eea070a03ad3e69c2a3598b3474309c6e5d425c1
[openwrt/staging/hauke.git] / target / linux / ramips / dts / mt7628an_glinet_vixmini_microuter.dtsi
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2
3 #include "mt7628an.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 aliases {
10 led-boot = &led_power_blue;
11 led-failsafe = &led_power_blue;
12 led-running = &led_power_blue;
13 led-upgrade = &led_power_blue;
14
15 label-mac-device = &ethernet;
16 };
17
18 chosen {
19 bootargs = "console=ttyS0,115200";
20 };
21
22 leds {
23 compatible = "gpio-leds";
24
25 led_power_blue: power {
26 label = "blue:power";
27 gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
28 };
29
30 wlan {
31 label = "white:wlan";
32 gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
33 linux,default-trigger = "phy0tpt";
34 };
35 };
36
37 keys {
38 compatible = "gpio-keys";
39
40 reset {
41 label = "reset";
42 gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
43 linux,code = <KEY_RESTART>;
44 };
45 };
46 };
47
48 &state_default {
49 gpio {
50 groups = "wdt", "wled_an", "p1led_an";
51 function = "gpio";
52 };
53 };
54
55 &ethernet {
56 nvmem-cells = <&macaddr_factory_4>;
57 nvmem-cell-names = "mac-address";
58 };
59
60 &wmac {
61 status = "okay";
62
63 nvmem-cells = <&eeprom_factory_0>;
64 nvmem-cell-names = "eeprom";
65 };
66
67 &spi0 {
68 status = "okay";
69
70 flash@0 {
71 compatible = "jedec,spi-nor";
72 reg = <0>;
73 spi-max-frequency = <10000000>;
74
75 partitions: partitions {
76 compatible = "fixed-partitions";
77 #address-cells = <1>;
78 #size-cells = <1>;
79
80 partition@0 {
81 label = "u-boot";
82 reg = <0x0 0x30000>;
83 read-only;
84 };
85
86 partition@30000 {
87 label = "u-boot-env";
88 reg = <0x30000 0x10000>;
89 read-only;
90 };
91
92 factory: partition@40000 {
93 compatible = "nvmem-cells";
94 label = "factory";
95 reg = <0x40000 0x10000>;
96 #address-cells = <1>;
97 #size-cells = <1>;
98 read-only;
99
100 eeprom_factory_0: eeprom@0 {
101 reg = <0x0 0x400>;
102 };
103
104 macaddr_factory_4: macaddr@4 {
105 reg = <0x4 0x6>;
106 };
107 };
108
109 /*
110 * Firmware-partition size is model-specific
111 * due to different flash sizes.
112 */
113 firmware_part: partition@50000 {
114 compatible = "denx,uimage";
115 label = "firmware";
116 };
117 };
118 };
119 };