ramips: Add support for Cudy WR1300 v3

[openwrt/staging/hauke.git] / target / linux / ramips / dts / mt7621_cudy_wr1300-v2.dts

diff --git a/target/linux/ramips/dts/mt7621_cudy_wr1300-v2.dts b/target/linux/ramips/dts/mt7621_cudy_wr1300-v2.dts
index a4a148f53b9ef0283ff9a337af9c75cc92735481..a33279e596d8c51e3e663747204991cc07f95487 100644 (file)
--- a/target/linux/ramips/dts/mt7621_cudy_wr1300-v2.dts
+++ b/target/linux/ramips/dts/mt7621_cudy_wr1300-v2.dts
@@ -1,143 +1,19 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "mt7621.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
+#include "mt7621_cudy_wr1300-v2v3.dtsi"
 
 / {
        compatible = "cudy,wr1300-v2", "mediatek,mt7621-soc";
        model = "Cudy WR1300 v2";
-
-       aliases {
-               led-boot = &led_sys;
-               led-failsafe = &led_sys;
-               led-running = &led_sys;
-               led-upgrade = &led_sys;
-               label-mac-device = &gmac0;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,115200";
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led_sys: sys {
-                       label = "green:sys";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-               };
-
-               wps {
-                       label = "green:wps";
-                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&spi0 {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <40000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x30000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "u-boot-env";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       factory: partition@40000 {
-                               compatible = "nvmem-cells";
-                               label = "factory";
-                               reg = <0x40000 0x10000>;
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               read-only;
-
-                               eeprom_factory_0: eeprom@0 {
-                                       reg = <0x0 0x400>;
-                               };
-
-                               eeprom_factory_8000: eeprom@8000 {
-                                       reg = <0x8000 0x4da8>;
-                               };
-                       };
-
-                       partition@50000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x50000 0xf80000>;
-                       };
-
-                       partition@fd0000 {
-                               label = "debug";
-                               reg = <0xfd0000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@fe0000 {
-                               label = "backup";
-                               reg = <0xfe0000 0x10000>;
-                               read-only;
-                       };
-
-                       bdinfo: partition@ff0000 {
-                               compatible = "nvmem-cells";
-                               label = "bdinfo";
-                               reg = <0xff0000 0x10000>;
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               read-only;
-
-                               macaddr_bdinfo_de00: macaddr@de00 {
-                                       reg = <0xde00 0x6>;
-                               };
-                       };
-               };
-       };
-};
-
-&pcie {
-       status = "okay";
 };
 
 &pcie1 {
        wifi@0,0 {
                compatible = "mediatek,mt76";
                reg = <0x0000 0 0 0 0>;
-               nvmem-cells = <&eeprom_factory_0>, <&macaddr_bdinfo_de00>;
+               nvmem-cells = <&eeprom_factory_0>, <&macaddr_bdinfo_de00 0>;
                nvmem-cell-names = "eeprom", "mac-address";
+               ieee80211-freq-limit = <2400000 2500000>;
        };
 };
 
@@ -145,60 +21,8 @@
        wifi@0,0 {
                compatible = "mediatek,mt76";
                reg = <0x0000 0 0 0 0>;
-               nvmem-cells = <&eeprom_factory_8000>, <&macaddr_bdinfo_de00>;
+               nvmem-cells = <&eeprom_factory_8000>, <&macaddr_bdinfo_de00 2>;
                nvmem-cell-names = "eeprom", "mac-address";
-               mac-address-increment = <2>;
-       };
-};
-
-&gmac0 {
-       nvmem-cells = <&macaddr_bdinfo_de00>;
-       nvmem-cell-names = "mac-address";
-};
-
-&gmac1 {
-       status = "okay";
-       label = "wan";
-       phy-handle = <&ethphy4>;
-
-       nvmem-cells = <&macaddr_bdinfo_de00>;
-       nvmem-cell-names = "mac-address";
-       mac-address-increment = <1>;
-};
-
-&mdio {
-       ethphy4: ethernet-phy@4 {
-               reg = <4>;
-       };
-};
-
-&switch0 {
-       ports {
-               port@0 {
-                       status = "okay";
-                       label = "lan4";
-               };
-
-               port@1 {
-                       status = "okay";
-                       label = "lan3";
-               };
-
-               port@2 {
-                       status = "okay";
-                       label = "lan2";
-               };
-
-               port@3 {
-                       status = "okay";
-                       label = "lan1";
-               };
-       };
-};
-
-&state_default {
-       gpio {
-               groups = "wdt", "i2c", "jtag";
-               function = "gpio";
+               ieee80211-freq-limit = <5000000 6000000>;
        };
 };