Convert GL-AP1300 to DSA and enable it.
While working on it rename the GL-AP1300 leds from green to white.
Tested-by: Rob White <rob@blue-wave.net>
Tested-by: Robert Sommer <frauhottelmann@gmail.com>
Signed-off-by: Nick Hainke <vincent@systemli.org>
ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
;;
glinet,gl-ap1300)
ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
;;
glinet,gl-ap1300)
- ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
+ ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan"
;;
glinet,gl-b1300 |\
mikrotik,lhgg-60ad)
;;
glinet,gl-b1300 |\
mikrotik,lhgg-60ad)
asus,map-ac2200|\
cilab,meshpoint-one|\
edgecore,ecw5211|\
asus,map-ac2200|\
cilab,meshpoint-one|\
edgecore,ecw5211|\
glinet,gl-b2200|\
google,wifi|\
linksys,whw03v2|\
glinet,gl-b2200|\
google,wifi|\
linksys,whw03v2|\
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
- label-mac-device = &gmac0;
compatible = "gpio-leds";
led_power: power {
compatible = "gpio-leds";
led_power: power {
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
wan {
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
wan {
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
};
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
};
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
+ macaddr_art_0: mac-address@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_art_6: mac-address@6 {
+ reg = <0x6 0x6>;
+ };
+
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
+&gmac {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport4 {
+ status = "okay";
+ label = "lan";
+
+ nvmem-cells = <&macaddr_art_0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&swport5 {
+ status = "okay";
+ label = "wan";
+
+ nvmem-cells = <&macaddr_art_6>;
+ nvmem-cell-names = "mac-address";
+};
+
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
KERNEL_INSTALL := 1
DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
endef
KERNEL_INSTALL := 1
DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
endef
-# Missing DSA Setup
-#TARGET_DEVICES += glinet_gl-ap1300
+TARGET_DEVICES += glinet_gl-ap1300
define Device/glinet_gl-b1300
$(call Device/FitzImage)
define Device/glinet_gl-b1300
$(call Device/FitzImage)