ipq807x: add initial support for prpl Foundation Haze board
authorPetr Štetiar <ynezz@true.cz>
Mon, 5 Jun 2023 10:13:04 +0000 (12:13 +0200)
committerPetr Štetiar <ynezz@true.cz>
Mon, 12 Jun 2023 20:10:29 +0000 (22:10 +0200)
Haze is prpl Foundation's reference board (WNC LVRP).

Board info:

 - IPQ8072A SoC
 - 2 GiB RAM
 - 4 GiB eMMC
 - 8MiB SPI NOR (MX25U6435F)

 - 3x 1GigE ports (QCA8075)
 - 1x 10GigE port (AQR113C)
 - 1x SFP cage

 - WiFi 6GHz 160MHz (QCN9074)
 - WiFi 5GHz 80+80MHz (QCN5054)
 - WiFi 2.4G (QCN5024)

 - ARM Standard 20-pin 2.54mm/0.1" JTAG (1V8 !!!)
 - Bluetooth v5.0 + EDR with integrated Class 1 PA (CYW20704)
 - 1x M.2 B-key socket with PCIe 3.0
 - 1x USB 3.0 port
 - UART marked J6 is 4-pin 2.54mm/0.1" connector 3V3(arrow),RX,TX,GND (115200 8N1)
 - Reset and WPS buttons

Flashing instructions:

 1. From U-Boot boot OpenWrt using initramfs image:

    IPQ807x# tftpboot openwrt-ipq807x-generic-prpl_haze-initramfs-uImage.itb && bootm

 2. In OpenWrt running from initramfs execute sysupgrade:

    root@OpenWrt:/# sysupgrade -n /tmp/openwrt-ipq807x-generic-prpl_haze-squashfs-sysupgrade.bin

Work in progress/known issues:

 * SFP feature not implemented/tested
 * M.2 feature not implemented/tested
 * Bluetooth feature not implemented/tested
 * 6GHz wireless should be working, but not tested
 * MAC address assigments for LAN interfaces

Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 2e910039dd7170fd28641e7686c376dba6f0d8a5)

package/boot/uboot-envtools/files/ipq807x
target/linux/ipq807x/base-files/etc/board.d/02_network
target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
target/linux/ipq807x/base-files/lib/upgrade/platform.sh
target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts [new file with mode: 0644]
target/linux/ipq807x/image/generic.mk

index ca331f10322fb63160483d1cdf8aaee2ebdb9be1..2064bfc6f2a4044b02e0ce96f89b178ffda140fe 100644 (file)
@@ -35,6 +35,11 @@ xiaomi,ax9000)
        [ -n "$idx2" ] && \
                ubootenv_add_uci_sys_config "/dev/mtd$idx2" "0x0" "0x10000" "0x20000"
        ;;
+prpl,haze)
+       mmcpart="$(find_mmc_part 0:APPSBLENV)"
+       [ -n "$mmcpart" ] && \
+               ubootenv_add_uci_config "$mmcpart" "0x0" "0x40000" "0x400" "0x100"
+       ;;
 qnap,301w)
        idx="$(find_mtd_index 0:appsblenv)"
        [ -n "$idx" ] && \
index 1da5c3ae1e203c720c17088715c6122cc32b1e82..21364337fbbf4235b607367439e27ffcf2237da0 100644 (file)
@@ -25,6 +25,9 @@ ipq807x_setup_interfaces()
        netgear,wax218)
                ucidef_set_interface_lan "lan" "dhcp"
                ;;
+       prpl,haze)
+               ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+               ;;
        qnap,301w)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g-2" "10g-1"
                ;;
index b3564fe9c6d128a4cebd664eb6161490e3233af2..13cb07477ef6d7d976a791015e16ef50c0aef690 100644 (file)
@@ -21,10 +21,17 @@ case "$FIRMWARE" in
        zyxel,nbg7815)
                caldata_extract "0:art" 0x1000 0x20000
                ;;
+       prpl,haze)
+                caldata_extract_mmc "0:ART" 0x1000 0x20000
+               ;;
        esac
        ;;
-"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin")
+"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin"|\
+"ath11k/QCN9074/hw1.0/cal-pci-0001:01:00.0.bin")
        case "$board" in
+       prpl,haze)
+                caldata_extract_mmc "0:ART" 0x26800 0x20000
+               ;;
        xiaomi,ax9000)
                caldata_extract "0:art" 0x26800 0x20000
                ;;
index 11717d6324dfb09b50427ba9b0083eb30db924df..346cc390f3124e52fbbb349071b5acc2f2596d78 100644 (file)
@@ -70,6 +70,7 @@ platform_do_upgrade() {
        netgear,wax218)
                nand_do_upgrade "$1"
                ;;
+       prpl,haze|\
        qnap,301w)
                kernelname="0:HLOS"
                rootfsname="rootfs"
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts
new file mode 100644 (file)
index 0000000..8a5200b
--- /dev/null
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+#include "ipq8074-ess.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+       model = "prpl Foundation Haze";
+       compatible = "prpl,haze", "qcom,ipq8074";
+
+       aliases {
+               serial0 = &blsp1_uart5;
+               /* Aliases are required by U-Boot to patch MAC addresses */
+               ethernet0 = &dp6_syn;
+               ethernet1 = &dp4;
+               ethernet2 = &dp3;
+               ethernet3 = &dp2;
+               label-mac-device = &dp6_syn;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys";
+               pinctrl-0 = <&button_pins>;
+               pinctrl-names = "default";
+
+               wps-button {
+                       label = "wps";
+                       gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+
+               reset-button {
+                       label = "reset";
+                       gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+};
+
+&tlmm {
+       mdio_pins: mdio-state {
+               mdc-pins {
+                       pins = "gpio68";
+                       function = "mdc";
+                       drive-strength = <8>;
+                       bias-pull-up;
+               };
+
+               mdio-pins {
+                       pins = "gpio69";
+                       function = "mdio";
+                       drive-strength = <8>;
+                       bias-pull-up;
+               };
+       };
+
+       button_pins: button-state {
+               wps-pins {
+                       pins = "gpio42";
+                       function = "gpio";
+                       drive-strength = <8>;
+                       bias-pull-up;
+               };
+
+               rst-pins {
+                       pins = "gpio44";
+                       function = "gpio";
+                       drive-strength = <8>;
+                       bias-pull-up;
+               };
+       };
+};
+
+&blsp1_uart5 {
+       status = "okay";
+};
+
+&prng {
+       status = "okay";
+};
+
+&ssphy_0 {
+       status = "okay";
+};
+
+&qusb_phy_0 {
+       status = "okay";
+};
+
+&ssphy_1 {
+       status = "okay";
+};
+
+&qusb_phy_1 {
+       status = "okay";
+};
+
+&usb_0 {
+       status = "okay";
+};
+
+&usb_1 {
+       status = "okay";
+};
+
+&cryptobam {
+       status = "okay";
+};
+
+&crypto {
+       status = "okay";
+};
+
+&qpic_bam {
+       status = "okay";
+};
+
+&blsp1_spi1 { /* BLSP1 QUP1 */
+       pinctrl-0 = <&spi_0_pins>;
+       pinctrl-names = "default";
+       cs-gpios = <0>;
+       status = "okay";
+
+       flash@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               reg = <0>;
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <50000000>;
+
+               partitions {
+                       compatible = "qcom,smem-part";
+               };
+       };
+};
+
+&mdio {
+       status = "okay";
+
+       pinctrl-0 = <&mdio_pins>;
+       pinctrl-names = "default";
+       reset-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
+
+       qca8075_1: ethernet-phy@0 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <0>;
+       };
+
+       qca8075_2: ethernet-phy@1 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <1>;
+       };
+
+       qca8075_3: ethernet-phy@2 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <2>;
+       };
+
+       qca8075_4: ethernet-phy@3 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <3>;
+       };
+
+       aqr113c: ethernet-phy@5 {
+               compatible ="ethernet-phy-ieee802.3-c45";
+               reg = <8>;
+               reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
+       };
+};
+
+&sdhc_1 {
+       status = "okay";
+
+       vqmmc-supply = <&l11>;
+};
+
+&switch {
+       status = "okay";
+
+       switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+       switch_lan_bmp = <0x1e>; /* lan port bitmap */
+       switch_wan_bmp = <0x60>; /* wan port bitmap */
+       switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+       switch_mac_mode1 = <0xe>; /* mac mode for uniphy instance1*/
+       switch_mac_mode2 = <0xd>; /* mac mode for uniphy instance2*/
+       bm_tick_mode = <0>; /* bm tick mode */
+       tm_tick_mode = <0>; /* tm tick mode */
+
+       qcom,port_phyinfo {
+               port@0 {
+                       port_id = <1>;
+                       phy_address = <0>;
+               };
+               port@1 {
+                       port_id = <2>;
+                       phy_address = <1>;
+               };
+               port@2 {
+                       port_id = <3>;
+                       phy_address = <2>;
+               };
+               port@3 {
+                       port_id = <4>;
+                       phy_address = <3>;
+               };
+               port@4 {
+                       port_id = <6>;
+                       phy_address = <8>;
+                       compatible = "ethernet-phy-ieee802.3-c45";
+                       ethernet-phy-ieee802.3-c45;
+               };
+       };
+};
+
+&edma {
+       status = "okay";
+};
+
+/* Dummy LAN port */
+&dp1 {
+       status = "disabled";
+       phy-handle = <&qca8075_1>;
+       label = "lan4";
+};
+
+&dp2 {
+       status = "okay";
+       phy-handle = <&qca8075_2>;
+       label = "lan3";
+};
+
+&dp3 {
+       status = "okay";
+       phy-handle = <&qca8075_3>;
+       label = "lan2";
+};
+
+&dp4 {
+       status = "okay";
+       phy-handle = <&qca8075_4>;
+       label = "lan1";
+};
+
+&dp6_syn {
+       status = "okay";
+       qcom,mactype = <1>;
+       phy-handle = <&aqr113c>;
+       label = "wan";
+};
+
+&pcie_qmp0 {
+       status = "okay";
+};
+
+&pcie0 {
+       status = "okay";
+
+       perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;
+
+       bridge@0,0 {
+               reg = <0x00020000 0 0 0 0>;
+               #address-cells = <3>;
+               #size-cells = <2>;
+               ranges;
+       };
+};
+
+&pcie_qmp1 {
+       status = "okay";
+};
+
+&pcie1 {
+       status = "okay";
+
+       perst-gpio = <&tlmm 61 GPIO_ACTIVE_LOW>;
+
+       bridge@1,0 {
+               reg = <0x00010000 0 0 0 0>;
+               #address-cells = <3>;
+               #size-cells = <2>;
+               ranges;
+
+               wifi@1,0 {
+                       status = "okay";
+
+                       /* ath11k has no DT compatible for PCI cards */
+                       compatible = "pci17cb,1104";
+                       reg = <0x00010000 0 0 0 0>;
+
+                       qcom,ath11k-calibration-variant = "prpl-Haze";
+               };
+       };
+};
+
+&wifi {
+       status = "okay";
+
+       qcom,ath11k-calibration-variant = "prpl-Haze";
+};
index d57099e5b4e904ba94516d2e54c8289952d95228..6eca67d11c681eb6be9db04d25e9f67514c9ce96 100644 (file)
@@ -95,6 +95,17 @@ define Device/netgear_wax218
 endef
 TARGET_DEVICES += netgear_wax218
 
+define Device/prpl_haze
+       $(call Device/FitImage)
+       $(call Device/EmmcImage)
+       DEVICE_VENDOR := prpl Foundation
+       DEVICE_MODEL := Haze
+       DEVICE_DTS_CONFIG := config@hk09
+       SOC := ipq8072
+       DEVICE_PACKAGES += ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci
+endef
+TARGET_DEVICES += prpl_haze
+
 define Device/qnap_301w
        $(call Device/FitImage)
        $(call Device/EmmcImage)