ramips: mt7620a: convert to nvmem-layout
[openwrt/staging/hauke.git] / target / linux / ramips / dts / mt7620a_tplink_archer.dtsi
1 #include "mt7620a.dtsi"
2
3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/gpio/gpio.h>
5
6 / {
7 chosen {
8 bootargs = "console=ttyS0,115200";
9 };
10
11 keys {
12 compatible = "gpio-keys";
13
14 reset {
15 label = "reset";
16 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
17 linux,code = <KEY_RESTART>;
18 };
19
20 rfkill {
21 label = "rfkill";
22 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
23 linux,code = <KEY_RFKILL>;
24 };
25 };
26 };
27
28 &gpio1 {
29 status = "okay";
30 };
31
32 &gpio2 {
33 status = "okay";
34 };
35
36 &gpio3 {
37 status = "okay";
38 };
39
40 &spi0 {
41 status = "okay";
42
43 flash@0 {
44 compatible = "jedec,spi-nor";
45 reg = <0>;
46 spi-max-frequency = <30000000>;
47
48 partitions {
49 compatible = "fixed-partitions";
50 #address-cells = <1>;
51 #size-cells = <1>;
52
53 partition@0 {
54 label = "u-boot";
55 reg = <0x0 0x20000>;
56 read-only;
57 };
58
59 partition@20000 {
60 compatible = "tplink,firmware";
61 label = "firmware";
62 reg = <0x20000 0x7a0000>;
63 };
64
65 partition@7c0000 {
66 label = "config";
67 reg = <0x7c0000 0x10000>;
68 read-only;
69 };
70
71 rom: partition@7d0000 {
72 label = "rom";
73 reg = <0x7d0000 0x10000>;
74 read-only;
75
76 nvmem-layout {
77 compatible = "fixed-layout";
78 #address-cells = <1>;
79 #size-cells = <1>;
80
81 macaddr_rom_f100: macaddr@f100 {
82 reg = <0xf100 0x6>;
83 };
84 };
85 };
86
87 partition@7e0000 {
88 label = "romfile";
89 reg = <0x7e0000 0x10000>;
90 read-only;
91 };
92
93 radio: partition@7f0000 {
94 label = "radio";
95 reg = <0x7f0000 0x10000>;
96 read-only;
97
98 nvmem-layout {
99 compatible = "fixed-layout";
100 #address-cells = <1>;
101 #size-cells = <1>;
102
103 eeprom_radio_0: eeprom@0 {
104 reg = <0x0 0x200>;
105 };
106
107 eeprom_radio_8000: eeprom@8000 {
108 reg = <0x8000 0x200>;
109 };
110 };
111 };
112 };
113 };
114 };
115
116 &ethernet {
117 pinctrl-names = "default";
118
119 nvmem-cells = <&macaddr_rom_f100>;
120 nvmem-cell-names = "mac-address";
121
122 mediatek,portmap = "wllll";
123 };
124
125 &ehci {
126 status = "okay";
127 };
128
129 &ohci {
130 status = "okay";
131 };
132
133 &wmac {
134 nvmem-cells = <&eeprom_radio_0>;
135 nvmem-cell-names = "eeprom";
136 };
137
138 &pcie {
139 status = "okay";
140 };
141
142 &pcie0 {
143 wifi: mt76@0,0 {
144 reg = <0x0000 0 0 0 0>;
145 nvmem-cells = <&eeprom_radio_8000>;
146 nvmem-cell-names = "eeprom";
147 ieee80211-freq-limit = <5000000 6000000>;
148 };
149 };