--- /dev/null
+/*
+ * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <crypto/sha_dma.h>
+#include <lib/mmio.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+#include <string.h>
+
+#include "aml_private.h"
+
+#define SIZE_SHIFT 20
+#define SIZE_MASK 0x1FF
+#define SIZE_FWBLK 0x200UL
+
+/*
+ * Note: The Amlogic SCP firmware uses the legacy SCPI protocol.
+ */
+#define SCPI_CMD_SET_CSS_POWER_STATE 0x04
+#define SCPI_CMD_SET_SYS_POWER_STATE 0x08
+
+#define SCPI_CMD_JTAG_SET_STATE 0xC0
+#define SCPI_CMD_EFUSE_READ 0xC2
+
+#define SCPI_CMD_COPY_FW 0xd4
+#define SCPI_CMD_SET_FW_ADDR 0xd3
+#define SCPI_CMD_FW_SIZE 0xd2
+
+static inline uint32_t scpi_cmd(uint32_t command, uint32_t size)
+{
+ return command | (size << SIZE_SHIFT);
+}
+
+static void scpi_secure_message_send(uint32_t command, uint32_t size)
+{
+ mhu_secure_message_send(scpi_cmd(command, size));
+}
+
+uint32_t scpi_secure_message_receive(void **message_out, size_t *size_out)
+{
+ uint32_t response = mhu_secure_message_wait();
+
+ size_t size = (response >> SIZE_SHIFT) & SIZE_MASK;
+
+ response &= ~(SIZE_MASK << SIZE_SHIFT);
+
+ if (size_out != NULL)
+ *size_out = size;
+
+ if (message_out != NULL)
+ *message_out = (void *)GXBB_MHU_SECURE_SCP_TO_AP_PAYLOAD;
+
+ return response;
+}
+
+void scpi_set_css_power_state(u_register_t mpidr, uint32_t cpu_state,
+ uint32_t cluster_state, uint32_t css_state)
+{
+ uint32_t state = (mpidr & 0x0F) | /* CPU ID */
+ ((mpidr & 0xF00) >> 4) | /* Cluster ID */
+ (cpu_state << 8) |
+ (cluster_state << 12) |
+ (css_state << 16);
+
+ mhu_secure_message_start();
+ mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD, state);
+ mhu_secure_message_send(scpi_cmd(SCPI_CMD_SET_CSS_POWER_STATE, 4));
+ mhu_secure_message_wait();
+ mhu_secure_message_end();
+}
+
+uint32_t scpi_sys_power_state(uint64_t system_state)
+{
+ uint32_t *response;
+ size_t size;
+
+ mhu_secure_message_start();
+ mmio_write_8(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD, system_state);
+ mhu_secure_message_send(scpi_cmd(SCPI_CMD_SET_SYS_POWER_STATE, 1));
+ scpi_secure_message_receive((void *)&response, &size);
+ mhu_secure_message_end();
+
+ return *response;
+}
+
+void scpi_jtag_set_state(uint32_t state, uint8_t select)
+{
+ assert(state <= GXBB_JTAG_STATE_OFF);
+
+ if (select > GXBB_JTAG_A53_EE) {
+ WARN("BL31: Invalid JTAG select (0x%x).\n", select);
+ return;
+ }
+
+ mhu_secure_message_start();
+ mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD,
+ (state << 8) | (uint32_t)select);
+ mhu_secure_message_send(scpi_cmd(SCPI_CMD_JTAG_SET_STATE, 4));
+ mhu_secure_message_wait();
+ mhu_secure_message_end();
+}
+
+uint32_t scpi_efuse_read(void *dst, uint32_t base, uint32_t size)
+{
+ uint32_t *response;
+ size_t resp_size;
+
+ if (size > 0x1FC)
+ return 0;
+
+ mhu_secure_message_start();
+ mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD, base);
+ mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD + 4, size);
+ mhu_secure_message_send(scpi_cmd(SCPI_CMD_EFUSE_READ, 8));
+ scpi_secure_message_receive((void *)&response, &resp_size);
+ mhu_secure_message_end();
+
+ /*
+ * response[0] is the size of the response message.
+ * response[1 ... N] are the contents.
+ */
+ if (*response != 0)
+ memcpy(dst, response + 1, *response);
+
+ return *response;
+}
+
+void scpi_unknown_thermal(uint32_t arg0, uint32_t arg1,
+ uint32_t arg2, uint32_t arg3)
+{
+ mhu_secure_message_start();
+ mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD + 0x0, arg0);
+ mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD + 0x4, arg1);
+ mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD + 0x8, arg2);
+ mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD + 0xC, arg3);
+ mhu_secure_message_send(scpi_cmd(0xC3, 16));
+ mhu_secure_message_wait();
+ mhu_secure_message_end();
+}
+
+static inline void scpi_copy_scp_data(uint8_t *data, size_t len)
+{
+ void *dst = (void *)GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD;
+ size_t sz;
+
+ mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD, len);
+ scpi_secure_message_send(SCPI_CMD_FW_SIZE, len);
+ mhu_secure_message_wait();
+
+ for (sz = 0; sz < len; sz += SIZE_FWBLK) {
+ memcpy(dst, data + sz, MIN(SIZE_FWBLK, len - sz));
+ mhu_secure_message_send(SCPI_CMD_COPY_FW);
+ }
+}
+
+static inline void scpi_set_scp_addr(uint64_t addr, size_t len)
+{
+ volatile uint64_t *dst = (uint64_t *)GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD;
+
+ /*
+ * It is ok as GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD is mapped as
+ * non cachable
+ */
+ *dst = addr;
+ scpi_secure_message_send(SCPI_CMD_SET_FW_ADDR, sizeof(addr));
+ mhu_secure_message_wait();
+
+ mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD, len);
+ scpi_secure_message_send(SCPI_CMD_FW_SIZE, len);
+ mhu_secure_message_wait();
+}
+
+static inline void scpi_send_fw_hash(uint8_t hash[], size_t len)
+{
+ void *dst = (void *)GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD;
+
+ memcpy(dst, hash, len);
+ mhu_secure_message_send(0xd0);
+ mhu_secure_message_send(0xd1);
+ mhu_secure_message_send(0xd5);
+ mhu_secure_message_end();
+}
+
+/**
+ * Upload a FW to SCP.
+ *
+ * @param addr: firmware data address
+ * @param size: size of firmware
+ * @param send: If set, actually copy the firmware in SCP memory otherwise only
+ * send the firmware address.
+ */
+void scpi_upload_scp_fw(uintptr_t addr, size_t size, int send)
+{
+ struct asd_ctx ctx;
+
+ asd_sha_init(&ctx, ASM_SHA256);
+ asd_sha_update(&ctx, (void *)addr, size);
+ asd_sha_finalize(&ctx);
+
+ mhu_secure_message_start();
+ if (send == 0)
+ scpi_set_scp_addr(addr, size);
+ else
+ scpi_copy_scp_data((void *)addr, size);
+
+ scpi_send_fw_hash(ctx.digest, sizeof(ctx.digest));
+}
--- /dev/null
+/*
+ * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef GXBB_PRIVATE_H
+#define GXBB_PRIVATE_H
+
+#include <stddef.h>
+#include <stdint.h>
+
+/* Utility functions */
+unsigned int plat_gxbb_calc_core_pos(u_register_t mpidr);
+void gxbb_console_init(void);
+void gxbb_setup_page_tables(void);
+
+/* MHU functions */
+void mhu_secure_message_start(void);
+void mhu_secure_message_send(uint32_t msg);
+uint32_t mhu_secure_message_wait(void);
+void mhu_secure_message_end(void);
+void mhu_secure_init(void);
+
+/* SCPI functions */
+void scpi_set_css_power_state(u_register_t mpidr, uint32_t cpu_state,
+ uint32_t cluster_state, uint32_t css_state);
+uint32_t scpi_sys_power_state(uint64_t system_state);
+void scpi_jtag_set_state(uint32_t state, uint8_t select);
+uint32_t scpi_efuse_read(void *dst, uint32_t base, uint32_t size);
+void scpi_unknown_thermal(uint32_t arg0, uint32_t arg1,
+ uint32_t arg2, uint32_t arg3);
+void scpi_upload_scp_fw(uintptr_t addr, size_t size, int send);
+
+/* Peripherals */
+void gxbb_thermal_unknown(void);
+uint64_t gxbb_efuse_read(void *dst, uint32_t offset, uint32_t size);
+uint64_t gxbb_efuse_user_max(void);
+
+#endif /* GXBB_PRIVATE_H */
+++ /dev/null
-/*
- * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#include <assert.h>
-#include <string.h>
-
-#include <platform_def.h>
-
-#include <lib/mmio.h>
-#include <plat/common/platform.h>
-
-#include "gxbb_private.h"
-
-#define SIZE_SHIFT 20
-#define SIZE_MASK 0x1FF
-
-/*
- * Note: The Amlogic SCP firmware uses the legacy SCPI protocol.
- */
-#define SCPI_CMD_SET_CSS_POWER_STATE 0x04
-#define SCPI_CMD_SET_SYS_POWER_STATE 0x08
-
-#define SCPI_CMD_JTAG_SET_STATE 0xC0
-#define SCPI_CMD_EFUSE_READ 0xC2
-
-static inline uint32_t scpi_cmd(uint32_t command, uint32_t size)
-{
- return command | (size << SIZE_SHIFT);
-}
-
-void scpi_secure_message_send(uint32_t command, uint32_t size)
-{
- mhu_secure_message_send(scpi_cmd(command, size));
-}
-
-uint32_t scpi_secure_message_receive(void **message_out, size_t *size_out)
-{
- uint32_t response = mhu_secure_message_wait();
-
- size_t size = (response >> SIZE_SHIFT) & SIZE_MASK;
-
- response &= ~(SIZE_MASK << SIZE_SHIFT);
-
- if (size_out != NULL)
- *size_out = size;
-
- if (message_out != NULL)
- *message_out = (void *)GXBB_MHU_SECURE_SCP_TO_AP_PAYLOAD;
-
- return response;
-}
-
-void scpi_set_css_power_state(u_register_t mpidr, uint32_t cpu_state,
- uint32_t cluster_state, uint32_t css_state)
-{
- uint32_t state = (mpidr & 0x0F) | /* CPU ID */
- ((mpidr & 0xF00) >> 4) | /* Cluster ID */
- (cpu_state << 8) |
- (cluster_state << 12) |
- (css_state << 16);
-
- mhu_secure_message_start();
- mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD, state);
- mhu_secure_message_send(scpi_cmd(SCPI_CMD_SET_CSS_POWER_STATE, 4));
- mhu_secure_message_wait();
- mhu_secure_message_end();
-}
-
-uint32_t scpi_sys_power_state(uint64_t system_state)
-{
- uint32_t *response;
- size_t size;
-
- mhu_secure_message_start();
- mmio_write_8(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD, system_state);
- mhu_secure_message_send(scpi_cmd(SCPI_CMD_SET_SYS_POWER_STATE, 1));
- scpi_secure_message_receive((void *)&response, &size);
- mhu_secure_message_end();
-
- return *response;
-}
-
-void scpi_jtag_set_state(uint32_t state, uint8_t select)
-{
- assert(state <= GXBB_JTAG_STATE_OFF);
-
- if (select > GXBB_JTAG_A53_EE) {
- WARN("BL31: Invalid JTAG select (0x%x).\n", select);
- return;
- }
-
- mhu_secure_message_start();
- mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD,
- (state << 8) | (uint32_t)select);
- mhu_secure_message_send(scpi_cmd(SCPI_CMD_JTAG_SET_STATE, 4));
- mhu_secure_message_wait();
- mhu_secure_message_end();
-}
-
-uint32_t scpi_efuse_read(void *dst, uint32_t base, uint32_t size)
-{
- uint32_t *response;
- size_t resp_size;
-
- if (size > 0x1FC)
- return 0;
-
- mhu_secure_message_start();
- mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD, base);
- mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD + 4, size);
- mhu_secure_message_send(scpi_cmd(SCPI_CMD_EFUSE_READ, 8));
- scpi_secure_message_receive((void *)&response, &resp_size);
- mhu_secure_message_end();
-
- /*
- * response[0] is the size of the response message.
- * response[1 ... N] are the contents.
- */
- if (*response != 0)
- memcpy(dst, response + 1, *response);
-
- return *response;
-}
-
-void scpi_unknown_thermal(uint32_t arg0, uint32_t arg1,
- uint32_t arg2, uint32_t arg3)
-{
- mhu_secure_message_start();
- mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD + 0x0, arg0);
- mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD + 0x4, arg1);
- mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD + 0x8, arg2);
- mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD + 0xC, arg3);
- mhu_secure_message_send(scpi_cmd(0xC3, 16));
- mhu_secure_message_wait();
- mhu_secure_message_end();
-}
AML_PLAT_SOC := ${AML_PLAT}/${PLAT}
AML_PLAT_COMMON := ${AML_PLAT}/common
-PLAT_INCLUDES := -I${AML_PLAT_SOC}/include
+PLAT_INCLUDES := -Iinclude/drivers/amlogic/ \
+ -I${AML_PLAT_SOC}/include \
+ -I${AML_PLAT_COMMON}/include
GIC_SOURCES := drivers/arm/gic/common/gic_common.c \
drivers/arm/gic/v2/gicv2_main.c \
${AML_PLAT_SOC}/gxbb_efuse.c \
${AML_PLAT_SOC}/gxbb_mhu.c \
${AML_PLAT_SOC}/gxbb_pm.c \
- ${AML_PLAT_SOC}/gxbb_scpi.c \
+ ${AML_PLAT_COMMON}/aml_scpi.c \
${AML_PLAT_SOC}/gxbb_sip_svc.c \
${AML_PLAT_SOC}/gxbb_thermal.c \
${GIC_SOURCES}
+++ /dev/null
-/*
- * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#include <assert.h>
-#include <lib/mmio.h>
-#include <plat/common/platform.h>
-#include <platform_def.h>
-#include <string.h>
-#include <crypto/sha_dma.h>
-
-#include "gxl_private.h"
-
-#define SIZE_SHIFT 20
-#define SIZE_MASK 0x1FF
-#define SIZE_FWBLK 0x200UL
-
-/*
- * Note: The Amlogic SCP firmware uses the legacy SCPI protocol.
- */
-#define SCPI_CMD_SET_CSS_POWER_STATE 0x04
-#define SCPI_CMD_SET_SYS_POWER_STATE 0x08
-
-#define SCPI_CMD_JTAG_SET_STATE 0xC0
-#define SCPI_CMD_EFUSE_READ 0xC2
-
-#define SCPI_CMD_COPY_FW 0xd4
-#define SCPI_CMD_SET_FW_ADDR 0xd3
-#define SCPI_CMD_FW_SIZE 0xd2
-
-static inline uint32_t scpi_cmd(uint32_t command, uint32_t size)
-{
- return command | (size << SIZE_SHIFT);
-}
-
-static void scpi_secure_message_send(uint32_t command, uint32_t size)
-{
- mhu_secure_message_send(scpi_cmd(command, size));
-}
-
-uint32_t scpi_secure_message_receive(void **message_out, size_t *size_out)
-{
- uint32_t response = mhu_secure_message_wait();
-
- size_t size = (response >> SIZE_SHIFT) & SIZE_MASK;
-
- response &= ~(SIZE_MASK << SIZE_SHIFT);
-
- if (size_out != NULL)
- *size_out = size;
-
- if (message_out != NULL)
- *message_out = (void *)GXBB_MHU_SECURE_SCP_TO_AP_PAYLOAD;
-
- return response;
-}
-
-void scpi_set_css_power_state(u_register_t mpidr, uint32_t cpu_state,
- uint32_t cluster_state, uint32_t css_state)
-{
- uint32_t state = (mpidr & 0x0F) | /* CPU ID */
- ((mpidr & 0xF00) >> 4) | /* Cluster ID */
- (cpu_state << 8) |
- (cluster_state << 12) |
- (css_state << 16);
-
- mhu_secure_message_start();
- mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD, state);
- mhu_secure_message_send(scpi_cmd(SCPI_CMD_SET_CSS_POWER_STATE, 4));
- mhu_secure_message_wait();
- mhu_secure_message_end();
-}
-
-uint32_t scpi_sys_power_state(uint64_t system_state)
-{
- uint32_t *response;
- size_t size;
-
- mhu_secure_message_start();
- mmio_write_8(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD, system_state);
- mhu_secure_message_send(scpi_cmd(SCPI_CMD_SET_SYS_POWER_STATE, 1));
- scpi_secure_message_receive((void *)&response, &size);
- mhu_secure_message_end();
-
- return *response;
-}
-
-void scpi_jtag_set_state(uint32_t state, uint8_t select)
-{
- assert(state <= GXBB_JTAG_STATE_OFF);
-
- if (select > GXBB_JTAG_A53_EE) {
- WARN("BL31: Invalid JTAG select (0x%x).\n", select);
- return;
- }
-
- mhu_secure_message_start();
- mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD,
- (state << 8) | (uint32_t)select);
- mhu_secure_message_send(scpi_cmd(SCPI_CMD_JTAG_SET_STATE, 4));
- mhu_secure_message_wait();
- mhu_secure_message_end();
-}
-
-uint32_t scpi_efuse_read(void *dst, uint32_t base, uint32_t size)
-{
- uint32_t *response;
- size_t resp_size;
-
- if (size > 0x1FC)
- return 0;
-
- mhu_secure_message_start();
- mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD, base);
- mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD + 4, size);
- mhu_secure_message_send(scpi_cmd(SCPI_CMD_EFUSE_READ, 8));
- scpi_secure_message_receive((void *)&response, &resp_size);
- mhu_secure_message_end();
-
- /*
- * response[0] is the size of the response message.
- * response[1 ... N] are the contents.
- */
- if (*response != 0)
- memcpy(dst, response + 1, *response);
-
- return *response;
-}
-
-void scpi_unknown_thermal(uint32_t arg0, uint32_t arg1,
- uint32_t arg2, uint32_t arg3)
-{
- mhu_secure_message_start();
- mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD + 0x0, arg0);
- mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD + 0x4, arg1);
- mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD + 0x8, arg2);
- mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD + 0xC, arg3);
- mhu_secure_message_send(scpi_cmd(0xC3, 16));
- mhu_secure_message_wait();
- mhu_secure_message_end();
-}
-
-static inline void scpi_copy_scp_data(uint8_t *data, size_t len)
-{
- void *dst = (void *)GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD;
- size_t sz;
-
- mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD, len);
- scpi_secure_message_send(SCPI_CMD_FW_SIZE, len);
- mhu_secure_message_wait();
-
- for (sz = 0; sz < len; sz += SIZE_FWBLK) {
- memcpy(dst, data + sz, MIN(SIZE_FWBLK, len - sz));
- mhu_secure_message_send(SCPI_CMD_COPY_FW);
- }
-}
-
-static inline void scpi_set_scp_addr(uint64_t addr, size_t len)
-{
- volatile uint64_t *dst = (uint64_t *)GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD;
-
- /*
- * It is ok as GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD is mapped as
- * non cachable
- */
- *dst = addr;
- scpi_secure_message_send(SCPI_CMD_SET_FW_ADDR, sizeof(addr));
- mhu_secure_message_wait();
-
- mmio_write_32(GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD, len);
- scpi_secure_message_send(SCPI_CMD_FW_SIZE, len);
- mhu_secure_message_wait();
-}
-
-static inline void scpi_send_fw_hash(uint8_t hash[], size_t len)
-{
- void *dst = (void *)GXBB_MHU_SECURE_AP_TO_SCP_PAYLOAD;
-
- memcpy(dst, hash, len);
- mhu_secure_message_send(0xd0);
- mhu_secure_message_send(0xd1);
- mhu_secure_message_send(0xd5);
- mhu_secure_message_end();
-}
-
-/**
- * Upload a FW to SCP.
- *
- * @param addr: firmware data address
- * @param size: size of firmware
- * @param send: If set, actually copy the firmware in SCP memory otherwise only
- * send the firmware address.
- */
-void scpi_upload_scp_fw(uintptr_t addr, size_t size, int send)
-{
- struct asd_ctx ctx;
-
- asd_sha_init(&ctx, ASM_SHA256);
- asd_sha_update(&ctx, (void *)addr, size);
- asd_sha_finalize(&ctx);
-
- mhu_secure_message_start();
- if (send == 0)
- scpi_set_scp_addr(addr, size);
- else
- scpi_copy_scp_data((void *)addr, size);
-
- scpi_send_fw_hash(ctx.digest, sizeof(ctx.digest));
-}
DOIMAGETOOL ?= ${DOIMAGEPATH}/doimage
PLAT_INCLUDES := -Iinclude/drivers/amlogic/ \
- -I${AML_PLAT_SOC}/include
+ -I${AML_PLAT_SOC}/include \
+ -I${AML_PLAT_COMMON}/include
GIC_SOURCES := drivers/arm/gic/common/gic_common.c \
drivers/arm/gic/v2/gicv2_main.c \
${AML_PLAT_SOC}/gxl_efuse.c \
${AML_PLAT_SOC}/gxl_mhu.c \
${AML_PLAT_SOC}/gxl_pm.c \
- ${AML_PLAT_SOC}/gxl_scpi.c \
+ ${AML_PLAT_COMMON}/aml_scpi.c \
${AML_PLAT_SOC}/gxl_sip_svc.c \
${AML_PLAT_SOC}/gxl_thermal.c \
drivers/amlogic/crypto/sha_dma.c \
projects / project / bcm63xx / atf.git / commitdiff