ath79: fix dts whitespace

[openwrt/staging/aparcar.git] / target / linux / ath79 / dts / qca9563_tplink_deco-m4r-v1.dts

diff --git a/target/linux/ath79/dts/qca9563_tplink_deco-m4r-v1.dts b/target/linux/ath79/dts/qca9563_tplink_deco-m4r-v1.dts
index 4b2d80aa8271b58952f7e081ab4f190a36a2a8a4..8cd9004bd3fb378e4b9f986449e44e22318c6b84 100644 (file)
--- a/target/linux/ath79/dts/qca9563_tplink_deco-m4r-v1.dts
+++ b/target/linux/ath79/dts/qca9563_tplink_deco-m4r-v1.dts
@@ -24,7 +24,7 @@
                        gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy1tpt";
                };
-               
+
                led_power: power {
                        label = "green:power";
                        gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
@@ -41,7 +41,7 @@
 
        keys {
                compatible = "gpio-keys";
-               
+
                reset {
                        label = "Reset button";
                        linux,code = <KEY_RESTART>;
@@ -83,19 +83,19 @@
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;
-                       
+
                        uboot: partition@0 {
                                label = "u-boot";
                                reg = <0x000000 0x080000>;
                                read-only;
                        };
-                       
+
                        partition@80000 {
                                compatible = "denx,uimage";
                                label = "firmware";
                                reg = <0x080000 0xe00000>;
                        };
-                       
+
                        partition@e80000 {
                                label = "product-info";
                                reg = <0xe80000 0x05000>;
@@ -107,7 +107,7 @@
                                reg = <0xe85000 0x16b000>;
                                read-only;
                        };
-                       
+
                        art: partition@ff0000 {
                                label = "art";
                                reg = <0xff0000 0x010000>;
@@ -122,7 +122,7 @@
 
        phy-mode = "sgmii";
        phy-handle = <&phy0>;
-       
+
        nvmem-cells = <&macaddr_config_8>;
        nvmem-cell-names = "mac-address";
 };