ipq40xx: convert Cisco Meraki MR33 to DSA

This patch converts the Cisco Meraki MR33 to use ipqess + qca8k's DSA.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index 13588d8af8a5add4807b1a5b20c743beb1447a99..e269d44af42637d39830f66d4b34460baff2e93e 100755 (executable)
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -25,7 +25,6 @@ ipq40xx_setup_interfaces()
        dlink,dap-2610 |\
        engenius,eap1300|\
        engenius,emd1|\
-       meraki,mr33|\
        netgear,ex6100v2|\
        netgear,ex6150v2|\
        zyxel,wre6606)
@@ -93,6 +92,9 @@ ipq40xx_setup_interfaces()
                        "0u@eth0" "3:lan:2" "4:lan:1"
                ucidef_set_interface_wan "eth1"
                ;;
+       meraki,mr33)
+               ucidef_set_interface_lan "lan"
+               ;;
        qxwlan,e2600ac-c1 |\
        qxwlan,e2600ac-c2)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"

diff --git a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
index 66c815ba19c7bef50c89f17e4b6b914d8601ec85..28d5bb3d40be24699be06a3830a442bb91fef88d 100644 (file)
--- a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
+++ b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
@@ -30,8 +30,7 @@ preinit_set_mac_address() {
                ip link set dev eth1 address $(macaddr_add "${base_mac}" 1)
                ;;
        meraki,mr33)
-               mac_lan=$(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66)
-               [ -n "$mac_lan" ] && ip link set dev eth0 address "$mac_lan"
+               lan_mac=$(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66)
                ;;
        zyxel,nbg6617)
                base_mac=$(cat /sys/class/net/eth0/address)

diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
index 50035724200e73e9f4409e22e38184fed2a76c21..8a21fdaa1c551425883efaf87fec96445fb725ce 100644 (file)
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
@@ -26,6 +26,7 @@
                led-failsafe = &status_red;
                led-running = &status_green;
                led-upgrade = &power_orange;
+               ethernet0 = &gmac;
        };
 
        /* Do we really need this defined? */
@@ -39,12 +40,6 @@
                        status = "okay";
                };
 
-               mdio@90000 {
-                       status = "okay";
-                       pinctrl-0 = <&mdio_pins>;
-                       pinctrl-names = "default";
-               };
-
                /* It is a 56-bit counter that supplies the count to the ARM arch
                   timers and without upstream driver */
                counter@4a1000 {
@@ -52,12 +47,6 @@
                        reg = <0x4a1000 0x4>;
                };
 
-               ess_tcsr@1953000 {
-                       compatible = "qcom,tcsr";
-                       reg = <0x1953000 0x1000>;
-                       qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
-               };
-
                tcsr@1949000 {
                        compatible = "qcom,tcsr";
                        reg = <0x1949000 0x100>;
@@ -88,19 +77,6 @@
                watchdog@b017000 {
                        status = "okay";
                };
-
-               ess-switch@c000000 {
-                       switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
-                       switch_lan_bmp = <0x0>; /* lan port bitmap */
-                       switch_wan_bmp = <0x10>; /* wan port bitmap */
-               };
-
-               edma@c080000 {
-                       qcom,single-phy;
-                       qcom,num_gmac = <1>;
-                       phy-mode = "rgmii-rxid";
-                       status = "okay";
-               };
        };
 
        keys {
@@ -138,10 +114,32 @@
        status = "okay";
 };
 
-&gmac0 {
-       qcom,phy_mdio_addr = <1>;
-       qcom,poll_required = <1>;
-       vlan_tag = <0 0x20>;
+&mdio {
+       status = "okay";
+       pinctrl-0 = <&mdio_pins>;
+       pinctrl-names = "default";
+};
+
+&ess {
+       mac-mode = <0x3>; /* mac mode for RGMII RMII */
+       status = "okay";
+
+       ports {
+               /delete-node/ port@1;
+               /delete-node/ port@2;
+               /delete-node/ port@3;
+               /delete-node/ port@4;
+
+               port@5 {
+                       phy-mode = "rgmii-rxid";
+                       phy-handle = <&ethphy1>;
+                       label = "lan";
+               };
+       };
+};
+
+&gmac {
+       status = "okay";
 };
 
 &blsp1_i2c3 {