacon. + * The driver must also specify support for this with the extended + * features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, + * NL80211_EXT_FEATURE_BEACON_RATE_HT, + * NL80211_EXT_FEATURE_BEACON_RATE_VHT and + * NL80211_EXT_FEATURE_BEACON_RATE_HE. * * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. @@ -1446,7 +1905,7 @@ enum nl80211_commands { * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID * is included in the probe request, but the match attributes * will never let it go through), -EINVAL may be returned. - * If ommited, no filtering is done. + * If omitted, no filtering is done. * * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported * interface combinations. In each nested item, it contains attributes @@ -1530,8 +1989,15 @@ enum nl80211_commands { * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire * probe-response frame. The DA field in the 802.11 header is zero-ed out, * to be filled by the FW. - * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable - * this feature. Currently, only supported in mac80211 drivers. + * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable + * this feature during association. This is a flag attribute. + * Currently only supported in mac80211 drivers. + * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable + * this feature during association. This is a flag attribute. + * Currently only supported in mac80211 drivers. + * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable + * this feature during association. This is a flag attribute. + * Currently only supported in mac80211 drivers. * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the * ATTR_HT_CAPABILITY to which attention should be paid. * Currently, only mac80211 NICs support this feature. @@ -1551,7 +2017,7 @@ enum nl80211_commands { * * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be * used by the drivers which has MLME in firmware and does not have support - * to report per station tx/rx activity to free up the staion entry from + * to report per station tx/rx activity to free up the station entry from * the list. This needs to be used when the driver advertises the * capability to timeout the stations. * @@ -1572,8 +2038,16 @@ enum nl80211_commands { * the connection request from a station. nl80211_connect_failed_reason * enum has different reasons of connection failure. * - * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts - * with the Authentication transaction sequence number field. + * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames. + * This contains the authentication frame body (non-IE and IE data), + * excluding the Authentication algorithm number, i.e., starting at the + * Authentication transaction sequence number field. It is used with + * authentication algorithms that need special fields to be added into + * the frames (SAE and FILS). Currently, only the SAE cases use the + * initial two fields (Authentication transaction sequence number and + * Status code). However, those fields are included in the attribute data + * for all authentication algorithms to keep the attribute definition + * consistent. * * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from * association request when used with NL80211_CMD_NEW_STATION) @@ -1644,13 +2118,14 @@ enum nl80211_commands { * until the channel switch event. * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission * must be blocked on the current channel (before the channel switch - * operation). + * operation). Also included in the channel switch started event if quiet + * was requested by the AP. * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information * for the time while performing a channel switch. - * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel - * switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL). - * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel - * switch counters in the probe response (%NL80211_ATTR_PROBE_RESP). + * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel + * switch or color change counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL). + * @NL80211_ATTR_CNTDWN_OFFS_PRESP: An array of offsets (u16) to the channel + * switch or color change counters in the probe response (%NL80211_ATTR_PROBE_RESP). * * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32. * As specified in the &enum nl80211_rxmgmt_flags. @@ -1658,7 +2133,7 @@ enum nl80211_commands { * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels. * * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported - * supported operating classes. + * operating classes. * * @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space * controls DFS operation in IBSS mode. If the flag is included in @@ -1674,7 +2149,9 @@ enum nl80211_commands { * * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode * Notification Element based on association request when used with - * %NL80211_CMD_NEW_STATION; u8 attribute. + * %NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when + * %NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS); + * u8 attribute. * * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if * %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet) @@ -1716,6 +2193,19 @@ enum nl80211_commands { * regulatory indoor configuration would be owned by the netlink socket * that configured the indoor setting, and the indoor operation would be * cleared when the socket is closed. + * If set during NAN interface creation, the interface will be destroyed + * if the socket is closed just like any other interface. Moreover, NAN + * notifications will be sent in unicast to that socket. Without this + * attribute, the notifications will be sent to the %NL80211_MCGRP_NAN + * multicast group. + * If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the + * station will deauthenticate when the socket is closed. + * If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically + * torn down when the socket is closed. + * If set during %NL80211_CMD_JOIN_MESH the mesh setup will be + * automatically torn down when the socket is closed. + * If set during %NL80211_CMD_START_AP the AP will be automatically + * disabled when the socket is closed. * * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is * the TDLS link initiator. @@ -1727,6 +2217,8 @@ enum nl80211_commands { * underlying device supports these minimal RRM features: * %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES, * %NL80211_FEATURE_QUIET, + * Or, if global RRM is supported, see: + * %NL80211_EXT_FEATURE_RRM * If this flag is used, driver must add the Power Capabilities IE to the * association request. In addition, it must also set the RRM capability * flag in the association request's Capability Info field. @@ -1789,6 +2281,317 @@ enum nl80211_commands { * thus it must not specify the number of iterations, only the interval * between scans. The scan plans are executed sequentially. * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan. + * @NL80211_ATTR_PBSS: flag attribute. If set it means operate + * in a PBSS. Specified in %NL80211_CMD_CONNECT to request + * connecting to a PCP, and in %NL80211_CMD_START_AP to start + * a PCP instead of AP. Relevant for DMG networks only. + * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the + * BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains + * attributes according &enum nl80211_bss_select_attr to indicate what + * BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT + * it contains the behaviour-specific attribute containing the parameters for + * BSS selection to be done by driver and/or firmware. + * + * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported + * or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status + * + * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment + * + * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes: + * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA, + * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per + * interface type. + * + * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO + * groupID for monitor mode. + * The first 8 bytes are a mask that defines the membership in each + * group (there are 64 groups, group 0 and 63 are reserved), + * each bit represents a group and set to 1 for being a member in + * that group and 0 for not being a member. + * The remaining 16 bytes define the position in each group: 2 bits for + * each group. + * (smaller group numbers represented on most significant bits and bigger + * group numbers on least significant bits.) + * This attribute is used only if all interfaces are in monitor mode. + * Set this attribute in order to monitor packets using the given MU-MIMO + * groupID data. + * to turn off that feature set all the bits of the groupID to zero. + * @NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR: mac address for the sniffer to follow + * when using MU-MIMO air sniffer. + * to turn that feature off set an invalid mac address + * (e.g. FF:FF:FF:FF:FF:FF) + * + * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually + * started (u64). The time is the TSF of the BSS the interface that + * requested the scan is connected to (if available, otherwise this + * attribute must not be included). + * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which + * %NL80211_ATTR_SCAN_START_TIME_TSF is set. + * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If + * %NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the + * maximum measurement duration allowed. This attribute is used with + * measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN + * if the scan is used for beacon report radio measurement. + * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates + * that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is + * mandatory. If this flag is not set, the duration is the maximum duration + * and the actual measurement duration may be shorter. + * + * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is + * used to pull the stored data for mesh peer in power save state. + * + * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by + * %NL80211_CMD_START_NAN and optionally with + * %NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0. + * Also, values 1 and 255 are reserved for certification purposes and + * should not be used during a normal device operation. + * @NL80211_ATTR_BANDS: operating bands configuration. This is a u32 + * bitmask of BIT(NL80211_BAND_*) as described in %enum + * nl80211_band. For instance, for NL80211_BAND_2GHZ, bit 0 + * would be set. This attribute is used with + * %NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and + * it is optional. If no bands are set, it means don't-care and + * the device will decide what to use. + * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See + * &enum nl80211_nan_func_attributes for description of this nested + * attribute. + * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute. + * See &enum nl80211_nan_match_attributes. + * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame + * protection. + * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association + * Request/Response frame protection. This attribute contains the 16 octet + * STA Nonce followed by 16 octets of AP Nonce. + * + * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast + * packets should be send out as unicast to all stations (flag attribute). + * + * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also + * used in various commands/events for specifying the BSSID. + * + * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which + * other BSSs has to be better or slightly worse than the current + * connected BSS so that they get reported to user space. + * This will give an opportunity to userspace to consider connecting to + * other matching BSSs which have better or slightly worse RSSI than + * the current connected BSS by using an offloaded operation to avoid + * unnecessary wakeups. + * + * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in + * the specified band is to be adjusted before doing + * %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparison to figure out + * better BSSs. The attribute value is a packed structure + * value as specified by &struct nl80211_bss_select_rssi_adjust. + * + * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out. + * u32 attribute with an &enum nl80211_timeout_reason value. This is used, + * e.g., with %NL80211_CMD_CONNECT event. + * + * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP) + * username part of NAI used to refer keys rRK and rIK. This is used with + * %NL80211_CMD_CONNECT. + * + * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part + * of NAI specifying the domain name of the ER server. This is used with + * %NL80211_CMD_CONNECT. + * + * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number + * to use in ERP messages. This is used in generating the FILS wrapped data + * for FILS authentication and is used with %NL80211_CMD_CONNECT. + * + * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the + * NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and + * %NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK + * from successful FILS authentication and is used with + * %NL80211_CMD_CONNECT. + * + * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP + * identifying the scope of PMKSAs. This is used with + * @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA. + * + * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with + * %NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID. + * For %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP it is used to provide + * PSK for offloading 4-way handshake for WPA/WPA2-PSK networks. For 802.1X + * authentication it is used with %NL80211_CMD_SET_PMK. For offloaded FT + * support this attribute specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME + * is included as well. + * + * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to + * indicate that it supports multiple active scheduled scan requests. + * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled + * scan request that may be active for the device (u32). + * + * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include + * in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it + * wants to use the supported offload of the 4-way handshake. + * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT. + * @NL80211_ATTR_PORT_AUTHORIZED: (reserved) + * + * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external + * authentication operation (u32 attribute with an + * &enum nl80211_external_auth_action value). This is used with the + * %NL80211_CMD_EXTERNAL_AUTH request event. + * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user + * space supports external authentication. This attribute shall be used + * with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver + * may offload authentication processing to user space if this capability + * is indicated in the respective requests from the user space. + * + * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this + * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED. + * + * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum + * nl80211_txq_stats) + * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy. + * The smaller of this and the memory limit is enforced. + * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory limit (in bytes) for the + * TXQ queues for this phy. The smaller of this and the packet limit is + * enforced. + * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes + * a flow is assigned on each round of the DRR scheduler. + * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION). Can be set + * only if %NL80211_STA_FLAG_WME is set. + * + * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include + * in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing + * measurement (FTM) responder functionality and containing parameters as + * possible, see &enum nl80211_ftm_responder_attr + * + * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder + * statistics, see &enum nl80211_ftm_responder_stats. + * + * @NL80211_ATTR_TIMEOUT: Timeout for the given operation in milliseconds (u32), + * if the attribute is not given no timeout is requested. Note that 0 is an + * invalid value. + * + * @NL80211_ATTR_PEER_MEASUREMENTS: peer measurements request (and result) + * data, uses nested attributes specified in + * &enum nl80211_peer_measurement_attrs. + * This is also used for capability advertisement in the wiphy information, + * with the appropriate sub-attributes. + * + * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime + * scheduler. + * + * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for + * station associated with the AP. See &enum nl80211_tx_power_setting for + * possible values. + * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This + * allows to set Tx power for a station. If this attribute is not included, + * the default per-interface tx power setting will be overriding. Driver + * should be picking up the lowest tx power, either tx power per-interface + * or per-station. + * + * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It + * is used with %NL80211_CMD_CONNECT to provide password for offloading + * SAE authentication for WPA3-Personal networks. + * + * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support. + * + * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection + * functionality. + * + * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz + * channel(s) that are allowed to be used for EDMG transmissions. + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute) + * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes + * the allowed channel bandwidth configurations. (u8 attribute) + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. + * + * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key + * (u16). + * + * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings. + * + * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry + * using attributes from &enum nl80211_iftype_akm_attributes. This + * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating + * supported AKM suites capability per interface. AKMs advertised in + * %NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not + * advertised for a specific interface type. + * + * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a + * nested attribute with &enum nl80211_tid_config_attr sub-attributes; + * on output (in wiphy attributes) it contains only the feature sub- + * attributes. + * + * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control + * port in order to forward/receive them as ordinary data frames. + * + * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32, + * dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value). + * An optional parameter configured through %NL80211_CMD_SET_PMKSA. + * Drivers that trigger roaming need to know the lifetime of the + * configured PMKSA for triggering the full vs. PMKSA caching based + * authentication. This timeout helps authentication methods like SAE, + * where PMK gets updated only by going through a full (new SAE) + * authentication instead of getting updated during an association for EAP + * authentication. No new full authentication within the PMK expiry shall + * result in a disassociation at the end of the lifetime. + * + * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in + * terms of percentage of %NL80211_ATTR_PMK_LIFETIME + * (u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional + * parameter configured through %NL80211_CMD_SET_PMKSA. Requests the + * driver to trigger a full authentication roam (without PMKSA caching) + * after the reauthentication threshold time, but before the PMK lifetime + * has expired. + * + * Authentication methods like SAE need to be able to generate a new PMKSA + * entry without having to force a disconnection after the PMK timeout. If + * no roaming occurs between the reauth threshold and PMK expiration, + * disassociation is still forced. + * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the + * %NL80211_CMD_REGISTER_FRAME command, see the description there. + * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated + * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with + * an %NL80211_ATTR_WIPHY_FREQ_OFFSET. + * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the + * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1. + * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies + * + * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from + * association request when used with NL80211_CMD_NEW_STATION). + * + * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS + * discovery. It is a nested attribute, see + * &enum nl80211_fils_discovery_attributes. + * + * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure + * unsolicited broadcast probe response. It is a nested attribute, see + * &enum nl80211_unsol_bcast_probe_resp_attributes. + * + * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element + * override mask. Used with NL80211_ATTR_S1G_CAPABILITY in + * NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT. + * + * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE + * derivation in WPA3-Personal networks which are using SAE authentication. + * This is a u8 attribute that encapsulates one of the values from + * &enum nl80211_sae_pwe_mechanism. + * + * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when + * used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields + * of %nl80211_sar_attrs which specifies the sar type and related + * sar specs. Sar specs contains array of %nl80211_sar_specs_attrs. + * + * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and + * disassoc events to indicate that an immediate reconnect to the AP + * is desired. + * + * @NL80211_ATTR_OBSS_COLOR_BITMAP: bitmap of the u64 BSS colors for the + * %NL80211_CMD_OBSS_COLOR_COLLISION event. + * + * @NL80211_ATTR_COLOR_CHANGE_COUNT: u8 attribute specifying the number of TBTT's + * until the color switch event. + * @NL80211_ATTR_COLOR_CHANGE_COLOR: u8 attribute specifying the color that we are + * switching to + * @NL80211_ATTR_COLOR_CHANGE_ELEMS: Nested set of attributes containing the IE + * information for the time while performing a color switch. * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined @@ -2048,7 +2851,7 @@ enum nl80211_attrs { NL80211_ATTR_CONN_FAILED_REASON, - NL80211_ATTR_SAE_DATA, + NL80211_ATTR_AUTH_DATA, NL80211_ATTR_VHT_CAPABILITY, @@ -2096,8 +2899,8 @@ enum nl80211_attrs { NL80211_ATTR_CH_SWITCH_COUNT, NL80211_ATTR_CH_SWITCH_BLOCK_TX, NL80211_ATTR_CSA_IES, - NL80211_ATTR_CSA_C_OFF_BEACON, - NL80211_ATTR_CSA_C_OFF_PRESP, + NL80211_ATTR_CNTDWN_OFFS_BEACON, + NL80211_ATTR_CNTDWN_OFFS_PRESP, NL80211_ATTR_RXMGMT_FLAGS, @@ -2164,6 +2967,135 @@ enum nl80211_attrs { NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS, NL80211_ATTR_SCHED_SCAN_PLANS, + NL80211_ATTR_PBSS, + + NL80211_ATTR_BSS_SELECT, + + NL80211_ATTR_STA_SUPPORT_P2P_PS, + + NL80211_ATTR_PAD, + + NL80211_ATTR_IFTYPE_EXT_CAPA, + + NL80211_ATTR_MU_MIMO_GROUP_DATA, + NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR, + + NL80211_ATTR_SCAN_START_TIME_TSF, + NL80211_ATTR_SCAN_START_TIME_TSF_BSSID, + NL80211_ATTR_MEASUREMENT_DURATION, + NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY, + + NL80211_ATTR_MESH_PEER_AID, + + NL80211_ATTR_NAN_MASTER_PREF, + NL80211_ATTR_BANDS, + NL80211_ATTR_NAN_FUNC, + NL80211_ATTR_NAN_MATCH, + + NL80211_ATTR_FILS_KEK, + NL80211_ATTR_FILS_NONCES, + + NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED, + + NL80211_ATTR_BSSID, + + NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI, + NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST, + + NL80211_ATTR_TIMEOUT_REASON, + + NL80211_ATTR_FILS_ERP_USERNAME, + NL80211_ATTR_FILS_ERP_REALM, + NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM, + NL80211_ATTR_FILS_ERP_RRK, + NL80211_ATTR_FILS_CACHE_ID, + + NL80211_ATTR_PMK, + + NL80211_ATTR_SCHED_SCAN_MULTI, + NL80211_ATTR_SCHED_SCAN_MAX_REQS, + + NL80211_ATTR_WANT_1X_4WAY_HS, + NL80211_ATTR_PMKR0_NAME, + NL80211_ATTR_PORT_AUTHORIZED, + + NL80211_ATTR_EXTERNAL_AUTH_ACTION, + NL80211_ATTR_EXTERNAL_AUTH_SUPPORT, + + NL80211_ATTR_NSS, + NL80211_ATTR_ACK_SIGNAL, + + NL80211_ATTR_CONTROL_PORT_OVER_NL80211, + + NL80211_ATTR_TXQ_STATS, + NL80211_ATTR_TXQ_LIMIT, + NL80211_ATTR_TXQ_MEMORY_LIMIT, + NL80211_ATTR_TXQ_QUANTUM, + + NL80211_ATTR_HE_CAPABILITY, + + NL80211_ATTR_FTM_RESPONDER, + + NL80211_ATTR_FTM_RESPONDER_STATS, + + NL80211_ATTR_TIMEOUT, + + NL80211_ATTR_PEER_MEASUREMENTS, + + NL80211_ATTR_AIRTIME_WEIGHT, + NL80211_ATTR_STA_TX_POWER_SETTING, + NL80211_ATTR_STA_TX_POWER, + + NL80211_ATTR_SAE_PASSWORD, + + NL80211_ATTR_TWT_RESPONDER, + + NL80211_ATTR_HE_OBSS_PD, + + NL80211_ATTR_WIPHY_EDMG_CHANNELS, + NL80211_ATTR_WIPHY_EDMG_BW_CONFIG, + + NL80211_ATTR_VLAN_ID, + + NL80211_ATTR_HE_BSS_COLOR, + + NL80211_ATTR_IFTYPE_AKM_SUITES, + + NL80211_ATTR_TID_CONFIG, + + NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, + + NL80211_ATTR_PMK_LIFETIME, + NL80211_ATTR_PMK_REAUTH_THRESHOLD, + + NL80211_ATTR_RECEIVE_MULTICAST, + NL80211_ATTR_WIPHY_FREQ_OFFSET, + NL80211_ATTR_CENTER_FREQ1_OFFSET, + NL80211_ATTR_SCAN_FREQ_KHZ, + + NL80211_ATTR_HE_6GHZ_CAPABILITY, + + NL80211_ATTR_FILS_DISCOVERY, + + NL80211_ATTR_UNSOL_BCAST_PROBE_RESP, + + NL80211_ATTR_S1G_CAPABILITY, + NL80211_ATTR_S1G_CAPABILITY_MASK, + + NL80211_ATTR_SAE_PWE, + + NL80211_ATTR_RECONNECT_REQUESTED, + + NL80211_ATTR_SAR_SPEC, + + NL80211_ATTR_DISABLE_HE, + + NL80211_ATTR_OBSS_COLOR_BITMAP, + + NL80211_ATTR_COLOR_CHANGE_COUNT, + NL80211_ATTR_COLOR_CHANGE_COLOR, + NL80211_ATTR_COLOR_CHANGE_ELEMS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2175,6 +3107,9 @@ enum nl80211_attrs { #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG #define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER +#define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA +#define NL80211_ATTR_CSA_C_OFF_BEACON NL80211_ATTR_CNTDWN_OFFS_BEACON +#define NL80211_ATTR_CSA_C_OFF_PRESP NL80211_ATTR_CNTDWN_OFFS_PRESP /* * Allow user space programs to use #ifdef on new attributes by defining them @@ -2202,15 +3137,18 @@ enum nl80211_attrs { #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS +#define NL80211_WIPHY_NAME_MAXLEN 64 + #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_HT_RATES 77 -#define NL80211_MAX_SUPP_REG_RULES 64 +#define NL80211_MAX_SUPP_REG_RULES 128 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 #define NL80211_HT_CAPABILITY_LEN 26 #define NL80211_VHT_CAPABILITY_LEN 12 - +#define NL80211_HE_MIN_CAPABILITY_LEN 16 +#define NL80211_HE_MAX_CAPABILITY_LEN 54 #define NL80211_MAX_NR_CIPHER_SUITES 5 #define NL80211_MAX_NR_AKM_SUITES 2 @@ -2242,6 +3180,7 @@ enum nl80211_attrs { * commands to create and destroy one * @NL80211_IF_TYPE_OCB: Outside Context of a BSS * This mode corresponds to the MIB variable dot11OCBActivated=true + * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev) * @NL80211_IFTYPE_MAX: highest interface type number currently defined * @NUM_NL80211_IFTYPES: number of defined interface types * @@ -2262,6 +3201,7 @@ enum nl80211_iftype { NL80211_IFTYPE_P2P_GO, NL80211_IFTYPE_P2P_DEVICE, NL80211_IFTYPE_OCB, + NL80211_IFTYPE_NAN, /* keep last */ NUM_NL80211_IFTYPES, @@ -2307,6 +3247,20 @@ enum nl80211_sta_flags { NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 }; +/** + * enum nl80211_sta_p2p_ps_status - station support of P2P PS + * + * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism + * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism + * @NUM_NL80211_P2P_PS_STATUS: number of values + */ +enum nl80211_sta_p2p_ps_status { + NL80211_P2P_PS_UNSUPPORTED = 0, + NL80211_P2P_PS_SUPPORTED, + + NUM_NL80211_P2P_PS_STATUS, +}; + #define NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER /** @@ -2321,6 +3275,50 @@ struct nl80211_sta_flag_update { __u32 set; } __attribute__((packed)); +/** + * enum nl80211_he_gi - HE guard interval + * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec + * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec + * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec + */ +enum nl80211_he_gi { + NL80211_RATE_INFO_HE_GI_0_8, + NL80211_RATE_INFO_HE_GI_1_6, + NL80211_RATE_INFO_HE_GI_3_2, +}; + +/** + * enum nl80211_he_ltf - HE long training field + * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec + * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec + * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec + */ +enum nl80211_he_ltf { + NL80211_RATE_INFO_HE_1XLTF, + NL80211_RATE_INFO_HE_2XLTF, + NL80211_RATE_INFO_HE_4XLTF, +}; + +/** + * enum nl80211_he_ru_alloc - HE RU allocation values + * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation + */ +enum nl80211_he_ru_alloc { + NL80211_RATE_INFO_HE_RU_ALLOC_26, + NL80211_RATE_INFO_HE_RU_ALLOC_52, + NL80211_RATE_INFO_HE_RU_ALLOC_106, + NL80211_RATE_INFO_HE_RU_ALLOC_242, + NL80211_RATE_INFO_HE_RU_ALLOC_484, + NL80211_RATE_INFO_HE_RU_ALLOC_996, + NL80211_RATE_INFO_HE_RU_ALLOC_2x996, +}; + /** * enum nl80211_rate_info - bitrate information * @@ -2476,6 +3474,27 @@ enum nl80211_sta_bss_param { * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames; * each one of those is again nested with &enum nl80211_tid_stats * attributes carrying the actual values. + * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames + * received from the station (u64, usec) + * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment + * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm) + * @NL80211_STA_INFO_ACK_SIGNAL_AVG: avg signal strength of ACK frames (s8, dBm) + * @NL80211_STA_INFO_RX_MPDUS: total number of received packets (MPDUs) + * (u32, from this station) + * @NL80211_STA_INFO_FCS_ERROR_COUNT: total number of packets (MPDUs) received + * with an FCS error (u32, from this station). This count may not include + * some packets with an FCS error due to TA corruption. Hence this counter + * might not be fully accurate. + * @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a + * mesh gate (u8, 0 or 1) + * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames + * sent to the station (u64, usec) + * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16) + * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station + * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds) + * of STA's association + * @NL80211_STA_INFO_CONNECTED_TO_AS: set to true if STA has a path to a + * authentication server (u8, 0 or 1) * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -2512,12 +3531,28 @@ enum nl80211_sta_info { NL80211_STA_INFO_BEACON_RX, NL80211_STA_INFO_BEACON_SIGNAL_AVG, NL80211_STA_INFO_TID_STATS, + NL80211_STA_INFO_RX_DURATION, + NL80211_STA_INFO_PAD, + NL80211_STA_INFO_ACK_SIGNAL, + NL80211_STA_INFO_ACK_SIGNAL_AVG, + NL80211_STA_INFO_RX_MPDUS, + NL80211_STA_INFO_FCS_ERROR_COUNT, + NL80211_STA_INFO_CONNECTED_TO_GATE, + NL80211_STA_INFO_TX_DURATION, + NL80211_STA_INFO_AIRTIME_WEIGHT, + NL80211_STA_INFO_AIRTIME_LINK_METRIC, + NL80211_STA_INFO_ASSOC_AT_BOOTTIME, + NL80211_STA_INFO_CONNECTED_TO_AS, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 }; +/* we renamed this - stay compatible */ +#define NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG NL80211_STA_INFO_ACK_SIGNAL_AVG + + /** * enum nl80211_tid_stats - per TID statistics attributes * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved @@ -2528,6 +3563,8 @@ enum nl80211_sta_info { * transmitted MSDUs (not counting the first attempt; u64) * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted * MSDUs (u64) + * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment + * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute) * @NUM_NL80211_TID_STATS: number of attributes here * @NL80211_TID_STATS_MAX: highest numbered attribute here */ @@ -2537,12 +3574,52 @@ enum nl80211_tid_stats { NL80211_TID_STATS_TX_MSDU, NL80211_TID_STATS_TX_MSDU_RETRIES, NL80211_TID_STATS_TX_MSDU_FAILED, + NL80211_TID_STATS_PAD, + NL80211_TID_STATS_TXQ_STATS, /* keep last */ NUM_NL80211_TID_STATS, NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1 }; +/** + * enum nl80211_txq_stats - per TXQ statistics attributes + * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved + * @NUM_NL80211_TXQ_STATS: number of attributes here + * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged + * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently + * backlogged + * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen + * @NL80211_TXQ_STATS_DROPS: total number of packet drops + * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks + * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow + * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow + * (only for per-phy stats) + * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions + * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ + * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ + * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY + * @NL80211_TXQ_STATS_MAX: highest numbered attribute here + */ +enum nl80211_txq_stats { + __NL80211_TXQ_STATS_INVALID, + NL80211_TXQ_STATS_BACKLOG_BYTES, + NL80211_TXQ_STATS_BACKLOG_PACKETS, + NL80211_TXQ_STATS_FLOWS, + NL80211_TXQ_STATS_DROPS, + NL80211_TXQ_STATS_ECN_MARKS, + NL80211_TXQ_STATS_OVERLIMIT, + NL80211_TXQ_STATS_OVERMEMORY, + NL80211_TXQ_STATS_COLLISIONS, + NL80211_TXQ_STATS_TX_BYTES, + NL80211_TXQ_STATS_TX_PACKETS, + NL80211_TXQ_STATS_MAX_FLOWS, + + /* keep last */ + NUM_NL80211_TXQ_STATS, + NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1 +}; + /** * enum nl80211_mpath_flags - nl80211 mesh path flags * @@ -2575,8 +3652,10 @@ enum nl80211_mpath_flags { * &enum nl80211_mpath_flags; * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries + * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination + * @NL80211_MPATH_INFO_PATH_CHANGE: total number of path changes to destination * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number - * currently defind + * currently defined * @__NL80211_MPATH_INFO_AFTER_LAST: internal use */ enum nl80211_mpath_info { @@ -2588,6 +3667,8 @@ enum nl80211_mpath_info { NL80211_MPATH_INFO_FLAGS, NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, NL80211_MPATH_INFO_DISCOVERY_RETRIES, + NL80211_MPATH_INFO_HOP_COUNT, + NL80211_MPATH_INFO_PATH_CHANGE, /* keep last */ __NL80211_MPATH_INFO_AFTER_LAST, @@ -2612,6 +3693,8 @@ enum nl80211_mpath_info { * defined * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16), * given for all 6 GHz band channels + * @NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS: vendor element capabilities that are + * advertised on this band/for this iftype (binary) * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use */ enum nl80211_band_iftype_attr { @@ -2623,6 +3706,7 @@ enum nl80211_band_iftype_attr { NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA, + NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS, /* keep last */ __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, @@ -2646,6 +3730,12 @@ enum nl80211_band_iftype_attr { * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using * attributes from &enum nl80211_band_iftype_attr + * @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz + * channel(s) that are allowed to be used for EDMG transmissions. + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. + * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes + * the allowed channel bandwidth configurations. + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined * @__NL80211_BAND_ATTR_AFTER_LAST: internal use */ @@ -2663,6 +3753,9 @@ enum nl80211_band_attr { NL80211_BAND_ATTR_VHT_CAPA, NL80211_BAND_ATTR_IFTYPE_DATA, + NL80211_BAND_ATTR_EDMG_CHANNELS, + NL80211_BAND_ATTR_EDMG_BW_CONFIG, + /* keep last */ __NL80211_BAND_ATTR_AFTER_LAST, NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 @@ -2670,6 +3763,29 @@ enum nl80211_band_attr { #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA +/** + * enum nl80211_wmm_rule - regulatory wmm rule + * + * @__NL80211_WMMR_INVALID: attribute number 0 is reserved + * @NL80211_WMMR_CW_MIN: Minimum contention window slot. + * @NL80211_WMMR_CW_MAX: Maximum contention window slot. + * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space. + * @NL80211_WMMR_TXOP: Maximum allowed tx operation time. + * @nl80211_WMMR_MAX: highest possible wmm rule. + * @__NL80211_WMMR_LAST: Internal use. + */ +enum nl80211_wmm_rule { + __NL80211_WMMR_INVALID, + NL80211_WMMR_CW_MIN, + NL80211_WMMR_CW_MAX, + NL80211_WMMR_AIFSN, + NL80211_WMMR_TXOP, + + /* keep last */ + __NL80211_WMMR_LAST, + NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1 +}; + /** * enum nl80211_frequency_attr - frequency attributes * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved @@ -2719,6 +3835,22 @@ enum nl80211_band_attr { * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations. + * This is a nested attribute that contains the wmm limitation per AC. + * (see &enum nl80211_wmm_rule) + * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel + * in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz + * @NL80211_FREQUENCY_ATTR_1MHZ: 1 MHz operation is allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_2MHZ: 2 MHz operation is allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_4MHZ: 4 MHz operation is allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_8MHZ: 8 MHz operation is allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed + * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -2747,6 +3879,14 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_IR_CONCURRENT, NL80211_FREQUENCY_ATTR_NO_20MHZ, NL80211_FREQUENCY_ATTR_NO_10MHZ, + NL80211_FREQUENCY_ATTR_WMM, + NL80211_FREQUENCY_ATTR_NO_HE, + NL80211_FREQUENCY_ATTR_OFFSET, + NL80211_FREQUENCY_ATTR_1MHZ, + NL80211_FREQUENCY_ATTR_2MHZ, + NL80211_FREQUENCY_ATTR_4MHZ, + NL80211_FREQUENCY_ATTR_8MHZ, + NL80211_FREQUENCY_ATTR_16MHZ, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -2874,6 +4014,7 @@ enum nl80211_reg_rule_attr { * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, * only report BSS with matching SSID. + * (This cannot be used together with BSSID.) * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a * BSS in scan results. Filtering is turned off if not specified. Note that * if this attribute is in a match set of its own, then it is treated as @@ -2882,6 +4023,23 @@ enum nl80211_reg_rule_attr { * how this API was implemented in the past. Also, due to the same problem, * the only way to create a matchset with only an RSSI filter (with this * attribute) is if there's only a single matchset with the RSSI attribute. + * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether + * %NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or + * relative to current bss's RSSI. + * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for + * BSS-es in the specified band is to be adjusted before doing + * RSSI-based BSS selection. The attribute value is a packed structure + * value as specified by &struct nl80211_bss_select_rssi_adjust. + * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching + * (this cannot be used together with SSID). + * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the + * band specific minimum rssi thresholds for the bands defined in + * enum nl80211_band. The minimum rssi threshold value(s32) specific to a + * band shall be encapsulated in attribute with type value equals to one + * of the NL80211_BAND_* defined in enum nl80211_band. For example, the + * minimum rssi threshold value for 2.4GHZ band shall be encapsulated + * within an attribute of type NL80211_BAND_2GHZ. And one or more of such + * attributes will be nested within this attribute. * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * attribute number currently defined * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use @@ -2891,6 +4049,10 @@ enum nl80211_sched_scan_match_attr { NL80211_SCHED_SCAN_MATCH_ATTR_SSID, NL80211_SCHED_SCAN_MATCH_ATTR_RSSI, + NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI, + NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST, + NL80211_SCHED_SCAN_MATCH_ATTR_BSSID, + NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, /* keep last */ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, @@ -2917,11 +4079,12 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated * base on contiguous rules and wider channels will be allowed to cross * multiple contiguous/overlapping frequency ranges. - * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT + * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed + * @NL80211_RRF_NO_HE: HE operation not allowed */ enum nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1<<0, @@ -2939,6 +4102,7 @@ enum nl80211_reg_rule_flags { NL80211_RRF_NO_HT40PLUS = 1<<14, NL80211_RRF_NO_80MHZ = 1<<15, NL80211_RRF_NO_160MHZ = 1<<16, + NL80211_RRF_NO_HE = 1<<17, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR @@ -3011,8 +4175,12 @@ enum nl80211_user_reg_hint_type { * transmitting data (on channel or globally) * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan * (on this channel or globally) + * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment + * @NL80211_SURVEY_INFO_TIME_BSS_RX: amount of time the radio spent + * receiving frames destined to the local BSS * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number * currently defined + * @NL80211_SURVEY_INFO_FREQUENCY_OFFSET: center frequency offset in KHz * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use */ enum nl80211_survey_info { @@ -3026,6 +4194,9 @@ enum nl80211_survey_info { NL80211_SURVEY_INFO_TIME_RX, NL80211_SURVEY_INFO_TIME_TX, NL80211_SURVEY_INFO_TIME_SCAN, + NL80211_SURVEY_INFO_PAD, + NL80211_SURVEY_INFO_TIME_BSS_RX, + NL80211_SURVEY_INFO_FREQUENCY_OFFSET, /* keep last */ __NL80211_SURVEY_INFO_AFTER_LAST, @@ -3206,6 +4377,21 @@ enum nl80211_mesh_power_mode { * remove it from the STA's list of peers. You may set this to 0 to disable * the removal of the STA. Default is 30 minutes. * + * @NL80211_MESHCONF_CONNECTED_TO_GATE: If set to true then this mesh STA + * will advertise that it is connected to a gate in the mesh formation + * field. If left unset then the mesh formation field will only + * advertise such if there is an active root mesh path. + * + * @NL80211_MESHCONF_NOLEARN: Try to avoid multi-hop path discovery (e.g. + * PREQ/PREP for HWMP) if the destination is a direct neighbor. Note that + * this might not be the optimal decision as a multi-hop route might be + * better. So if using this setting you will likely also want to disable + * dot11MeshForwarding and use another mesh routing protocol on top. + * + * @NL80211_MESHCONF_CONNECTED_TO_AS: If set to true then this mesh STA + * will advertise that it is connected to a authentication server + * in the mesh formation field. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -3238,6 +4424,9 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_POWER_MODE, NL80211_MESHCONF_AWAKE_WINDOW, NL80211_MESHCONF_PLINK_TIMEOUT, + NL80211_MESHCONF_CONNECTED_TO_GATE, + NL80211_MESHCONF_NOLEARN, + NL80211_MESHCONF_CONNECTED_TO_AS, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, @@ -3367,6 +4556,27 @@ enum nl80211_channel_type { NL80211_CHAN_HT40PLUS }; +/** + * enum nl80211_key_mode - Key mode + * + * @NL80211_KEY_RX_TX: (Default) + * Key can be used for Rx and Tx immediately + * + * The following modes can only be selected for unicast keys and when the + * driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID: + * + * @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY: + * Unicast key can only be used for Rx, Tx not allowed, yet + * @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY: + * The unicast key identified by idx and mac is cleared for Tx and becomes + * the preferred Tx key for the station. + */ +enum nl80211_key_mode { + NL80211_KEY_RX_TX, + NL80211_KEY_NO_TX, + NL80211_KEY_SET_TX +}; + /** * enum nl80211_chan_width - channel width definitions * @@ -3385,6 +4595,11 @@ enum nl80211_channel_type { * attribute must be provided as well * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel + * @NL80211_CHAN_WIDTH_1: 1 MHz OFDM channel + * @NL80211_CHAN_WIDTH_2: 2 MHz OFDM channel + * @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel + * @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel + * @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel */ enum nl80211_chan_width { NL80211_CHAN_WIDTH_20_NOHT, @@ -3395,6 +4610,11 @@ enum nl80211_chan_width { NL80211_CHAN_WIDTH_160, NL80211_CHAN_WIDTH_5, NL80211_CHAN_WIDTH_10, + NL80211_CHAN_WIDTH_1, + NL80211_CHAN_WIDTH_2, + NL80211_CHAN_WIDTH_4, + NL80211_CHAN_WIDTH_8, + NL80211_CHAN_WIDTH_16, }; /** @@ -3405,11 +4625,15 @@ enum nl80211_chan_width { * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide + * @NL80211_BSS_CHAN_WIDTH_1: control channel is 1 MHz wide + * @NL80211_BSS_CHAN_WIDTH_2: control channel is 2 MHz wide */ enum nl80211_bss_scan_width { NL80211_BSS_CHAN_WIDTH_20, NL80211_BSS_CHAN_WIDTH_10, NL80211_BSS_CHAN_WIDTH_5, + NL80211_BSS_CHAN_WIDTH_1, + NL80211_BSS_CHAN_WIDTH_2, }; /** @@ -3451,6 +4675,17 @@ enum nl80211_bss_scan_width { * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry * was last updated by a received frame. The value is expected to be * accurate to about 10ms. (u64, nanoseconds) + * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment + * @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first + * octet of the timestamp field of the last beacon/probe received for + * this BSS. The time is the TSF of the BSS specified by + * @NL80211_BSS_PARENT_BSSID. (u64). + * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF + * is set. + * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update. + * Contains a nested array of signal strength attributes (u8, dBm), + * using the nesting index as the antenna number. + * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -3471,6 +4706,11 @@ enum nl80211_bss { NL80211_BSS_BEACON_TSF, NL80211_BSS_PRESP_DATA, NL80211_BSS_LAST_SEEN_BOOTTIME, + NL80211_BSS_PAD, + NL80211_BSS_PARENT_TSF, + NL80211_BSS_PARENT_BSSID, + NL80211_BSS_CHAIN_SIGNAL, + NL80211_BSS_FREQUENCY_OFFSET, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -3503,6 +4743,9 @@ enum nl80211_bss_status { * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals + * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key + * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS + * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key * @__NL80211_AUTHTYPE_NUM: internal * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by @@ -3515,6 +4758,9 @@ enum nl80211_auth_type { NL80211_AUTHTYPE_FT, NL80211_AUTHTYPE_NETWORK_EAP, NL80211_AUTHTYPE_SAE, + NL80211_AUTHTYPE_FILS_SK, + NL80211_AUTHTYPE_FILS_SK_PFS, + NL80211_AUTHTYPE_FILS_PK, /* keep last */ __NL80211_AUTHTYPE_NUM, @@ -3541,15 +4787,18 @@ enum nl80211_key_type { * enum nl80211_mfp - Management frame protection state * @NL80211_MFP_NO: Management frame protection not used * @NL80211_MFP_REQUIRED: Management frame protection required + * @NL80211_MFP_OPTIONAL: Management frame protection is optional */ enum nl80211_mfp { NL80211_MFP_NO, NL80211_MFP_REQUIRED, + NL80211_MFP_OPTIONAL, }; enum nl80211_wpa_versions { NL80211_WPA_VERSION_1 = 1 << 0, NL80211_WPA_VERSION_2 = 1 << 1, + NL80211_WPA_VERSION_3 = 1 << 2, }; /** @@ -3588,6 +4837,10 @@ enum nl80211_key_default_types { * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags * attributes, specifying what a key should be set as default as. * See &enum nl80211_key_default_types. + * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. + * Defaults to @NL80211_KEY_RX_TX. + * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key + * * @__NL80211_KEY_AFTER_LAST: internal * @NL80211_KEY_MAX: highest key attribute */ @@ -3601,6 +4854,8 @@ enum nl80211_key_attributes { NL80211_KEY_DEFAULT_MGMT, NL80211_KEY_TYPE, NL80211_KEY_DEFAULT_TYPES, + NL80211_KEY_MODE, + NL80211_KEY_DEFAULT_BEACON, /* keep last */ __NL80211_KEY_AFTER_LAST, @@ -3619,6 +4874,10 @@ enum nl80211_key_attributes { * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection, * see &struct nl80211_txrate_vht * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi + * @NL80211_TXRATE_HE: HE rates allowed for TX rate selection, + * see &struct nl80211_txrate_he + * @NL80211_TXRATE_HE_GI: configure HE GI, 0.8us, 1.6us and 3.2us. + * @NL80211_TXRATE_HE_LTF: configure HE LTF, 1XLTF, 2XLTF and 4XLTF. * @__NL80211_TXRATE_AFTER_LAST: internal * @NL80211_TXRATE_MAX: highest TX rate attribute */ @@ -3628,6 +4887,9 @@ enum nl80211_tx_rate_attributes { NL80211_TXRATE_HT, NL80211_TXRATE_VHT, NL80211_TXRATE_GI, + NL80211_TXRATE_HE, + NL80211_TXRATE_HE_GI, + NL80211_TXRATE_HE_LTF, /* keep last */ __NL80211_TXRATE_AFTER_LAST, @@ -3645,6 +4907,15 @@ struct nl80211_txrate_vht { __u16 mcs[NL80211_VHT_NSS_MAX]; }; +#define NL80211_HE_NSS_MAX 8 +/** + * struct nl80211_txrate_he - HE MCS/NSS txrate bitmap + * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) + */ +struct nl80211_txrate_he { + __u16 mcs[NL80211_HE_NSS_MAX]; +}; + enum nl80211_txrate_gi { NL80211_TXRATE_DEFAULT_GI, NL80211_TXRATE_FORCE_SGI, @@ -3655,12 +4926,20 @@ enum nl80211_txrate_gi { * enum nl80211_band - Frequency band * @NL80211_BAND_2GHZ: 2.4 GHz ISM band * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) - * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz) + * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz) + * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz) + * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs + * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace + * since newer kernel versions may support more bands */ enum nl80211_band { NL80211_BAND_2GHZ, NL80211_BAND_5GHZ, NL80211_BAND_60GHZ, + NL80211_BAND_6GHZ, + NL80211_BAND_S1GHZ, + + NUM_NL80211_BANDS, }; /** @@ -3678,7 +4957,10 @@ enum nl80211_ps_state { * @__NL80211_ATTR_CQM_INVALID: invalid * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies * the threshold for the RSSI level at which an event will be sent. Zero - * to disable. + * to disable. Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is + * set, multiple values can be supplied as a low-to-high sorted array of + * threshold values in dBm. Events will be sent when the RSSI value + * crosses any of the thresholds. * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies * the minimum amount the RSSI level must change after an event before a * new event may be issued (to reduce effects of RSSI oscillation). @@ -3698,6 +4980,8 @@ enum nl80211_ps_state { * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting. * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon * loss event + * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the + * RSSI threshold event. * @__NL80211_ATTR_CQM_AFTER_LAST: internal * @NL80211_ATTR_CQM_MAX: highest key attribute */ @@ -3711,6 +4995,7 @@ enum nl80211_attr_cqm { NL80211_ATTR_CQM_TXE_PKTS, NL80211_ATTR_CQM_TXE_INTVL, NL80211_ATTR_CQM_BEACON_LOSS_EVENT, + NL80211_ATTR_CQM_RSSI_LEVEL, /* keep last */ __NL80211_ATTR_CQM_AFTER_LAST, @@ -3744,6 +5029,92 @@ enum nl80211_tx_power_setting { NL80211_TX_POWER_FIXED, }; +/** + * enum nl80211_tid_config - TID config state + * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID + * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID + */ +enum nl80211_tid_config { + NL80211_TID_CONFIG_ENABLE, + NL80211_TID_CONFIG_DISABLE, +}; + +/* enum nl80211_tx_rate_setting - TX rate configuration type + * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate + * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter + * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter + */ +enum nl80211_tx_rate_setting { + NL80211_TX_RATE_AUTOMATIC, + NL80211_TX_RATE_LIMITED, + NL80211_TX_RATE_FIXED, +}; + +/* enum nl80211_tid_config_attr - TID specific configuration. + * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values + * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported + * for per-vif configuration; doesn't list the ones that are generic + * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE). + * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but + * per peer instead. + * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates + * that the new configuration overrides all previous peer + * configurations, otherwise previous peer specific configurations + * should be left untouched. + * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7) + * Its type is u16. + * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID. + * specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config. + * Its type is u8. + * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame + * transmission, user-space sets this configuration in + * &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and + * the max value is advertised by the driver in this attribute on + * output in wiphy capabilities. + * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame + * transmission, user-space sets this configuration in + * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and + * the max value is advertised by the driver in this attribute on + * output in wiphy capabilities. + * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation + * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. + * Its type is u8, using the values from &nl80211_tid_config. + * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs + * specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using + * the values from &nl80211_tid_config. + * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation + * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. + * Its type is u8, using the values from &nl80211_tid_config. + * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful + * to notfiy the driver that what type of txrate should be used + * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using + * the values form &nl80211_tx_rate_setting. + * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied + * with the parameters passed through %NL80211_ATTR_TX_RATES. + * configuration is applied to the data frame for the tid to that connected + * station. + */ +enum nl80211_tid_config_attr { + __NL80211_TID_CONFIG_ATTR_INVALID, + NL80211_TID_CONFIG_ATTR_PAD, + NL80211_TID_CONFIG_ATTR_VIF_SUPP, + NL80211_TID_CONFIG_ATTR_PEER_SUPP, + NL80211_TID_CONFIG_ATTR_OVERRIDE, + NL80211_TID_CONFIG_ATTR_TIDS, + NL80211_TID_CONFIG_ATTR_NOACK, + NL80211_TID_CONFIG_ATTR_RETRY_SHORT, + NL80211_TID_CONFIG_ATTR_RETRY_LONG, + NL80211_TID_CONFIG_ATTR_AMPDU_CTRL, + NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL, + NL80211_TID_CONFIG_ATTR_AMSDU_CTRL, + NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE, + NL80211_TID_CONFIG_ATTR_TX_RATE, + + /* keep last */ + __NL80211_TID_CONFIG_ATTR_AFTER_LAST, + NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1 +}; + /** * enum nl80211_packet_pattern_attr - packet pattern attribute * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute @@ -4119,6 +5490,9 @@ enum nl80211_iface_limit_attrs { * of supported channel widths for radar detection. * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap * of supported regulatory regions for radar detection. + * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of + * different beacon intervals supported by all the interface combinations + * in this group (if not present, all beacon intervals be identical). * @NUM_NL80211_IFACE_COMB: number of attributes * @MAX_NL80211_IFACE_COMB: highest attribute number * @@ -4126,8 +5500,8 @@ enum nl80211_iface_limit_attrs { * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2 * => allows an AP and a STA that must match BIs * - * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8 - * => allows 8 of AP/GO + * numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8, + * => allows 8 of AP/GO that can have BI gcd >= min gcd * * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 * => allows two STAs on different channels @@ -4135,7 +5509,7 @@ enum nl80211_iface_limit_attrs { * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 * => allows a STA plus three P2P interfaces * - * The list of these four possiblities could completely be contained + * The list of these four possibilities could completely be contained * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate * that any of these groups must match. * @@ -4153,6 +5527,7 @@ enum nl80211_if_combination_attrs { NL80211_IFACE_COMB_NUM_CHANNELS, NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, NL80211_IFACE_COMB_RADAR_DETECT_REGIONS, + NL80211_IFACE_COMB_BI_MIN_GCD, /* keep last */ NUM_NL80211_IFACE_COMB, @@ -4164,7 +5539,7 @@ enum nl80211_if_combination_attrs { * enum nl80211_plink_state - state of a mesh peer link finite state machine * * @NL80211_PLINK_LISTEN: initial state, considered the implicit - * state of non existant mesh peer links + * state of non existent mesh peer links * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to * this mesh peer * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received @@ -4211,6 +5586,8 @@ enum plink_actions { #define NL80211_KCK_LEN 16 #define NL80211_KEK_LEN 16 +#define NL80211_KCK_EXT_LEN 24 +#define NL80211_KEK_EXT_LEN 32 #define NL80211_REPLAY_CTR_LEN 8 /** @@ -4219,6 +5596,7 @@ enum plink_actions { * @NL80211_REKEY_DATA_KEK: key encryption key (binary) * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) + * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type) * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) */ @@ -4227,6 +5605,7 @@ enum nl80211_rekey_data { NL80211_REKEY_DATA_KEK, NL80211_REKEY_DATA_KCK, NL80211_REKEY_DATA_REPLAY_CTR, + NL80211_REKEY_DATA_AKM, /* keep last */ NUM_NL80211_REKEY_DATA, @@ -4440,18 +5819,247 @@ enum nl80211_feature_flags { NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28, NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29, NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30, - NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1 << 31, + NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1U << 31, }; /** * enum nl80211_ext_feature_index - bit index of extended features. * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates. + * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can + * request to use RRM (see %NL80211_ATTR_USE_RRM) with + * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set + * the ASSOC_REQ_USE_RRM flag in the association request even if + * NL80211_FEATURE_QUIET is not advertized. + * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air + * sniffer which means that it can be configured to hear packets from + * certain groups which can be configured by the + * %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute, + * or can be configured to follow a station by configuring the + * %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute. + * @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual + * time the scan started in scan results event. The time is the TSF of + * the BSS that the interface that requested the scan is connected to + * (if available). + * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the + * time the last beacon/probe was received. The time is the TSF of the + * BSS that the interface that requested the scan is connected to + * (if available). + * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of + * channel dwell time. + * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate + * configuration (AP/mesh), supporting a legacy (non HT/VHT) rate. + * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate + * configuration (AP/mesh) with HT rates. + * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate + * configuration (AP/mesh) with VHT rates. + * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup + * with user space SME (NL80211_CMD_AUTHENTICATE) in station mode. + * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA + * in @NL80211_CMD_FRAME while not associated. + * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports + * randomized TA in @NL80211_CMD_FRAME while associated. + * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan + * for reporting BSSs with better RSSI than the current connected BSS + * (%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI). + * @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the + * %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more + * RSSI threshold values to monitor rather than exactly one threshold. + * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key + * authentication with %NL80211_CMD_CONNECT. + * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way + * handshake with PSK in station mode (PSK is passed as part of the connect + * and associate commands), doing it in the host might not be supported. + * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way + * handshake with 802.1X in station mode (will pass EAP frames to the host + * and accept the set_pmk/del_pmk commands), doing it in the host might not + * be supported. + * @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding + * the max channel attribute in the FILS request params IE with the + * actual dwell time. + * @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe + * response + * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending + * the first probe request in each channel at rate of at least 5.5Mbps. + * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports + * probe request tx deferral and suppression + * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL + * value in %NL80211_ATTR_USE_MFP. + * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan. + * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan. + * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan. + * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions. + * Device or driver will do all DFS-related actions by itself, + * informing user-space about CAC progress, radar detection event, + * channel change triggered by radar detection event. + * No need to start CAC from user-space, no need to react to + * "radar detected" event. + * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and + * receiving control port frames over nl80211 instead of the netdevice. + * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports + * (average) ACK signal strength reporting. + * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate + * TXQs. + * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the + * SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN. + * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data + * except for supported rates from the probe request content if requested + * by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag. + * @NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER: Driver supports enabling fine + * timing measurement responder role. + * + * @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0: Driver/device confirm that they are + * able to rekey an in-use key correctly. Userspace must not rekey PTK keys + * if this flag is not set. Ignoring this can leak clear text packets and/or + * freeze the connection. + * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for + * Individually Addressed Frames" from IEEE802.11-2016. + * + * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime + * fairness for transmitted packets and has enabled airtime fairness + * scheduling. + * + * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching + * (set/del PMKSA operations) in AP mode. + * + * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports + * filtering of sched scan results using band specific RSSI thresholds. + * + * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power + * to a station. + * + * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in + * station mode (SAE password is passed as part of the connect command). + * + * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev + * with VLAN tagged frames and separate VLAN-specific netdevs added using + * vconfig similarly to the Ethernet case. + * + * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL) + * feature, which prevents bufferbloat by using the expected transmission + * time to limit the amount of data buffered in the hardware. + * + * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection + * and can receive key configuration for BIGTK using key indexes 6 and 7. + * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon + * protection as a client only and cannot transmit protected beacons. + * + * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the + * forwarding of preauth frames over the control port. They are then + * handled as ordinary data frames. + * + * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames + * + * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations + * in IBSS mode, essentially by dropping their state. + * + * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations + * are possible for multicast frames and those will be reported properly. + * + * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and + * reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to + * report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be + * included in the scan request. + * + * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver + * can report tx status for control port over nl80211 tx operations. + * + * @NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION: Driver supports Operating + * Channel Validation (OCV) when using driver's SME for RSNA handshakes. + * + * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK: Device wants to do 4-way + * handshake with PSK in AP mode (PSK is passed as part of the start AP + * command). + * + * @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP: Device wants to do SAE authentication + * in AP mode (SAE password is passed as part of the start AP command). + * + * @NL80211_EXT_FEATURE_FILS_DISCOVERY: Driver/device supports FILS discovery + * frames transmission + * + * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports + * unsolicited broadcast probe response transmission + * + * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate + * configuration (AP/mesh) with HE rates. + * + * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement + * exchange protocol. + * + * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement + * exchange protocol. + * + * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management + * frame protection for all management frames exchanged during the + * negotiation and range measurement procedure. + * + * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision + * detection and change announcemnts. * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_VHT_IBSS, + NL80211_EXT_FEATURE_RRM, + NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER, + NL80211_EXT_FEATURE_SCAN_START_TIME, + NL80211_EXT_FEATURE_BSS_PARENT_TSF, + NL80211_EXT_FEATURE_SET_SCAN_DWELL, + NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, + NL80211_EXT_FEATURE_BEACON_RATE_HT, + NL80211_EXT_FEATURE_BEACON_RATE_VHT, + NL80211_EXT_FEATURE_FILS_STA, + NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA, + NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED, + NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI, + NL80211_EXT_FEATURE_CQM_RSSI_LIST, + NL80211_EXT_FEATURE_FILS_SK_OFFLOAD, + NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK, + NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X, + NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME, + NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP, + NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE, + NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION, + NL80211_EXT_FEATURE_MFP_OPTIONAL, + NL80211_EXT_FEATURE_LOW_SPAN_SCAN, + NL80211_EXT_FEATURE_LOW_POWER_SCAN, + NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN, + NL80211_EXT_FEATURE_DFS_OFFLOAD, + NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211, + NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT, + /* we renamed this - stay compatible */ + NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT = NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT, + NL80211_EXT_FEATURE_TXQS, + NL80211_EXT_FEATURE_SCAN_RANDOM_SN, + NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT, + NL80211_EXT_FEATURE_CAN_REPLACE_PTK0, + NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER, + NL80211_EXT_FEATURE_AIRTIME_FAIRNESS, + NL80211_EXT_FEATURE_AP_PMKSA_CACHING, + NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, + NL80211_EXT_FEATURE_EXT_KEY_ID, + NL80211_EXT_FEATURE_STA_TX_PWR, + NL80211_EXT_FEATURE_SAE_OFFLOAD, + NL80211_EXT_FEATURE_VLAN_OFFLOAD, + NL80211_EXT_FEATURE_AQL, + NL80211_EXT_FEATURE_BEACON_PROTECTION, + NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH, + NL80211_EXT_FEATURE_PROTECTED_TWT, + NL80211_EXT_FEATURE_DEL_IBSS_STA, + NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS, + NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT, + NL80211_EXT_FEATURE_SCAN_FREQ_KHZ, + NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS, + NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION, + NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK, + NL80211_EXT_FEATURE_SAE_OFFLOAD_AP, + NL80211_EXT_FEATURE_FILS_DISCOVERY, + NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP, + NL80211_EXT_FEATURE_BEACON_RATE_HE, + NL80211_EXT_FEATURE_SECURE_LTF, + NL80211_EXT_FEATURE_SECURE_RTT, + NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE, + NL80211_EXT_FEATURE_BSS_COLOR, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -4490,6 +6098,21 @@ enum nl80211_connect_failed_reason { NL80211_CONN_FAIL_BLOCKED_CLIENT, }; +/** + * enum nl80211_timeout_reason - timeout reasons + * + * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified. + * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out. + * @NL80211_TIMEOUT_AUTH: Authentication timed out. + * @NL80211_TIMEOUT_ASSOC: Association timed out. + */ +enum nl80211_timeout_reason { + NL80211_TIMEOUT_UNSPECIFIED, + NL80211_TIMEOUT_SCAN, + NL80211_TIMEOUT_AUTH, + NL80211_TIMEOUT_ASSOC, +}; + /** * enum nl80211_scan_flags - scan request control flags * @@ -4497,6 +6120,10 @@ enum nl80211_connect_failed_reason { * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN * requests. * + * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and + * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only + * one of them can be used in the request. + * * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured @@ -4513,12 +6140,59 @@ enum nl80211_connect_failed_reason { * locally administered 1, multicast 0) is assumed. * This flag must not be requested when the feature isn't supported, check * the nl80211 feature flags for the device. + * @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS + * request parameters IE in the probe request + * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses + * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at + * rate of at least 5.5M. In case non OCE AP is discovered in the channel, + * only the first probe req in the channel will be sent in high rate. + * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request + * tx deferral (dot11FILSProbeDelay shall be set to 15ms) + * and suppression (if it has received a broadcast Probe Response frame, + * Beacon frame or FILS Discovery frame from an AP that the STA considers + * a suitable candidate for (re-)association - suitable in terms of + * SSID and/or RSSI. + * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to + * accomplish the scan. Thus, this flag intends the driver to perform the + * scan request with lesser span/duration. It is specific to the driver + * implementations on how this is accomplished. Scan accuracy may get + * impacted with this flag. + * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume + * optimal possible power. Drivers can resort to their specific means to + * optimize the power. Scan accuracy may get impacted with this flag. + * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan + * results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum + * possible scan results. This flag hints the driver to use the best + * possible scan configuration to improve the accuracy in scanning. + * Latency and power use may get impacted with this flag. + * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe + * request frames from this scan to avoid correlation/tracking being + * possible. + * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to + * only have supported rates and no additional capabilities (unless + * added by userspace explicitly.) + * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with + * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means + * %NL80211_ATTR_SCAN_FREQUENCIES will not be included. + * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for colocated APs reported by + * 2.4/5 GHz APs */ enum nl80211_scan_flags { - NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, - NL80211_SCAN_FLAG_FLUSH = 1<<1, - NL80211_SCAN_FLAG_AP = 1<<2, - NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3, + NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, + NL80211_SCAN_FLAG_FLUSH = 1<<1, + NL80211_SCAN_FLAG_AP = 1<<2, + NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3, + NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME = 1<<4, + NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP = 1<<5, + NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE = 1<<6, + NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION = 1<<7, + NL80211_SCAN_FLAG_LOW_SPAN = 1<<8, + NL80211_SCAN_FLAG_LOW_POWER = 1<<9, + NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10, + NL80211_SCAN_FLAG_RANDOM_SN = 1<<11, + NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12, + NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13, + NL80211_SCAN_FLAG_COLOCATED_6GHZ = 1<<14, }; /** @@ -4572,12 +6246,20 @@ enum nl80211_smps_mode { * change to the channel status. * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is * over, channel becomes usable. + * @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this + * non-operating channel is expired and no longer valid. New CAC must + * be done on this channel before starting the operation. This is not + * applicable for ETSI dfs domain where pre-CAC is valid for ever. + * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started, + * should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled. */ enum nl80211_radar_event { NL80211_RADAR_DETECTED, NL80211_RADAR_CAC_FINISHED, NL80211_RADAR_CAC_ABORTED, NL80211_RADAR_NOP_FINISHED, + NL80211_RADAR_PRE_CAC_EXPIRED, + NL80211_RADAR_CAC_STARTED, }; /** @@ -4598,7 +6280,7 @@ enum nl80211_dfs_state { }; /** - * enum enum nl80211_protocol_features - nl80211 protocol features + * enum nl80211_protocol_features - nl80211 protocol features * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting * wiphy dumps (if requested by the application with the attribute * %NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the @@ -4636,9 +6318,14 @@ enum nl80211_crit_proto_id { * Used by cfg80211_rx_mgmt() * * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver. + * @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload + * the authentication. Exclusively defined for host drivers that + * advertises the SME functionality but would like the userspace + * to handle certain authentication algorithms (e.g. SAE). */ enum nl80211_rxmgmt_flags { NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0, + NL80211_RXMGMT_FLAG_EXTERNAL_AUTH = 1 << 1, }; /* @@ -4670,11 +6357,13 @@ struct nl80211_vendor_cmd_info { * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable. * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable. * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable. + * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable. */ enum nl80211_tdls_peer_capability { NL80211_TDLS_PEER_HT = 1<<0, NL80211_TDLS_PEER_VHT = 1<<1, NL80211_TDLS_PEER_WMM = 1<<2, + NL80211_TDLS_PEER_HE = 1<<3, }; /** @@ -4701,4 +6390,963 @@ enum nl80211_sched_scan_plan { __NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1 }; +/** + * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters. + * + * @band: band of BSS that must match for RSSI value adjustment. The value + * of this field is according to &enum nl80211_band. + * @delta: value used to adjust the RSSI value of matching BSS in dB. + */ +struct nl80211_bss_select_rssi_adjust { + __u8 band; + __s8 delta; +} __attribute__((packed)); + +/** + * enum nl80211_bss_select_attr - attributes for bss selection. + * + * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved. + * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection + * is requested. + * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS + * selection should be done such that the specified band is preferred. + * When there are multiple BSS-es in the preferred band, the driver + * shall use RSSI-based BSS selection as a second step. The value of + * this attribute is according to &enum nl80211_band (u32). + * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for + * BSS-es in the specified band is to be adjusted before doing + * RSSI-based BSS selection. The attribute value is a packed structure + * value as specified by &struct nl80211_bss_select_rssi_adjust. + * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number. + * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use. + * + * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT + * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour + * which the driver shall use. + */ +enum nl80211_bss_select_attr { + __NL80211_BSS_SELECT_ATTR_INVALID, + NL80211_BSS_SELECT_ATTR_RSSI, + NL80211_BSS_SELECT_ATTR_BAND_PREF, + NL80211_BSS_SELECT_ATTR_RSSI_ADJUST, + + /* keep last */ + __NL80211_BSS_SELECT_ATTR_AFTER_LAST, + NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_nan_function_type - NAN function type + * + * Defines the function type of a NAN function + * + * @NL80211_NAN_FUNC_PUBLISH: function is publish + * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe + * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up + */ +enum nl80211_nan_function_type { + NL80211_NAN_FUNC_PUBLISH, + NL80211_NAN_FUNC_SUBSCRIBE, + NL80211_NAN_FUNC_FOLLOW_UP, + + /* keep last */ + __NL80211_NAN_FUNC_TYPE_AFTER_LAST, + NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1, +}; + +/** + * enum nl80211_nan_publish_type - NAN publish tx type + * + * Defines how to send publish Service Discovery Frames + * + * @NL80211_NAN_SOLICITED_PUBLISH: publish function is solicited + * @NL80211_NAN_UNSOLICITED_PUBLISH: publish function is unsolicited + */ +enum nl80211_nan_publish_type { + NL80211_NAN_SOLICITED_PUBLISH = 1 << 0, + NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1, +}; + +/** + * enum nl80211_nan_func_term_reason - NAN functions termination reason + * + * Defines termination reasons of a NAN function + * + * @NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST: requested by user + * @NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED: timeout + * @NL80211_NAN_FUNC_TERM_REASON_ERROR: errored + */ +enum nl80211_nan_func_term_reason { + NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST, + NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED, + NL80211_NAN_FUNC_TERM_REASON_ERROR, +}; + +#define NL80211_NAN_FUNC_SERVICE_ID_LEN 6 +#define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff +#define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff + +/** + * enum nl80211_nan_func_attributes - NAN function attributes + * @__NL80211_NAN_FUNC_INVALID: invalid + * @NL80211_NAN_FUNC_TYPE: &enum nl80211_nan_function_type (u8). + * @NL80211_NAN_FUNC_SERVICE_ID: 6 bytes of the service ID hash as + * specified in NAN spec. This is a binary attribute. + * @NL80211_NAN_FUNC_PUBLISH_TYPE: relevant if the function's type is + * publish. Defines the transmission type for the publish Service Discovery + * Frame, see &enum nl80211_nan_publish_type. Its type is u8. + * @NL80211_NAN_FUNC_PUBLISH_BCAST: relevant if the function is a solicited + * publish. Should the solicited publish Service Discovery Frame be sent to + * the NAN Broadcast address. This is a flag. + * @NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE: relevant if the function's type is + * subscribe. Is the subscribe active. This is a flag. + * @NL80211_NAN_FUNC_FOLLOW_UP_ID: relevant if the function's type is follow up. + * The instance ID for the follow up Service Discovery Frame. This is u8. + * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type + * is follow up. This is a u8. + * The requestor instance ID for the follow up Service Discovery Frame. + * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the + * follow up Service Discovery Frame. This is a binary attribute. + * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a + * close range. The range itself (RSSI) is defined by the device. + * This is a flag. + * @NL80211_NAN_FUNC_TTL: strictly positive number of DWs this function should + * stay active. If not present infinite TTL is assumed. This is a u32. + * @NL80211_NAN_FUNC_SERVICE_INFO: array of bytes describing the service + * specific info. This is a binary attribute. + * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute. + * See &enum nl80211_nan_srf_attributes. + * @NL80211_NAN_FUNC_RX_MATCH_FILTER: Receive Matching filter. This is a nested + * attribute. It is a list of binary values. + * @NL80211_NAN_FUNC_TX_MATCH_FILTER: Transmit Matching filter. This is a + * nested attribute. It is a list of binary values. + * @NL80211_NAN_FUNC_INSTANCE_ID: The instance ID of the function. + * Its type is u8 and it cannot be 0. + * @NL80211_NAN_FUNC_TERM_REASON: NAN function termination reason. + * See &enum nl80211_nan_func_term_reason. + * + * @NUM_NL80211_NAN_FUNC_ATTR: internal + * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute + */ +enum nl80211_nan_func_attributes { + __NL80211_NAN_FUNC_INVALID, + NL80211_NAN_FUNC_TYPE, + NL80211_NAN_FUNC_SERVICE_ID, + NL80211_NAN_FUNC_PUBLISH_TYPE, + NL80211_NAN_FUNC_PUBLISH_BCAST, + NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE, + NL80211_NAN_FUNC_FOLLOW_UP_ID, + NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID, + NL80211_NAN_FUNC_FOLLOW_UP_DEST, + NL80211_NAN_FUNC_CLOSE_RANGE, + NL80211_NAN_FUNC_TTL, + NL80211_NAN_FUNC_SERVICE_INFO, + NL80211_NAN_FUNC_SRF, + NL80211_NAN_FUNC_RX_MATCH_FILTER, + NL80211_NAN_FUNC_TX_MATCH_FILTER, + NL80211_NAN_FUNC_INSTANCE_ID, + NL80211_NAN_FUNC_TERM_REASON, + + /* keep last */ + NUM_NL80211_NAN_FUNC_ATTR, + NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 1 +}; + +/** + * enum nl80211_nan_srf_attributes - NAN Service Response filter attributes + * @__NL80211_NAN_SRF_INVALID: invalid + * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set. + * This is a flag. + * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if + * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary. + * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if + * %NL80211_NAN_SRF_BF is present. This is a u8. + * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if + * and only if %NL80211_NAN_SRF_BF isn't present. This is a nested + * attribute. Each nested attribute is a MAC address. + * @NUM_NL80211_NAN_SRF_ATTR: internal + * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute + */ +enum nl80211_nan_srf_attributes { + __NL80211_NAN_SRF_INVALID, + NL80211_NAN_SRF_INCLUDE, + NL80211_NAN_SRF_BF, + NL80211_NAN_SRF_BF_IDX, + NL80211_NAN_SRF_MAC_ADDRS, + + /* keep last */ + NUM_NL80211_NAN_SRF_ATTR, + NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1, +}; + +/** + * enum nl80211_nan_match_attributes - NAN match attributes + * @__NL80211_NAN_MATCH_INVALID: invalid + * @NL80211_NAN_MATCH_FUNC_LOCAL: the local function that had the + * match. This is a nested attribute. + * See &enum nl80211_nan_func_attributes. + * @NL80211_NAN_MATCH_FUNC_PEER: the peer function + * that caused the match. This is a nested attribute. + * See &enum nl80211_nan_func_attributes. + * + * @NUM_NL80211_NAN_MATCH_ATTR: internal + * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute + */ +enum nl80211_nan_match_attributes { + __NL80211_NAN_MATCH_INVALID, + NL80211_NAN_MATCH_FUNC_LOCAL, + NL80211_NAN_MATCH_FUNC_PEER, + + /* keep last */ + NUM_NL80211_NAN_MATCH_ATTR, + NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1 +}; + +/** + * nl80211_external_auth_action - Action to perform with external + * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION. + * @NL80211_EXTERNAL_AUTH_START: Start the authentication. + * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication. + */ +enum nl80211_external_auth_action { + NL80211_EXTERNAL_AUTH_START, + NL80211_EXTERNAL_AUTH_ABORT, +}; + +/** + * enum nl80211_ftm_responder_attributes - fine timing measurement + * responder attributes + * @__NL80211_FTM_RESP_ATTR_INVALID: Invalid + * @NL80211_FTM_RESP_ATTR_ENABLED: FTM responder is enabled + * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element + * (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10), + * i.e. starting with the measurement token + * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element + * (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13), + * i.e. starting with the measurement token + * @__NL80211_FTM_RESP_ATTR_LAST: Internal + * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute. + */ +enum nl80211_ftm_responder_attributes { + __NL80211_FTM_RESP_ATTR_INVALID, + + NL80211_FTM_RESP_ATTR_ENABLED, + NL80211_FTM_RESP_ATTR_LCI, + NL80211_FTM_RESP_ATTR_CIVICLOC, + + /* keep last */ + __NL80211_FTM_RESP_ATTR_LAST, + NL80211_FTM_RESP_ATTR_MAX = __NL80211_FTM_RESP_ATTR_LAST - 1, +}; + +/* + * enum nl80211_ftm_responder_stats - FTM responder statistics + * + * These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS + * when getting FTM responder statistics. + * + * @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved + * @NL80211_FTM_STATS_SUCCESS_NUM: number of FTM sessions in which all frames + * were ssfully answered (u32) + * @NL80211_FTM_STATS_PARTIAL_NUM: number of FTM sessions in which part of the + * frames were successfully answered (u32) + * @NL80211_FTM_STATS_FAILED_NUM: number of failed FTM sessions (u32) + * @NL80211_FTM_STATS_ASAP_NUM: number of ASAP sessions (u32) + * @NL80211_FTM_STATS_NON_ASAP_NUM: number of non-ASAP sessions (u32) + * @NL80211_FTM_STATS_TOTAL_DURATION_MSEC: total sessions durations - gives an + * indication of how much time the responder was busy (u64, msec) + * @NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM: number of unknown FTM triggers - + * triggers from initiators that didn't finish successfully the negotiation + * phase with the responder (u32) + * @NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM: number of FTM reschedule requests + * - initiator asks for a new scheduling although it already has scheduled + * FTM slot (u32) + * @NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM: number of FTM triggers out of + * scheduled window (u32) + * @NL80211_FTM_STATS_PAD: used for padding, ignore + * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal + * @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute + */ +enum nl80211_ftm_responder_stats { + __NL80211_FTM_STATS_INVALID, + NL80211_FTM_STATS_SUCCESS_NUM, + NL80211_FTM_STATS_PARTIAL_NUM, + NL80211_FTM_STATS_FAILED_NUM, + NL80211_FTM_STATS_ASAP_NUM, + NL80211_FTM_STATS_NON_ASAP_NUM, + NL80211_FTM_STATS_TOTAL_DURATION_MSEC, + NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM, + NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM, + NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM, + NL80211_FTM_STATS_PAD, + + /* keep last */ + __NL80211_FTM_STATS_AFTER_LAST, + NL80211_FTM_STATS_MAX = __NL80211_FTM_STATS_AFTER_LAST - 1 +}; + +/** + * enum nl80211_preamble - frame preamble types + * @NL80211_PREAMBLE_LEGACY: legacy (HR/DSSS, OFDM, ERP PHY) preamble + * @NL80211_PREAMBLE_HT: HT preamble + * @NL80211_PREAMBLE_VHT: VHT preamble + * @NL80211_PREAMBLE_DMG: DMG preamble + * @NL80211_PREAMBLE_HE: HE preamble + */ +enum nl80211_preamble { + NL80211_PREAMBLE_LEGACY, + NL80211_PREAMBLE_HT, + NL80211_PREAMBLE_VHT, + NL80211_PREAMBLE_DMG, + NL80211_PREAMBLE_HE, +}; + +/** + * enum nl80211_peer_measurement_type - peer measurement types + * @NL80211_PMSR_TYPE_INVALID: invalid/unused, needed as we use + * these numbers also for attributes + * + * @NL80211_PMSR_TYPE_FTM: flight time measurement + * + * @NUM_NL80211_PMSR_TYPES: internal + * @NL80211_PMSR_TYPE_MAX: highest type number + */ +enum nl80211_peer_measurement_type { + NL80211_PMSR_TYPE_INVALID, + + NL80211_PMSR_TYPE_FTM, + + NUM_NL80211_PMSR_TYPES, + NL80211_PMSR_TYPE_MAX = NUM_NL80211_PMSR_TYPES - 1 +}; + +/** + * enum nl80211_peer_measurement_status - peer measurement status + * @NL80211_PMSR_STATUS_SUCCESS: measurement completed successfully + * @NL80211_PMSR_STATUS_REFUSED: measurement was locally refused + * @NL80211_PMSR_STATUS_TIMEOUT: measurement timed out + * @NL80211_PMSR_STATUS_FAILURE: measurement failed, a type-dependent + * reason may be available in the response data + */ +enum nl80211_peer_measurement_status { + NL80211_PMSR_STATUS_SUCCESS, + NL80211_PMSR_STATUS_REFUSED, + NL80211_PMSR_STATUS_TIMEOUT, + NL80211_PMSR_STATUS_FAILURE, +}; + +/** + * enum nl80211_peer_measurement_req - peer measurement request attributes + * @__NL80211_PMSR_REQ_ATTR_INVALID: invalid + * + * @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement + * type-specific request data inside. The attributes used are from the + * enums named nl80211_peer_measurement__req. + * @NL80211_PMSR_REQ_ATTR_GET_AP_TSF: include AP TSF timestamp, if supported + * (flag attribute) + * + * @NUM_NL80211_PMSR_REQ_ATTRS: internal + * @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_req { + __NL80211_PMSR_REQ_ATTR_INVALID, + + NL80211_PMSR_REQ_ATTR_DATA, + NL80211_PMSR_REQ_ATTR_GET_AP_TSF, + + /* keep last */ + NUM_NL80211_PMSR_REQ_ATTRS, + NL80211_PMSR_REQ_ATTR_MAX = NUM_NL80211_PMSR_REQ_ATTRS - 1 +}; + +/** + * enum nl80211_peer_measurement_resp - peer measurement response attributes + * @__NL80211_PMSR_RESP_ATTR_INVALID: invalid + * + * @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement + * type-specific results inside. The attributes used are from the enums + * named nl80211_peer_measurement__resp. + * @NL80211_PMSR_RESP_ATTR_STATUS: u32 value with the measurement status + * (using values from &enum nl80211_peer_measurement_status.) + * @NL80211_PMSR_RESP_ATTR_HOST_TIME: host time (%CLOCK_BOOTTIME) when the + * result was measured; this value is not expected to be accurate to + * more than 20ms. (u64, nanoseconds) + * @NL80211_PMSR_RESP_ATTR_AP_TSF: TSF of the AP that the interface + * doing the measurement is connected to when the result was measured. + * This shall be accurately reported if supported and requested + * (u64, usec) + * @NL80211_PMSR_RESP_ATTR_FINAL: If results are sent to the host partially + * (*e.g. with FTM per-burst data) this flag will be cleared on all but + * the last result; if all results are combined it's set on the single + * result. + * @NL80211_PMSR_RESP_ATTR_PAD: padding for 64-bit attributes, ignore + * + * @NUM_NL80211_PMSR_RESP_ATTRS: internal + * @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_resp { + __NL80211_PMSR_RESP_ATTR_INVALID, + + NL80211_PMSR_RESP_ATTR_DATA, + NL80211_PMSR_RESP_ATTR_STATUS, + NL80211_PMSR_RESP_ATTR_HOST_TIME, + NL80211_PMSR_RESP_ATTR_AP_TSF, + NL80211_PMSR_RESP_ATTR_FINAL, + NL80211_PMSR_RESP_ATTR_PAD, + + /* keep last */ + NUM_NL80211_PMSR_RESP_ATTRS, + NL80211_PMSR_RESP_ATTR_MAX = NUM_NL80211_PMSR_RESP_ATTRS - 1 +}; + +/** + * enum nl80211_peer_measurement_peer_attrs - peer attributes for measurement + * @__NL80211_PMSR_PEER_ATTR_INVALID: invalid + * + * @NL80211_PMSR_PEER_ATTR_ADDR: peer's MAC address + * @NL80211_PMSR_PEER_ATTR_CHAN: channel definition, nested, using top-level + * attributes like %NL80211_ATTR_WIPHY_FREQ etc. + * @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by + * measurement type, with attributes from the + * &enum nl80211_peer_measurement_req inside. + * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by + * measurement type, with attributes from the + * &enum nl80211_peer_measurement_resp inside. + * + * @NUM_NL80211_PMSR_PEER_ATTRS: internal + * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_peer_attrs { + __NL80211_PMSR_PEER_ATTR_INVALID, + + NL80211_PMSR_PEER_ATTR_ADDR, + NL80211_PMSR_PEER_ATTR_CHAN, + NL80211_PMSR_PEER_ATTR_REQ, + NL80211_PMSR_PEER_ATTR_RESP, + + /* keep last */ + NUM_NL80211_PMSR_PEER_ATTRS, + NL80211_PMSR_PEER_ATTR_MAX = NUM_NL80211_PMSR_PEER_ATTRS - 1, +}; + +/** + * enum nl80211_peer_measurement_attrs - peer measurement attributes + * @__NL80211_PMSR_ATTR_INVALID: invalid + * + * @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability + * advertisement only, indicates the maximum number of peers + * measurements can be done with in a single request + * @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability + * indicating that the connected AP's TSF can be reported in + * measurement results + * @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability + * indicating that MAC address randomization is supported. + * @NL80211_PMSR_ATTR_TYPE_CAPA: capabilities reported by the device, + * this contains a nesting indexed by measurement type, and + * type-specific capabilities inside, which are from the enums + * named nl80211_peer_measurement__capa. + * @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is + * meaningless, just a list of peers to measure with, with the + * sub-attributes taken from + * &enum nl80211_peer_measurement_peer_attrs. + * + * @NUM_NL80211_PMSR_ATTR: internal + * @NL80211_PMSR_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_attrs { + __NL80211_PMSR_ATTR_INVALID, + + NL80211_PMSR_ATTR_MAX_PEERS, + NL80211_PMSR_ATTR_REPORT_AP_TSF, + NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR, + NL80211_PMSR_ATTR_TYPE_CAPA, + NL80211_PMSR_ATTR_PEERS, + + /* keep last */ + NUM_NL80211_PMSR_ATTR, + NL80211_PMSR_ATTR_MAX = NUM_NL80211_PMSR_ATTR - 1 +}; + +/** + * enum nl80211_peer_measurement_ftm_capa - FTM capabilities + * @__NL80211_PMSR_FTM_CAPA_ATTR_INVALID: invalid + * + * @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode + * is supported + * @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP + * mode is supported + * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI + * data can be requested during the measurement + * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic + * location data can be requested during the measurement + * @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits + * from &enum nl80211_preamble. + * @NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS: bitmap of values from + * &enum nl80211_chan_width indicating the supported channel + * bandwidths for FTM. Note that a higher channel bandwidth may be + * configured to allow for other measurements types with different + * bandwidth requirement in the same measurement. + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating + * the maximum bursts exponent that can be used (if not present anything + * is valid) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating + * the maximum FTMs per burst (if not present anything is valid) + * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if + * trigger based ranging measurement is supported + * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating + * if non trigger based ranging measurement is supported + * + * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_ftm_capa { + __NL80211_PMSR_FTM_CAPA_ATTR_INVALID, + + NL80211_PMSR_FTM_CAPA_ATTR_ASAP, + NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP, + NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI, + NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC, + NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES, + NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST, + NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED, + NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED, + + /* keep last */ + NUM_NL80211_PMSR_FTM_CAPA_ATTR, + NL80211_PMSR_FTM_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_CAPA_ATTR - 1 +}; + +/** + * enum nl80211_peer_measurement_ftm_req - FTM request attributes + * @__NL80211_PMSR_FTM_REQ_ATTR_INVALID: invalid + * + * @NL80211_PMSR_FTM_REQ_ATTR_ASAP: ASAP mode requested (flag) + * @NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE: preamble type (see + * &enum nl80211_preamble), optional for DMG (u32) + * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in + * 802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element" + * (u8, 0-15, optional with default 15 i.e. "no preference") + * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units + * of 100ms (u16, optional with default 0) + * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016 + * Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with + * default 15 i.e. "no preference") + * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames + * requested per burst + * (u8, 0-31, optional with default 0 i.e. "no preference") + * @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries + * (u8, default 3) + * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag) + * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data + * (flag) + * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging + * measurement (flag). + * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are + * mutually exclusive. + * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based + * ranging will be used. + * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based + * ranging measurement (flag) + * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are + * mutually exclusive. + * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based + * ranging will be used. + * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only + * valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * @NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR: optional. The BSS color of the + * responder. Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED + * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED is set. + * + * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal + * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_ftm_req { + __NL80211_PMSR_FTM_REQ_ATTR_INVALID, + + NL80211_PMSR_FTM_REQ_ATTR_ASAP, + NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE, + NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP, + NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD, + NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION, + NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST, + NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES, + NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI, + NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC, + NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED, + NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED, + NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK, + NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR, + + /* keep last */ + NUM_NL80211_PMSR_FTM_REQ_ATTR, + NL80211_PMSR_FTM_REQ_ATTR_MAX = NUM_NL80211_PMSR_FTM_REQ_ATTR - 1 +}; + +/** + * enum nl80211_peer_measurement_ftm_failure_reasons - FTM failure reasons + * @NL80211_PMSR_FTM_FAILURE_UNSPECIFIED: unspecified failure, not used + * @NL80211_PMSR_FTM_FAILURE_NO_RESPONSE: no response from the FTM responder + * @NL80211_PMSR_FTM_FAILURE_REJECTED: FTM responder rejected measurement + * @NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL: we already know the peer is + * on a different channel, so can't measure (if we didn't know, we'd + * try and get no response) + * @NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE: peer can't actually do FTM + * @NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP: invalid T1/T4 timestamps + * received + * @NL80211_PMSR_FTM_FAILURE_PEER_BUSY: peer reports busy, you may retry + * later (see %NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME) + * @NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS: parameters were changed + * by the peer and are no longer supported + */ +enum nl80211_peer_measurement_ftm_failure_reasons { + NL80211_PMSR_FTM_FAILURE_UNSPECIFIED, + NL80211_PMSR_FTM_FAILURE_NO_RESPONSE, + NL80211_PMSR_FTM_FAILURE_REJECTED, + NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL, + NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE, + NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP, + NL80211_PMSR_FTM_FAILURE_PEER_BUSY, + NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS, +}; + +/** + * enum nl80211_peer_measurement_ftm_resp - FTM response attributes + * @__NL80211_PMSR_FTM_RESP_ATTR_INVALID: invalid + * + * @NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON: FTM-specific failure reason + * (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX: optional, if bursts are reported + * as separate results then it will be the burst index 0...(N-1) and + * the top level will indicate partial results (u32) + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames + * transmitted (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames + * that were acknowleged (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the + * busy peer (u32, seconds) + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent + * used by the responder (similar to request, u8) + * @NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION: actual burst duration used by + * the responder (similar to request, u8) + * @NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST: actual FTMs per burst used + * by the responder (similar to request, u8) + * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG: average RSSI across all FTM action + * frames (optional, s32, 1/2 dBm) + * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD: RSSI spread across all FTM action + * frames (optional, s32, 1/2 dBm) + * @NL80211_PMSR_FTM_RESP_ATTR_TX_RATE: bitrate we used for the response to the + * FTM action frame (optional, nested, using &enum nl80211_rate_info + * attributes) + * @NL80211_PMSR_FTM_RESP_ATTR_RX_RATE: bitrate the responder used for the FTM + * action frame (optional, nested, using &enum nl80211_rate_info attrs) + * @NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG: average RTT (s64, picoseconds, optional + * but one of RTT/DIST must be present) + * @NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE: RTT variance (u64, ps^2, note that + * standard deviation is the square root of variance, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD: RTT spread (u64, picoseconds, + * optional) + * @NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG: average distance (s64, mm, optional + * but one of RTT/DIST must be present) + * @NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE: distance variance (u64, mm^2, note + * that standard deviation is the square root of variance, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD: distance spread (u64, mm, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_LCI: LCI data from peer (binary, optional); + * this is the contents of the Measurement Report Element (802.11-2016 + * 9.4.2.22.1) starting with the Measurement Token, with Measurement + * Type 8. + * @NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC: civic location data from peer + * (binary, optional); + * this is the contents of the Measurement Report Element (802.11-2016 + * 9.4.2.22.1) starting with the Measurement Token, with Measurement + * Type 11. + * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only + * + * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal + * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_ftm_resp { + __NL80211_PMSR_FTM_RESP_ATTR_INVALID, + + NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON, + NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX, + NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS, + NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES, + NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME, + NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP, + NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION, + NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST, + NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG, + NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD, + NL80211_PMSR_FTM_RESP_ATTR_TX_RATE, + NL80211_PMSR_FTM_RESP_ATTR_RX_RATE, + NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG, + NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE, + NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD, + NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG, + NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE, + NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD, + NL80211_PMSR_FTM_RESP_ATTR_LCI, + NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC, + NL80211_PMSR_FTM_RESP_ATTR_PAD, + + /* keep last */ + NUM_NL80211_PMSR_FTM_RESP_ATTR, + NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1 +}; + +/** + * enum nl80211_obss_pd_attributes - OBSS packet detection attributes + * @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid + * + * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset. + * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset. + * @NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET: the non-SRG OBSS PD maximum + * tx power offset. + * @NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP: bitmap that indicates the BSS color + * values used by members of the SRG. + * @NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP: bitmap that indicates the partial + * BSSID values used by members of the SRG. + * @NL80211_HE_OBSS_PD_ATTR_SR_CTRL: The SR Control field of SRP element. + * + * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal + * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute. + */ +enum nl80211_obss_pd_attributes { + __NL80211_HE_OBSS_PD_ATTR_INVALID, + + NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET, + NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET, + NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET, + NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP, + NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP, + NL80211_HE_OBSS_PD_ATTR_SR_CTRL, + + /* keep last */ + __NL80211_HE_OBSS_PD_ATTR_LAST, + NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1, +}; + +/** + * enum nl80211_bss_color_attributes - BSS Color attributes + * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid + * + * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color. + * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled. + * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used.. + * + * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal + * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute. + */ +enum nl80211_bss_color_attributes { + __NL80211_HE_BSS_COLOR_ATTR_INVALID, + + NL80211_HE_BSS_COLOR_ATTR_COLOR, + NL80211_HE_BSS_COLOR_ATTR_DISABLED, + NL80211_HE_BSS_COLOR_ATTR_PARTIAL, + + /* keep last */ + __NL80211_HE_BSS_COLOR_ATTR_LAST, + NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1, +}; + +/** + * enum nl80211_iftype_akm_attributes - interface type AKM attributes + * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid + * + * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag + * attribute for each interface type that supports AKM suites specified in + * %NL80211_IFTYPE_AKM_ATTR_SUITES + * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported + * AKM suites for the specified interface types. + * + * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal + * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute. + */ +enum nl80211_iftype_akm_attributes { + __NL80211_IFTYPE_AKM_ATTR_INVALID, + + NL80211_IFTYPE_AKM_ATTR_IFTYPES, + NL80211_IFTYPE_AKM_ATTR_SUITES, + + /* keep last */ + __NL80211_IFTYPE_AKM_ATTR_LAST, + NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1, +}; + +/** + * enum nl80211_fils_discovery_attributes - FILS discovery configuration + * from IEEE Std 802.11ai-2016, Annex C.3 MIB detail. + * + * @__NL80211_FILS_DISCOVERY_ATTR_INVALID: Invalid + * + * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU). + * Allowed range: 0..10000 (TU = Time Unit) + * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU). + * Allowed range: 0..10000 (TU = Time Unit) + * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action + * frame including the headers. + * + * @__NL80211_FILS_DISCOVERY_ATTR_LAST: Internal + * @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute + */ +enum nl80211_fils_discovery_attributes { + __NL80211_FILS_DISCOVERY_ATTR_INVALID, + + NL80211_FILS_DISCOVERY_ATTR_INT_MIN, + NL80211_FILS_DISCOVERY_ATTR_INT_MAX, + NL80211_FILS_DISCOVERY_ATTR_TMPL, + + /* keep last */ + __NL80211_FILS_DISCOVERY_ATTR_LAST, + NL80211_FILS_DISCOVERY_ATTR_MAX = __NL80211_FILS_DISCOVERY_ATTR_LAST - 1 +}; + +/* + * FILS discovery template minimum length with action frame headers and + * mandatory fields. + */ +#define NL80211_FILS_DISCOVERY_TMPL_MIN_LEN 42 + +/** + * enum nl80211_unsol_bcast_probe_resp_attributes - Unsolicited broadcast probe + * response configuration. Applicable only in 6GHz. + * + * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID: Invalid + * + * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU). + * Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0 + * 26.17.2.3.2 (AP behavior for fast passive scanning). + * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response + * frame template (binary). + * + * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST: Internal + * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute + */ +enum nl80211_unsol_bcast_probe_resp_attributes { + __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID, + + NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT, + NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL, + + /* keep last */ + __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST, + NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX = + __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1 +}; + +/** + * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE + * derivation. Applicable only when WPA3-Personal SAE authentication is + * used. + * + * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that + * attribute is not present from userspace. + * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only + * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only + * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element + * can be used. + */ +enum nl80211_sae_pwe_mechanism { + NL80211_SAE_PWE_UNSPECIFIED, + NL80211_SAE_PWE_HUNT_AND_PECK, + NL80211_SAE_PWE_HASH_TO_ELEMENT, + NL80211_SAE_PWE_BOTH, +}; + +/** + * enum nl80211_sar_type - type of SAR specs + * + * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit + * + */ +enum nl80211_sar_type { + NL80211_SAR_TYPE_POWER, + + /* add new type here */ + + /* Keep last */ + NUM_NL80211_SAR_TYPE, +}; + +/** + * enum nl80211_sar_attrs - Attributes for SAR spec + * + * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type. + * + * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power + * limit specifications. Each specification contains a set + * of %nl80211_sar_specs_attrs. + * + * For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER + * and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX. + * + * For sar_capa dump, it contains array of + * %NL80211_SAR_ATTR_SPECS_START_FREQ + * and %NL80211_SAR_ATTR_SPECS_END_FREQ. + * + * @__NL80211_SAR_ATTR_LAST: Internal + * @NL80211_SAR_ATTR_MAX: highest sar attribute + * + * These attributes are used with %NL80211_CMD_SET_SAR_SPEC + */ +enum nl80211_sar_attrs { + __NL80211_SAR_ATTR_INVALID, + + NL80211_SAR_ATTR_TYPE, + NL80211_SAR_ATTR_SPECS, + + __NL80211_SAR_ATTR_LAST, + NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1, +}; + +/** + * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs + * + * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual + * power limit value in units of 0.25 dBm if type is + * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm). + * 0 means userspace doesn't have SAR limitation on this associated range. + * + * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the + * index of exported freq range table and the associated power limitation + * is applied to this range. + * + * Userspace isn't required to set all the ranges advertised by WLAN driver, + * and userspace can skip some certain ranges. These skipped ranges don't + * have SAR limitations, and they are same as setting the + * %NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any + * value higher than regulatory allowed value just means SAR power + * limitation is removed, but it's required to set at least one range. + * It's not allowed to set duplicated range in one SET operation. + * + * Every SET operation overwrites previous SET operation. + * + * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start + * frequency of this range edge when registering SAR capability to wiphy. + * It's not a channel center frequency. The unit is kHz. + * + * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end + * frequency of this range edge when registering SAR capability to wiphy. + * It's not a channel center frequency. The unit is kHz. + * + * @__NL80211_SAR_ATTR_SPECS_LAST: Internal + * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute + */ +enum nl80211_sar_specs_attrs { + __NL80211_SAR_ATTR_SPECS_INVALID, + + NL80211_SAR_ATTR_SPECS_POWER, + NL80211_SAR_ATTR_SPECS_RANGE_INDEX, + NL80211_SAR_ATTR_SPECS_START_FREQ, + NL80211_SAR_ATTR_SPECS_END_FREQ, + + __NL80211_SAR_ATTR_SPECS_LAST, + NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1, +}; + #endif /* __LINUX_NL80211_H */