target/linux/ramips/dts/mt7628an_wiznet_wizfi630s.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "wiznet,wizfi630s", "mediatek,mt7628an-soc";
  10         model = "WIZnet WizFi630S";
  11
  12         chosen {
  13                 bootargs = "console=ttyS1,115200";
  14         };
  15
  16         aliases {
  17                 led-boot = &led_run;
  18                 led-failsafe = &led_run;
  19                 led-running = &led_run;
  20                 led-upgrade = &led_run;
  21                 serial0 = &uart1;
  22                 serial1 = &uartlite;
  23         };
  24
  25         leds {
  26                 compatible = "gpio-leds";
  27
  28                 led_run: run {
  29                         label = "green:run";
  30                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  31                 };
  32
  33                 ledwps {
  34                         label = "green:wps";
  35                         gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 leduart1 {
  39                         label = "green:uart1";
  40                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 leduart2 {
  44                         label = "green:uart2";
  45                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  46                 };
  47         };
  48
  49         keys {
  50                 compatible = "gpio-keys";
  51
  52                 #address-cells = <1>;
  53                 #size-cells = <0>;
  54
  55                 reset {
  56                         label = "reset";
  57                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  58                         linux,code = <KEY_RESTART>;
  59                 };
  60
  61                 wps {
  62                         label = "wps";
  63                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
  64                         linux,code = <KEY_WPS_BUTTON>;
  65                 };
  66
  67                 scm1 {
  68                         label = "SCM1";
  69                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  70                         linux,code = <BTN_1>;
  71                         linux,input-type = <EV_SW>;
  72                 };
  73
  74                 scm2 {
  75                         label = "SCM2";
  76                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  77                         linux,code = <BTN_2>;
  78                         linux,input-type = <EV_SW>;
  79                 };
  80         };
  81 };
  82
  83 &state_default {
  84         gpio {
  85                 groups = "gpio", "i2s", "i2c", "wdt", "refclk", "p1led_an", "p2led_an";
  86                 function = "gpio";
  87         };
  88 };
  89
  90 &spi0 {
  91         status = "okay";
  92
  93         pinctrl-names = "default";
  94         pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
  95
  96         flash@0 {
  97                 compatible = "jedec,spi-nor";
  98                 reg = <0>;
  99                 spi-max-frequency = <40000000>;
 100                 broken-flash-reset;
 101
 102                 partitions {
 103                         compatible = "fixed-partitions";
 104                         #address-cells = <1>;
 105                         #size-cells = <1>;
 106
 107                         partition@0 {
 108                                 label = "u-boot";
 109                                 reg = <0x0 0x30000>;
 110                                 read-only;
 111                         };
 112
 113                         partition@30000 {
 114                                 label = "u-boot-env";
 115                                 reg = <0x30000 0x10000>;
 116                                 read-only;
 117                         };
 118
 119                         factory: partition@40000 {
 120                                 label = "factory";
 121                                 reg = <0x40000 0x10000>;
 122                                 read-only;
 123
 124                                 nvmem-layout {
 125                                         compatible = "fixed-layout";
 126                                         #address-cells = <1>;
 127                                         #size-cells = <1>;
 128
 129                                         eeprom_factory_0: eeprom@0 {
 130                                                 reg = <0x0 0x400>;
 131                                         };
 132
 133                                         macaddr_factory_2e: macaddr@2e {
 134                                                 reg = <0x2e 0x6>;
 135                                         };
 136                                 };
 137                         };
 138
 139                         partition@50000 {
 140                                 compatible = "denx,uimage";
 141                                 label = "firmware";
 142                                 reg = <0x50000 0x1fb0000>;
 143                         };
 144                 };
 145         };
 146 };
 147
 148 &uart1 {
 149         status = "okay";
 150 };
 151
 152 &uart2 {
 153         status = "okay";
 154 };
 155
 156 &pwm {
 157         status = "okay";
 158 };
 159
 160 &ethernet {
 161         nvmem-cells = <&macaddr_factory_2e>;
 162         nvmem-cell-names = "mac-address";
 163 };
 164
 165 &esw {
 166         mediatek,portmap = <0x3e>;
 167         mediatek,portdisable = <0x26>;
 168 };
 169
 170 &sdhci {
 171         status = "okay";
 172         mediatek,cd-high;
 173 };
 174
 175 &wmac {
 176         status = "okay";
 177
 178         nvmem-cells = <&eeprom_factory_0>;
 179         nvmem-cell-names = "eeprom";
 180 };