ath79: add support for the TP-LINK WBS510 V2

This adds support for a popular low-cost 5GHz N based AP

Specifications:
 - SoC: Atheros AR9344
 - RAM: 64MB
 - Storage: 8 MB SPI NOR
 - Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power
 - Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>

diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c
index 3ec1fb6ce7604c9157b8e7815cddb2b33db64093..89955725d07cc88fccb5a3529a6d3e7292bdf2ba 100644 (file)
--- a/src/tplink-safeloader.c
+++ b/src/tplink-safeloader.c
@@ -570,6 +570,39 @@ static struct device_info boards[] = {
                .last_sysupgrade_partition = "support-list",
        },
 
+       {
+               .id     = "WBS510V2",
+               .vendor = "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
+               .support_list =
+                       "SupportList:\r\n"
+                       "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
+                       "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
+                       "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
+                       "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
+               .support_trail = '\xff',
+               .soft_ver = NULL,
+
+               .partitions = {
+                       {"fs-uboot", 0x00000, 0x20000},
+                       {"partition-table", 0x20000, 0x02000},
+                       {"default-mac", 0x30000, 0x00020},
+                       {"product-info", 0x31100, 0x00100},
+                       {"signature", 0x32000, 0x00400},
+                       {"os-image", 0x40000, 0x200000},
+                       {"file-system", 0x240000, 0x570000},
+                       {"soft-version", 0x7b0000, 0x00100},
+                       {"support-list", 0x7b1000, 0x00400},
+                       {"user-config", 0x7c0000, 0x10000},
+                       {"default-config", 0x7d0000, 0x10000},
+                       {"log", 0x7e0000, 0x10000},
+                       {"radio", 0x7f0000, 0x10000},
+                       {NULL, 0, 0}
+               },
+
+               .first_sysupgrade_partition = "os-image",
+               .last_sysupgrade_partition = "support-list",
+       },
+
        /** Firmware layout for the C2600 */
        {
                .id = "C2600",