config usteer
+ # The network interface for inter-AP communication
option 'network' 'lan'
+
+ # Log messages to syslog (0/1)
option 'syslog' '1'
+
+ # Minimum level of logged messages
+ # 0 = fatal
+ # 1 = info
+ # 2 = verbose
+ # 3 = some debug messages
+ # 4 = network packet information
+ # 5 = all debug messages
option 'debug_level' '2'
+
+ # Maximum amount of time (ms) a station may be blocked due to policy decisions
+ #option sta_block_timeout 30000
+
+ # Maximum amount of time (ms) a local unconnected station is tracked
+ #option local_sta_timeout 120000
+
+ # Local station information update interval (ms)
+ #option local_sta_update 1000
+
+ # Maximum number of consecutive times a station may be blocked by policy
+ #option max_retry_band 5
+
+ # Maximum idle time of a station entry (ms) to be considered for policy decisions
+ #option seen_policy_timeout 30000
+
+ # Minimum number of stations delta between APs before load balancing policy is active
+ #option load_balancing_threshold 5
+
+ # Minimum number of stations delta between bands before band steering policy is active
+ #option band_steering_threshold 5
+
+ # Interval (ms) between sending state updates to other APs
+ #option remote_update_interval 1000
+
+ # Allow rejecting assoc requests for steering purposes (0/1)
+ #option assoc_steering 0
+
+ # Minimum signal-to-noise ratio or signal level (dBm) to allow connections
+ #option min_connect_snr 0
+
+ # Minimum signal-to-noise ratio or signal level (dBm) to remain connected
+ #option min_snr 0
+
+ # Minimum signal-to-noise ratio or signal level (dBm) before attempting to trigger
+ # client scans for roaming
+ #option roam_scan_snr 0
+
+ # Maximum number of client roaming scan trigger attempts
+ #option roam_scan_tries 3
+
+ # Minimum time (ms) between client roaming scan trigger attempts
+ #option roam_scan_interval 10000
+
+ # Minimum signal-to-noise ratio or signal level (dBm) before attempting to trigger
+ # forced client roaming
+ #option roam_trigger_snr 0
+
+ # Minimum time (ms) between client roaming trigger attempts
+ #option roam_trigger_interval 60000
+
+ # Timeout (in 100ms beacon intervals) for client roam requests
+ #option roam_kick_delay 100
+
+ # Minimum signal strength difference until AP steering policy is active
+ #option signal_diff_threshold 0
+
+ # Initial delay (ms) before responding to probe requests (to allow other APs to see packets as well)
+ #option initial_connect_delay 0
+
+ # Enable kicking client on excessive channel load (0/1)
+ #option load_kick_enabled 0
+
+ # Minimum channel load (%) before kicking clients
+ #option load_kick_threshold 75
+
+ # Minimum amount of time (ms) that channel load is above threshold before starting to kick clients
+ #option load_kick_delay 10000
+
+ # Minimum number of connected clients before kicking based on channel load
+ #option load_kick_min_clients 10
+
+ # Reason code on client kick based on channel load (default: WLAN_REASON_DISASSOC_AP_BUSY)
+ #option load_kick_reason_code 5
+
+ # Script to run after bringing up a node
+ #option node_up_script ''
+
+ # Message types to include in log
+ # Available types:
+ # - probe_req_accept
+ # - probe_req_deny
+ # - auth_req_accept
+ # - auth_req_deny
+ # - assoc_req_accept
+ # - assoc_req_deny
+ # - load_kick_trigger
+ # - load_kick_reset
+ # - load_kick_min_clients
+ # - load_kick_no_client
+ # - load_kick_client
+ # - signal_kick
+ #option event_log_types ''