mac80211: brcmfmac: backport fixes from kernel 5.4
authorRafał Miłecki <rafal@milecki.pl>
Sun, 21 Jul 2019 21:09:53 +0000 (23:09 +0200)
committerRafał Miłecki <rafal@milecki.pl>
Mon, 22 Jul 2019 05:11:56 +0000 (07:11 +0200)
This fixes:
1) Crash during USB disconnect
2) Crash in brcmf_txfinalize() on rmmod with packets queued
3) Some errors in exit path

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
package/kernel/mac80211/patches/467-v5.4-brcmfmac-use-strlcpy-instead-of-strcpy.patch [new file with mode: 0644]
package/kernel/mac80211/patches/468-v5.4-0001-brcmfmac-add-160MHz-in-chandef_to_chanspec.patch [new file with mode: 0644]
package/kernel/mac80211/patches/469-v5.4-0001-Revert-brcmfmac-fix-NULL-pointer-derefence-during-US.patch [new file with mode: 0644]
package/kernel/mac80211/patches/469-v5.4-0002-brcmfmac-change-the-order-of-things-in-brcmf_detach.patch [new file with mode: 0644]
package/kernel/mac80211/patches/469-v5.4-0003-brcmfmac-avoid-firmware-command-in-brcmf_netdev_open.patch [new file with mode: 0644]
package/kernel/mac80211/patches/469-v5.4-0004-brcmfmac-clear-events-in-brcmf_fweh_detach-will-alwa.patch [new file with mode: 0644]
package/kernel/mac80211/patches/469-v5.4-0005-brcmfmac-avoid-firmware-commands-when-bus-is-down.patch [new file with mode: 0644]
package/kernel/mac80211/patches/469-v5.4-0006-brcmfmac-simply-remove-flowring-if-bus-is-down.patch [new file with mode: 0644]
package/kernel/mac80211/patches/469-v5.4-0007-brcmfmac-remove-unnecessary-strlcpy-upon-obtaining-v.patch [new file with mode: 0644]
package/kernel/mac80211/patches/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch
package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch

diff --git a/package/kernel/mac80211/patches/467-v5.4-brcmfmac-use-strlcpy-instead-of-strcpy.patch b/package/kernel/mac80211/patches/467-v5.4-brcmfmac-use-strlcpy-instead-of-strcpy.patch
new file mode 100644 (file)
index 0000000..8731a99
--- /dev/null
@@ -0,0 +1,26 @@
+From bbfab331e3abd9fa8767eea6bf5c4684cdd4b934 Mon Sep 17 00:00:00 2001
+From: Neo Jou <neojou@gmail.com>
+Date: Tue, 21 May 2019 17:12:20 +0800
+Subject: [PATCH] brcmfmac: use strlcpy() instead of strcpy()
+
+The function strcpy() is inherently not safe. Though the function
+works without problems here, it would be better to use other safer
+function, e.g. strlcpy(), to replace strcpy() still.
+
+Signed-off-by: Neo Jou <neojou@gmail.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+@@ -269,7 +269,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
+       /* query for 'ver' to get version info from firmware */
+       memset(buf, 0, sizeof(buf));
+-      strcpy(buf, "ver");
++      strlcpy(buf, "ver", sizeof(buf));
+       err = brcmf_fil_iovar_data_get(ifp, "ver", buf, sizeof(buf));
+       if (err < 0) {
+               bphy_err(drvr, "Retrieving version information failed, %d\n",
diff --git a/package/kernel/mac80211/patches/468-v5.4-0001-brcmfmac-add-160MHz-in-chandef_to_chanspec.patch b/package/kernel/mac80211/patches/468-v5.4-0001-brcmfmac-add-160MHz-in-chandef_to_chanspec.patch
new file mode 100644 (file)
index 0000000..a3a3006
--- /dev/null
@@ -0,0 +1,55 @@
+From 46f24cd5980de4302982d38ebb6620560ead10b3 Mon Sep 17 00:00:00 2001
+From: Arend van Spriel <arend.vanspriel@broadcom.com>
+Date: Thu, 11 Jul 2019 10:45:30 +0200
+Subject: [PATCH 1/3] brcmfmac: add 160MHz in chandef_to_chanspec()
+
+The function chandef_to_chanspec() was not handling 160MHz bandwidth
+resulting in wrong encoding of the channel. That resulting in firmware
+rejecting the provided channel specification.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+---
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c    | 21 ++++++++++++++++++-
+ 1 file changed, 20 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -287,8 +287,26 @@ static u16 chandef_to_chanspec(struct br
+               else
+                       ch_inf.sb = BRCMU_CHAN_SB_UU;
+               break;
+-      case NL80211_CHAN_WIDTH_80P80:
+       case NL80211_CHAN_WIDTH_160:
++              ch_inf.bw = BRCMU_CHAN_BW_160;
++              if (primary_offset == -70)
++                      ch_inf.sb = BRCMU_CHAN_SB_LLL;
++              else if (primary_offset == -50)
++                      ch_inf.sb = BRCMU_CHAN_SB_LLU;
++              else if (primary_offset == -30)
++                      ch_inf.sb = BRCMU_CHAN_SB_LUL;
++              else if (primary_offset == -10)
++                      ch_inf.sb = BRCMU_CHAN_SB_LUU;
++              else if (primary_offset == 10)
++                      ch_inf.sb = BRCMU_CHAN_SB_ULL;
++              else if (primary_offset == 30)
++                      ch_inf.sb = BRCMU_CHAN_SB_ULU;
++              else if (primary_offset == 50)
++                      ch_inf.sb = BRCMU_CHAN_SB_UUL;
++              else
++                      ch_inf.sb = BRCMU_CHAN_SB_UUU;
++              break;
++      case NL80211_CHAN_WIDTH_80P80:
+       case NL80211_CHAN_WIDTH_5:
+       case NL80211_CHAN_WIDTH_10:
+       default:
+@@ -307,6 +325,7 @@ static u16 chandef_to_chanspec(struct br
+       }
+       d11inf->encchspec(&ch_inf);
++      brcmf_dbg(TRACE, "chanspec: 0x%x\n", ch_inf.chspec);
+       return ch_inf.chspec;
+ }
diff --git a/package/kernel/mac80211/patches/469-v5.4-0001-Revert-brcmfmac-fix-NULL-pointer-derefence-during-US.patch b/package/kernel/mac80211/patches/469-v5.4-0001-Revert-brcmfmac-fix-NULL-pointer-derefence-during-US.patch
new file mode 100644 (file)
index 0000000..70b5a6d
--- /dev/null
@@ -0,0 +1,167 @@
+From 7acf04a0ae2adf5d3e9de9adeec3129e74bf6ef2 Mon Sep 17 00:00:00 2001
+From: Arend van Spriel <arend.vanspriel@broadcom.com>
+Date: Thu, 11 Jul 2019 11:05:06 +0200
+Subject: [PATCH 1/7] Revert "brcmfmac: fix NULL pointer derefence during USB
+ disconnect"
+
+This reverts commit 5cdb0ef6144f47440850553579aa923c20a63f23. Subsequent
+changes make rework the driver code fixing the issue differently.
+
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+---
+ .../wireless/broadcom/brcm80211/brcmfmac/bcdc.c  | 11 ++---------
+ .../wireless/broadcom/brcm80211/brcmfmac/bcdc.h  |  6 ++----
+ .../wireless/broadcom/brcm80211/brcmfmac/core.c  |  4 +---
+ .../broadcom/brcm80211/brcmfmac/fwsignal.c       | 16 ++++------------
+ .../broadcom/brcm80211/brcmfmac/fwsignal.h       |  3 +--
+ .../wireless/broadcom/brcm80211/brcmfmac/proto.c | 10 ++--------
+ .../wireless/broadcom/brcm80211/brcmfmac/proto.h |  3 +--
+ 7 files changed, 13 insertions(+), 40 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
+@@ -490,18 +490,11 @@ fail:
+       return -ENOMEM;
+ }
+-void brcmf_proto_bcdc_detach_pre_delif(struct brcmf_pub *drvr)
+-{
+-      struct brcmf_bcdc *bcdc = drvr->proto->pd;
+-
+-      brcmf_fws_detach_pre_delif(bcdc->fws);
+-}
+-
+-void brcmf_proto_bcdc_detach_post_delif(struct brcmf_pub *drvr)
++void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr)
+ {
+       struct brcmf_bcdc *bcdc = drvr->proto->pd;
+       drvr->proto->pd = NULL;
+-      brcmf_fws_detach_post_delif(bcdc->fws);
++      brcmf_fws_detach(bcdc->fws);
+       kfree(bcdc);
+ }
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h
+@@ -18,16 +18,14 @@
+ #ifdef CPTCFG_BRCMFMAC_PROTO_BCDC
+ int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr);
+-void brcmf_proto_bcdc_detach_pre_delif(struct brcmf_pub *drvr);
+-void brcmf_proto_bcdc_detach_post_delif(struct brcmf_pub *drvr);
++void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr);
+ void brcmf_proto_bcdc_txflowblock(struct device *dev, bool state);
+ void brcmf_proto_bcdc_txcomplete(struct device *dev, struct sk_buff *txp,
+                                bool success);
+ struct brcmf_fws_info *drvr_to_fws(struct brcmf_pub *drvr);
+ #else
+ static inline int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) { return 0; }
+-static void brcmf_proto_bcdc_detach_pre_delif(struct brcmf_pub *drvr) {};
+-static inline void brcmf_proto_bcdc_detach_post_delif(struct brcmf_pub *drvr) {}
++static inline void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr) {}
+ #endif
+ #endif /* BRCMFMAC_BCDC_H */
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -1344,8 +1344,6 @@ void brcmf_detach(struct device *dev)
+       brcmf_bus_change_state(bus_if, BRCMF_BUS_DOWN);
+-      brcmf_proto_detach_pre_delif(drvr);
+-
+       /* make sure primary interface removed last */
+       for (i = BRCMF_MAX_IFS-1; i > -1; i--)
+               brcmf_remove_interface(drvr->iflist[i], false);
+@@ -1355,7 +1353,7 @@ void brcmf_detach(struct device *dev)
+       brcmf_bus_stop(drvr->bus_if);
+-      brcmf_proto_detach_post_delif(drvr);
++      brcmf_proto_detach(drvr);
+       bus_if->drvr = NULL;
+       wiphy_free(drvr->wiphy);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
+@@ -2416,25 +2416,17 @@ struct brcmf_fws_info *brcmf_fws_attach(
+       return fws;
+ fail:
+-      brcmf_fws_detach_pre_delif(fws);
+-      brcmf_fws_detach_post_delif(fws);
++      brcmf_fws_detach(fws);
+       return ERR_PTR(rc);
+ }
+-void brcmf_fws_detach_pre_delif(struct brcmf_fws_info *fws)
++void brcmf_fws_detach(struct brcmf_fws_info *fws)
+ {
+       if (!fws)
+               return;
+-      if (fws->fws_wq) {
+-              destroy_workqueue(fws->fws_wq);
+-              fws->fws_wq = NULL;
+-      }
+-}
+-void brcmf_fws_detach_post_delif(struct brcmf_fws_info *fws)
+-{
+-      if (!fws)
+-              return;
++      if (fws->fws_wq)
++              destroy_workqueue(fws->fws_wq);
+       /* cleanup */
+       brcmf_fws_lock(fws);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.h
+@@ -19,8 +19,7 @@
+ #define FWSIGNAL_H_
+ struct brcmf_fws_info *brcmf_fws_attach(struct brcmf_pub *drvr);
+-void brcmf_fws_detach_pre_delif(struct brcmf_fws_info *fws);
+-void brcmf_fws_detach_post_delif(struct brcmf_fws_info *fws);
++void brcmf_fws_detach(struct brcmf_fws_info *fws);
+ void brcmf_fws_debugfs_create(struct brcmf_pub *drvr);
+ bool brcmf_fws_queue_skbs(struct brcmf_fws_info *fws);
+ bool brcmf_fws_fc_active(struct brcmf_fws_info *fws);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.c
+@@ -67,22 +67,16 @@ fail:
+       return -ENOMEM;
+ }
+-void brcmf_proto_detach_post_delif(struct brcmf_pub *drvr)
++void brcmf_proto_detach(struct brcmf_pub *drvr)
+ {
+       brcmf_dbg(TRACE, "Enter\n");
+       if (drvr->proto) {
+               if (drvr->bus_if->proto_type == BRCMF_PROTO_BCDC)
+-                      brcmf_proto_bcdc_detach_post_delif(drvr);
++                      brcmf_proto_bcdc_detach(drvr);
+               else if (drvr->bus_if->proto_type == BRCMF_PROTO_MSGBUF)
+                       brcmf_proto_msgbuf_detach(drvr);
+               kfree(drvr->proto);
+               drvr->proto = NULL;
+       }
+ }
+-
+-void brcmf_proto_detach_pre_delif(struct brcmf_pub *drvr)
+-{
+-      if (drvr->proto && drvr->bus_if->proto_type == BRCMF_PROTO_BCDC)
+-              brcmf_proto_bcdc_detach_pre_delif(drvr);
+-}
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
+@@ -54,8 +54,7 @@ struct brcmf_proto {
+ int brcmf_proto_attach(struct brcmf_pub *drvr);
+-void brcmf_proto_detach_pre_delif(struct brcmf_pub *drvr);
+-void brcmf_proto_detach_post_delif(struct brcmf_pub *drvr);
++void brcmf_proto_detach(struct brcmf_pub *drvr);
+ static inline int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws,
+                                     struct sk_buff *skb,
diff --git a/package/kernel/mac80211/patches/469-v5.4-0002-brcmfmac-change-the-order-of-things-in-brcmf_detach.patch b/package/kernel/mac80211/patches/469-v5.4-0002-brcmfmac-change-the-order-of-things-in-brcmf_detach.patch
new file mode 100644 (file)
index 0000000..2affe12
--- /dev/null
@@ -0,0 +1,66 @@
+From 701fb69f2c36cba83583990e67a3925f920fd96a Mon Sep 17 00:00:00 2001
+From: Arend van Spriel <arend.vanspriel@broadcom.com>
+Date: Thu, 11 Jul 2019 11:05:07 +0200
+Subject: [PATCH 2/7] brcmfmac: change the order of things in brcmf_detach()
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+When brcmf_detach() from the bus layer upon rmmod we can no longer
+communicate. Hence we will set the bus state to DOWN and cleanup
+the event and protocol layer. The network interfaces need to be
+deleted before brcmf_cfg80211_detach() because the latter does the
+wiphy_unregister() which issues a warning if there are still network
+devices linked to the wiphy instance.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Tested-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ .../broadcom/brcm80211/brcmfmac/core.c        | 27 ++++++++++---------
+ 1 file changed, 14 insertions(+), 13 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -1337,25 +1337,26 @@ void brcmf_detach(struct device *dev)
+       unregister_inet6addr_notifier(&drvr->inet6addr_notifier);
+ #endif
+-      /* stop firmware event handling */
+-      brcmf_fweh_detach(drvr);
+-      if (drvr->config)
+-              brcmf_p2p_detach(&drvr->config->p2p);
+-
+       brcmf_bus_change_state(bus_if, BRCMF_BUS_DOWN);
+-
+-      /* make sure primary interface removed last */
+-      for (i = BRCMF_MAX_IFS-1; i > -1; i--)
+-              brcmf_remove_interface(drvr->iflist[i], false);
+-
+-      brcmf_cfg80211_detach(drvr->config);
+-      drvr->config = NULL;
+-
+       brcmf_bus_stop(drvr->bus_if);
++      brcmf_fweh_detach(drvr);
+       brcmf_proto_detach(drvr);
++      /* make sure primary interface removed last */
++      for (i = BRCMF_MAX_IFS - 1; i > -1; i--) {
++              if (drvr->iflist[i])
++                      brcmf_del_if(drvr, drvr->iflist[i]->bsscfgidx, false);
++      }
++
++      if (drvr->config) {
++              brcmf_p2p_detach(&drvr->config->p2p);
++              brcmf_cfg80211_detach(drvr->config);
++              drvr->config = NULL;
++      }
++
+       bus_if->drvr = NULL;
++
+       wiphy_free(drvr->wiphy);
+ }
diff --git a/package/kernel/mac80211/patches/469-v5.4-0003-brcmfmac-avoid-firmware-command-in-brcmf_netdev_open.patch b/package/kernel/mac80211/patches/469-v5.4-0003-brcmfmac-avoid-firmware-command-in-brcmf_netdev_open.patch
new file mode 100644 (file)
index 0000000..567abe0
--- /dev/null
@@ -0,0 +1,29 @@
+From 1be747d977014fea13dbac0de885c0c358eb393c Mon Sep 17 00:00:00 2001
+From: Arend van Spriel <arend.vanspriel@broadcom.com>
+Date: Thu, 11 Jul 2019 11:05:08 +0200
+Subject: [PATCH 3/7] brcmfmac: avoid firmware command in brcmf_netdev_open()
+ when bus is down
+
+No point in sending a firmware command when bus is down so make it
+conditional checking the state.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -589,7 +589,8 @@ static int brcmf_netdev_stop(struct net_
+       brcmf_cfg80211_down(ndev);
+-      brcmf_fil_iovar_data_set(ifp, "arp_hostip_clear", NULL, 0);
++      if (ifp->drvr->bus_if->state == BRCMF_BUS_UP)
++              brcmf_fil_iovar_data_set(ifp, "arp_hostip_clear", NULL, 0);
+       brcmf_net_setcarrier(ifp, false);
diff --git a/package/kernel/mac80211/patches/469-v5.4-0004-brcmfmac-clear-events-in-brcmf_fweh_detach-will-alwa.patch b/package/kernel/mac80211/patches/469-v5.4-0004-brcmfmac-clear-events-in-brcmf_fweh_detach-will-alwa.patch
new file mode 100644 (file)
index 0000000..8483249
--- /dev/null
@@ -0,0 +1,37 @@
+From 0d91defd7bfc42c0ed053ba03b5ea2eff2e1d2f5 Mon Sep 17 00:00:00 2001
+From: Arend van Spriel <arend.vanspriel@broadcom.com>
+Date: Thu, 11 Jul 2019 11:05:09 +0200
+Subject: [PATCH 4/7] brcmfmac: clear events in brcmf_fweh_detach() will always
+ fail
+
+Clearing firmware events in brcmf_fweh_detach() is always failing
+because it is called only upon driver remove and communication
+with firmware is no longer possible.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c | 9 ---------
+ 1 file changed, 9 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
+@@ -314,16 +314,7 @@ void brcmf_fweh_attach(struct brcmf_pub
+ void brcmf_fweh_detach(struct brcmf_pub *drvr)
+ {
+       struct brcmf_fweh_info *fweh = &drvr->fweh;
+-      struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
+-      s8 eventmask[BRCMF_EVENTING_MASK_LEN];
+-      if (ifp) {
+-              /* clear all events */
+-              memset(eventmask, 0, BRCMF_EVENTING_MASK_LEN);
+-              (void)brcmf_fil_iovar_data_set(ifp, "event_msgs",
+-                                             eventmask,
+-                                             BRCMF_EVENTING_MASK_LEN);
+-      }
+       /* cancel the worker */
+       cancel_work_sync(&fweh->event_work);
+       WARN_ON(!list_empty(&fweh->event_q));
diff --git a/package/kernel/mac80211/patches/469-v5.4-0005-brcmfmac-avoid-firmware-commands-when-bus-is-down.patch b/package/kernel/mac80211/patches/469-v5.4-0005-brcmfmac-avoid-firmware-commands-when-bus-is-down.patch
new file mode 100644 (file)
index 0000000..4cfc0d0
--- /dev/null
@@ -0,0 +1,78 @@
+From 66ab63fbb33bf367807e3e471231379dce6f8b8c Mon Sep 17 00:00:00 2001
+From: Arend van Spriel <arend.vanspriel@broadcom.com>
+Date: Thu, 11 Jul 2019 11:05:10 +0200
+Subject: [PATCH 5/7] brcmfmac: avoid firmware commands when bus is down
+
+Upon rmmod a few attempts are made to inform firmware, but there is
+no point as the bus is down and these will fail. Avoid them to keep
+the logs clean.
+
+Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+---
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c    | 23 +++++++++++--------
+ 1 file changed, 13 insertions(+), 10 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -1297,17 +1297,21 @@ static void brcmf_link_down(struct brcmf
+ {
+       struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(vif->wdev.wiphy);
+       struct brcmf_pub *drvr = cfg->pub;
++      bool bus_up = drvr->bus_if->state == BRCMF_BUS_UP;
+       s32 err = 0;
+       brcmf_dbg(TRACE, "Enter\n");
+       if (test_and_clear_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state)) {
+-              brcmf_dbg(INFO, "Call WLC_DISASSOC to stop excess roaming\n ");
+-              err = brcmf_fil_cmd_data_set(vif->ifp,
+-                                           BRCMF_C_DISASSOC, NULL, 0);
+-              if (err) {
+-                      bphy_err(drvr, "WLC_DISASSOC failed (%d)\n", err);
++              if (bus_up) {
++                      brcmf_dbg(INFO, "Call WLC_DISASSOC to stop excess roaming\n");
++                      err = brcmf_fil_cmd_data_set(vif->ifp,
++                                                   BRCMF_C_DISASSOC, NULL, 0);
++                      if (err)
++                              bphy_err(drvr, "WLC_DISASSOC failed (%d)\n",
++                                       err);
+               }
++
+               if ((vif->wdev.iftype == NL80211_IFTYPE_STATION) ||
+                   (vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT))
+                       cfg80211_disconnected(vif->wdev.netdev, reason, NULL, 0,
+@@ -1317,7 +1321,8 @@ static void brcmf_link_down(struct brcmf
+       clear_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status);
+       brcmf_btcoex_set_mode(vif, BRCMF_BTCOEX_ENABLED, 0);
+       if (vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_NONE) {
+-              brcmf_set_pmk(vif->ifp, NULL, 0);
++              if (bus_up)
++                      brcmf_set_pmk(vif->ifp, NULL, 0);
+               vif->profile.use_fwsup = BRCMF_PROFILE_FWSUP_NONE;
+       }
+       brcmf_dbg(TRACE, "Exit\n");
+@@ -5006,18 +5011,16 @@ static int brcmf_cfg80211_get_channel(st
+       struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
+       struct net_device *ndev = wdev->netdev;
+       struct brcmf_pub *drvr = cfg->pub;
+-      struct brcmf_if *ifp;
+       struct brcmu_chan ch;
+       enum nl80211_band band = 0;
+       enum nl80211_chan_width width = 0;
+       u32 chanspec;
+       int freq, err;
+-      if (!ndev)
++      if (!ndev || drvr->bus_if->state != BRCMF_BUS_UP)
+               return -ENODEV;
+-      ifp = netdev_priv(ndev);
+-      err = brcmf_fil_iovar_int_get(ifp, "chanspec", &chanspec);
++      err = brcmf_fil_iovar_int_get(netdev_priv(ndev), "chanspec", &chanspec);
+       if (err) {
+               bphy_err(drvr, "chanspec failed (%d)\n", err);
+               return err;
diff --git a/package/kernel/mac80211/patches/469-v5.4-0006-brcmfmac-simply-remove-flowring-if-bus-is-down.patch b/package/kernel/mac80211/patches/469-v5.4-0006-brcmfmac-simply-remove-flowring-if-bus-is-down.patch
new file mode 100644 (file)
index 0000000..fd010f2
--- /dev/null
@@ -0,0 +1,32 @@
+From dabf1e17d33e087d4e24e6d0224cf9bc04ebfcc1 Mon Sep 17 00:00:00 2001
+From: Arend van Spriel <arend.vanspriel@broadcom.com>
+Date: Thu, 11 Jul 2019 11:05:11 +0200
+Subject: [PATCH 6/7] brcmfmac: simply remove flowring if bus is down
+
+When the bus is down, eg. due to rmmod, there is no need to
+attempt to inform firmware about it.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
+@@ -1408,6 +1408,13 @@ void brcmf_msgbuf_delete_flowring(struct
+       u8 ifidx;
+       int err;
++      /* no need to submit if firmware can not be reached */
++      if (drvr->bus_if->state != BRCMF_BUS_UP) {
++              brcmf_dbg(MSGBUF, "bus down, flowring will be removed\n");
++              brcmf_msgbuf_remove_flowring(msgbuf, flowid);
++              return;
++      }
++
+       commonring = msgbuf->commonrings[BRCMF_H2D_MSGRING_CONTROL_SUBMIT];
+       brcmf_commonring_lock(commonring);
+       ret_ptr = brcmf_commonring_reserve_for_write(commonring);
diff --git a/package/kernel/mac80211/patches/469-v5.4-0007-brcmfmac-remove-unnecessary-strlcpy-upon-obtaining-v.patch b/package/kernel/mac80211/patches/469-v5.4-0007-brcmfmac-remove-unnecessary-strlcpy-upon-obtaining-v.patch
new file mode 100644 (file)
index 0000000..a1fcebd
--- /dev/null
@@ -0,0 +1,27 @@
+From 979c9a17fc78f3b8393fd92ca250fe4239872eee Mon Sep 17 00:00:00 2001
+From: Arend van Spriel <arend.vanspriel@broadcom.com>
+Date: Thu, 11 Jul 2019 11:05:12 +0200
+Subject: [PATCH 7/7] brcmfmac: remove unnecessary strlcpy() upon obtaining
+ "ver" iovar
+
+Recently a strcpy() was replaced by strlcpy(). However, the strcpy()
+was not needed in the first place. So removing that line of code.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+@@ -269,7 +269,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
+       /* query for 'ver' to get version info from firmware */
+       memset(buf, 0, sizeof(buf));
+-      strlcpy(buf, "ver", sizeof(buf));
+       err = brcmf_fil_iovar_data_get(ifp, "ver", buf, sizeof(buf));
+       if (err < 0) {
+               bphy_err(drvr, "Retrieving version information failed, %d\n",
index 45cfb1ddbf3fe46b93d2f0321f9bb78563ebb2ba..912fe8ca14e0d96d065850dc7859d4f1e9003e10 100644 (file)
@@ -10,7 +10,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -620,8 +620,36 @@ static struct wireless_dev *brcmf_cfg802
+@@ -639,8 +639,36 @@ static struct wireless_dev *brcmf_cfg802
        struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
        struct brcmf_pub *drvr = cfg->pub;
        struct wireless_dev *wdev;
index 5cbc48f76ae8d2947707cf134d6a3ab68352bb67..578b3e039988614ee73130e0f094add365eff0de 100644 (file)
@@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -2774,6 +2774,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
+@@ -2798,6 +2798,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
         * preference in cfg struct to apply this to
         * FW later while initializing the dongle
         */