brcm47xx: fix cpu clock detection on ASUS WL-520gU
authorHauke Mehrtens <hauke@hauke-m.de>
Sun, 25 Nov 2012 16:38:16 +0000 (16:38 +0000)
committerHauke Mehrtens <hauke@hauke-m.de>
Sun, 25 Nov 2012 16:38:16 +0000 (16:38 +0000)
The ASUS WL-520gU and some other similar Asus devices have a BCM5354
running at 200MHZ and not at 240 which is the default for this SoC.

This fixes #4083.

Backport of r34325.

SVN-Revision: 34377

target/linux/brcm47xx/patches-3.3/520-MIPS-BCM47XX-fix-time-for-WL520G-and-other-200-MHz-C.patch [new file with mode: 0644]

diff --git a/target/linux/brcm47xx/patches-3.3/520-MIPS-BCM47XX-fix-time-for-WL520G-and-other-200-MHz-C.patch b/target/linux/brcm47xx/patches-3.3/520-MIPS-BCM47XX-fix-time-for-WL520G-and-other-200-MHz-C.patch
new file mode 100644 (file)
index 0000000..2ae45e8
--- /dev/null
@@ -0,0 +1,44 @@
+--- a/arch/mips/bcm47xx/time.c
++++ b/arch/mips/bcm47xx/time.c
+@@ -27,10 +27,14 @@
+ #include <linux/ssb/ssb.h>
+ #include <asm/time.h>
+ #include <bcm47xx.h>
++#include <nvram.h>
+ void __init plat_time_init(void)
+ {
+       unsigned long hz = 0;
++      u16 chip_id = 0;
++      char buf[10];
++      int len;
+       /*
+        * Use deterministic values for initial counter interrupt
+@@ -43,15 +47,26 @@ void __init plat_time_init(void)
+ #ifdef CONFIG_BCM47XX_SSB
+       case BCM47XX_BUS_TYPE_SSB:
+               hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
++              chip_id = bcm47xx_bus.ssb.chip_id;
+               break;
+ #endif
+ #ifdef CONFIG_BCM47XX_BCMA
+       case BCM47XX_BUS_TYPE_BCMA:
+               hz = bcma_cpu_clock(&bcm47xx_bus.bcma.bus.drv_mips) / 2;
++              chip_id = bcm47xx_bus.bcma.bus.chipinfo.id;
+               break;
+ #endif
+       }
++      if (chip_id == 0x5354) {
++              len = nvram_getenv("clkfreq", buf, sizeof(buf));
++              if (len >= 0 && !strncmp(buf, "200", 4))
++                      hz = 100000000;
++              len = nvram_getenv("hardware_version", buf, sizeof(buf));
++              if (len >= 0 && !strncmp(buf, "WL520G", 6))
++                      hz = 100000000;
++
++      }
+       if (!hz)
+               hz = 100000000;