--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2017 Yousong Zhou <yszhou4tech@gmail.com>
+
+include $(TOPDIR)/rules.mk
+
+BOARD:=armsr
+BOARDNAME:=Arm SystemReady (EFI) compliant
+FEATURES:=fpu pci pcie rtc usb boot-part rootfs-part
+FEATURES+=cpiogz ext4 ramdisk squashfs targz vmdk
+
+KERNEL_PATCHVER:=5.15
+
+include $(INCLUDE_DIR)/target.mk
+
+DEFAULT_PACKAGES += mkf2fs e2fsprogs
+# blkid used for resolving PARTUUID
+# in sysupgrade
+DEFAULT_PACKAGES += blkid
+
+$(eval $(call BuildTarget))
--- /dev/null
+This target generates images that can be used on ARM machines with EFI
+support (e.g EDKII/TianoCore or U-Boot with bootefi).
+
+There are two subtargets:
+- armv7 for 32-bit machines
+- armv8 for 64-bit machines
+
+The kernel and filesystem images can also be used directly by QEMU:
+
+Run with qemu-system-arm
+
+ # boot with initramfs embedded in
+ qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armsr-armv7-generic-initramfs-kernel.bin
+
+ # boot with accel=kvm
+ qemu-system-arm -nographic -M virt,accel=kvm -cpu host -m 64 -kernel
+ openwrt-armsr-armv7-generic-initramfs-kernel.bin
+
+ # boot with a separate rootfs
+ qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armsr-armv7-generic-kernel.bin \
+ -drive file=openwrt-armsr-armv7-generic-ext4-rootfs.img,format=raw,if=virtio -append 'root=/dev/vda rootwait'
+
+ # boot with local dir as rootfs
+ qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armsr-armv7-generic-kernel.bin \
+ -fsdev local,id=rootdev,path=root-armsr/,security_model=none \
+ -device virtio-9p-pci,fsdev=rootdev,mount_tag=/dev/root \
+ -append 'rootflags=trans=virtio,version=9p2000.L,cache=loose rootfstype=9p'
+
+Run with kvmtool
+
+ # start a named machine
+ lkvm run -k openwrt-armsr-armv7-zImage -i openwrt-armsr-armv7-rootfs.cpio --name armsr0
+
+ # start with virtio-9p rootfs
+ lkvm run -k openwrt-armsr-armv7-zImage -d root-armsr/
+
+ # stop "armsr0"
+ lkvm stop --name armsr0
+
+ # stop all
+ lkvm stop --all
+
+The multi-platform ARMv8 target can be used with QEMU:
+
+ qemu-system-aarch64 -machine virt -cpu cortex-a57 -nographic \
+ -kernel openwrt-armsr-armv8-generic-initramfs-kernel.bin \
+
+With a EDKII or U-Boot binary for the QEMU ARM virtual machines, you can use these
+images in EFI mode:
+
+32-bit:
+gunzip -c bin/targets/armsr/armv7/openwrt-armsr-armv7-generic-ext4-combined.img.gz > openwrt-arm-32.img
+qemu-system-arm -nographic \
+ -cpu cortex-a15 -machine virt \
+ -bios QEMU_EFI_32.fd \
+ -smp 1 -m 1024 \
+ -device virtio-rng-pci \
+ -drive file=openwrt-arm-32.img,format=raw,index=0,media=disk \
+ -netdev user,id=testlan -net nic,netdev=testlan \
+ -netdev user,id=testwan -net nic,netdev=testwan
+
+64-bit:
+gunzip -c bin/targets/armsr/armv8/openwrt-armsr-armv8-generic-ext4-combined.img.gz > openwrt-arm-64.img
+qemu-system-aarch64 -nographic \
+ -cpu cortex-a53 -machine virt \
+ -bios QEMU_EFI_64.fd \
+ -smp 1 -m 1024 \
+ -device virtio-rng-pci \
+ -drive file=openwrt-arm-64.img,format=raw,index=0,media=disk \
+ -netdev user,id=testlan -net nic,netdev=testlan \
+ -netdev user,id=testwan -net nic,netdev=testwan
+
+One can find EFI/BIOS binaries from:
+- Compile mainline U-Boot for the QEMU ARM virtual machine (qemu_arm_defconfig/qemu_arm64_defconfig)
+- From distribution packages (such as qemu-efi-arm and qemu-efi-aarch64 in Debian)
+- Community builds, like retrage/edk2-nightly: https://retrage.github.io/edk2-nightly/
--- /dev/null
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_MMAP_RND_BITS=8
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_VIRT=y
+CONFIG_ARM=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_HEAVY_MB=y
+# CONFIG_ARM_HIGHBANK_CPUIDLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_ARM_LPAE=y
+CONFIG_ARM_PATCH_IDIV=y
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_PSCI=y
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
+CONFIG_CACHE_L2X0=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_SPECTRE=y
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+CONFIG_DMA_OPS=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_VDSO_32=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_HAVE_SMP=y
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_NEON=y
+CONFIG_NR_CPUS=4
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_RTC_MC146818_LIB=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SWP_EMULATE=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_UNWINDER_ARM=y
+CONFIG_USE_OF=y
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0
--- /dev/null
+ARCH:=arm
+SUBTARGET:=armv7
+BOARDNAME:=32-bit (armv7) machines
+CPU_TYPE:=cortex-a15
+CPU_SUBTYPE:=neon-vfpv4
+KERNELNAME:=zImage
+
+define Target/Description
+ Build images for $(BOARDNAME)
+endef
--- /dev/null
+CONFIG_64BIT=y
+CONFIG_ARCH_HISI=y
+CONFIG_ARCH_INTEL_SOCFPGA=y
+CONFIG_ARCH_LAYERSCAPE=y
+CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=24
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_MXC=y
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ARCH_STACKWALK=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_SYNQUACER=y
+CONFIG_ARCH_THUNDER=y
+CONFIG_ARCH_THUNDER2=y
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_ARCH_WANTS_NO_INSTR=y
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_ARM64=y
+CONFIG_ARM64_4K_PAGES=y
+CONFIG_ARM64_CNP=y
+CONFIG_ARM64_CRYPTO=y
+CONFIG_ARM64_EPAN=y
+CONFIG_ARM64_ERRATUM_1165522=y
+CONFIG_ARM64_ERRATUM_1286807=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_826319=y
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_843419=y
+CONFIG_ARM64_HW_AFDBM=y
+CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
+CONFIG_ARM64_PAGE_SHIFT=12
+CONFIG_ARM64_PAN=y
+CONFIG_ARM64_PA_BITS=48
+CONFIG_ARM64_PA_BITS_48=y
+CONFIG_ARM64_PTR_AUTH=y
+CONFIG_ARM64_PTR_AUTH_KERNEL=y
+CONFIG_ARM64_SVE=y
+CONFIG_ARM64_TAGGED_ADDR_ABI=y
+CONFIG_ARM64_VA_BITS=48
+CONFIG_ARM64_VA_BITS_48=y
+CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
+CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
+CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
+# CONFIG_ARMADA_37XX_RWTM_MBOX is not set
+CONFIG_ARMADA_37XX_WATCHDOG=y
+CONFIG_ARMADA_THERMAL=y
+CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
+# CONFIG_ARM_DMC620_PMU is not set
+# CONFIG_ARM_MHU_V2 is not set
+CONFIG_ARM_SBSA_WATCHDOG=y
+CONFIG_ARM_SMC_WATCHDOG=y
+CONFIG_ARM_SMMU=y
+# CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT is not set
+# CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS is not set
+CONFIG_ARM_SMMU_V3=y
+# CONFIG_ARM_SMMU_V3_PMU is not set
+# CONFIG_ARM_SMMU_V3_SVA is not set
+CONFIG_AT803X_PHY=y
+CONFIG_ATA=y
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+# CONFIG_AXI_DMAC is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BLK_PM=y
+CONFIG_CAVIUM_TX2_ERRATUM_219=y
+CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
+CONFIG_CLK_IMX8MM=y
+CONFIG_CLK_IMX8MN=y
+CONFIG_CLK_IMX8MP=y
+CONFIG_CLK_IMX8MQ=y
+CONFIG_CLK_INTEL_SOCFPGA=y
+CONFIG_CLK_INTEL_SOCFPGA64=y
+CONFIG_CLK_LS1028A_PLLDIG=y
+CONFIG_CLK_PX30=y
+CONFIG_CLK_QORIQ=y
+CONFIG_CLK_RK3308=y
+CONFIG_CLK_RK3328=y
+CONFIG_CLK_RK3368=y
+CONFIG_CLK_RK3399=y
+CONFIG_CLK_RK3568=y
+CONFIG_CLK_SP810=y
+CONFIG_CLK_SUNXI=y
+CONFIG_CLK_SUNXI_CLOCKS=y
+# CONFIG_CLK_SUNXI_PRCM_SUN6I is not set
+# CONFIG_CLK_SUNXI_PRCM_SUN8I is not set
+# CONFIG_CLK_SUNXI_PRCM_SUN9I is not set
+CONFIG_CLK_VEXPRESS_OSC=y
+# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
+# CONFIG_COMMON_CLK_FSL_SAI is not set
+CONFIG_COMMON_CLK_HI3516CV300=y
+CONFIG_COMMON_CLK_HI3519=y
+CONFIG_COMMON_CLK_HI3559A=y
+CONFIG_COMMON_CLK_HI3660=y
+CONFIG_COMMON_CLK_HI3670=y
+CONFIG_COMMON_CLK_HI3798CV200=y
+CONFIG_COMMON_CLK_HI6220=y
+CONFIG_COMMON_CLK_HI655X=y
+CONFIG_COMMON_CLK_ROCKCHIP=y
+CONFIG_COMMON_CLK_SCPI=y
+CONFIG_COMMON_CLK_ZYNQMP=y
+CONFIG_COMMON_RESET_HI3660=y
+CONFIG_COMMON_RESET_HI6220=y
+# CONFIG_COMPAT_32BIT_TIME is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_PM=y
+CONFIG_CRYPTO_AES_ARM64=y
+CONFIG_CRYPTO_AES_ARM64_BS=y
+CONFIG_CRYPTO_AES_ARM64_CE=y
+CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
+CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y
+CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=y
+CONFIG_CRYPTO_BLAKE2S=y
+CONFIG_CRYPTO_CHACHA20=y
+CONFIG_CRYPTO_CHACHA20_NEON=y
+CONFIG_CRYPTO_CRYPTD=y
+# CONFIG_CRYPTO_DEV_ALLWINNER is not set
+# CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM is not set
+# CONFIG_CRYPTO_DEV_HISI_HPRE is not set
+# CONFIG_CRYPTO_DEV_HISI_SEC2 is not set
+# CONFIG_CRYPTO_DEV_HISI_TRNG is not set
+# CONFIG_CRYPTO_DEV_OCTEONTX2_CPT is not set
+# CONFIG_CRYPTO_DEV_ROCKCHIP is not set
+# CONFIG_CRYPTO_DEV_ZYNQMP_AES is not set
+CONFIG_CRYPTO_GHASH_ARM64_CE=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_ARM64_CE=y
+CONFIG_CRYPTO_SHA256_ARM64=y
+CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_SHA512_ARM64=y
+CONFIG_CRYPTO_SIMD=y
+CONFIG_DMA_DIRECT_REMAP=y
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_DMA_SUN6I=y
+CONFIG_DRM=y
+CONFIG_DRM_BOCHS=y
+CONFIG_DRM_BRIDGE=y
+CONFIG_DRM_GEM_SHMEM_HELPER=y
+# CONFIG_DRM_IMX_DCSS is not set
+CONFIG_DRM_KMS_HELPER=y
+CONFIG_DRM_PANEL=y
+CONFIG_DRM_PANEL_BRIDGE=y
+CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
+CONFIG_DRM_QXL=y
+CONFIG_DRM_TTM=y
+CONFIG_DRM_TTM_HELPER=y
+CONFIG_DRM_VIRTIO_GPU=y
+CONFIG_DRM_VRAM_HELPER=y
+# CONFIG_DWMAC_SUN8I is not set
+# CONFIG_DWMAC_SUNXI is not set
+CONFIG_DW_WATCHDOG=y
+CONFIG_ENA_ETHERNET=y
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_CMDLINE=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_MX3 is not set
+# CONFIG_FB_XILINX is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FSL_DPAA is not set
+# CONFIG_FSL_DPAA2_QDMA is not set
+CONFIG_FSL_ERRATUM_A008585=y
+# CONFIG_FSL_IMX8_DDR_PMU is not set
+# CONFIG_FSL_PQ_MDIO is not set
+CONFIG_FUJITSU_ERRATUM_010001=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+# CONFIG_GIANFAR is not set
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_MPC8XXX=y
+CONFIG_GPIO_MXC=y
+CONFIG_GPIO_ROCKCHIP=y
+CONFIG_GPIO_THUNDERX=y
+CONFIG_GPIO_XLP=y
+CONFIG_GPIO_ZYNQ=y
+CONFIG_HDMI=y
+CONFIG_HI3660_MBOX=y
+CONFIG_HI6220_MBOX=y
+CONFIG_HISILICON_LPC=y
+CONFIG_HISI_PMU=y
+CONFIG_HISI_THERMAL=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_ARM_SMCCC_TRNG=y
+# CONFIG_HW_RANDOM_HISI is not set
+CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_ALTERA=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_HIX5HD2 is not set
+CONFIG_I2C_IMX=y
+CONFIG_I2C_IMX_LPI2C=y
+CONFIG_I2C_SYNQUACER=y
+CONFIG_I2C_THUNDERX=y
+# CONFIG_I2C_XLP9XX is not set
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_IMX2_WDT=y
+CONFIG_IMX7ULP_WDT=y
+# CONFIG_IMX8MM_THERMAL is not set
+# CONFIG_IMX_DMA is not set
+# CONFIG_IMX_DSP is not set
+CONFIG_IMX_IRQSTEER=y
+CONFIG_IMX_MBOX=y
+# CONFIG_IMX_SCU is not set
+CONFIG_IMX_SDMA=y
+# CONFIG_IMX_WEIM is not set
+# CONFIG_INPUT_HISI_POWERKEY is not set
+# CONFIG_INTEL_STRATIX10_RSU is not set
+# CONFIG_INTEL_STRATIX10_SERVICE is not set
+CONFIG_INTERCONNECT=y
+CONFIG_INTERCONNECT_IMX=y
+CONFIG_INTERCONNECT_IMX8MM=y
+CONFIG_INTERCONNECT_IMX8MN=y
+CONFIG_INTERCONNECT_IMX8MQ=y
+# CONFIG_IOMMU_DEBUGFS is not set
+# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
+CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
+CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
+CONFIG_IOMMU_SUPPORT=y
+# CONFIG_K3_DMA is not set
+CONFIG_KCMP=y
+# CONFIG_KEYBOARD_SUN4I_LRADC is not set
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_MAILBOX_TEST is not set
+CONFIG_MDIO_SUN4I=y
+# CONFIG_MFD_ALTERA_A10SR is not set
+CONFIG_MFD_ALTERA_SYSMGR=y
+# CONFIG_MFD_AXP20X_RSB is not set
+CONFIG_MFD_CORE=y
+CONFIG_MFD_HI655X_PMIC=y
+# CONFIG_MFD_KHADAS_MCU is not set
+CONFIG_MFD_SUN4I_GPADC=y
+# CONFIG_MFD_SUN6I_PRCM is not set
+CONFIG_MFD_SYSCON=y
+CONFIG_MFD_VEXPRESS_SYSREG=y
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_CAVIUM_THUNDERX=y
+CONFIG_MMC_DW=y
+# CONFIG_MMC_DW_BLUEFIELD is not set
+# CONFIG_MMC_DW_EXYNOS is not set
+# CONFIG_MMC_DW_HI3798CV200 is not set
+# CONFIG_MMC_DW_K3 is not set
+# CONFIG_MMC_DW_PCI is not set
+CONFIG_MMC_DW_PLTFM=y
+CONFIG_MMC_DW_ROCKCHIP=y
+# CONFIG_MMC_MXC is not set
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MMC_SDHCI_CADENCE=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
+CONFIG_MMC_SDHCI_PCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SUNXI=y
+CONFIG_MODULES_USE_ELF_RELA=y
+# CONFIG_MV_XOR is not set
+# CONFIG_MX3_IPU is not set
+CONFIG_MXS_DMA=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+# CONFIG_NET_VENDOR_ALLWINNER is not set
+CONFIG_NO_HZ=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=64
+CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y
+# CONFIG_NVMEM_IMX_IIM is not set
+CONFIG_NVMEM_IMX_OCOTP=y
+CONFIG_NVMEM_IMX_OCOTP_SCU=y
+# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
+CONFIG_NVMEM_ROCKCHIP_EFUSE=y
+# CONFIG_NVMEM_ROCKCHIP_OTP is not set
+# CONFIG_NVMEM_SNVS_LPGPR is not set
+# CONFIG_NVMEM_SUNXI_SID is not set
+# CONFIG_NVMEM_ZYNQMP is not set
+CONFIG_PCC=y
+CONFIG_PCIE_HISI_STB=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_PCIE_MOBIVEIL_PLAT=y
+CONFIG_PCIE_ROCKCHIP=y
+# CONFIG_PCIE_ROCKCHIP_DW_HOST is not set
+CONFIG_PCIE_ROCKCHIP_HOST=y
+CONFIG_PCIE_XILINX_CPM=y
+CONFIG_PCIE_XILINX_NWL=y
+CONFIG_PCI_AARDVARK=y
+CONFIG_PCI_IMX6=y
+CONFIG_PCI_LAYERSCAPE=y
+CONFIG_PHY_FSL_IMX8MQ_USB=y
+CONFIG_PHY_HI3660_USB=y
+CONFIG_PHY_HI3670_USB=y
+CONFIG_PHY_HI6220_USB=y
+CONFIG_PHY_HISI_INNO_USB2=y
+# CONFIG_PHY_HISTB_COMBPHY is not set
+CONFIG_PHY_MVEBU_A3700_COMPHY=y
+CONFIG_PHY_MVEBU_A3700_UTMI=y
+CONFIG_PHY_MVEBU_A38X_COMPHY=y
+CONFIG_PHY_MVEBU_CP110_COMPHY=y
+# CONFIG_PHY_ROCKCHIP_DP is not set
+# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
+CONFIG_PHY_ROCKCHIP_EMMC=y
+# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
+# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
+# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_PCIE=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
+# CONFIG_PHY_ROCKCHIP_USB is not set
+CONFIG_PHY_SUN4I_USB=y
+CONFIG_PHY_SUN50I_USB3=y
+# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
+CONFIG_PHY_SUN9I_USB=y
+# CONFIG_PHY_XILINX_ZYNQMP is not set
+CONFIG_PINCTRL_IMX8MM=y
+CONFIG_PINCTRL_IMX8MN=y
+CONFIG_PINCTRL_IMX8MP=y
+CONFIG_PINCTRL_IMX8MQ=y
+CONFIG_PINCTRL_IMX8ULP=y
+CONFIG_PINCTRL_ROCKCHIP=y
+CONFIG_PINCTRL_SUN4I_A10=y
+CONFIG_PINCTRL_SUN50I_A100=y
+CONFIG_PINCTRL_SUN50I_A100_R=y
+CONFIG_PINCTRL_SUN50I_A64=y
+CONFIG_PINCTRL_SUN50I_A64_R=y
+CONFIG_PINCTRL_SUN50I_H5=y
+CONFIG_PINCTRL_SUN50I_H6=y
+CONFIG_PINCTRL_SUN50I_H616=y
+CONFIG_PINCTRL_SUN50I_H616_R=y
+CONFIG_PINCTRL_SUN50I_H6_R=y
+CONFIG_PINCTRL_SUN5I=y
+# CONFIG_PINCTRL_SUN6I_A31 is not set
+# CONFIG_PINCTRL_SUN6I_A31_R is not set
+# CONFIG_PINCTRL_SUN8I_A23 is not set
+# CONFIG_PINCTRL_SUN8I_A23_R is not set
+# CONFIG_PINCTRL_SUN8I_A33 is not set
+# CONFIG_PINCTRL_SUN8I_A83T is not set
+# CONFIG_PINCTRL_SUN8I_A83T_R is not set
+# CONFIG_PINCTRL_SUN8I_H3 is not set
+# CONFIG_PINCTRL_SUN8I_H3_R is not set
+# CONFIG_PINCTRL_SUN8I_V3S is not set
+# CONFIG_PINCTRL_SUN9I_A80 is not set
+# CONFIG_PINCTRL_SUN9I_A80_R is not set
+CONFIG_PINCTRL_ZYNQMP=y
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+CONFIG_PM_GENERIC_DOMAINS=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_HISI=y
+CONFIG_POWER_RESET_VEXPRESS=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_QORIQ_THERMAL=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_ANATOP=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_HI655X=y
+CONFIG_REGULATOR_PFUZE100=y
+# CONFIG_REGULATOR_VEXPRESS is not set
+CONFIG_RESET_IMX7=y
+CONFIG_ROCKCHIP_IODOMAIN=y
+CONFIG_ROCKCHIP_IOMMU=y
+# CONFIG_ROCKCHIP_MBOX is not set
+CONFIG_ROCKCHIP_PM_DOMAINS=y
+# CONFIG_ROCKCHIP_SARADC is not set
+# CONFIG_ROCKCHIP_THERMAL is not set
+CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
+# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
+# CONFIG_RTC_DRV_IMXDI is not set
+CONFIG_RTC_DRV_MV=y
+# CONFIG_RTC_DRV_MXC is not set
+# CONFIG_RTC_DRV_MXC_V2 is not set
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_HOST=y
+# CONFIG_SERIAL_8250_EXAR is not set
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_IMX_EARLYCON=y
+CONFIG_SERIAL_MVEBU_CONSOLE=y
+CONFIG_SERIAL_MVEBU_UART=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+# CONFIG_SMC91X is not set
+# CONFIG_SND_SUN4I_I2S is not set
+# CONFIG_SND_SUN50I_CODEC_ANALOG is not set
+# CONFIG_SND_SUN50I_DMIC is not set
+# CONFIG_SND_SUN8I_CODEC is not set
+# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
+# CONFIG_SNI_NETSEC is not set
+CONFIG_SOC_IMX8M=y
+CONFIG_SPARSEMEM=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPI_ARMADA_3700=y
+# CONFIG_SPI_FSL_LPSPI is not set
+# CONFIG_SPI_FSL_QUADSPI is not set
+# CONFIG_SPI_HISI_KUNPENG is not set
+# CONFIG_SPI_HISI_SFC is not set
+# CONFIG_SPI_HISI_SFC_V3XX is not set
+# CONFIG_SPI_IMX is not set
+# CONFIG_SPI_ROCKCHIP_SFC is not set
+# CONFIG_SPI_SUN4I is not set
+# CONFIG_SPI_SUN6I is not set
+# CONFIG_SPI_SYNQUACER is not set
+CONFIG_SPI_THUNDERX=y
+# CONFIG_SPI_XLP is not set
+CONFIG_STUB_CLK_HI3660=y
+CONFIG_STUB_CLK_HI6220=y
+CONFIG_SUN50I_A100_CCU=y
+CONFIG_SUN50I_A100_R_CCU=y
+CONFIG_SUN50I_A64_CCU=y
+CONFIG_SUN50I_H616_CCU=y
+CONFIG_SUN50I_H6_CCU=y
+CONFIG_SUN50I_H6_R_CCU=y
+CONFIG_SUN50I_IOMMU=y
+CONFIG_SUN6I_MSGBOX=y
+# CONFIG_SUN8I_A83T_CCU is not set
+CONFIG_SUN8I_DE2_CCU=y
+# CONFIG_SUN8I_H3_CCU is not set
+CONFIG_SUN8I_R_CCU=y
+CONFIG_SUN8I_THERMAL=y
+CONFIG_SUNXI_CCU=y
+CONFIG_SUNXI_RSB=y
+CONFIG_SUNXI_WATCHDOG=y
+CONFIG_SYNC_FILE=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+# CONFIG_TCG_TIS_SYNQUACER is not set
+CONFIG_THREAD_INFO_IN_TASK=y
+# CONFIG_TURRIS_MOX_RWTM is not set
+CONFIG_TYPEC=y
+# CONFIG_TYPEC_DP_ALTMODE is not set
+# CONFIG_TYPEC_FUSB302 is not set
+# CONFIG_TYPEC_HD3SS3220 is not set
+# CONFIG_TYPEC_MUX_PI3USB30532 is not set
+# CONFIG_TYPEC_RT1711H is not set
+# CONFIG_TYPEC_STUSB160X is not set
+CONFIG_TYPEC_TCPCI=y
+# CONFIG_TYPEC_TCPCI_MAXIM is not set
+CONFIG_TYPEC_TCPM=y
+# CONFIG_TYPEC_TPS6598X is not set
+CONFIG_UNMAP_KERNEL_AT_EL0=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_CHIPIDEA_IMX=y
+CONFIG_USB_CHIPIDEA_MSM=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_DUAL_ROLE=y
+CONFIG_USB_DWC3_HAPS=y
+CONFIG_USB_DWC3_IMX8MP=y
+CONFIG_USB_DWC3_OF_SIMPLE=y
+CONFIG_USB_DWC3_XILINX=y
+CONFIG_USB_EHCI_FSL=y
+# CONFIG_USB_EHCI_HCD_ORION is not set
+CONFIG_USB_MXS_PHY=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_HISTB=y
+CONFIG_USB_XHCI_MVEBU=y
+CONFIG_USB_XHCI_PLATFORM=y
+CONFIG_VEXPRESS_CONFIG=y
+CONFIG_VIDEOMODE_HELPERS=y
+# CONFIG_VIDEO_SUN4I_CSI is not set
+# CONFIG_VIDEO_SUN6I_CSI is not set
+CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
+# CONFIG_VIRTIO_IOMMU is not set
+CONFIG_VMAP_STACK=y
+CONFIG_WDAT_WDT=y
+# CONFIG_XILINX_AMS is not set
+# CONFIG_XILINX_INTC is not set
+CONFIG_ZONE_DMA32=y
+CONFIG_ZYNQMP_FIRMWARE=y
+# CONFIG_ZYNQMP_FIRMWARE_DEBUG is not set
+CONFIG_ZYNQMP_PM_DOMAINS=y
+CONFIG_ZYNQMP_POWER=y
--- /dev/null
+ARCH:=aarch64
+SUBTARGET:=armv8
+BOARDNAME:=64-bit (armv8) machines
+
+define Target/Description
+ Build multi-platform images for the ARMv8 instruction set architecture
+endef
--- /dev/null
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+traverse,ten64)
+ ucidef_set_led_netdev "sfp1" "SFP 1" "ten64:green:sfp1:down" "eth8" "link tx rx"
+ ucidef_set_led_netdev "sfp2" "SFP 2" "ten64:green:sfp2:up" "eth9" "link tx rx"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+ traverse,ten64)
+ ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
+ ucidef_set_interface_wan "eth6"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+traverse,ten64)
+ ucidef_add_gpio_switch "lte_reset" "Cell Modem Reset" "376"
+ ucidef_add_gpio_switch "lte_power" "Cell Modem Power" "377"
+ ucidef_add_gpio_switch "lte_disable" "Cell Modem Airplane mode" "378"
+ ucidef_add_gpio_switch "gnss_disable" "Cell Modem Disable GNSS receiver" "379"
+ ucidef_add_gpio_switch "lower_sfp_txidsable" "Lower SFP+ TX Disable" "369"
+ ucidef_add_gpio_switch "upper_sfp_txdisable" "Upper SFP+ TX Disable" "373"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K shutdown
+ttyAMA0::askfirst:/usr/libexec/login.sh
+ttyS0::askfirst:/usr/libexec/login.sh
+tty0::askfirst:/usr/libexec/login.sh
+hvc0::askfirst:/usr/libexec/login.sh
+ttymxc0::askfirst:/usr/libexec/login.sh
+ttymxc1::askfirst:/usr/libexec/login.sh
+ttymxc2::askfirst:/usr/libexec/login.sh
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+sanitize_name_arm64() {
+ sed -e '
+ y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/;
+ s/[^a-z0-9_-]\+/-/g;
+ s/^-//;
+ s/-$//;
+ ' "$@"
+}
+
+do_sysinfo_arm64() {
+ local vendor product file
+
+ for file in sys_vendor board_vendor; do
+ vendor="$(cat /sys/devices/virtual/dmi/id/$file 2>/dev/null)"
+ case "$vendor" in
+ empty | \
+ System\ manufacturer | \
+ To\ [bB]e\ [fF]illed\ [bB]y\ O\.E\.M\.)
+ continue
+ ;;
+ esac
+ [ -n "$vendor" ] && break
+ done
+
+ for file in product_name board_name; do
+ product="$(cat /sys/devices/virtual/dmi/id/$file 2>/dev/null)"
+ case "$vendor:$product" in
+ ?*:empty | \
+ ?*:System\ Product\ Name | \
+ ?*:To\ [bB]e\ [fF]illed\ [bB]y\ O\.E\.M\.)
+ continue
+ ;;
+ ?*:?*)
+ break
+ ;;
+ esac
+ done
+
+ [ -d "/sys/firmware/devicetree/base" ] && return
+
+ [ -n "$vendor" -a -n "$product" ] || return
+
+ mkdir -p /tmp/sysinfo
+
+ echo "$vendor $product" > /tmp/sysinfo/model
+
+ sanitize_name_arm64 /tmp/sysinfo/model > /tmp/sysinfo/board_name
+}
+
+boot_hook_add preinit_main do_sysinfo_arm64
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+RAMFS_COPY_BIN="/usr/sbin/blkid"
+
+platform_check_image() {
+ local board=$(board_name)
+ local diskdev partdev diff
+ [ "$#" -gt 1 ] && return 1
+
+ v "Board is ${board}"
+
+ export_bootdevice && export_partdevice diskdev 0 || {
+ v "platform_check_image: Unable to determine upgrade device"
+ return 1
+ }
+
+ get_partitions "/dev/$diskdev" bootdisk
+
+ v "Extract boot sector from the image"
+ get_image_dd "$1" of=/tmp/image.bs count=63 bs=512b
+
+ get_partitions /tmp/image.bs image
+
+ #compare tables
+ diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
+
+ rm -f /tmp/image.bs /tmp/partmap.bootdisk /tmp/partmap.image
+
+ if [ -n "$diff" ]; then
+ v "Partition layout has changed. Full image will be written."
+ ask_bool 0 "Abort" && exit 1
+ return 0
+ fi
+}
+
+platform_copy_config() {
+ local partdev parttype=ext4
+
+ if export_partdevice partdev 2; then
+ mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt
+ cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
+ umount /mnt
+ else
+ v "ERROR: Unable to find partition to copy config data to"
+ fi
+
+ sleep 5
+}
+
+# To avoid writing over any firmware
+# files (e.g ubootefi.var or firmware/X/ aka EBBR)
+# Copy efi/openwrt and efi/boot from the new image
+# to the existing ESP
+platform_do_upgrade_efi_system_partition() {
+ local image_file=$1
+ local target_partdev=$2
+ local image_efisp_start=$3
+ local image_efisp_size=$4
+
+ v "Updating ESP on ${target_partdev}"
+ NEW_ESP_DIR="/mnt/new_esp_loop"
+ CUR_ESP_DIR="/mnt/cur_esp"
+ mkdir "${NEW_ESP_DIR}"
+ mkdir "${CUR_ESP_DIR}"
+
+ get_image_dd "$image_file" of="/tmp/new_efi_sys_part.img" \
+ skip="$image_efisp_start" count="$image_efisp_size"
+
+ mount -t vfat -o loop -o ro /tmp/new_efi_sys_part.img "${NEW_ESP_DIR}"
+ if [ ! -d "${NEW_ESP_DIR}/efi/boot" ]; then
+ v "ERROR: Image does not contain EFI boot files (/efi/boot)"
+ return 1
+ fi
+
+ mount -t vfat "/dev/$partdev" "${CUR_ESP_DIR}"
+
+ for d in $(find "${NEW_ESP_DIR}/efi/" -mindepth 1 -maxdepth 1 -type d); do
+ v "Copying ${d}"
+ newdir_bname=$(basename "${d}")
+ rm -rf "${CUR_ESP_DIR}/efi/${newdir_bname}"
+ cp -r "${d}" "${CUR_ESP_DIR}/efi"
+ done
+
+ umount "${NEW_ESP_DIR}"
+ umount "${CUR_ESP_DIR}"
+}
+
+platform_do_upgrade() {
+ local board=$(board_name)
+ local diskdev partdev diff
+
+ export_bootdevice && export_partdevice diskdev 0 || {
+ v "platform_do_upgrade: Unable to determine upgrade device"
+ return 1
+ }
+
+ sync
+
+ if [ "$UPGRADE_OPT_SAVE_PARTITIONS" = "1" ]; then
+ get_partitions "/dev/$diskdev" bootdisk
+
+ v "Extract boot sector from the image"
+ get_image_dd "$1" of=/tmp/image.bs count=63 bs=512b
+
+ get_partitions /tmp/image.bs image
+
+ #compare tables
+ diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
+ else
+ diff=1
+ fi
+
+ # Only change the partition table if sysupgrade -p is set,
+ # otherwise doing so could interfere with embedded "single storage"
+ # (e.g SoC boot from SD card) setups, as well as other user
+ # created storage (like uvol)
+ if [ -n "$diff" ] && [ "${UPGRADE_OPT_SAVE_PARTITIONS}" = "0" ]; then
+ # Need to remove partitions before dd, otherwise the partitions
+ # that are added after will have minor numbers offset
+ partx -d - "/dev/$diskdev"
+
+ get_image_dd "$1" of="/dev/$diskdev" bs=4096 conv=fsync
+
+ # Separate removal and addtion is necessary; otherwise, partition 1
+ # will be missing if it overlaps with the old partition 2
+ partx -a - "/dev/$diskdev"
+
+ return 0
+ fi
+
+ #iterate over each partition from the image and write it to the boot disk
+ while read part start size; do
+ if export_partdevice partdev $part; then
+ v "Writing image to /dev/$partdev..."
+ if [ "$part" = "1" ]; then
+ platform_do_upgrade_efi_system_partition \
+ $1 $partdev $start $size || return 1
+ else
+ v "Normal partition, doing DD"
+ get_image_dd "$1" of="/dev/$partdev" ibs=512 obs=1M skip="$start" \
+ count="$size" conv=fsync
+ fi
+ else
+ v "Unable to find partition $part device, skipped."
+ fi
+ done < /tmp/partmap.image
+
+ local parttype=ext4
+
+ if (blkid > /dev/null) && export_partdevice partdev 1; then
+ part_magic_fat "/dev/$partdev" && parttype=vfat
+ mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt
+ if export_partdevice partdev 2; then
+ THIS_PART_BLKID=$(blkid -o value -s PARTUUID "/dev/${partdev}")
+ v "Setting rootfs PARTUUID=${THIS_PART_BLKID}"
+ sed -i "s/\(PARTUUID=\)[a-f0-9-]\+/\1${THIS_PART_BLKID}/ig" \
+ /mnt/efi/openwrt/grub.cfg
+ fi
+ umount /mnt
+ fi
+ # Provide time for the storage medium to flush before system reset
+ # (despite the sync/umount it appears NVMe etc. do it in the background)
+ sleep 5
+}
--- /dev/null
+CONFIG_64BIT=y
+CONFIG_9P_FS=y
+# CONFIG_9P_FS_POSIX_ACL is not set
+# CONFIG_9P_FS_SECURITY is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_EINJ=y
+# CONFIG_ACPI_APEI_ERST_DEBUG is not set
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_MEMORY_FAILURE=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_BATTERY=y
+# CONFIG_ACPI_BGRT is not set
+CONFIG_ACPI_CCA_REQUIRED=y
+CONFIG_ACPI_CONTAINER=y
+CONFIG_ACPI_CPPC_CPUFREQ=y
+# CONFIG_ACPI_DEBUG is not set
+# CONFIG_ACPI_DEBUGGER is not set
+# CONFIG_ACPI_DOCK is not set
+# CONFIG_ACPI_EC_DEBUGFS is not set
+CONFIG_ACPI_FAN=y
+CONFIG_ACPI_GENERIC_GSI=y
+CONFIG_ACPI_GTDT=y
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_I2C_OPREGION=y
+CONFIG_ACPI_IORT=y
+CONFIG_ACPI_MCFG=y
+# CONFIG_ACPI_PCI_SLOT is not set
+CONFIG_ACPI_PPTT=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_PROCESSOR_IDLE=y
+CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
+CONFIG_ACPI_SPCR_TABLE=y
+CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_TINY_POWER_BUTTON is not set
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=24
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_STACKWALK=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANTS_NO_INSTR=y
+CONFIG_ARM64=y
+CONFIG_ARM64_4K_PAGES=y
+# CONFIG_ARM64_ACPI_PARKING_PROTOCOL is not set
+CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
+CONFIG_ARM64_PAGE_SHIFT=12
+CONFIG_ARM64_PA_BITS=48
+CONFIG_ARM64_PA_BITS_48=y
+CONFIG_ARM64_TAGGED_ADDR_ABI=y
+CONFIG_ARM64_VA_BITS=39
+CONFIG_ARM64_VA_BITS_39=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GIC_V2M=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_ARM_GIC_V3_ITS_PCI=y
+CONFIG_ARM_PSCI_FW=y
+CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+CONFIG_BALLOON_COMPACTION=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NVME=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLK_MQ_VIRTIO=y
+CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMMON_CLK=y
+# CONFIG_COMPAT_32BIT_TIME is not set
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_CRC32=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ACPI=y
+CONFIG_DMA_DIRECT_REMAP=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_REMAP=y
+CONFIG_DMI=y
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=y
+CONFIG_DTC=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EFI=y
+CONFIG_EFIVAR_FS=y
+CONFIG_EFI_ARMSTUB_DTB_LOADER=y
+# CONFIG_EFI_BOOTLOADER_CONTROL is not set
+# CONFIG_EFI_CAPSULE_LOADER is not set
+# CONFIG_EFI_CUSTOM_SSDT_OVERLAYS is not set
+# CONFIG_EFI_DISABLE_PCI_DMA is not set
+CONFIG_EFI_EARLYCON=y
+CONFIG_EFI_ESRT=y
+CONFIG_EFI_GENERIC_STUB=y
+# CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER is not set
+CONFIG_EFI_PARAMS_FROM_FDT=y
+CONFIG_EFI_RUNTIME_WRAPPERS=y
+CONFIG_EFI_STUB=y
+# CONFIG_EFI_TEST is not set
+CONFIG_EXT4_FS=y
+CONFIG_F2FS_FS=y
+CONFIG_FAILOVER=y
+CONFIG_FB_EFI=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_AUTOSELECT=y
+CONFIG_FONT_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FS_IOMAP=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ARCH_TOPOLOGY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_ACPI=y
+CONFIG_GPIO_CDEV=y
+# CONFIG_GPIO_HISI is not set
+CONFIG_GPIO_PL061=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HID=y
+CONFIG_HID_GENERIC=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_HOTPLUG_PCI_ACPI=y
+CONFIG_HVC_DRIVER=y
+CONFIG_HZ_PERIODIC=y
+# CONFIG_I2C_AMD_MP2 is not set
+CONFIG_I2C_HID_ACPI=y
+# CONFIG_I2C_HISI is not set
+# CONFIG_I2C_SLAVE_TESTUNIT is not set
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+# CONFIG_ISCSI_IBFT is not set
+CONFIG_JBD2=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MEMORY_BALLOON=y
+CONFIG_MIGRATION=y
+# CONFIG_MLXBF_GIGE is not set
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_MVMDIO=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_NET_9P=y
+# CONFIG_NET_9P_DEBUG is not set
+CONFIG_NET_9P_VIRTIO=y
+CONFIG_NET_FAILOVER=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NLS=y
+CONFIG_NR_CPUS=256
+CONFIG_NVMEM=y
+CONFIG_NVME_CORE=y
+# CONFIG_NVME_MULTIPATH is not set
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_PADATA=y
+CONFIG_PAGE_REPORTING=y
+CONFIG_PARTITION_PERCPU=y
+CONFIG_PCI=y
+# CONFIG_PCIE_HISI_ERR is not set
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_ECAM=y
+CONFIG_PCI_HOST_COMMON=y
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+CONFIG_PGTABLE_LEVELS=3
+CONFIG_PHYS_ADDR_T_64BIT=y
+# CONFIG_PMIC_OPREGION is not set
+CONFIG_PNP=y
+CONFIG_PNPACPI=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PTP_1588_CLOCK_OPTIONAL=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_RATIONAL=y
+# CONFIG_RESET_ATTACK_MITIGATION is not set
+CONFIG_RFS_ACCEL=y
+CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
+CONFIG_RPS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_SCSI=y
+CONFIG_SCSI_COMMON=y
+CONFIG_SCSI_VIRTIO=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SG_POOL=y
+CONFIG_SMP=y
+CONFIG_SOCK_RX_QUEUE_MAPPING=y
+CONFIG_SPARSEMEM=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SRCU=y
+# CONFIG_SURFACE_PLATFORMS is not set
+CONFIG_SWIOTLB=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYSFB=y
+# CONFIG_SYSFB_SIMPLEFB is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_OF=y
+CONFIG_THREAD_INFO_IN_TASK=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_ACPI=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+# CONFIG_UACCE is not set
+CONFIG_UCS2_STRING=y
+CONFIG_UNMAP_KERNEL_AT_EL0=y
+CONFIG_USB=y
+CONFIG_USB_HID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_PCI=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_VIRTIO=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_VIRTIO_NET=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_PCI_LEGACY=y
+CONFIG_VIRTIO_PCI_LIB=y
+CONFIG_VMAP_STACK=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_WDAT_WDT=y
+CONFIG_XPS=y
+CONFIG_ZONE_DMA32=y
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2016-2017 Yousong Zhou <yszhou4tech@gmail.com>
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+GRUB2_VARIANT =
+GRUB_TERMINALS =
+GRUB_SERIAL_CONFIG =
+GRUB_TERMINAL_CONFIG =
+GRUB_CONSOLE_CMDLINE = earlycon
+
+ifneq ($(CONFIG_GRUB_CONSOLE),)
+ GRUB_TERMINALS += console
+endif
+
+GRUB_SERIAL:=$(call qstrip,$(CONFIG_GRUB_SERIAL))
+
+ifneq ($(GRUB_SERIAL),)
+ GRUB_SERIAL_CONFIG := serial --unit=0 --speed=$(CONFIG_GRUB_BAUDRATE) --word=8 --parity=no --stop=1 --rtscts=$(if $(CONFIG_GRUB_FLOWCONTROL),on,off)
+ GRUB_TERMINALS += serial
+endif
+
+ifneq ($(GRUB_TERMINALS),)
+ GRUB_TERMINAL_CONFIG := terminal_input $(GRUB_TERMINALS); terminal_output $(GRUB_TERMINALS)
+endif
+
+ROOTPART:=$(call qstrip,$(CONFIG_TARGET_ROOTFS_PARTNAME))
+ROOTPART:=$(if $(ROOTPART),$(ROOTPART),PARTUUID=$(IMG_PART_SIGNATURE)-02)
+GPT_ROOTPART:=$(call qstrip,$(CONFIG_TARGET_ROOTFS_PARTNAME))
+GPT_ROOTPART:=$(if $(GPT_ROOTPART),$(GPT_ROOTPART),PARTUUID=$(shell echo $(IMG_PART_DISKGUID) | sed 's/00$$/02/'))
+
+GRUB_TIMEOUT:=$(call qstrip,$(CONFIG_GRUB_TIMEOUT))
+GRUB_TITLE:=$(call qstrip,$(CONFIG_GRUB_TITLE))
+
+BOOTOPTS:=$(call qstrip,$(CONFIG_GRUB_BOOTOPTS))
+
+define Build/combined
+ $(INSTALL_DIR) $@.boot/
+ $(CP) $(KDIR)/$(KERNEL_NAME) $@.boot/efi/openwrt/
+ -$(CP) $(STAGING_DIR_ROOT)/boot/. $@.boot/boot/
+ $(if $(filter $(1),efi),
+ $(INSTALL_DIR) $@.boot/efi/boot
+ $(CP) $(STAGING_DIR_IMAGE)/grub2/boot$(if $(CONFIG_aarch64),aa64,arm).efi $@.boot/efi/openwrt/
+ $(CP) $(STAGING_DIR_IMAGE)/grub2/boot$(if $(CONFIG_aarch64),aa64,arm).efi $@.boot/efi/boot/
+ )
+ KERNELPARTTYPE=ef FAT_TYPE="32" PADDING="1" SIGNATURE="$(IMG_PART_SIGNATURE)" \
+ $(if $(filter $(1),efi),GUID="$(IMG_PART_DISKGUID)") $(SCRIPT_DIR)/gen_image_generic.sh \
+ $@ \
+ $(CONFIG_TARGET_KERNEL_PARTSIZE) $@.boot \
+ $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS) \
+ 256
+endef
+
+define Build/grub-config
+ rm -fR $@.boot
+ $(INSTALL_DIR) $@.boot/efi/openwrt/
+ sed \
+ -e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
+ -e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
+ -e 's#@ROOTPART@#root=$(ROOTPART) rootwait#g' \
+ -e 's#@GPT_ROOTPART@#root=$(GPT_ROOTPART) rootwait#g' \
+ -e 's#@CMDLINE@#$(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE)#g' \
+ -e 's#@TIMEOUT@#$(GRUB_TIMEOUT)#g' \
+ -e 's#@TITLE@#$(GRUB_TITLE)#g' \
+ -e 's#@KERNEL_NAME@#$(KERNEL_NAME)#g' \
+ ./grub-$(1).cfg > $@.boot/efi/openwrt/grub.cfg
+endef
+
+define Build/grub-install
+ rm -fR $@.grub2
+ $(INSTALL_DIR) $@.grub2
+endef
+
+DEVICE_VARS += GRUB2_VARIANT
+define Device/efi-default
+ IMAGE/rootfs.img := append-rootfs | pad-to $(ROOTFS_PARTSIZE)
+ IMAGE/rootfs.img.gz := append-rootfs | pad-to $(ROOTFS_PARTSIZE) | gzip
+ IMAGE/combined.img := grub-config efi | combined efi | grub-install efi | append-metadata
+ IMAGE/combined.img.gz := grub-config efi | combined efi | grub-install efi | gzip | append-metadata
+ IMAGE/combined.vmdk := grub-config efi | combined efi | grub-install efi | qemu-image vmdk
+ ifeq ($(CONFIG_TARGET_IMAGES_GZIP),y)
+ IMAGES-y := rootfs.img.gz
+ IMAGES-y += combined.img.gz
+ else
+ IMAGES-y := rootfs.img
+ IMAGES-y += combined.img
+ endif
+ ifeq ($(CONFIG_VMDK_IMAGES),y)
+ IMAGES-y += combined.vmdk
+ endif
+ KERNEL := kernel-bin
+ KERNEL_INSTALL := 1
+ IMAGES := $$(IMAGES-y)
+ ARTIFACTS := $$(ARTIFACTS-y)
+ SUPPORTED_DEVICES :=
+ ifeq ($(CONFIG_arm),y)
+ KERNEL_NAME = zImage
+ endif
+endef
+
+define Device/generic
+ $(call Device/efi-default)
+ DEVICE_TITLE := Generic EFI Boot
+ GRUB2_VARIANT := generic
+ FILESYSTEMS := ext4 squashfs
+ DEVICE_PACKAGES += kmod-amazon-ena kmod-e1000e kmod-vmxnet3 kmod-rtc-rx8025 \
+ kmod-i2c-mux-pca954x kmod-gpio-pca953x partx-utils kmod-wdt-sp805 \
+ kmod-mvneta kmod-mvpp2 kmod-fsl-dpaa1-net kmod-fsl-dpaa2-net \
+ kmod-fsl-enetc-net kmod-dwmac-imx kmod-fsl-fec kmod-thunderx-net \
+ kmod-dwmac-rockchip kmod-dwmac-sun8i kmod-phy-aquantia kmod-phy-broadcom \
+ kmod-phy-marvell kmod-phy-marvell-10g kmod-atlantic
+endef
+TARGET_DEVICES += generic
+
+$(eval $(call BuildImage))
--- /dev/null
+@SERIAL_CONFIG@
+@TERMINAL_CONFIG@
+
+set default="0"
+set timeout="@TIMEOUT@"
+
+menuentry "@TITLE@" {
+ search --set=root --label kernel
+ linux /efi/openwrt/@KERNEL_NAME@ @GPT_ROOTPART@ @CMDLINE@ noinitrd
+}
+menuentry "@TITLE@ (failsafe)" {
+ search --set=root --label kernel
+ linux /efi/openwrt/@KERNEL_NAME@ failsafe=true @GPT_ROOTPART@ @CMDLINE@ noinitrd
+}
--- /dev/null
+define KernelPackage/acpi-mdio
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=ACPI MDIO support
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-mdio-devres
+ KCONFIG:=CONFIG_ACPI_MDIO
+ FILES:=$(LINUX_DIR)/drivers/net/mdio/acpi_mdio.ko
+ AUTOLOAD:=$(call AutoLoad,11,acpi_mdio)
+endef
+
+define KernelPackage/acpi-mdio/description
+ Kernel driver for ACPI MDIO support
+endef
+
+$(eval $(call KernelPackage,acpi-mdio))
+
+define KernelPackage/fsl-pcs-lynx
+ SUBMENU=$(NETWORK_DEVICES_MENU)
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-of-mdio +kmod-phylink
+ TITLE:=NXP (Freescale) Lynx PCS
+ HIDDEN:=1
+ KCONFIG:=CONFIG_PCS_LYNX
+ FILES=$(LINUX_DIR)/drivers/net/pcs/pcs-lynx.ko
+ AUTOLOAD=$(call AutoLoad,30,pcs-lynx)
+endef
+
+$(eval $(call KernelPackage,fsl-pcs-lynx))
+
+define KernelPackage/pcs-xpcs
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Synopsis DesignWare PCS driver
+ DEPENDS:=@(TARGET_armsr_armv8)
+ KCONFIG:=CONFIG_PCS_XPCS
+ FILES:=$(LINUX_DIR)/drivers/net/pcs/pcs_xpcs.ko
+ AUTOLOAD:=$(call AutoLoad,20,pcs_xpcs)
+endef
+
+$(eval $(call KernelPackage,pcs-xpcs))
+
+define KernelPackage/fsl-fec
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-of-mdio \
+ +kmod-ptp +kmod-net-selftests
+ TITLE:=NXP (Freescale) FEC Ethernet controller (i.MX)
+ KCONFIG:=CONFIG_FEC
+ FILES:=$(LINUX_DIR)/drivers/net/ethernet/freescale/fec.ko
+ AUTOLOAD:=$(call AutoLoad,35,fec)
+endef
+
+$(eval $(call KernelPackage,fsl-fec))
+
+define KernelPackage/fsl-xgmac-mdio
+ SUBMENU=$(NETWORK_DEVICES_MENU)
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-of-mdio +kmod-acpi-mdio
+ TITLE:=NXP (Freescale) MDIO bus
+ KCONFIG:=CONFIG_FSL_XGMAC_MDIO
+ FILES=$(LINUX_DIR)/drivers/net/ethernet/freescale/xgmac_mdio.ko
+ AUTOLOAD=$(call AutoLoad,30,xgmac_mdio)
+endef
+
+$(eval $(call KernelPackage,fsl-xgmac-mdio))
+
+define KernelPackage/fsl-mc-dpio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=NXP DPAA2 DPIO (Data Path IO) driver
+ HIDDEN:=1
+ KCONFIG:=CONFIG_FSL_MC_BUS=y \
+ CONFIG_FSL_MC_DPIO
+ FILES:=$(LINUX_DIR)/drivers/soc/fsl/dpio/fsl-mc-dpio.ko
+ AUTOLOAD=$(call AutoLoad,30,fsl-mc-dpio)
+endef
+
+$(eval $(call KernelPackage,fsl-mc-dpio))
+
+define KernelPackage/fsl-enetc-net
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=:NXP ENETC (LS1028A) Ethernet
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-phylink +kmod-fsl-pcs-lynx
+ KCONFIG:= \
+ CONFIG_FSL_ENETC \
+ CONFIG_FSL_ENETC_VF \
+ CONFIG_FSL_ENETC_QOS
+ FILES:= \
+ $(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc-vf.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc-mdio.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc-ierb.ko
+ AUTOLOAD=$(call AutoLoad,35,fsl-enetc)
+endef
+
+$(eval $(call KernelPackage,fsl-enetc-net))
+
+define KernelPackage/fsl-dpaa1-net
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=NXP DPAA1 (LS1043/LS1046) Ethernet
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-fsl-xgmac-mdio +kmod-libphy +kmod-crypto-crc32
+ KCONFIG:= \
+ CONFIG_FSL_DPAA=y \
+ CONFIG_FSL_DPAA_ETH \
+ CONFIG_FSL_FMAN \
+ CONFIG_FSL_DPAA_CHECKING=n \
+ CONFIG_FSL_BMAN_TEST=n \
+ CONFIG_FSL_QMAN_TEST=n
+ MODULES:= \
+ $(LINUX_DIR)/drivers/net/ethernet/freescale/dpaa/fsl_dpa.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/freescale/fman/fsl_dpaa_fman.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/freescale/fman/fsl_dpaa_mac.ko
+ AUTOLOAD=$(call AutoLoad,35,fsl-dpa)
+endef
+
+$(eval $(call KernelPackage,fsl-dpaa1-net))
+
+define KernelPackage/fsl-dpaa2-net
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=NXP DPAA2 Ethernet
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-fsl-xgmac-mdio +kmod-phylink \
+ +kmod-fsl-pcs-lynx +kmod-fsl-mc-dpio
+ KCONFIG:= \
+ CONFIG_FSL_MC_UAPI_SUPPORT=y \
+ CONFIG_FSL_DPAA2_ETH
+ FILES:= \
+ $(LINUX_DIR)/drivers/net/ethernet/freescale/dpaa2/fsl-dpaa2-eth.ko
+ AUTOLOAD=$(call AutoLoad,35,fsl-dpaa2-eth)
+endef
+
+$(eval $(call KernelPackage,fsl-dpaa2-net))
+
+define KernelPackage/fsl-dpaa2-console
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=NXP DPAA2 Debug console
+ DEPENDS:=@(TARGET_armsr_armv8)
+ KCONFIG:=CONFIG_DPAA2_CONSOLE
+ FILES=$(LINUX_DIR)/drivers/soc/fsl/dpaa2-console.ko
+ AUTOLOAD=$(call AutoLoad,40,dpaa2-console)
+endef
+
+define KernelPackage/fsl-dpaa2-console/description
+ Kernel modules for the NXP DPAA2 debug consoles
+ (Management Complex and AIOP).
+endef
+
+$(eval $(call KernelPackage,fsl-dpaa2-console))
+
+define KernelPackage/marvell-mdio
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Marvell Armada platform MDIO driver
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-of-mdio +kmod-acpi-mdio
+ KCONFIG:=CONFIG_MVMDIO
+ FILES=$(LINUX_DIR)/drivers/net/ethernet/marvell/mvmdio.ko
+ AUTOLOAD=$(call AutoLoad,30,marvell-mdio)
+endef
+
+$(eval $(call KernelPackage,marvell-mdio))
+
+define KernelPackage/phy-marvell-10g
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Marvell Alaska 10G PHY driver
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy
+ KCONFIG:=CONFIG_MARVELL_10G_PHY
+ FILES=$(LINUX_DIR)/drivers/net/phy/marvell10g.ko
+ AUTOLOAD=$(call AutoLoad,35,marvell10g)
+endef
+
+$(eval $(call KernelPackage,phy-marvell-10g))
+
+define KernelPackage/mvneta
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Marvell Armada 370/38x/XP/37xx network driver
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-marvell-mdio +kmod-phylink
+ KCONFIG:=CONFIG_MVNETA
+ FILES:=$(LINUX_DIR)/drivers/net/ethernet/marvell/mvneta.ko
+ AUTOLOAD=$(call AutoLoad,40,mvneta)
+endef
+
+$(eval $(call KernelPackage,mvneta))
+
+define KernelPackage/mvpp2
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Marvell Armada 375/7K/8K network driver
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-marvell-mdio +kmod-phylink
+ KCONFIG:=CONFIG_MVPP2 \
+ CONFIG_MVPP2_PTP=n
+ FILES=$(LINUX_DIR)/drivers/net/ethernet/marvell/mvpp2/mvpp2.ko
+ AUTOLOAD=$(call AutoLoad,40,mvpp2)
+endef
+
+$(eval $(call KernelPackage,mvpp2))
+
+define KernelPackage/imx2-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=NXP (Freescale) i.MX2+ and Layerscape watchdog driver
+ KCONFIG:=CONFIG_IMX2_WDT
+ FILES=$(LINUX_DIR)/drivers/watchdog/imx2_wdt.ko
+ AUTOLOAD=$(call AutoLoad,60,imx2_wdt)
+endef
+
+$(eval $(call KernelPackage,imx2-wdt))
+
+define KernelPackage/imx7-ulp-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=NXP (Freescale) i.MX7ULP and later watchdog
+ KCONFIG:=CONFIG_IMX7ULP_WDT
+ FILES=$(LINUX_DIR)/drivers/watchdog/imx7ulp_wdt.ko
+ AUTOLOAD=$(call AutoLoad,60,imx7ulp_wdt)
+endef
+
+$(eval $(call KernelPackage,imx7-ulp-wdt))
+
+define KernelPackage/stmmac-core
+ SUBMENU=$(NETWORK_DEVICES_MENU)
+ TITLE:=Synopsis Ethernet Controller core (NXP,STMMicro,others)
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-phylink +kmod-pcs-xpcs +kmod-ptp
+ KCONFIG:=CONFIG_STMMAC_ETH \
+ CONFIG_STMMAC_SELFTESTS=n \
+ CONFIG_STMMAC_PLATFORM \
+ CONFIG_CONFIG_DWMAC_DWC_QOS_ETH=n \
+ CONFIG_DWMAC_GENERIC
+ FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/stmmac.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/stmmac-platform.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.ko
+ AUTOLOAD=$(call AutoLoad,40,stmmac stmmac-platform dwmac-generic)
+endef
+
+$(eval $(call KernelPackage,stmmac-core))
+
+define KernelPackage/dwmac-imx
+ SUBMENU=$(NETWORK_DEVICES_MENU)
+ TITLE:=NXP i.MX8 Ethernet controller
+ DEPENDS:=+kmod-stmmac-core
+ KCONFIG:=CONFIG_DWMAC_IMX8
+ FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.ko
+ AUTOLOAD=$(call AutoLoad,45,dwmac-imx)
+endef
+
+$(eval $(call KernelPackage,dwmac-imx))
+
+define KernelPackage/dwmac-sun8i
+ SUBMENU=$(NETWORK_DEVICES_MENU)
+ TITLE:=Allwinner H3/A83T/A64 (sun8i) Ethernet
+ DEPENDS:=+kmod-stmmac-core +kmod-mdio-bus-mux
+ KCONFIG:=CONFIG_DWMAC_SUN8I
+ FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.ko
+ AUTOLOAD=$(call AutoLoad,45,dwmac-sun8i)
+endef
+
+$(eval $(call KernelPackage,dwmac-sun8i))
+
+define KernelPackage/dwmac-rockchip
+ SUBMENU=$(NETWORK_DEVICES_MENU)
+ TITLE:=Rockchip RK3328/RK3399/RK3568 Ethernet
+ DEPENDS:=+kmod-stmmac-core +kmod-mdio-bus-mux
+ KCONFIG:=CONFIG_DWMAC_ROCKCHIP
+ FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.ko
+ AUTOLOAD=$(call AutoLoad,45,dwmac-rk)
+endef
+
+$(eval $(call KernelPackage,dwmac-rockchip))
+
+define KernelPackage/thunderx-net
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Marvell (Cavium) ThunderX/2 network drivers
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-phylink
+ KCONFIG:=CONFIG_NET_VENDOR_CAVIUM \
+ CONFIG_THUNDER_NIC_PF \
+ CONFIG_THUNDER_NIC_VF \
+ CONFIG_THUNDER_NIC_BGX \
+ CONFIG_THUNDER_NIC_RGX
+ FILES=$(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/nicvf.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/nicpf.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/thunder_xcv.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/thunder_bgx.ko
+ AUTOLOAD=$(call AutoLoad,40,nicpf nicvf thunder_xcv thunder_bgx)
+endef
+
+$(eval $(call KernelPackage,thunderx-net))
+
+define KernelPackage/wdt-sp805
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=ARM SP805 Watchdog
+ KCONFIG:=CONFIG_ARM_SP805_WATCHDOG
+ FILES=$(LINUX_DIR)/drivers/watchdog/sp805_wdt.ko
+ AUTOLOAD=$(call AutoLoad,50,sp805_wdt)
+endef
+
+define KernelPackage/wdt-sp805/description
+ Support for the ARM SP805 wathchdog module.
+ This is present in the NXP Layerscape family,
+ HiSilicon HI3660 among others.
+endef
+
+$(eval $(call KernelPackage,wdt-sp805))
+
--- /dev/null
+From b77c0ecdc7915e5c5c515da1aa6cfaf6f4eb8351 Mon Sep 17 00:00:00 2001
+From: Mathew McBride <matt@traverse.com.au>
+Date: Wed, 28 Sep 2022 16:39:31 +1000
+Subject: [PATCH] arm: disable code size reduction measures
+ (gc-sections,-f*-sections)
+
+This interferes with the EFI boot stub on armv7l.
+
+Signed-off-by: Mathew McBride <matt@traverse.com.au>
+---
+ arch/arm/Kconfig | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -117,7 +117,6 @@ config ARM
+ select HAVE_UID16
+ select HAVE_VIRT_CPU_ACCOUNTING_GEN
+ select IRQ_FORCED_THREADING
+- select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
+ select MODULES_USE_ELF_REL
+ select NEED_DMA_MAP_STATE
+ select OF_EARLY_FLATTREE if OF
--- /dev/null
+From d5af37ae22f0364be9ded773d737dd6e5b207b10 Mon Sep 17 00:00:00 2001
+From: Ioana Ciornei <ioana.ciornei@nxp.com>
+Date: Thu, 21 Nov 2019 21:15:25 +0200
+Subject: [PATCH 3/4] dpaa2-eth: do not hold rtnl_lock on phylink_create() or
+ _destroy()
+
+The rtnl_lock should not be held when calling phylink_create() or
+phylink_destroy() since it leads to the deadlock listed below:
+
+[ 18.656576] rtnl_lock+0x18/0x20
+[ 18.659798] sfp_bus_add_upstream+0x28/0x90
+[ 18.663974] phylink_create+0x2cc/0x828
+[ 18.667803] dpaa2_mac_connect+0x14c/0x2a8
+[ 18.671890] dpaa2_eth_connect_mac+0x94/0xd8
+
+Fix this by moving the _lock() and _unlock() calls just outside of
+phylink_of_phy_connect() and phylink_disconnect_phy().
+
+Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink")
+Reported-by: Russell King <linux@armlinux.org.uk>
+Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 4 ----
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 4 ++++
+ 2 files changed, 4 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+@@ -4217,12 +4217,10 @@ static irqreturn_t dpni_irq0_handler_thr
+ dpaa2_eth_set_mac_addr(netdev_priv(net_dev));
+ dpaa2_eth_update_tx_fqids(priv);
+
+- rtnl_lock();
+ if (dpaa2_eth_has_mac(priv))
+ dpaa2_eth_disconnect_mac(priv);
+ else
+ dpaa2_eth_connect_mac(priv);
+- rtnl_unlock();
+ }
+
+ return IRQ_HANDLED;
+@@ -4516,9 +4514,7 @@ static int dpaa2_eth_remove(struct fsl_m
+ #endif
+
+ unregister_netdev(net_dev);
+- rtnl_lock();
+ dpaa2_eth_disconnect_mac(priv);
+- rtnl_unlock();
+
+ dpaa2_eth_dl_port_del(priv);
+ dpaa2_eth_dl_traps_unregister(priv);
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+@@ -351,7 +351,9 @@ int dpaa2_mac_connect(struct dpaa2_mac *
+ if (mac->pcs)
+ phylink_set_pcs(mac->phylink, &mac->pcs->pcs);
+
++ rtnl_lock();
+ err = phylink_fwnode_phy_connect(mac->phylink, dpmac_node, 0);
++ rtnl_unlock();
+ if (err) {
+ netdev_err(net_dev, "phylink_fwnode_phy_connect() = %d\n", err);
+ goto err_phylink_destroy;
+@@ -372,7 +374,9 @@ void dpaa2_mac_disconnect(struct dpaa2_m
+ if (!mac->phylink)
+ return;
+
++ rtnl_lock();
+ phylink_disconnect_phy(mac->phylink);
++ rtnl_unlock();
+ phylink_destroy(mac->phylink);
+ dpaa2_pcs_destroy(mac);
+ }
--- /dev/null
+From c314138bd045e050432158ab021160de3ba51c5e Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 30 Jan 2020 22:42:38 +0000
+Subject: [PATCH 2/4] net: dpaa2-mac: add support for more 10G modes
+
+Phylink documentation says:
+ * Note that the PHY may be able to transform from one connection
+ * technology to another, so, eg, don't clear 1000BaseX just
+ * because the MAC is unable to BaseX mode. This is more about
+ * clearing unsupported speeds and duplex settings. The port modes
+ * should not be cleared; phylink_set_port_modes() will help with this.
+
+So add the missing 10G modes.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+@@ -140,6 +140,12 @@ static void dpaa2_mac_validate(struct ph
+ case PHY_INTERFACE_MODE_10GBASER:
+ case PHY_INTERFACE_MODE_USXGMII:
+ phylink_set(mask, 10000baseT_Full);
++ phylink_set(mask, 10000baseKR_Full);
++ phylink_set(mask, 10000baseCR_Full);
++ phylink_set(mask, 10000baseSR_Full);
++ phylink_set(mask, 10000baseLR_Full);
++ phylink_set(mask, 10000baseLRM_Full);
++ phylink_set(mask, 10000baseER_Full);
+ if (state->interface == PHY_INTERFACE_MODE_10GBASER)
+ break;
+ phylink_set(mask, 5000baseT_Full);
+++ /dev/null
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MMAP_RND_BITS=8
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_VIRT=y
-CONFIG_ARM=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-# CONFIG_ARM_HIGHBANK_CPUIDLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_LPAE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_PSCI=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_CACHE_L2X0=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DMA_OPS=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_VDSO_32=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HAVE_SMP=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_NEON=y
-CONFIG_NR_CPUS=4
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
+++ /dev/null
-ARCH:=arm
-SUBTARGET:=32
-BOARDNAME:=32-bit ARM QEMU Virtual Machine
-CPU_TYPE:=cortex-a15
-CPU_SUBTYPE:=neon-vfpv4
-KERNELNAME:=zImage
-
-define Target/Description
- Build images for $(BOARDNAME)
-endef
+++ /dev/null
-CONFIG_64BIT=y
-CONFIG_ARCH_HISI=y
-CONFIG_ARCH_INTEL_SOCFPGA=y
-CONFIG_ARCH_LAYERSCAPE=y
-CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_ROCKCHIP=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_ARCH_SYNQUACER=y
-CONFIG_ARCH_THUNDER=y
-CONFIG_ARCH_THUNDER2=y
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_ARCH_WANTS_NO_INSTR=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CNP=y
-CONFIG_ARM64_CRYPTO=y
-CONFIG_ARM64_EPAN=y
-CONFIG_ARM64_ERRATUM_1165522=y
-CONFIG_ARM64_ERRATUM_1286807=y
-CONFIG_ARM64_ERRATUM_819472=y
-CONFIG_ARM64_ERRATUM_824069=y
-CONFIG_ARM64_ERRATUM_826319=y
-CONFIG_ARM64_ERRATUM_827319=y
-CONFIG_ARM64_ERRATUM_832075=y
-CONFIG_ARM64_ERRATUM_843419=y
-CONFIG_ARM64_HW_AFDBM=y
-CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PAN=y
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_PTR_AUTH=y
-CONFIG_ARM64_PTR_AUTH_KERNEL=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_VA_BITS=48
-CONFIG_ARM64_VA_BITS_48=y
-CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
-CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
-CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
-# CONFIG_ARMADA_37XX_RWTM_MBOX is not set
-CONFIG_ARMADA_37XX_WATCHDOG=y
-CONFIG_ARMADA_THERMAL=y
-CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
-# CONFIG_ARM_DMC620_PMU is not set
-# CONFIG_ARM_MHU_V2 is not set
-CONFIG_ARM_SBSA_WATCHDOG=y
-CONFIG_ARM_SMC_WATCHDOG=y
-CONFIG_ARM_SMMU=y
-# CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT is not set
-# CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS is not set
-CONFIG_ARM_SMMU_V3=y
-# CONFIG_ARM_SMMU_V3_PMU is not set
-# CONFIG_ARM_SMMU_V3_SVA is not set
-CONFIG_AT803X_PHY=y
-CONFIG_ATA=y
-CONFIG_ATOMIC64_SELFTEST=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-# CONFIG_AXI_DMAC is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BLK_PM=y
-CONFIG_CAVIUM_TX2_ERRATUM_219=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CLK_IMX8MM=y
-CONFIG_CLK_IMX8MN=y
-CONFIG_CLK_IMX8MP=y
-CONFIG_CLK_IMX8MQ=y
-CONFIG_CLK_INTEL_SOCFPGA=y
-CONFIG_CLK_INTEL_SOCFPGA64=y
-CONFIG_CLK_LS1028A_PLLDIG=y
-CONFIG_CLK_PX30=y
-CONFIG_CLK_QORIQ=y
-CONFIG_CLK_RK3308=y
-CONFIG_CLK_RK3328=y
-CONFIG_CLK_RK3368=y
-CONFIG_CLK_RK3399=y
-CONFIG_CLK_RK3568=y
-CONFIG_CLK_SP810=y
-CONFIG_CLK_SUNXI=y
-CONFIG_CLK_SUNXI_CLOCKS=y
-# CONFIG_CLK_SUNXI_PRCM_SUN6I is not set
-# CONFIG_CLK_SUNXI_PRCM_SUN8I is not set
-# CONFIG_CLK_SUNXI_PRCM_SUN9I is not set
-CONFIG_CLK_VEXPRESS_OSC=y
-# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
-# CONFIG_COMMON_CLK_FSL_SAI is not set
-CONFIG_COMMON_CLK_HI3516CV300=y
-CONFIG_COMMON_CLK_HI3519=y
-CONFIG_COMMON_CLK_HI3559A=y
-CONFIG_COMMON_CLK_HI3660=y
-CONFIG_COMMON_CLK_HI3670=y
-CONFIG_COMMON_CLK_HI3798CV200=y
-CONFIG_COMMON_CLK_HI6220=y
-CONFIG_COMMON_CLK_HI655X=y
-CONFIG_COMMON_CLK_ROCKCHIP=y
-CONFIG_COMMON_CLK_SCPI=y
-CONFIG_COMMON_CLK_ZYNQMP=y
-CONFIG_COMMON_RESET_HI3660=y
-CONFIG_COMMON_RESET_HI6220=y
-# CONFIG_COMPAT_32BIT_TIME is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_PM=y
-CONFIG_CRYPTO_AES_ARM64=y
-CONFIG_CRYPTO_AES_ARM64_BS=y
-CONFIG_CRYPTO_AES_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y
-CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CHACHA20=y
-CONFIG_CRYPTO_CHACHA20_NEON=y
-CONFIG_CRYPTO_CRYPTD=y
-# CONFIG_CRYPTO_DEV_ALLWINNER is not set
-# CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM is not set
-# CONFIG_CRYPTO_DEV_HISI_HPRE is not set
-# CONFIG_CRYPTO_DEV_HISI_SEC2 is not set
-# CONFIG_CRYPTO_DEV_HISI_TRNG is not set
-# CONFIG_CRYPTO_DEV_OCTEONTX2_CPT is not set
-# CONFIG_CRYPTO_DEV_ROCKCHIP is not set
-# CONFIG_CRYPTO_DEV_ZYNQMP_AES is not set
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SHA256_ARM64=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
-CONFIG_CRYPTO_SHA512_ARM64=y
-CONFIG_CRYPTO_SIMD=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_SUN6I=y
-CONFIG_DRM=y
-CONFIG_DRM_BOCHS=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_GEM_SHMEM_HELPER=y
-# CONFIG_DRM_IMX_DCSS is not set
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-CONFIG_DRM_QXL=y
-CONFIG_DRM_TTM=y
-CONFIG_DRM_TTM_HELPER=y
-CONFIG_DRM_VIRTIO_GPU=y
-CONFIG_DRM_VRAM_HELPER=y
-# CONFIG_DWMAC_SUN8I is not set
-# CONFIG_DWMAC_SUNXI is not set
-CONFIG_DW_WATCHDOG=y
-CONFIG_ENA_ETHERNET=y
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_MX3 is not set
-# CONFIG_FB_XILINX is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FSL_DPAA is not set
-# CONFIG_FSL_DPAA2_QDMA is not set
-CONFIG_FSL_ERRATUM_A008585=y
-# CONFIG_FSL_IMX8_DDR_PMU is not set
-# CONFIG_FSL_PQ_MDIO is not set
-CONFIG_FUJITSU_ERRATUM_010001=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-# CONFIG_GIANFAR is not set
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_GPIO_MXC=y
-CONFIG_GPIO_ROCKCHIP=y
-CONFIG_GPIO_THUNDERX=y
-CONFIG_GPIO_XLP=y
-CONFIG_GPIO_ZYNQ=y
-CONFIG_HDMI=y
-CONFIG_HI3660_MBOX=y
-CONFIG_HI6220_MBOX=y
-CONFIG_HISILICON_LPC=y
-CONFIG_HISI_PMU=y
-CONFIG_HISI_THERMAL=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_ARM_SMCCC_TRNG=y
-# CONFIG_HW_RANDOM_HISI is not set
-CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_ALTERA=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_HIX5HD2 is not set
-CONFIG_I2C_IMX=y
-CONFIG_I2C_IMX_LPI2C=y
-CONFIG_I2C_SYNQUACER=y
-CONFIG_I2C_THUNDERX=y
-# CONFIG_I2C_XLP9XX is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_IMX2_WDT=y
-CONFIG_IMX7ULP_WDT=y
-# CONFIG_IMX8MM_THERMAL is not set
-# CONFIG_IMX_DMA is not set
-# CONFIG_IMX_DSP is not set
-CONFIG_IMX_IRQSTEER=y
-CONFIG_IMX_MBOX=y
-# CONFIG_IMX_SCU is not set
-CONFIG_IMX_SDMA=y
-# CONFIG_IMX_WEIM is not set
-# CONFIG_INPUT_HISI_POWERKEY is not set
-# CONFIG_INTEL_STRATIX10_RSU is not set
-# CONFIG_INTEL_STRATIX10_SERVICE is not set
-CONFIG_INTERCONNECT=y
-CONFIG_INTERCONNECT_IMX=y
-CONFIG_INTERCONNECT_IMX8MM=y
-CONFIG_INTERCONNECT_IMX8MN=y
-CONFIG_INTERCONNECT_IMX8MQ=y
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
-CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
-CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
-CONFIG_IOMMU_SUPPORT=y
-# CONFIG_K3_DMA is not set
-CONFIG_KCMP=y
-# CONFIG_KEYBOARD_SUN4I_LRADC is not set
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_PLATFORM is not set
-# CONFIG_MAILBOX_TEST is not set
-CONFIG_MDIO_SUN4I=y
-# CONFIG_MFD_ALTERA_A10SR is not set
-CONFIG_MFD_ALTERA_SYSMGR=y
-# CONFIG_MFD_AXP20X_RSB is not set
-CONFIG_MFD_CORE=y
-CONFIG_MFD_HI655X_PMIC=y
-# CONFIG_MFD_KHADAS_MCU is not set
-CONFIG_MFD_SUN4I_GPADC=y
-# CONFIG_MFD_SUN6I_PRCM is not set
-CONFIG_MFD_SYSCON=y
-CONFIG_MFD_VEXPRESS_SYSREG=y
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_CAVIUM_THUNDERX=y
-CONFIG_MMC_DW=y
-# CONFIG_MMC_DW_BLUEFIELD is not set
-# CONFIG_MMC_DW_EXYNOS is not set
-# CONFIG_MMC_DW_HI3798CV200 is not set
-# CONFIG_MMC_DW_K3 is not set
-# CONFIG_MMC_DW_PCI is not set
-CONFIG_MMC_DW_PLTFM=y
-CONFIG_MMC_DW_ROCKCHIP=y
-# CONFIG_MMC_MXC is not set
-CONFIG_MMC_RICOH_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ACPI=y
-CONFIG_MMC_SDHCI_CADENCE=y
-CONFIG_MMC_SDHCI_ESDHC_IMX=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
-CONFIG_MMC_SDHCI_PCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SUNXI=y
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MV_XOR is not set
-# CONFIG_MX3_IPU is not set
-CONFIG_MXS_DMA=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-# CONFIG_NET_VENDOR_ALLWINNER is not set
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=64
-CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y
-# CONFIG_NVMEM_IMX_IIM is not set
-CONFIG_NVMEM_IMX_OCOTP=y
-CONFIG_NVMEM_IMX_OCOTP_SCU=y
-# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
-CONFIG_NVMEM_ROCKCHIP_EFUSE=y
-# CONFIG_NVMEM_ROCKCHIP_OTP is not set
-# CONFIG_NVMEM_SNVS_LPGPR is not set
-# CONFIG_NVMEM_SUNXI_SID is not set
-# CONFIG_NVMEM_ZYNQMP is not set
-CONFIG_PCC=y
-CONFIG_PCIE_HISI_STB=y
-CONFIG_PCIE_LAYERSCAPE=y
-CONFIG_PCIE_MOBIVEIL_PLAT=y
-CONFIG_PCIE_ROCKCHIP=y
-# CONFIG_PCIE_ROCKCHIP_DW_HOST is not set
-CONFIG_PCIE_ROCKCHIP_HOST=y
-CONFIG_PCIE_XILINX_CPM=y
-CONFIG_PCIE_XILINX_NWL=y
-CONFIG_PCI_AARDVARK=y
-CONFIG_PCI_IMX6=y
-CONFIG_PCI_LAYERSCAPE=y
-CONFIG_PHY_FSL_IMX8MQ_USB=y
-CONFIG_PHY_HI3660_USB=y
-CONFIG_PHY_HI3670_USB=y
-CONFIG_PHY_HI6220_USB=y
-CONFIG_PHY_HISI_INNO_USB2=y
-# CONFIG_PHY_HISTB_COMBPHY is not set
-CONFIG_PHY_MVEBU_A3700_COMPHY=y
-CONFIG_PHY_MVEBU_A3700_UTMI=y
-CONFIG_PHY_MVEBU_A38X_COMPHY=y
-CONFIG_PHY_MVEBU_CP110_COMPHY=y
-# CONFIG_PHY_ROCKCHIP_DP is not set
-# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
-CONFIG_PHY_ROCKCHIP_EMMC=y
-# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
-# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
-# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
-CONFIG_PHY_ROCKCHIP_INNO_USB2=y
-CONFIG_PHY_ROCKCHIP_PCIE=y
-CONFIG_PHY_ROCKCHIP_TYPEC=y
-# CONFIG_PHY_ROCKCHIP_USB is not set
-CONFIG_PHY_SUN4I_USB=y
-CONFIG_PHY_SUN50I_USB3=y
-# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
-CONFIG_PHY_SUN9I_USB=y
-# CONFIG_PHY_XILINX_ZYNQMP is not set
-CONFIG_PINCTRL_IMX8MM=y
-CONFIG_PINCTRL_IMX8MN=y
-CONFIG_PINCTRL_IMX8MP=y
-CONFIG_PINCTRL_IMX8MQ=y
-CONFIG_PINCTRL_IMX8ULP=y
-CONFIG_PINCTRL_ROCKCHIP=y
-CONFIG_PINCTRL_SUN4I_A10=y
-CONFIG_PINCTRL_SUN50I_A100=y
-CONFIG_PINCTRL_SUN50I_A100_R=y
-CONFIG_PINCTRL_SUN50I_A64=y
-CONFIG_PINCTRL_SUN50I_A64_R=y
-CONFIG_PINCTRL_SUN50I_H5=y
-CONFIG_PINCTRL_SUN50I_H6=y
-CONFIG_PINCTRL_SUN50I_H616=y
-CONFIG_PINCTRL_SUN50I_H616_R=y
-CONFIG_PINCTRL_SUN50I_H6_R=y
-CONFIG_PINCTRL_SUN5I=y
-# CONFIG_PINCTRL_SUN6I_A31 is not set
-# CONFIG_PINCTRL_SUN6I_A31_R is not set
-# CONFIG_PINCTRL_SUN8I_A23 is not set
-# CONFIG_PINCTRL_SUN8I_A23_R is not set
-# CONFIG_PINCTRL_SUN8I_A33 is not set
-# CONFIG_PINCTRL_SUN8I_A83T is not set
-# CONFIG_PINCTRL_SUN8I_A83T_R is not set
-# CONFIG_PINCTRL_SUN8I_H3 is not set
-# CONFIG_PINCTRL_SUN8I_H3_R is not set
-# CONFIG_PINCTRL_SUN8I_V3S is not set
-# CONFIG_PINCTRL_SUN9I_A80 is not set
-# CONFIG_PINCTRL_SUN9I_A80_R is not set
-CONFIG_PINCTRL_ZYNQMP=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_HISI=y
-CONFIG_POWER_RESET_VEXPRESS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_QORIQ_THERMAL=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_ANATOP=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_HI655X=y
-CONFIG_REGULATOR_PFUZE100=y
-# CONFIG_REGULATOR_VEXPRESS is not set
-CONFIG_RESET_IMX7=y
-CONFIG_ROCKCHIP_IODOMAIN=y
-CONFIG_ROCKCHIP_IOMMU=y
-# CONFIG_ROCKCHIP_MBOX is not set
-CONFIG_ROCKCHIP_PM_DOMAINS=y
-# CONFIG_ROCKCHIP_SARADC is not set
-# CONFIG_ROCKCHIP_THERMAL is not set
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
-# CONFIG_RTC_DRV_IMXDI is not set
-CONFIG_RTC_DRV_MV=y
-# CONFIG_RTC_DRV_MXC is not set
-# CONFIG_RTC_DRV_MXC_V2 is not set
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_HOST=y
-# CONFIG_SERIAL_8250_EXAR is not set
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_IMX_EARLYCON=y
-CONFIG_SERIAL_MVEBU_CONSOLE=y
-CONFIG_SERIAL_MVEBU_UART=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-# CONFIG_SMC91X is not set
-# CONFIG_SND_SUN4I_I2S is not set
-# CONFIG_SND_SUN50I_CODEC_ANALOG is not set
-# CONFIG_SND_SUN50I_DMIC is not set
-# CONFIG_SND_SUN8I_CODEC is not set
-# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
-# CONFIG_SNI_NETSEC is not set
-CONFIG_SOC_IMX8M=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPI_ARMADA_3700=y
-# CONFIG_SPI_FSL_LPSPI is not set
-# CONFIG_SPI_FSL_QUADSPI is not set
-# CONFIG_SPI_HISI_KUNPENG is not set
-# CONFIG_SPI_HISI_SFC is not set
-# CONFIG_SPI_HISI_SFC_V3XX is not set
-# CONFIG_SPI_IMX is not set
-# CONFIG_SPI_ROCKCHIP_SFC is not set
-# CONFIG_SPI_SUN4I is not set
-# CONFIG_SPI_SUN6I is not set
-# CONFIG_SPI_SYNQUACER is not set
-CONFIG_SPI_THUNDERX=y
-# CONFIG_SPI_XLP is not set
-CONFIG_STUB_CLK_HI3660=y
-CONFIG_STUB_CLK_HI6220=y
-CONFIG_SUN50I_A100_CCU=y
-CONFIG_SUN50I_A100_R_CCU=y
-CONFIG_SUN50I_A64_CCU=y
-CONFIG_SUN50I_H616_CCU=y
-CONFIG_SUN50I_H6_CCU=y
-CONFIG_SUN50I_H6_R_CCU=y
-CONFIG_SUN50I_IOMMU=y
-CONFIG_SUN6I_MSGBOX=y
-# CONFIG_SUN8I_A83T_CCU is not set
-CONFIG_SUN8I_DE2_CCU=y
-# CONFIG_SUN8I_H3_CCU is not set
-CONFIG_SUN8I_R_CCU=y
-CONFIG_SUN8I_THERMAL=y
-CONFIG_SUNXI_CCU=y
-CONFIG_SUNXI_RSB=y
-CONFIG_SUNXI_WATCHDOG=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-# CONFIG_TCG_TIS_SYNQUACER is not set
-CONFIG_THREAD_INFO_IN_TASK=y
-# CONFIG_TURRIS_MOX_RWTM is not set
-CONFIG_TYPEC=y
-# CONFIG_TYPEC_DP_ALTMODE is not set
-# CONFIG_TYPEC_FUSB302 is not set
-# CONFIG_TYPEC_HD3SS3220 is not set
-# CONFIG_TYPEC_MUX_PI3USB30532 is not set
-# CONFIG_TYPEC_RT1711H is not set
-# CONFIG_TYPEC_STUSB160X is not set
-CONFIG_TYPEC_TCPCI=y
-# CONFIG_TYPEC_TCPCI_MAXIM is not set
-CONFIG_TYPEC_TCPM=y
-# CONFIG_TYPEC_TPS6598X is not set
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_CHIPIDEA_IMX=y
-CONFIG_USB_CHIPIDEA_MSM=y
-CONFIG_USB_CHIPIDEA_UDC=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_DUAL_ROLE=y
-CONFIG_USB_DWC3_HAPS=y
-CONFIG_USB_DWC3_IMX8MP=y
-CONFIG_USB_DWC3_OF_SIMPLE=y
-CONFIG_USB_DWC3_XILINX=y
-CONFIG_USB_EHCI_FSL=y
-# CONFIG_USB_EHCI_HCD_ORION is not set
-CONFIG_USB_MXS_PHY=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_HISTB=y
-CONFIG_USB_XHCI_MVEBU=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_VEXPRESS_CONFIG=y
-CONFIG_VIDEOMODE_HELPERS=y
-# CONFIG_VIDEO_SUN4I_CSI is not set
-# CONFIG_VIDEO_SUN6I_CSI is not set
-CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
-# CONFIG_VIRTIO_IOMMU is not set
-CONFIG_VMAP_STACK=y
-CONFIG_WDAT_WDT=y
-# CONFIG_XILINX_AMS is not set
-# CONFIG_XILINX_INTC is not set
-CONFIG_ZONE_DMA32=y
-CONFIG_ZYNQMP_FIRMWARE=y
-# CONFIG_ZYNQMP_FIRMWARE_DEBUG is not set
-CONFIG_ZYNQMP_PM_DOMAINS=y
-CONFIG_ZYNQMP_POWER=y
+++ /dev/null
-ARCH:=aarch64
-SUBTARGET:=64
-BOARDNAME:=64-bit ARM machines
-
-define Target/Description
- Build multi-platform images for the ARMv8 instruction set architecture
-endef
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Copyright (C) 2017 Yousong Zhou <yszhou4tech@gmail.com>
-
-include $(TOPDIR)/rules.mk
-
-BOARD:=armvirt
-BOARDNAME:=QEMU ARM Virtual Machine
-FEATURES:=fpu pci pcie rtc usb boot-part rootfs-part
-FEATURES+=cpiogz ext4 ramdisk squashfs targz vmdk
-
-KERNEL_PATCHVER:=5.15
-
-include $(INCLUDE_DIR)/target.mk
-
-DEFAULT_PACKAGES += mkf2fs e2fsprogs
-# blkid used for resolving PARTUUID
-# in sysupgrade
-DEFAULT_PACKAGES += blkid
-
-$(eval $(call BuildTarget))
+++ /dev/null
-This target generates images that can be used on ARM machines with EFI
-support (e.g EDKII/TianoCore or U-Boot with bootefi).
-
-The kernel and filesystem images can also be used directly by QEMU:
-
-Run with qemu-system-arm
-
- # boot with initramfs embedded in
- qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armvirt-32-generic-initramfs-kernel.bin
-
- # boot with accel=kvm
- qemu-system-arm -nographic -M virt,accel=kvm -cpu host -m 64 -kernel
- openwrt-armvirt-32-generic-initramfs-kernel.bin
-
- # boot with a separate rootfs
- qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armvirt-32-generic-kernel.bin \
- -drive file=openwrt-armvirt-32-generic-ext4-rootfs.img,format=raw,if=virtio -append 'root=/dev/vda rootwait'
-
- # boot with local dir as rootfs
- qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armvirt-32-generic-kernel.bin \
- -fsdev local,id=rootdev,path=root-armvirt/,security_model=none \
- -device virtio-9p-pci,fsdev=rootdev,mount_tag=/dev/root \
- -append 'rootflags=trans=virtio,version=9p2000.L,cache=loose rootfstype=9p'
-
-Run with kvmtool
-
- # start a named machine
- lkvm run -k openwrt-armvirt-32-zImage -i openwrt-armvirt-32-rootfs.cpio --name armvirt0
-
- # start with virtio-9p rootfs
- lkvm run -k openwrt-armvirt-32-zImage -d root-armvirt/
-
- # stop "armvirt0"
- lkvm stop --name armvirt0
-
- # stop all
- lkvm stop --all
-
-The multi-platform ARMv8 target can be used with QEMU:
-
- qemu-system-aarch64 -machine virt -cpu cortex-a57 -nographic \
- -kernel openwrt-armvirt-64-generic-initramfs-kernel.bin \
-
-With a EDKII or U-Boot binary for the QEMU ARM virtual machines, you can use these
-images in EFI mode:
-
-32-bit:
-gunzip -c bin/targets/armvirt/32/openwrt-armvirt-32-generic-ext4-combined.img.gz > openwrt-arm-32.img
-qemu-system-arm -nographic \
- -cpu cortex-a15 -machine virt \
- -bios QEMU_EFI_32.fd \
- -smp 1 -m 1024 \
- -device virtio-rng-pci \
- -drive file=openwrt-arm-32.img,format=raw,index=0,media=disk \
- -netdev user,id=testlan -net nic,netdev=testlan \
- -netdev user,id=testwan -net nic,netdev=testwan
-
-64-bit:
-gunzip -c bin/targets/armvirt/64/openwrt-armvirt-64-generic-ext4-combined.img.gz > openwrt-arm-64.img
-qemu-system-aarch64 -nographic \
- -cpu cortex-a53 -machine virt \
- -bios QEMU_EFI_64.fd \
- -smp 1 -m 1024 \
- -device virtio-rng-pci \
- -drive file=openwrt-arm-64.img,format=raw,index=0,media=disk \
- -netdev user,id=testlan -net nic,netdev=testlan \
- -netdev user,id=testwan -net nic,netdev=testwan
-
-One can find EFI/BIOS binaries from:
-- Compile mainline U-Boot for the QEMU ARM virtual machine (qemu_arm_defconfig/qemu_arm64_defconfig)
-- From distribution packages (such as qemu-efi-arm and qemu-efi-aarch64 in Debian)
-- Community builds, like retrage/edk2-nightly: https://retrage.github.io/edk2-nightly/
+++ /dev/null
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(board_name)
-
-case "$board" in
-traverse,ten64)
- ucidef_set_led_netdev "sfp1" "SFP 1" "ten64:green:sfp1:down" "eth8" "link tx rx"
- ucidef_set_led_netdev "sfp2" "SFP 2" "ten64:green:sfp2:up" "eth9" "link tx rx"
- ;;
-esac
-
-board_config_flush
-
-exit 0
+++ /dev/null
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-. /lib/functions/system.sh
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-case "$(board_name)" in
- traverse,ten64)
- ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
- ucidef_set_interface_wan "eth6"
- ;;
-esac
-
-board_config_flush
-
-exit 0
+++ /dev/null
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(board_name)
-
-case "$board" in
-traverse,ten64)
- ucidef_add_gpio_switch "lte_reset" "Cell Modem Reset" "376"
- ucidef_add_gpio_switch "lte_power" "Cell Modem Power" "377"
- ucidef_add_gpio_switch "lte_disable" "Cell Modem Airplane mode" "378"
- ucidef_add_gpio_switch "gnss_disable" "Cell Modem Disable GNSS receiver" "379"
- ucidef_add_gpio_switch "lower_sfp_txidsable" "Lower SFP+ TX Disable" "369"
- ucidef_add_gpio_switch "upper_sfp_txdisable" "Upper SFP+ TX Disable" "373"
- ;;
-esac
-
-board_config_flush
-
-exit 0
+++ /dev/null
-::sysinit:/etc/init.d/rcS S boot
-::shutdown:/etc/init.d/rcS K shutdown
-ttyAMA0::askfirst:/usr/libexec/login.sh
-ttyS0::askfirst:/usr/libexec/login.sh
-tty0::askfirst:/usr/libexec/login.sh
-hvc0::askfirst:/usr/libexec/login.sh
-ttymxc0::askfirst:/usr/libexec/login.sh
-ttymxc1::askfirst:/usr/libexec/login.sh
-ttymxc2::askfirst:/usr/libexec/login.sh
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-sanitize_name_arm64() {
- sed -e '
- y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/;
- s/[^a-z0-9_-]\+/-/g;
- s/^-//;
- s/-$//;
- ' "$@"
-}
-
-do_sysinfo_arm64() {
- local vendor product file
-
- for file in sys_vendor board_vendor; do
- vendor="$(cat /sys/devices/virtual/dmi/id/$file 2>/dev/null)"
- case "$vendor" in
- empty | \
- System\ manufacturer | \
- To\ [bB]e\ [fF]illed\ [bB]y\ O\.E\.M\.)
- continue
- ;;
- esac
- [ -n "$vendor" ] && break
- done
-
- for file in product_name board_name; do
- product="$(cat /sys/devices/virtual/dmi/id/$file 2>/dev/null)"
- case "$vendor:$product" in
- ?*:empty | \
- ?*:System\ Product\ Name | \
- ?*:To\ [bB]e\ [fF]illed\ [bB]y\ O\.E\.M\.)
- continue
- ;;
- ?*:?*)
- break
- ;;
- esac
- done
-
- [ -d "/sys/firmware/devicetree/base" ] && return
-
- [ -n "$vendor" -a -n "$product" ] || return
-
- mkdir -p /tmp/sysinfo
-
- echo "$vendor $product" > /tmp/sysinfo/model
-
- sanitize_name_arm64 /tmp/sysinfo/model > /tmp/sysinfo/board_name
-}
-
-boot_hook_add preinit_main do_sysinfo_arm64
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-RAMFS_COPY_BIN="/usr/sbin/blkid"
-
-platform_check_image() {
- local board=$(board_name)
- local diskdev partdev diff
- [ "$#" -gt 1 ] && return 1
-
- v "Board is ${board}"
-
- export_bootdevice && export_partdevice diskdev 0 || {
- v "platform_check_image: Unable to determine upgrade device"
- return 1
- }
-
- get_partitions "/dev/$diskdev" bootdisk
-
- v "Extract boot sector from the image"
- get_image_dd "$1" of=/tmp/image.bs count=63 bs=512b
-
- get_partitions /tmp/image.bs image
-
- #compare tables
- diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
-
- rm -f /tmp/image.bs /tmp/partmap.bootdisk /tmp/partmap.image
-
- if [ -n "$diff" ]; then
- v "Partition layout has changed. Full image will be written."
- ask_bool 0 "Abort" && exit 1
- return 0
- fi
-}
-
-platform_copy_config() {
- local partdev parttype=ext4
-
- if export_partdevice partdev 2; then
- mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt
- cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
- umount /mnt
- else
- v "ERROR: Unable to find partition to copy config data to"
- fi
-
- sleep 5
-}
-
-# To avoid writing over any firmware
-# files (e.g ubootefi.var or firmware/X/ aka EBBR)
-# Copy efi/openwrt and efi/boot from the new image
-# to the existing ESP
-platform_do_upgrade_efi_system_partition() {
- local image_file=$1
- local target_partdev=$2
- local image_efisp_start=$3
- local image_efisp_size=$4
-
- v "Updating ESP on ${target_partdev}"
- NEW_ESP_DIR="/mnt/new_esp_loop"
- CUR_ESP_DIR="/mnt/cur_esp"
- mkdir "${NEW_ESP_DIR}"
- mkdir "${CUR_ESP_DIR}"
-
- get_image_dd "$image_file" of="/tmp/new_efi_sys_part.img" \
- skip="$image_efisp_start" count="$image_efisp_size"
-
- mount -t vfat -o loop -o ro /tmp/new_efi_sys_part.img "${NEW_ESP_DIR}"
- if [ ! -d "${NEW_ESP_DIR}/efi/boot" ]; then
- v "ERROR: Image does not contain EFI boot files (/efi/boot)"
- return 1
- fi
-
- mount -t vfat "/dev/$partdev" "${CUR_ESP_DIR}"
-
- for d in $(find "${NEW_ESP_DIR}/efi/" -mindepth 1 -maxdepth 1 -type d); do
- v "Copying ${d}"
- newdir_bname=$(basename "${d}")
- rm -rf "${CUR_ESP_DIR}/efi/${newdir_bname}"
- cp -r "${d}" "${CUR_ESP_DIR}/efi"
- done
-
- umount "${NEW_ESP_DIR}"
- umount "${CUR_ESP_DIR}"
-}
-
-platform_do_upgrade() {
- local board=$(board_name)
- local diskdev partdev diff
-
- export_bootdevice && export_partdevice diskdev 0 || {
- v "platform_do_upgrade: Unable to determine upgrade device"
- return 1
- }
-
- sync
-
- if [ "$UPGRADE_OPT_SAVE_PARTITIONS" = "1" ]; then
- get_partitions "/dev/$diskdev" bootdisk
-
- v "Extract boot sector from the image"
- get_image_dd "$1" of=/tmp/image.bs count=63 bs=512b
-
- get_partitions /tmp/image.bs image
-
- #compare tables
- diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
- else
- diff=1
- fi
-
- # Only change the partition table if sysupgrade -p is set,
- # otherwise doing so could interfere with embedded "single storage"
- # (e.g SoC boot from SD card) setups, as well as other user
- # created storage (like uvol)
- if [ -n "$diff" ] && [ "${UPGRADE_OPT_SAVE_PARTITIONS}" = "0" ]; then
- # Need to remove partitions before dd, otherwise the partitions
- # that are added after will have minor numbers offset
- partx -d - "/dev/$diskdev"
-
- get_image_dd "$1" of="/dev/$diskdev" bs=4096 conv=fsync
-
- # Separate removal and addtion is necessary; otherwise, partition 1
- # will be missing if it overlaps with the old partition 2
- partx -a - "/dev/$diskdev"
-
- return 0
- fi
-
- #iterate over each partition from the image and write it to the boot disk
- while read part start size; do
- if export_partdevice partdev $part; then
- v "Writing image to /dev/$partdev..."
- if [ "$part" = "1" ]; then
- platform_do_upgrade_efi_system_partition \
- $1 $partdev $start $size || return 1
- else
- v "Normal partition, doing DD"
- get_image_dd "$1" of="/dev/$partdev" ibs=512 obs=1M skip="$start" \
- count="$size" conv=fsync
- fi
- else
- v "Unable to find partition $part device, skipped."
- fi
- done < /tmp/partmap.image
-
- local parttype=ext4
-
- if (blkid > /dev/null) && export_partdevice partdev 1; then
- part_magic_fat "/dev/$partdev" && parttype=vfat
- mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt
- if export_partdevice partdev 2; then
- THIS_PART_BLKID=$(blkid -o value -s PARTUUID "/dev/${partdev}")
- v "Setting rootfs PARTUUID=${THIS_PART_BLKID}"
- sed -i "s/\(PARTUUID=\)[a-f0-9-]\+/\1${THIS_PART_BLKID}/ig" \
- /mnt/efi/openwrt/grub.cfg
- fi
- umount /mnt
- fi
- # Provide time for the storage medium to flush before system reset
- # (despite the sync/umount it appears NVMe etc. do it in the background)
- sleep 5
-}
+++ /dev/null
-CONFIG_64BIT=y
-CONFIG_9P_FS=y
-# CONFIG_9P_FS_POSIX_ACL is not set
-# CONFIG_9P_FS_SECURITY is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_APEI=y
-CONFIG_ACPI_APEI_EINJ=y
-# CONFIG_ACPI_APEI_ERST_DEBUG is not set
-CONFIG_ACPI_APEI_GHES=y
-CONFIG_ACPI_APEI_MEMORY_FAILURE=y
-CONFIG_ACPI_APEI_PCIEAER=y
-CONFIG_ACPI_BATTERY=y
-# CONFIG_ACPI_BGRT is not set
-CONFIG_ACPI_CCA_REQUIRED=y
-CONFIG_ACPI_CONTAINER=y
-CONFIG_ACPI_CPPC_CPUFREQ=y
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_DEBUGGER is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_EC_DEBUGFS is not set
-CONFIG_ACPI_FAN=y
-CONFIG_ACPI_GENERIC_GSI=y
-CONFIG_ACPI_GTDT=y
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_I2C_OPREGION=y
-CONFIG_ACPI_IORT=y
-CONFIG_ACPI_MCFG=y
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_PPTT=y
-CONFIG_ACPI_PROCESSOR=y
-CONFIG_ACPI_PROCESSOR_IDLE=y
-CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
-CONFIG_ACPI_SPCR_TABLE=y
-CONFIG_ACPI_THERMAL=y
-# CONFIG_ACPI_TINY_POWER_BUTTON is not set
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANTS_NO_INSTR=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-# CONFIG_ARM64_ACPI_PARKING_PROTOCOL is not set
-CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_BALLOON_COMPACTION=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NVME=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_MQ_VIRTIO=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-# CONFIG_COMPAT_32BIT_TIME is not set
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ACPI=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMI=y
-CONFIG_DMIID=y
-CONFIG_DMI_SYSFS=y
-CONFIG_DTC=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EFI=y
-CONFIG_EFIVAR_FS=y
-CONFIG_EFI_ARMSTUB_DTB_LOADER=y
-# CONFIG_EFI_BOOTLOADER_CONTROL is not set
-# CONFIG_EFI_CAPSULE_LOADER is not set
-# CONFIG_EFI_CUSTOM_SSDT_OVERLAYS is not set
-# CONFIG_EFI_DISABLE_PCI_DMA is not set
-CONFIG_EFI_EARLYCON=y
-CONFIG_EFI_ESRT=y
-CONFIG_EFI_GENERIC_STUB=y
-# CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER is not set
-CONFIG_EFI_PARAMS_FROM_FDT=y
-CONFIG_EFI_RUNTIME_WRAPPERS=y
-CONFIG_EFI_STUB=y
-# CONFIG_EFI_TEST is not set
-CONFIG_EXT4_FS=y
-CONFIG_F2FS_FS=y
-CONFIG_FAILOVER=y
-CONFIG_FB_EFI=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_AUTOSELECT=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_ACPI=y
-CONFIG_GPIO_CDEV=y
-# CONFIG_GPIO_HISI is not set
-CONFIG_GPIO_PL061=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HID=y
-CONFIG_HID_GENERIC=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HOTPLUG_PCI_ACPI=y
-CONFIG_HVC_DRIVER=y
-CONFIG_HZ_PERIODIC=y
-# CONFIG_I2C_AMD_MP2 is not set
-CONFIG_I2C_HID_ACPI=y
-# CONFIG_I2C_HISI is not set
-# CONFIG_I2C_SLAVE_TESTUNIT is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISCSI_IBFT is not set
-CONFIG_JBD2=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY_BALLOON=y
-CONFIG_MIGRATION=y
-# CONFIG_MLXBF_GIGE is not set
-CONFIG_MMC_SDHCI_ACPI=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_MVMDIO=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_9P=y
-# CONFIG_NET_9P_DEBUG is not set
-CONFIG_NET_9P_VIRTIO=y
-CONFIG_NET_FAILOVER=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NR_CPUS=256
-CONFIG_NVMEM=y
-CONFIG_NVME_CORE=y
-# CONFIG_NVME_MULTIPATH is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_PADATA=y
-CONFIG_PAGE_REPORTING=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI=y
-# CONFIG_PCIE_HISI_ERR is not set
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_ECAM=y
-CONFIG_PCI_HOST_COMMON=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCI_LABEL=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-# CONFIG_PMIC_OPREGION is not set
-CONFIG_PNP=y
-CONFIG_PNPACPI=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RATIONAL=y
-# CONFIG_RESET_ATTACK_MITIGATION is not set
-CONFIG_RFS_ACCEL=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_EFI=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SCSI=y
-CONFIG_SCSI_COMMON=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SOCK_RX_QUEUE_MAPPING=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-# CONFIG_SURFACE_PLATFORMS is not set
-CONFIG_SWIOTLB=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYSFB=y
-# CONFIG_SYSFB_SIMPLEFB is not set
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_ACPI=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-# CONFIG_UACCE is not set
-CONFIG_UCS2_STRING=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB=y
-CONFIG_USB_HID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_PCI=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PCI=y
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_PCI_LEGACY=y
-CONFIG_VIRTIO_PCI_LIB=y
-CONFIG_VMAP_STACK=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_WDAT_WDT=y
-CONFIG_XPS=y
-CONFIG_ZONE_DMA32=y
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Copyright (C) 2016-2017 Yousong Zhou <yszhou4tech@gmail.com>
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-GRUB2_VARIANT =
-GRUB_TERMINALS =
-GRUB_SERIAL_CONFIG =
-GRUB_TERMINAL_CONFIG =
-GRUB_CONSOLE_CMDLINE = earlycon
-
-ifneq ($(CONFIG_GRUB_CONSOLE),)
- GRUB_TERMINALS += console
-endif
-
-GRUB_SERIAL:=$(call qstrip,$(CONFIG_GRUB_SERIAL))
-
-ifneq ($(GRUB_SERIAL),)
- GRUB_SERIAL_CONFIG := serial --unit=0 --speed=$(CONFIG_GRUB_BAUDRATE) --word=8 --parity=no --stop=1 --rtscts=$(if $(CONFIG_GRUB_FLOWCONTROL),on,off)
- GRUB_TERMINALS += serial
-endif
-
-ifneq ($(GRUB_TERMINALS),)
- GRUB_TERMINAL_CONFIG := terminal_input $(GRUB_TERMINALS); terminal_output $(GRUB_TERMINALS)
-endif
-
-ROOTPART:=$(call qstrip,$(CONFIG_TARGET_ROOTFS_PARTNAME))
-ROOTPART:=$(if $(ROOTPART),$(ROOTPART),PARTUUID=$(IMG_PART_SIGNATURE)-02)
-GPT_ROOTPART:=$(call qstrip,$(CONFIG_TARGET_ROOTFS_PARTNAME))
-GPT_ROOTPART:=$(if $(GPT_ROOTPART),$(GPT_ROOTPART),PARTUUID=$(shell echo $(IMG_PART_DISKGUID) | sed 's/00$$/02/'))
-
-GRUB_TIMEOUT:=$(call qstrip,$(CONFIG_GRUB_TIMEOUT))
-GRUB_TITLE:=$(call qstrip,$(CONFIG_GRUB_TITLE))
-
-BOOTOPTS:=$(call qstrip,$(CONFIG_GRUB_BOOTOPTS))
-
-define Build/combined
- $(INSTALL_DIR) $@.boot/
- $(CP) $(KDIR)/$(KERNEL_NAME) $@.boot/efi/openwrt/
- -$(CP) $(STAGING_DIR_ROOT)/boot/. $@.boot/boot/
- $(if $(filter $(1),efi),
- $(INSTALL_DIR) $@.boot/efi/boot
- $(CP) $(STAGING_DIR_IMAGE)/grub2/boot$(if $(CONFIG_aarch64),aa64,arm).efi $@.boot/efi/openwrt/
- $(CP) $(STAGING_DIR_IMAGE)/grub2/boot$(if $(CONFIG_aarch64),aa64,arm).efi $@.boot/efi/boot/
- )
- KERNELPARTTYPE=ef FAT_TYPE="32" PADDING="1" SIGNATURE="$(IMG_PART_SIGNATURE)" \
- $(if $(filter $(1),efi),GUID="$(IMG_PART_DISKGUID)") $(SCRIPT_DIR)/gen_image_generic.sh \
- $@ \
- $(CONFIG_TARGET_KERNEL_PARTSIZE) $@.boot \
- $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS) \
- 256
-endef
-
-define Build/grub-config
- rm -fR $@.boot
- $(INSTALL_DIR) $@.boot/efi/openwrt/
- sed \
- -e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
- -e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
- -e 's#@ROOTPART@#root=$(ROOTPART) rootwait#g' \
- -e 's#@GPT_ROOTPART@#root=$(GPT_ROOTPART) rootwait#g' \
- -e 's#@CMDLINE@#$(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE)#g' \
- -e 's#@TIMEOUT@#$(GRUB_TIMEOUT)#g' \
- -e 's#@TITLE@#$(GRUB_TITLE)#g' \
- -e 's#@KERNEL_NAME@#$(KERNEL_NAME)#g' \
- ./grub-$(1).cfg > $@.boot/efi/openwrt/grub.cfg
-endef
-
-define Build/grub-install
- rm -fR $@.grub2
- $(INSTALL_DIR) $@.grub2
-endef
-
-DEVICE_VARS += GRUB2_VARIANT
-define Device/efi-default
- IMAGE/rootfs.img := append-rootfs | pad-to $(ROOTFS_PARTSIZE)
- IMAGE/rootfs.img.gz := append-rootfs | pad-to $(ROOTFS_PARTSIZE) | gzip
- IMAGE/combined.img := grub-config efi | combined efi | grub-install efi | append-metadata
- IMAGE/combined.img.gz := grub-config efi | combined efi | grub-install efi | gzip | append-metadata
- IMAGE/combined.vmdk := grub-config efi | combined efi | grub-install efi | qemu-image vmdk
- ifeq ($(CONFIG_TARGET_IMAGES_GZIP),y)
- IMAGES-y := rootfs.img.gz
- IMAGES-y += combined.img.gz
- else
- IMAGES-y := rootfs.img
- IMAGES-y += combined.img
- endif
- ifeq ($(CONFIG_VMDK_IMAGES),y)
- IMAGES-y += combined.vmdk
- endif
- KERNEL := kernel-bin
- KERNEL_INSTALL := 1
- IMAGES := $$(IMAGES-y)
- ARTIFACTS := $$(ARTIFACTS-y)
- SUPPORTED_DEVICES :=
- ifeq ($(CONFIG_arm),y)
- KERNEL_NAME = zImage
- endif
-endef
-
-define Device/generic
- $(call Device/efi-default)
- DEVICE_TITLE := Generic EFI Boot
- GRUB2_VARIANT := generic
- FILESYSTEMS := ext4 squashfs
- DEVICE_PACKAGES += kmod-amazon-ena kmod-e1000e kmod-vmxnet3 kmod-rtc-rx8025 \
- kmod-i2c-mux-pca954x kmod-gpio-pca953x partx-utils kmod-wdt-sp805 \
- kmod-mvneta kmod-mvpp2 kmod-fsl-dpaa1-net kmod-fsl-dpaa2-net \
- kmod-fsl-enetc-net kmod-dwmac-imx kmod-fsl-fec kmod-thunderx-net \
- kmod-dwmac-rockchip kmod-dwmac-sun8i kmod-phy-aquantia kmod-phy-broadcom \
- kmod-phy-marvell kmod-phy-marvell-10g kmod-atlantic
-endef
-TARGET_DEVICES += generic
-
-$(eval $(call BuildImage))
+++ /dev/null
-@SERIAL_CONFIG@
-@TERMINAL_CONFIG@
-
-set default="0"
-set timeout="@TIMEOUT@"
-
-menuentry "@TITLE@" {
- search --set=root --label kernel
- linux /efi/openwrt/@KERNEL_NAME@ @GPT_ROOTPART@ @CMDLINE@ noinitrd
-}
-menuentry "@TITLE@ (failsafe)" {
- search --set=root --label kernel
- linux /efi/openwrt/@KERNEL_NAME@ failsafe=true @GPT_ROOTPART@ @CMDLINE@ noinitrd
-}
+++ /dev/null
-define KernelPackage/acpi-mdio
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=ACPI MDIO support
- DEPENDS:=@(TARGET_armvirt_64) +kmod-libphy +kmod-mdio-devres
- KCONFIG:=CONFIG_ACPI_MDIO
- FILES:=$(LINUX_DIR)/drivers/net/mdio/acpi_mdio.ko
- AUTOLOAD:=$(call AutoLoad,11,acpi_mdio)
-endef
-
-define KernelPackage/acpi-mdio/description
- Kernel driver for ACPI MDIO support
-endef
-
-$(eval $(call KernelPackage,acpi-mdio))
-
-define KernelPackage/fsl-pcs-lynx
- SUBMENU=$(NETWORK_DEVICES_MENU)
- DEPENDS:=@(TARGET_armvirt_64) +kmod-libphy +kmod-of-mdio +kmod-phylink
- TITLE:=NXP (Freescale) Lynx PCS
- HIDDEN:=1
- KCONFIG:=CONFIG_PCS_LYNX
- FILES=$(LINUX_DIR)/drivers/net/pcs/pcs-lynx.ko
- AUTOLOAD=$(call AutoLoad,30,pcs-lynx)
-endef
-
-$(eval $(call KernelPackage,fsl-pcs-lynx))
-
-define KernelPackage/pcs-xpcs
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=Synopsis DesignWare PCS driver
- DEPENDS:=@(TARGET_armvirt_64)
- KCONFIG:=CONFIG_PCS_XPCS
- FILES:=$(LINUX_DIR)/drivers/net/pcs/pcs_xpcs.ko
- AUTOLOAD:=$(call AutoLoad,20,pcs_xpcs)
-endef
-
-$(eval $(call KernelPackage,pcs-xpcs))
-
-define KernelPackage/fsl-fec
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- DEPENDS:=@(TARGET_armvirt_64) +kmod-libphy +kmod-of-mdio \
- +kmod-ptp +kmod-net-selftests
- TITLE:=NXP (Freescale) FEC Ethernet controller (i.MX)
- KCONFIG:=CONFIG_FEC
- FILES:=$(LINUX_DIR)/drivers/net/ethernet/freescale/fec.ko
- AUTOLOAD:=$(call AutoLoad,35,fec)
-endef
-
-$(eval $(call KernelPackage,fsl-fec))
-
-define KernelPackage/fsl-xgmac-mdio
- SUBMENU=$(NETWORK_DEVICES_MENU)
- DEPENDS:=@(TARGET_armvirt_64) +kmod-libphy +kmod-of-mdio +kmod-acpi-mdio
- TITLE:=NXP (Freescale) MDIO bus
- KCONFIG:=CONFIG_FSL_XGMAC_MDIO
- FILES=$(LINUX_DIR)/drivers/net/ethernet/freescale/xgmac_mdio.ko
- AUTOLOAD=$(call AutoLoad,30,xgmac_mdio)
-endef
-
-$(eval $(call KernelPackage,fsl-xgmac-mdio))
-
-define KernelPackage/fsl-mc-dpio
- SUBMENU:=$(OTHER_MENU)
- TITLE:=NXP DPAA2 DPIO (Data Path IO) driver
- HIDDEN:=1
- KCONFIG:=CONFIG_FSL_MC_BUS=y \
- CONFIG_FSL_MC_DPIO
- FILES:=$(LINUX_DIR)/drivers/soc/fsl/dpio/fsl-mc-dpio.ko
- AUTOLOAD=$(call AutoLoad,30,fsl-mc-dpio)
-endef
-
-$(eval $(call KernelPackage,fsl-mc-dpio))
-
-define KernelPackage/fsl-enetc-net
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=:NXP ENETC (LS1028A) Ethernet
- DEPENDS:=@(TARGET_armvirt_64) +kmod-phylink +kmod-fsl-pcs-lynx
- KCONFIG:= \
- CONFIG_FSL_ENETC \
- CONFIG_FSL_ENETC_VF \
- CONFIG_FSL_ENETC_QOS
- FILES:= \
- $(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc.ko \
- $(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc-vf.ko \
- $(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc-mdio.ko \
- $(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc-ierb.ko
- AUTOLOAD=$(call AutoLoad,35,fsl-enetc)
-endef
-
-$(eval $(call KernelPackage,fsl-enetc-net))
-
-define KernelPackage/fsl-dpaa1-net
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=NXP DPAA1 (LS1043/LS1046) Ethernet
- DEPENDS:=@(TARGET_armvirt_64) +kmod-fsl-xgmac-mdio +kmod-libphy +kmod-crypto-crc32
- KCONFIG:= \
- CONFIG_FSL_DPAA=y \
- CONFIG_FSL_DPAA_ETH \
- CONFIG_FSL_FMAN \
- CONFIG_FSL_DPAA_CHECKING=n \
- CONFIG_FSL_BMAN_TEST=n \
- CONFIG_FSL_QMAN_TEST=n
- MODULES:= \
- $(LINUX_DIR)/drivers/net/ethernet/freescale/dpaa/fsl_dpa.ko \
- $(LINUX_DIR)/drivers/net/ethernet/freescale/fman/fsl_dpaa_fman.ko \
- $(LINUX_DIR)/drivers/net/ethernet/freescale/fman/fsl_dpaa_mac.ko
- AUTOLOAD=$(call AutoLoad,35,fsl-dpa)
-endef
-
-$(eval $(call KernelPackage,fsl-dpaa1-net))
-
-define KernelPackage/fsl-dpaa2-net
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=NXP DPAA2 Ethernet
- DEPENDS:=@(TARGET_armvirt_64) +kmod-fsl-xgmac-mdio +kmod-phylink \
- +kmod-fsl-pcs-lynx +kmod-fsl-mc-dpio
- KCONFIG:= \
- CONFIG_FSL_MC_UAPI_SUPPORT=y \
- CONFIG_FSL_DPAA2_ETH
- FILES:= \
- $(LINUX_DIR)/drivers/net/ethernet/freescale/dpaa2/fsl-dpaa2-eth.ko
- AUTOLOAD=$(call AutoLoad,35,fsl-dpaa2-eth)
-endef
-
-$(eval $(call KernelPackage,fsl-dpaa2-net))
-
-define KernelPackage/fsl-dpaa2-console
- SUBMENU:=$(OTHER_MENU)
- TITLE:=NXP DPAA2 Debug console
- DEPENDS:=@(TARGET_armvirt_64)
- KCONFIG:=CONFIG_DPAA2_CONSOLE
- FILES=$(LINUX_DIR)/drivers/soc/fsl/dpaa2-console.ko
- AUTOLOAD=$(call AutoLoad,40,dpaa2-console)
-endef
-
-define KernelPackage/fsl-dpaa2-console/description
- Kernel modules for the NXP DPAA2 debug consoles
- (Management Complex and AIOP).
-endef
-
-$(eval $(call KernelPackage,fsl-dpaa2-console))
-
-define KernelPackage/marvell-mdio
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=Marvell Armada platform MDIO driver
- DEPENDS:=@(TARGET_armvirt_64) +kmod-libphy +kmod-of-mdio +kmod-acpi-mdio
- KCONFIG:=CONFIG_MVMDIO
- FILES=$(LINUX_DIR)/drivers/net/ethernet/marvell/mvmdio.ko
- AUTOLOAD=$(call AutoLoad,30,marvell-mdio)
-endef
-
-$(eval $(call KernelPackage,marvell-mdio))
-
-define KernelPackage/phy-marvell-10g
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=Marvell Alaska 10G PHY driver
- DEPENDS:=@(TARGET_armvirt_64) +kmod-libphy
- KCONFIG:=CONFIG_MARVELL_10G_PHY
- FILES=$(LINUX_DIR)/drivers/net/phy/marvell10g.ko
- AUTOLOAD=$(call AutoLoad,35,marvell10g)
-endef
-
-$(eval $(call KernelPackage,phy-marvell-10g))
-
-define KernelPackage/mvneta
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=Marvell Armada 370/38x/XP/37xx network driver
- DEPENDS:=@(TARGET_armvirt_64) +kmod-marvell-mdio +kmod-phylink
- KCONFIG:=CONFIG_MVNETA
- FILES:=$(LINUX_DIR)/drivers/net/ethernet/marvell/mvneta.ko
- AUTOLOAD=$(call AutoLoad,40,mvneta)
-endef
-
-$(eval $(call KernelPackage,mvneta))
-
-define KernelPackage/mvpp2
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=Marvell Armada 375/7K/8K network driver
- DEPENDS:=@(TARGET_armvirt_64) +kmod-marvell-mdio +kmod-phylink
- KCONFIG:=CONFIG_MVPP2 \
- CONFIG_MVPP2_PTP=n
- FILES=$(LINUX_DIR)/drivers/net/ethernet/marvell/mvpp2/mvpp2.ko
- AUTOLOAD=$(call AutoLoad,40,mvpp2)
-endef
-
-$(eval $(call KernelPackage,mvpp2))
-
-define KernelPackage/imx2-wdt
- SUBMENU:=$(OTHER_MENU)
- TITLE:=NXP (Freescale) i.MX2+ and Layerscape watchdog driver
- KCONFIG:=CONFIG_IMX2_WDT
- FILES=$(LINUX_DIR)/drivers/watchdog/imx2_wdt.ko
- AUTOLOAD=$(call AutoLoad,60,imx2_wdt)
-endef
-
-$(eval $(call KernelPackage,imx2-wdt))
-
-define KernelPackage/imx7-ulp-wdt
- SUBMENU:=$(OTHER_MENU)
- TITLE:=NXP (Freescale) i.MX7ULP and later watchdog
- KCONFIG:=CONFIG_IMX7ULP_WDT
- FILES=$(LINUX_DIR)/drivers/watchdog/imx7ulp_wdt.ko
- AUTOLOAD=$(call AutoLoad,60,imx7ulp_wdt)
-endef
-
-$(eval $(call KernelPackage,imx7-ulp-wdt))
-
-define KernelPackage/stmmac-core
- SUBMENU=$(NETWORK_DEVICES_MENU)
- TITLE:=Synopsis Ethernet Controller core (NXP,STMMicro,others)
- DEPENDS:=@(TARGET_armvirt_64) +kmod-phylink +kmod-pcs-xpcs +kmod-ptp
- KCONFIG:=CONFIG_STMMAC_ETH \
- CONFIG_STMMAC_SELFTESTS=n \
- CONFIG_STMMAC_PLATFORM \
- CONFIG_CONFIG_DWMAC_DWC_QOS_ETH=n \
- CONFIG_DWMAC_GENERIC
- FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/stmmac.ko \
- $(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/stmmac-platform.ko \
- $(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.ko
- AUTOLOAD=$(call AutoLoad,40,stmmac stmmac-platform dwmac-generic)
-endef
-
-$(eval $(call KernelPackage,stmmac-core))
-
-define KernelPackage/dwmac-imx
- SUBMENU=$(NETWORK_DEVICES_MENU)
- TITLE:=NXP i.MX8 Ethernet controller
- DEPENDS:=+kmod-stmmac-core
- KCONFIG:=CONFIG_DWMAC_IMX8
- FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.ko
- AUTOLOAD=$(call AutoLoad,45,dwmac-imx)
-endef
-
-$(eval $(call KernelPackage,dwmac-imx))
-
-define KernelPackage/dwmac-sun8i
- SUBMENU=$(NETWORK_DEVICES_MENU)
- TITLE:=Allwinner H3/A83T/A64 (sun8i) Ethernet
- DEPENDS:=+kmod-stmmac-core +kmod-mdio-bus-mux
- KCONFIG:=CONFIG_DWMAC_SUN8I
- FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.ko
- AUTOLOAD=$(call AutoLoad,45,dwmac-sun8i)
-endef
-
-$(eval $(call KernelPackage,dwmac-sun8i))
-
-define KernelPackage/dwmac-rockchip
- SUBMENU=$(NETWORK_DEVICES_MENU)
- TITLE:=Rockchip RK3328/RK3399/RK3568 Ethernet
- DEPENDS:=+kmod-stmmac-core +kmod-mdio-bus-mux
- KCONFIG:=CONFIG_DWMAC_ROCKCHIP
- FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.ko
- AUTOLOAD=$(call AutoLoad,45,dwmac-rk)
-endef
-
-$(eval $(call KernelPackage,dwmac-rockchip))
-
-define KernelPackage/thunderx-net
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=Marvell (Cavium) ThunderX/2 network drivers
- DEPENDS:=@(TARGET_armvirt_64) +kmod-phylink
- KCONFIG:=CONFIG_NET_VENDOR_CAVIUM \
- CONFIG_THUNDER_NIC_PF \
- CONFIG_THUNDER_NIC_VF \
- CONFIG_THUNDER_NIC_BGX \
- CONFIG_THUNDER_NIC_RGX
- FILES=$(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/nicvf.ko \
- $(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/nicpf.ko \
- $(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/thunder_xcv.ko \
- $(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/thunder_bgx.ko
- AUTOLOAD=$(call AutoLoad,40,nicpf nicvf thunder_xcv thunder_bgx)
-endef
-
-$(eval $(call KernelPackage,thunderx-net))
-
-define KernelPackage/wdt-sp805
- SUBMENU:=$(OTHER_MENU)
- TITLE:=ARM SP805 Watchdog
- KCONFIG:=CONFIG_ARM_SP805_WATCHDOG
- FILES=$(LINUX_DIR)/drivers/watchdog/sp805_wdt.ko
- AUTOLOAD=$(call AutoLoad,50,sp805_wdt)
-endef
-
-define KernelPackage/wdt-sp805/description
- Support for the ARM SP805 wathchdog module.
- This is present in the NXP Layerscape family,
- HiSilicon HI3660 among others.
-endef
-
-$(eval $(call KernelPackage,wdt-sp805))
-
+++ /dev/null
-From b77c0ecdc7915e5c5c515da1aa6cfaf6f4eb8351 Mon Sep 17 00:00:00 2001
-From: Mathew McBride <matt@traverse.com.au>
-Date: Wed, 28 Sep 2022 16:39:31 +1000
-Subject: [PATCH] arm: disable code size reduction measures
- (gc-sections,-f*-sections)
-
-This interferes with the EFI boot stub on armv7l.
-
-Signed-off-by: Mathew McBride <matt@traverse.com.au>
----
- arch/arm/Kconfig | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -117,7 +117,6 @@ config ARM
- select HAVE_UID16
- select HAVE_VIRT_CPU_ACCOUNTING_GEN
- select IRQ_FORCED_THREADING
-- select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
- select MODULES_USE_ELF_REL
- select NEED_DMA_MAP_STATE
- select OF_EARLY_FLATTREE if OF
+++ /dev/null
-From d5af37ae22f0364be9ded773d737dd6e5b207b10 Mon Sep 17 00:00:00 2001
-From: Ioana Ciornei <ioana.ciornei@nxp.com>
-Date: Thu, 21 Nov 2019 21:15:25 +0200
-Subject: [PATCH 3/4] dpaa2-eth: do not hold rtnl_lock on phylink_create() or
- _destroy()
-
-The rtnl_lock should not be held when calling phylink_create() or
-phylink_destroy() since it leads to the deadlock listed below:
-
-[ 18.656576] rtnl_lock+0x18/0x20
-[ 18.659798] sfp_bus_add_upstream+0x28/0x90
-[ 18.663974] phylink_create+0x2cc/0x828
-[ 18.667803] dpaa2_mac_connect+0x14c/0x2a8
-[ 18.671890] dpaa2_eth_connect_mac+0x94/0xd8
-
-Fix this by moving the _lock() and _unlock() calls just outside of
-phylink_of_phy_connect() and phylink_disconnect_phy().
-
-Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink")
-Reported-by: Russell King <linux@armlinux.org.uk>
-Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 4 ----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 4 ++++
- 2 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -4217,12 +4217,10 @@ static irqreturn_t dpni_irq0_handler_thr
- dpaa2_eth_set_mac_addr(netdev_priv(net_dev));
- dpaa2_eth_update_tx_fqids(priv);
-
-- rtnl_lock();
- if (dpaa2_eth_has_mac(priv))
- dpaa2_eth_disconnect_mac(priv);
- else
- dpaa2_eth_connect_mac(priv);
-- rtnl_unlock();
- }
-
- return IRQ_HANDLED;
-@@ -4516,9 +4514,7 @@ static int dpaa2_eth_remove(struct fsl_m
- #endif
-
- unregister_netdev(net_dev);
-- rtnl_lock();
- dpaa2_eth_disconnect_mac(priv);
-- rtnl_unlock();
-
- dpaa2_eth_dl_port_del(priv);
- dpaa2_eth_dl_traps_unregister(priv);
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-@@ -351,7 +351,9 @@ int dpaa2_mac_connect(struct dpaa2_mac *
- if (mac->pcs)
- phylink_set_pcs(mac->phylink, &mac->pcs->pcs);
-
-+ rtnl_lock();
- err = phylink_fwnode_phy_connect(mac->phylink, dpmac_node, 0);
-+ rtnl_unlock();
- if (err) {
- netdev_err(net_dev, "phylink_fwnode_phy_connect() = %d\n", err);
- goto err_phylink_destroy;
-@@ -372,7 +374,9 @@ void dpaa2_mac_disconnect(struct dpaa2_m
- if (!mac->phylink)
- return;
-
-+ rtnl_lock();
- phylink_disconnect_phy(mac->phylink);
-+ rtnl_unlock();
- phylink_destroy(mac->phylink);
- dpaa2_pcs_destroy(mac);
- }
+++ /dev/null
-From c314138bd045e050432158ab021160de3ba51c5e Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 30 Jan 2020 22:42:38 +0000
-Subject: [PATCH 2/4] net: dpaa2-mac: add support for more 10G modes
-
-Phylink documentation says:
- * Note that the PHY may be able to transform from one connection
- * technology to another, so, eg, don't clear 1000BaseX just
- * because the MAC is unable to BaseX mode. This is more about
- * clearing unsupported speeds and duplex settings. The port modes
- * should not be cleared; phylink_set_port_modes() will help with this.
-
-So add the missing 10G modes.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-@@ -140,6 +140,12 @@ static void dpaa2_mac_validate(struct ph
- case PHY_INTERFACE_MODE_10GBASER:
- case PHY_INTERFACE_MODE_USXGMII:
- phylink_set(mask, 10000baseT_Full);
-+ phylink_set(mask, 10000baseKR_Full);
-+ phylink_set(mask, 10000baseCR_Full);
-+ phylink_set(mask, 10000baseSR_Full);
-+ phylink_set(mask, 10000baseLR_Full);
-+ phylink_set(mask, 10000baseLRM_Full);
-+ phylink_set(mask, 10000baseER_Full);
- if (state->interface == PHY_INTERFACE_MODE_10GBASER)
- break;
- phylink_set(mask, 5000baseT_Full);
projects / openwrt / staging / pepe2k.git / commitdiff