mediatek: filogic: add support for Cudy RE3000 v1
authorRobert Senderek <robert.senderek@10g.pl>
Fri, 16 Feb 2024 13:04:40 +0000 (14:04 +0100)
committerHauke Mehrtens <hauke@hauke-m.de>
Thu, 7 Mar 2024 21:14:32 +0000 (22:14 +0100)
MT7981B /256MB /16MB SPI (XM25QH128C)
AX 2.4Ghz
AX 5Ghz 160Mhz wide
1Gbit LAN

OEM:
root@RE3000:~# ifconfig |grep HWaddr
br-lan    Link encap:Ethernet  HWaddr 80:XX:XX:08:XX:X0 (label)
br-wan    Link encap:Ethernet  HWaddr 80:XX:XX:08:XX:X0
eth0      Link encap:Ethernet  HWaddr 80:XX:XX:08:XX:X0
ra0       Link encap:Ethernet  HWaddr 80:XX:XX:08:XX:X0
ra2       Link encap:Ethernet  HWaddr 82:XX:XX:28:XX:X0
rax0      Link encap:Ethernet  HWaddr 82:XX:XX:38:XX:X0
rax2      Link encap:Ethernet  HWaddr 82:XX:XX:58:XX:X0

OpenWrt
root@OpenWrt:/# ifconfig |grep HW
br-lan    Link encap:Ethernet  HWaddr 80:XX:XX:08:XX:X0
eth0      Link encap:Ethernet  HWaddr 80:XX:XX:08:XX:X0
phy0-ap0  Link encap:Ethernet  HWaddr 80:XX:XX:08:XX:X0
phy1-ap0  Link encap:Ethernet  HWaddr 82:XX:XX:08:XX:X1

 tftp Installation via u-boot:

Connect TTL3.3V converter
connector is under the radiator Set speed 115200 8 N 1
Interrupt boot process by holding down-arrow key during boot then
>> 6. Load image
>> 0 - TFTP client (Default)
enter IP adresses and initramfs-kernel.bin

write to flash via sysupgrade or gui

Signed-off-by: Robert Senderek <robert.senderek@10g.pl>
(cherry picked from commit e8f75973172749874afa13e4f746acd8cb515de2)

target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface
target/linux/mediatek/dts/mt7981b-cudy-re3000-v1.dts [new file with mode: 0644]
target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
target/linux/mediatek/filogic/base-files/etc/board.d/02_network
target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
target/linux/mediatek/image/filogic.mk

index fd39b3f65f07dbeef5b976e50da1843352172af4..d45f20fe62072108c362be603a62252eda15544f 100644 (file)
@@ -4,6 +4,7 @@ set_preinit_iface() {
                ip link set eth1 up
                ifname=eth1
                ;;
+       cudy,re3000-v1|\
        ubnt,unifi-6-lr|\
        zyxel,nwa50ax-pro)
                ip link set eth0 up
diff --git a/target/linux/mediatek/dts/mt7981b-cudy-re3000-v1.dts b/target/linux/mediatek/dts/mt7981b-cudy-re3000-v1.dts
new file mode 100644 (file)
index 0000000..4025e5a
--- /dev/null
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "mt7981.dtsi"
+
+/ {
+       model = "Cudy RE3000 v1";
+       compatible = "cudy,re3000-v1", "mediatek,mt7981";
+
+       aliases {
+               serial0 = &uart0;
+               label-mac-device = &gmac1;
+               led-boot = &led_status;
+               led-failsafe = &led_status;
+               led-running = &led_status;
+               led-upgrade = &led_status;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+               };
+
+               wps {
+                       label = "wps";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_status: led@0 {
+                       function = LED_FUNCTION_STATUS;
+                       color = <LED_COLOR_ID_WHITE>;
+                       gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+               };
+
+               led@1 {
+                       label = "red:wifi5";
+                       gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+
+               led@2 {
+                       label = "white:wifi2";
+                       gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               led@3 {
+                       function = LED_FUNCTION_LAN;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+               };
+
+               led@4 {
+                       function = LED_FUNCTION_WPS;
+                       color = <LED_COLOR_ID_WHITE>;
+                       gpios = <&pio 11 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&watchdog {
+       status = "okay";
+};
+
+&eth {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mdio_pins>;
+       status = "okay";
+
+       gmac1: mac@1 {
+               compatible = "mediatek,eth-mac";
+               reg = <1>;
+               phy-mode = "gmii";
+               phy-handle = <&int_gbe_phy>;
+               nvmem-cell-names = "mac-address";
+               nvmem-cells = <&macaddr_bdinfo_de00 0>;
+       };
+};
+
+&mdio_bus {
+       switch: switch@1f {
+               compatible = "mediatek,mt7531";
+               reg = <31>;
+               reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
+       };
+};
+
+&spi0 {
+       status = "disabled";
+};
+
+&spi2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&spi2_flash_pins>;
+       status = "okay";
+
+       flash@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+
+               spi-max-frequency = <25000000>;
+               spi-tx-bus-width = <4>;
+               spi-rx-bus-width = <4>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@00000 {
+                               label = "BL2";
+                               reg = <0x00000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "u-boot-env";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@50000 {
+                               label = "Factory";
+                               reg = <0x50000 0x10000>;
+                               read-only;
+                               
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x1000>;
+                                       };
+                               };
+                       };
+
+                       bdinfo: partition@60000 {
+                               label = "bdinfo";
+                               reg = <0x60000 0x10000>;
+                               read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       macaddr_bdinfo_de00: macaddr@de00 {
+                                               compatible = "mac-base";
+                                               reg = <0xde00 0x6>;
+                                               #nvmem-cell-cells = <1>;
+                                       };
+                               };
+                       };
+
+                       partition@70000 {
+                               label = "FIP";
+                               reg = <0x70000 0x80000>;
+                               read-only;
+                       };
+
+                       partition@f0000 {
+                               compatible = "denx,fit";
+                               label = "firmware";
+                               reg = <0xf0000 0xf10000>;
+                       };
+               };
+       };
+};
+
+&pio {
+       spi2_flash_pins: spi2-pins {
+               mux {
+                       function = "spi";
+                       groups = "spi2", "spi2_wp_hold";
+               };
+
+               conf-pu {
+                       pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
+                       drive-strength = <8>;
+                       bias-pull-up = <103>;
+               };
+
+               conf-pd {
+                       pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+                       drive-strength = <8>;
+                       bias-pull-down = <103>;
+               };
+       };
+};
+
+&wifi {
+       status = "okay";
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
+};
index 75c8fcda9b8cc2c8e158e45697acb79f44018939..96793e39cd89eb2f8c15e2a0cba113982e0b5368 100644 (file)
@@ -12,6 +12,9 @@ confiabits,mt7981)
        ucidef_set_led_netdev "lan3" "lan3" "blue:lan-3" "lan3" "link tx rx"
        ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx"
        ;;
+cudy,re3000-v1)
+       ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0" "link tx rx"
+       ;;
 cudy,wr3000-v1)
        ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
        ;;
index a48fbbc79c0ea342a006f931ffd5e7a2235845f3..566a5ca82fef3653f2a6d45880caeca89ce3bf0a 100644 (file)
@@ -58,6 +58,7 @@ mediatek_setup_interfaces()
        mercusys,mr90x-v1)
                ucidef_set_interfaces_lan_wan "lan0 lan1 lan2" eth1
                ;;
+       cudy,re3000-v1|\
        netgear,wax220|\
        ubnt,unifi-6-plus|\
        zyxel,nwa50ax-pro)
index e6378dd49809eedc7a3c3764725283d06067dadd..3441b41861d4d3991f263b4787f63f23e6a21cd6 100644 (file)
@@ -57,6 +57,11 @@ case "$board" in
                esac
                [ "$PHYNBR" = "1" ] && echo "$addr" > /sys${DEVPATH}/macaddress
                ;;
+       cudy,re3000-v1)
+               addr=$(mtd_get_mac_binary bdinfo 0xde00)
+               [ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
+               [ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress
+               ;;
        cudy,wr3000-v1)
                addr=$(mtd_get_mac_binary bdinfo 0xde00)
                # Originally, phy0 is phy1 mac with LA bit set. However, this would conflict
index 9b3ebe92f15cb13779a7a4139f02de3c06d7f0d7..25cbf98f3374b3fddfe4a6fc32be5095d7695365 100755 (executable)
@@ -106,7 +106,8 @@ platform_do_upgrade() {
                        ;;
                esac
                ;;
-       cudy,wr3000-v1)
+       cudy,wr3000-v1|\
+       cudy,re3000-v1)
                default_do_upgrade "$1"
                ;;
        glinet,gl-mt6000)
index 7daac6a1fac9bade2047df606c402e3d9cb5ed3c..5598a70acae18c92ba72ef03c73c9622cf6d805b 100644 (file)
@@ -298,6 +298,25 @@ define Device/confiabits_mt7981
 endef
 TARGET_DEVICES += confiabits_mt7981
 
+define Device/cudy_re3000-v1
+  DEVICE_VENDOR := Cudy
+  DEVICE_MODEL := RE3000
+  DEVICE_VARIANT := v1
+  DEVICE_DTS := mt7981b-cudy-re3000-v1
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_DTS_LOADADDR := 0x47000000
+  IMAGES := sysupgrade.bin
+  IMAGE_SIZE := 15424k
+  SUPPORTED_DEVICES += R36
+  KERNEL := kernel-bin | lzma | \
+       fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+       fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
+endef
+TARGET_DEVICES += cudy_re3000-v1
+
 define Device/cudy_wr3000-v1
   DEVICE_VENDOR := Cudy
   DEVICE_MODEL := WR3000