From e405b96fe774fbad9c4c465f41ad853a970439bf Mon Sep 17 00:00:00 2001 From: Lech Perczak Date: Mon, 22 Jan 2024 00:14:16 +0100 Subject: [PATCH] ath79: ubnt-bullet-m-xw: fix Ethernet PHY traffic Since commit 6f2e1b7485f0 ("ath79: disable delays on AT803X config init") Ubiquiti XW boards equipped with AR8035 PHY suffered from lack of outbound traffic on the Ethernet port. This was caused by the fact, the U-boot has set this during boot and it wasn't reset by the PHY driver, and the corresponding setting in device tree was wrong. Set the 'phy-mode = "rgmii-txid"' at the ð0, and drop this property from PHY node, as it is not parsed there. This causes the device to connect using Ethernet once again. Fixes: db4b6535f837 ("ath79: Add support for Ubiquity Bullet M (XW)") Fixes: 6f2e1b7485f0 ("ath79: disable delays on AT803X config init") Signed-off-by: Lech Perczak --- target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts b/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts index 16d27dc0167..ee734286252 100644 --- a/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts +++ b/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts @@ -11,7 +11,6 @@ status = "okay"; phy4: ethernet-phy@4 { - phy-mode = "rgmii"; reg = <4>; max-speed = <100>; }; @@ -20,7 +19,7 @@ ð0 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; phy-handle = <&phy4>; gmac-config { -- 2.30.2