-LINUX_VERSION-5.10 = .194
-LINUX_KERNEL_HASH-5.10.194 = 240d5e47bb378c6813ecd07704fb887651ea7617159d2771071fd70bf33cd995
+LINUX_VERSION-5.10 = .196
+LINUX_KERNEL_HASH-5.10.196 = 71ec2e3af082bcd7c4aac4b8ecdbc2e47695befe4984e3e5567791a605a96fc0
--- a/sound/soc/atmel/atmel-i2s.c
+++ b/sound/soc/atmel/atmel-i2s.c
-@@ -581,8 +581,8 @@ static int atmel_i2s_sama5d2_mck_init(st
+@@ -584,8 +584,8 @@ static int atmel_i2s_sama5d2_mck_init(st
err = PTR_ERR(muxclk);
if (err == -EPROBE_DEFER)
return -EPROBE_DEFER;
--- a/sound/soc/atmel/atmel-i2s.c
+++ b/sound/soc/atmel/atmel-i2s.c
-@@ -613,7 +613,7 @@ static int atmel_i2s_probe(struct platfo
+@@ -616,7 +616,7 @@ static int atmel_i2s_probe(struct platfo
struct regmap *regmap;
void __iomem *base;
int irq;
--- a/sound/soc/atmel/atmel-i2s.c
+++ b/sound/soc/atmel/atmel-i2s.c
-@@ -560,6 +560,7 @@ static struct snd_soc_dai_driver atmel_i
+@@ -563,6 +563,7 @@ static struct snd_soc_dai_driver atmel_i
},
.ops = &atmel_i2s_dai_ops,
.symmetric_rates = 1,
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
-@@ -3168,6 +3168,7 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -3169,6 +3169,7 @@ int spi_nor_scan(struct spi_nor *nor, co
struct device *dev = nor->dev;
struct mtd_info *mtd = &nor->mtd;
struct device_node *np = spi_nor_get_flash_node(nor);
int ret;
int i;
-@@ -3222,7 +3223,12 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -3223,7 +3224,12 @@ int spi_nor_scan(struct spi_nor *nor, co
if (ret)
return ret;
EXPORT_SYMBOL(xfrm_parse_spi);
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
-@@ -4134,14 +4134,16 @@ static bool tcp_parse_aligned_timestamp(
+@@ -4133,14 +4133,16 @@ static bool tcp_parse_aligned_timestamp(
{
const __be32 *ptr = (const __be32 *)(th + 1);
}
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
-@@ -5508,7 +5508,7 @@ static void port_event(struct usb_hub *h
+@@ -5564,7 +5564,7 @@ static void port_event(struct usb_hub *h
port_dev->over_current_count++;
port_over_current_notify(port_dev);
USB_PORT_FEAT_C_OVER_CURRENT);
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
-@@ -2135,6 +2135,85 @@ free_interfaces:
+@@ -2130,6 +2130,85 @@ free_interfaces:
if (cp->string == NULL &&
!(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
-@@ -652,6 +652,10 @@ config UNIPHIER_XDMAC
+@@ -654,6 +654,10 @@ config UNIPHIER_XDMAC
UniPhier platform. This DMA controller can transfer data from
memory to memory, memory to peripheral and peripheral to memory.
config SND_SOC_RT5631
tristate "Realtek ALC5631/RT5631 CODEC"
depends on I2C
-@@ -1349,6 +1364,9 @@ config SND_SOC_TFA9879
+@@ -1350,6 +1365,9 @@ config SND_SOC_TFA9879
tristate "NXP Semiconductors TFA9879 amplifier"
depends on I2C
config SND_SOC_TLV320AIC23
tristate
-@@ -1787,4 +1805,8 @@ config SND_SOC_TPA6130A2
+@@ -1788,4 +1806,8 @@ config SND_SOC_TPA6130A2
tristate "Texas Instruments TPA6130A2 headphone amplifier"
depends on I2C
static void iproc_rng200_cleanup(struct hwrng *rng)
{
struct iproc_rng200_dev *priv = to_rng_priv(rng);
-@@ -195,11 +261,17 @@ static int iproc_rng200_probe(struct pla
- return PTR_ERR(priv->base);
- }
+@@ -197,11 +263,17 @@ static int iproc_rng200_probe(struct pla
+
+ dev_set_drvdata(dev, priv);
- priv->rng.name = "iproc-rng200";
- priv->rng.read = iproc_rng200_read;
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
-@@ -1969,6 +1969,16 @@ reset:
+@@ -1973,6 +1973,16 @@ reset:
return ret;
}
* have been called previously. Use for set_configuration, set_interface,
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
-@@ -1265,6 +1265,21 @@ static void remove_intf_ep_devs(struct u
+@@ -1260,6 +1260,21 @@ static void remove_intf_ep_devs(struct u
intf->ep_devs_created = 0;
}
struct tally_counter {
__le64 tx_packets;
__le64 rx_packets;
-@@ -6627,7 +6604,7 @@ static int rtl_fw_init(struct r8152 *tp)
+@@ -6630,7 +6607,7 @@ static int rtl_fw_init(struct r8152 *tp)
return 0;
}
{
struct usb_device *udev = interface_to_usbdev(intf);
u32 ocp_data = 0;
-@@ -6685,12 +6662,13 @@ static u8 rtl_get_version(struct usb_int
+@@ -6688,12 +6665,13 @@ static u8 rtl_get_version(struct usb_int
return version;
}
if (test_bit(RTL8152_UNPLUG, &tp->flags))
return;
-@@ -6720,7 +6718,7 @@ static int rtl8152_probe(struct usb_inte
+@@ -6723,7 +6721,7 @@ static int rtl8152_probe(struct usb_inte
mutex_init(&tp->control);
INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
INIT_DELAYED_WORK(&tp->hw_phy_work, rtl_hw_phy_work_func_t);
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
-@@ -3446,59 +3446,76 @@ static void rtl_clear_bp(struct r8152 *t
+@@ -3449,59 +3449,76 @@ static void rtl_clear_bp(struct r8152 *t
ocp_write_word(tp, type, PLA_BP_BA, 0);
}
ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
-@@ -3983,7 +4000,7 @@ static void rtl8152_fw_mac_apply(struct
+@@ -3986,7 +4003,7 @@ static void rtl8152_fw_mac_apply(struct
dev_dbg(&tp->intf->dev, "successfully applied %s\n", mac->info);
}
{
struct rtl_fw *rtl_fw = &tp->rtl_fw;
const struct firmware *fw;
-@@ -4014,12 +4031,11 @@ static void rtl8152_apply_firmware(struc
+@@ -4017,12 +4034,11 @@ static void rtl8152_apply_firmware(struc
case RTL_FW_PHY_START:
key = (struct fw_phy_patch_key *)block;
key_addr = __le16_to_cpu(key->key_reg);
break;
case RTL_FW_PHY_NC:
rtl8152_fw_phy_nc_apply(tp, (struct fw_phy_nc *)block);
-@@ -4224,7 +4240,7 @@ static void rtl8152_disable(struct r8152
+@@ -4227,7 +4243,7 @@ static void rtl8152_disable(struct r8152
static void r8152b_hw_phy_cfg(struct r8152 *tp)
{
rtl_eee_enable(tp, tp->eee_en);
r8152_aldps_en(tp, true);
r8152b_enable_fc(tp);
-@@ -4506,7 +4522,7 @@ static void r8153_hw_phy_cfg(struct r815
+@@ -4509,7 +4525,7 @@ static void r8153_hw_phy_cfg(struct r815
/* disable EEE before updating the PHY parameters */
rtl_eee_enable(tp, false);
if (tp->version == RTL_VER_03) {
data = ocp_reg_read(tp, OCP_EEE_CFG);
-@@ -4580,7 +4596,7 @@ static void r8153b_hw_phy_cfg(struct r81
+@@ -4583,7 +4599,7 @@ static void r8153b_hw_phy_cfg(struct r81
/* disable EEE before updating the PHY parameters */
rtl_eee_enable(tp, false);
r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
-@@ -4621,7 +4637,7 @@ static void r8153b_hw_phy_cfg(struct r81
+@@ -4624,7 +4640,7 @@ static void r8153b_hw_phy_cfg(struct r81
ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
/* Advnace EEE */
data = ocp_reg_read(tp, OCP_POWER_CFG);
data |= EEE_CLKDIV_EN;
ocp_reg_write(tp, OCP_POWER_CFG, data);
-@@ -4638,7 +4654,7 @@ static void r8153b_hw_phy_cfg(struct r81
+@@ -4641,7 +4657,7 @@ static void r8153b_hw_phy_cfg(struct r81
ocp_reg_write(tp, OCP_SYSCLK_CFG, clk_div_expo(5));
tp->ups_info._250m_ckdiv = true;
static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
{
struct r8152 *tp = netdev_priv(netdev);
-@@ -3185,8 +3189,6 @@ static void r8153b_ups_en(struct r8152 *
+@@ -3188,8 +3192,6 @@ static void r8153b_ups_en(struct r8152 *
ocp_data |= BIT(0);
ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
} else {
ocp_data &= ~(UPS_EN | USP_PREWAKE);
ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
-@@ -3194,31 +3196,20 @@ static void r8153b_ups_en(struct r8152 *
+@@ -3197,31 +3199,20 @@ static void r8153b_ups_en(struct r8152 *
ocp_data &= ~BIT(0);
ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
}
}
}
-@@ -4590,13 +4581,37 @@ static void r8153b_hw_phy_cfg(struct r81
+@@ -4593,13 +4584,37 @@ static void r8153b_hw_phy_cfg(struct r81
u32 ocp_data;
u16 data;
r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
-@@ -5545,9 +5560,6 @@ static void r8153b_init(struct r8152 *tp
+@@ -5548,9 +5563,6 @@ static void r8153b_init(struct r8152 *tp
/* MSC timer = 0xfff * 8ms = 32760 ms */
ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
-@@ -3338,7 +3338,7 @@ static void rtl8153b_runtime_enable(stru
+@@ -3341,7 +3341,7 @@ static void rtl8153b_runtime_enable(stru
r8153b_ups_en(tp, false);
r8153_queue_wake(tp, false);
rtl_runtime_suspend_enable(tp, false);
r8153b_u1u2en(tp, true);
}
}
-@@ -5031,7 +5031,7 @@ static void rtl8153b_up(struct r8152 *tp
+@@ -5034,7 +5034,7 @@ static void rtl8153b_up(struct r8152 *tp
r8153_aldps_en(tp, true);
r8153b_u1u2en(tp, true);
}
-@@ -5573,8 +5573,9 @@ static void r8153b_init(struct r8152 *tp
+@@ -5576,8 +5576,9 @@ static void r8153b_init(struct r8152 *tp
ocp_data |= POLL_LINK_CHG;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
-@@ -5760,6 +5760,9 @@ static int rtl8152_runtime_suspend(struc
+@@ -5763,6 +5763,9 @@ static int rtl8152_runtime_suspend(struc
struct net_device *netdev = tp->netdev;
int ret = 0;
set_bit(SELECTIVE_SUSPEND, &tp->flags);
smp_mb__after_atomic();
-@@ -6159,6 +6162,11 @@ rtl_ethtool_get_eee(struct net_device *n
+@@ -6162,6 +6165,11 @@ rtl_ethtool_get_eee(struct net_device *n
struct r8152 *tp = netdev_priv(net);
int ret;
ret = usb_autopm_get_interface(tp->intf);
if (ret < 0)
goto out;
-@@ -6181,6 +6189,11 @@ rtl_ethtool_set_eee(struct net_device *n
+@@ -6184,6 +6192,11 @@ rtl_ethtool_set_eee(struct net_device *n
struct r8152 *tp = netdev_priv(net);
int ret;
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
-@@ -6596,7 +6596,7 @@ static int rtl_ops_init(struct r8152 *tp
+@@ -6599,7 +6599,7 @@ static int rtl_ops_init(struct r8152 *tp
default:
ret = -ENODEV;
break;
}
-@@ -6853,7 +6853,7 @@ static int rtl8152_probe(struct usb_inte
+@@ -6856,7 +6856,7 @@ static int rtl8152_probe(struct usb_inte
ret = register_netdev(netdev);
if (ret != 0) {
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
-@@ -2635,21 +2635,24 @@ static inline u8 rtl8152_get_speed(struc
+@@ -2638,21 +2638,24 @@ static inline u8 rtl8152_get_speed(struc
return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
}
}
static void rxdy_gated_en(struct r8152 *tp, bool enable)
-@@ -3130,10 +3133,22 @@ static void r8153b_ups_flags(struct r815
+@@ -3133,10 +3136,22 @@ static void r8153b_ups_flags(struct r815
ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
}
if (enable) {
sram_write(tp, 0x8045, 0); /* 10M abiq&ldvbias */
sram_write(tp, 0x804d, 0x1222); /* 100M short abiq&ldvbias */
-@@ -3144,11 +3159,7 @@ static void r8153b_green_en(struct r8152
+@@ -3147,11 +3162,7 @@ static void r8153b_green_en(struct r8152
sram_write(tp, 0x805d, 0x2444); /* 1000M short abiq&ldvbias */
}
/* PLA_MTPS */
#define MTPS_JUMBO (12 * 1024 / 64)
-@@ -2750,6 +2753,29 @@ static int rtl_stop_rx(struct r8152 *tp)
+@@ -2753,6 +2756,29 @@ static int rtl_stop_rx(struct r8152 *tp)
return 0;
}
static inline void r8153b_rx_agg_chg_indicate(struct r8152 *tp)
{
ocp_write_byte(tp, MCU_TYPE_USB, USB_UPT_RXDMA_OWN,
-@@ -2853,6 +2879,8 @@ static int rtl8153_enable(struct r8152 *
+@@ -2856,6 +2882,8 @@ static int rtl8153_enable(struct r8152 *
r8153_set_rx_early_timeout(tp);
r8153_set_rx_early_size(tp);
/**
* struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
* The layout of the firmware block is:
-@@ -3803,10 +3811,7 @@ static long rtl8152_check_firmware(struc
+@@ -3806,10 +3814,7 @@ static long rtl8152_check_firmware(struc
{
const struct firmware *fw = rtl_fw->fw;
struct fw_header *fw_hdr = (struct fw_header *)fw->data;
long ret = -EFAULT;
int i;
-@@ -3835,50 +3840,52 @@ static long rtl8152_check_firmware(struc
+@@ -3838,50 +3843,52 @@ static long rtl8152_check_firmware(struc
goto fail;
goto fw_end;
case RTL_FW_PLA:
dev_err(&tp->intf->dev,
"Check PHY_STOP fail\n");
goto fail;
-@@ -3889,28 +3896,28 @@ static long rtl8152_check_firmware(struc
+@@ -3892,28 +3899,28 @@ static long rtl8152_check_firmware(struc
"Invalid length for PHY_STOP\n");
goto fail;
}
break;
default:
-@@ -3924,7 +3931,7 @@ static long rtl8152_check_firmware(struc
+@@ -3927,7 +3934,7 @@ static long rtl8152_check_firmware(struc
}
fw_end:
static
int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
-@@ -2635,10 +2633,7 @@ static void rtl8152_nic_reset(struct r81
+@@ -2638,10 +2636,7 @@ static void rtl8152_nic_reset(struct r81
static void set_tx_qlen(struct r8152 *tp)
{
}
static inline u8 rtl8152_get_speed(struct r8152 *tp)
-@@ -4727,6 +4722,12 @@ static void r8153b_hw_phy_cfg(struct r81
+@@ -4730,6 +4725,12 @@ static void r8153b_hw_phy_cfg(struct r81
set_bit(PHY_RESET, &tp->flags);
}
static void r8153_first_init(struct r8152 *tp)
{
u32 ocp_data;
-@@ -4759,9 +4760,7 @@ static void r8153_first_init(struct r815
+@@ -4762,9 +4763,7 @@ static void r8153_first_init(struct r815
rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
ocp_data |= TCR0_AUTO_FIFO;
-@@ -4796,8 +4795,7 @@ static void r8153_enter_oob(struct r8152
+@@ -4799,8 +4798,7 @@ static void r8153_enter_oob(struct r8152
wait_oob_link_list_ready(tp);
switch (tp->version) {
case RTL_VER_03:
-@@ -6520,12 +6518,21 @@ static int rtl8152_change_mtu(struct net
+@@ -6523,12 +6521,21 @@ static int rtl8152_change_mtu(struct net
dev->mtu = new_mtu;
if (netif_running(dev)) {
}
mutex_unlock(&tp->control);
-@@ -6614,6 +6621,7 @@ static int rtl_ops_init(struct r8152 *tp
+@@ -6617,6 +6624,7 @@ static int rtl_ops_init(struct r8152 *tp
ops->in_nway = rtl8153_in_nway;
ops->hw_phy_cfg = r8153_hw_phy_cfg;
ops->autosuspend_en = rtl8153_runtime_enable;
if (tp->udev->speed < USB_SPEED_SUPER)
tp->rx_buf_sz = 16 * 1024;
else
-@@ -6635,6 +6643,7 @@ static int rtl_ops_init(struct r8152 *tp
+@@ -6638,6 +6646,7 @@ static int rtl_ops_init(struct r8152 *tp
ops->in_nway = rtl8153_in_nway;
ops->hw_phy_cfg = r8153b_hw_phy_cfg;
ops->autosuspend_en = rtl8153b_runtime_enable;
tp->rx_buf_sz = 32 * 1024;
tp->eee_en = true;
tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX;
-@@ -6855,7 +6864,7 @@ static int rtl8152_probe(struct usb_inte
+@@ -6858,7 +6867,7 @@ static int rtl8152_probe(struct usb_inte
netdev->max_mtu = ETH_DATA_LEN;
break;
default:
/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
* The RTL chips use a 64 element hash table based on the Ethernet CRC.
-@@ -2609,7 +2714,7 @@ static netdev_tx_t rtl8152_start_xmit(st
+@@ -2612,7 +2717,7 @@ static netdev_tx_t rtl8152_start_xmit(st
static void r8152b_reset_packet_filter(struct r8152 *tp)
{
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC);
ocp_data &= ~FMC_FCR_MCU_EN;
-@@ -2620,14 +2725,47 @@ static void r8152b_reset_packet_filter(s
+@@ -2623,14 +2728,47 @@ static void r8152b_reset_packet_filter(s
static void rtl8152_nic_reset(struct r8152 *tp)
{
}
}
-@@ -2636,9 +2774,9 @@ static void set_tx_qlen(struct r8152 *tp
+@@ -2639,9 +2777,9 @@ static void set_tx_qlen(struct r8152 *tp
tp->tx_qlen = agg_buf_sz / (mtu_to_size(tp->netdev->mtu) + sizeof(struct tx_desc));
}
}
static void rtl_eee_plus_en(struct r8152 *tp, bool enable)
-@@ -2798,6 +2936,7 @@ static int rtl_enable(struct r8152 *tp)
+@@ -2801,6 +2939,7 @@ static int rtl_enable(struct r8152 *tp)
switch (tp->version) {
case RTL_VER_08:
case RTL_VER_09:
r8153b_rx_agg_chg_indicate(tp);
break;
default:
-@@ -2835,6 +2974,7 @@ static void r8153_set_rx_early_timeout(s
+@@ -2838,6 +2977,7 @@ static void r8153_set_rx_early_timeout(s
case RTL_VER_08:
case RTL_VER_09:
/* The RTL8153B uses USB_RX_EXTRA_AGGR_TMR for rx timeout
* primarily. For USB_RX_EARLY_TIMEOUT, we fix it to 128ns.
*/
-@@ -2844,6 +2984,18 @@ static void r8153_set_rx_early_timeout(s
+@@ -2847,6 +2987,18 @@ static void r8153_set_rx_early_timeout(s
ocp_data);
break;
default:
break;
}
-@@ -2863,8 +3015,19 @@ static void r8153_set_rx_early_size(stru
+@@ -2866,8 +3018,19 @@ static void r8153_set_rx_early_size(stru
break;
case RTL_VER_08:
case RTL_VER_09:
break;
default:
WARN_ON_ONCE(1);
-@@ -2874,6 +3037,8 @@ static void r8153_set_rx_early_size(stru
+@@ -2877,6 +3040,8 @@ static void r8153_set_rx_early_size(stru
static int rtl8153_enable(struct r8152 *tp)
{
if (test_bit(RTL8152_UNPLUG, &tp->flags))
return -ENODEV;
-@@ -2884,15 +3049,18 @@ static int rtl8153_enable(struct r8152 *
+@@ -2887,15 +3052,18 @@ static int rtl8153_enable(struct r8152 *
rtl_set_ifg(tp, rtl8152_get_speed(tp));
}
return rtl_enable(tp);
-@@ -2957,12 +3125,40 @@ static void rtl_rx_vlan_en(struct r8152
+@@ -2960,12 +3128,40 @@ static void rtl_rx_vlan_en(struct r8152
{
u32 ocp_data;
}
static int rtl8152_set_features(struct net_device *dev,
-@@ -3055,6 +3251,40 @@ static void __rtl_set_wol(struct r8152 *
+@@ -3058,6 +3254,40 @@ static void __rtl_set_wol(struct r8152 *
device_set_wakeup_enable(&tp->udev->dev, false);
}
static void r8153_u1u2en(struct r8152 *tp, bool enable)
{
u8 u1u2[8];
-@@ -3114,6 +3344,9 @@ static void r8153b_ups_flags(struct r815
+@@ -3117,6 +3347,9 @@ static void r8153b_ups_flags(struct r815
if (tp->ups_info.eee_cmod_lv)
ups_flags |= UPS_FLAGS_EEE_CMOD_LV_EN;
if (tp->ups_info._10m_ckdiv)
ups_flags |= UPS_FLAGS_EN_10M_CKDIV;
-@@ -3164,6 +3397,88 @@ static void r8153b_ups_flags(struct r815
+@@ -3167,6 +3400,88 @@ static void r8153b_ups_flags(struct r815
ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
}
static void rtl_green_en(struct r8152 *tp, bool enable)
{
u16 data;
-@@ -3227,16 +3542,16 @@ static void r8153b_ups_en(struct r8152 *
+@@ -3230,16 +3545,16 @@ static void r8153b_ups_en(struct r8152 *
ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
int i;
-@@ -3256,6 +3571,95 @@ static void r8153b_ups_en(struct r8152 *
+@@ -3259,6 +3574,95 @@ static void r8153b_ups_en(struct r8152 *
}
}
static void r8153_power_cut_en(struct r8152 *tp, bool enable)
{
u32 ocp_data;
-@@ -3385,6 +3789,38 @@ static void rtl8153b_runtime_enable(stru
+@@ -3388,6 +3792,38 @@ static void rtl8153b_runtime_enable(stru
}
}
static void r8153_teredo_off(struct r8152 *tp)
{
u32 ocp_data;
-@@ -3405,14 +3841,19 @@ static void r8153_teredo_off(struct r815
+@@ -3408,14 +3844,19 @@ static void r8153_teredo_off(struct r815
case RTL_VER_08:
case RTL_VER_09:
}
ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE);
-@@ -3447,6 +3888,12 @@ static void rtl_clear_bp(struct r8152 *t
+@@ -3450,6 +3891,12 @@ static void rtl_clear_bp(struct r8152 *t
break;
case RTL_VER_08:
case RTL_VER_09:
default:
if (type == MCU_TYPE_USB) {
ocp_write_word(tp, MCU_TYPE_USB, USB_BP2_EN, 0);
-@@ -3656,6 +4103,11 @@ static bool rtl8152_is_fw_mac_ok(struct
+@@ -3659,6 +4106,11 @@ static bool rtl8152_is_fw_mac_ok(struct
case RTL_VER_06:
case RTL_VER_08:
case RTL_VER_09:
fw_reg = 0xf800;
bp_ba_addr = PLA_BP_BA;
bp_en_addr = PLA_BP_EN;
-@@ -3679,6 +4131,11 @@ static bool rtl8152_is_fw_mac_ok(struct
+@@ -3682,6 +4134,11 @@ static bool rtl8152_is_fw_mac_ok(struct
break;
case RTL_VER_08:
case RTL_VER_09:
fw_reg = 0xe600;
bp_ba_addr = USB_BP_BA;
bp_en_addr = USB_BP2_EN;
-@@ -4218,6 +4675,22 @@ static void r8153_eee_en(struct r8152 *t
+@@ -4221,6 +4678,22 @@ static void r8153_eee_en(struct r8152 *t
tp->ups_info.eee = enable;
}
static void rtl_eee_enable(struct r8152 *tp, bool enable)
{
switch (tp->version) {
-@@ -4239,6 +4712,7 @@ static void rtl_eee_enable(struct r8152
+@@ -4242,6 +4715,7 @@ static void rtl_eee_enable(struct r8152
case RTL_VER_06:
case RTL_VER_08:
case RTL_VER_09:
if (enable) {
r8153_eee_en(tp, true);
ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv);
-@@ -4247,6 +4721,19 @@ static void rtl_eee_enable(struct r8152
+@@ -4250,6 +4724,19 @@ static void rtl_eee_enable(struct r8152
ocp_reg_write(tp, OCP_EEE_ADV, 0);
}
break;
default:
break;
}
-@@ -4293,6 +4780,20 @@ static void wait_oob_link_list_ready(str
+@@ -4296,6 +4783,20 @@ static void wait_oob_link_list_ready(str
}
}
static void r8152b_exit_oob(struct r8152 *tp)
{
u32 ocp_data;
-@@ -4343,7 +4844,7 @@ static void r8152b_exit_oob(struct r8152
+@@ -4346,7 +4847,7 @@ static void r8152b_exit_oob(struct r8152
}
/* TX share fifo free credit full threshold */
ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD);
ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_HIGH);
-@@ -4520,6 +5021,21 @@ static int r8153b_post_firmware_1(struct
+@@ -4523,6 +5024,21 @@ static int r8153b_post_firmware_1(struct
return 0;
}
static void r8153_aldps_en(struct r8152 *tp, bool enable)
{
u16 data;
-@@ -4722,6 +5238,13 @@ static void r8153b_hw_phy_cfg(struct r81
+@@ -4725,6 +5241,13 @@ static void r8153b_hw_phy_cfg(struct r81
set_bit(PHY_RESET, &tp->flags);
}
static void rtl8153_change_mtu(struct r8152 *tp)
{
ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu));
-@@ -4809,6 +5332,7 @@ static void r8153_enter_oob(struct r8152
+@@ -4812,6 +5335,7 @@ static void r8153_enter_oob(struct r8152
case RTL_VER_08:
case RTL_VER_09:
/* Clear teredo wake event. bit[15:8] is the teredo wakeup
* type. Set it to zero. bits[7:0] are the W1C bits about
* the events. Set them to all 1 to clear them.
-@@ -4845,6 +5369,96 @@ static void rtl8153_disable(struct r8152
+@@ -4848,6 +5372,96 @@ static void rtl8153_disable(struct r8152
r8153_aldps_en(tp, true);
}
static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex,
u32 advertising)
{
-@@ -4893,58 +5507,73 @@ static int rtl8152_set_speed(struct r815
+@@ -4896,58 +5510,73 @@ static int rtl8152_set_speed(struct r815
tp->mii.force_media = 1;
} else {
}
bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
-@@ -5100,6 +5729,253 @@ static void rtl8153b_down(struct r8152 *
+@@ -5103,6 +5732,253 @@ static void rtl8153b_down(struct r8152 *
r8153_aldps_en(tp, true);
}
static bool rtl8152_in_nway(struct r8152 *tp)
{
u16 nway_state;
-@@ -5130,7 +6006,7 @@ static void set_carrier(struct r8152 *tp
+@@ -5133,7 +6009,7 @@ static void set_carrier(struct r8152 *tp
{
struct net_device *netdev = tp->netdev;
struct napi_struct *napi = &tp->napi;
speed = rtl8152_get_speed(tp);
-@@ -5143,7 +6019,7 @@ static void set_carrier(struct r8152 *tp
+@@ -5146,7 +6022,7 @@ static void set_carrier(struct r8152 *tp
rtl_start_rx(tp);
clear_bit(RTL8152_SET_RX_MODE, &tp->flags);
_rtl8152_set_rx_mode(netdev);
netif_wake_queue(netdev);
netif_info(tp, link, netdev, "carrier on\n");
} else if (netif_queue_stopped(netdev) &&
-@@ -5523,14 +6399,9 @@ static void r8153_init(struct r8152 *tp)
+@@ -5526,14 +6402,9 @@ static void r8153_init(struct r8152 *tp)
ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001);
r8153_u1u2en(tp, true);
usb_enable_lpm(tp->udev);
-@@ -5623,9 +6494,7 @@ static void r8153b_init(struct r8152 *tp
+@@ -5626,9 +6497,7 @@ static void r8153b_init(struct r8152 *tp
usb_enable_lpm(tp->udev);
/* MAC clock speed down */
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
ocp_data &= ~PLA_MCU_SPDWN_EN;
-@@ -5654,6 +6523,1069 @@ static void r8153b_init(struct r8152 *tp
+@@ -5657,6 +6526,1069 @@ static void r8153b_init(struct r8152 *tp
r8152_led_configuration(tp);
}
static int rtl8152_pre_reset(struct usb_interface *intf)
{
struct r8152 *tp = usb_get_intfdata(intf);
-@@ -6017,6 +7949,22 @@ int rtl8152_get_link_ksettings(struct ne
+@@ -6020,6 +7952,22 @@ int rtl8152_get_link_ksettings(struct ne
mii_ethtool_get_link_ksettings(&tp->mii, cmd);
mutex_unlock(&tp->control);
usb_autopm_put_interface(tp->intf);
-@@ -6060,6 +8008,10 @@ static int rtl8152_set_link_ksettings(st
+@@ -6063,6 +8011,10 @@ static int rtl8152_set_link_ksettings(st
cmd->link_modes.advertising))
advertising |= RTL_ADVERTISED_1000_FULL;
mutex_lock(&tp->control);
ret = rtl8152_set_speed(tp, cmd->base.autoneg, cmd->base.speed,
-@@ -6649,6 +8601,67 @@ static int rtl_ops_init(struct r8152 *tp
+@@ -6652,6 +8604,67 @@ static int rtl_ops_init(struct r8152 *tp
tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX;
break;
default:
ret = -ENODEV;
dev_err(&tp->intf->dev, "Unknown Device\n");
-@@ -6662,11 +8675,13 @@ static int rtl_ops_init(struct r8152 *tp
+@@ -6665,11 +8678,13 @@ static int rtl_ops_init(struct r8152 *tp
#define FIRMWARE_8153A_3 "rtl_nic/rtl8153a-3.fw"
#define FIRMWARE_8153A_4 "rtl_nic/rtl8153a-4.fw"
#define FIRMWARE_8153B_2 "rtl_nic/rtl8153b-2.fw"
static int rtl_fw_init(struct r8152 *tp)
{
-@@ -6692,6 +8707,11 @@ static int rtl_fw_init(struct r8152 *tp)
+@@ -6695,6 +8710,11 @@ static int rtl_fw_init(struct r8152 *tp)
rtl_fw->pre_fw = r8153b_pre_firmware_1;
rtl_fw->post_fw = r8153b_post_firmware_1;
break;
default:
break;
}
-@@ -6747,6 +8767,27 @@ u8 rtl8152_get_version(struct usb_interf
+@@ -6750,6 +8770,27 @@ u8 rtl8152_get_version(struct usb_interf
case 0x6010:
version = RTL_VER_09;
break;
default:
version = RTL_VER_UNKNOWN;
dev_info(&intf->dev, "Unknown version 0x%04x\n", ocp_data);
-@@ -6859,12 +8900,29 @@ static int rtl8152_probe(struct usb_inte
+@@ -6862,12 +8903,29 @@ static int rtl8152_probe(struct usb_inte
/* MTU range: 68 - 1500 or 9194 */
netdev->min_mtu = ETH_MIN_MTU;
switch (tp->version) {
break;
}
-@@ -6880,7 +8938,13 @@ static int rtl8152_probe(struct usb_inte
+@@ -6883,7 +8941,13 @@ static int rtl8152_probe(struct usb_inte
tp->advertising = RTL_ADVERTISED_10_HALF | RTL_ADVERTISED_10_FULL |
RTL_ADVERTISED_100_HALF | RTL_ADVERTISED_100_FULL;
if (tp->mii.supports_gmii) {
tp->advertising |= RTL_ADVERTISED_1000_FULL;
}
tp->duplex = DUPLEX_FULL;
-@@ -6904,7 +8968,11 @@ static int rtl8152_probe(struct usb_inte
+@@ -6907,7 +8971,11 @@ static int rtl8152_probe(struct usb_inte
set_ethernet_addr(tp);
usb_set_intfdata(intf, tp);
ret = register_netdev(netdev);
if (ret != 0) {
-@@ -6940,7 +9008,8 @@ static void rtl8152_disconnect(struct us
+@@ -6943,7 +9011,8 @@ static void rtl8152_disconnect(struct us
unregister_netdev(tp->netdev);
tasklet_kill(&tp->tx_tl);
cancel_delayed_work_sync(&tp->hw_phy_work);
rtl8152_release_firmware(tp);
free_netdev(tp->netdev);
}
-@@ -6960,13 +9029,28 @@ static void rtl8152_disconnect(struct us
+@@ -6963,13 +9032,28 @@ static void rtl8152_disconnect(struct us
.idProduct = (prod), \
.bInterfaceClass = USB_CLASS_COMM, \
.bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
};
enum rtl_version {
-@@ -4002,6 +4063,162 @@ static int rtl_post_ram_code(struct r815
+@@ -4005,6 +4066,162 @@ static int rtl_post_ram_code(struct r815
return 0;
}
static bool rtl8152_is_fw_phy_nc_ok(struct r8152 *tp, struct fw_phy_nc *phy)
{
u32 length;
-@@ -4322,6 +4539,10 @@ static long rtl8152_check_firmware(struc
+@@ -4325,6 +4542,10 @@ static long rtl8152_check_firmware(struc
case RTL_FW_PHY_START:
if (test_bit(FW_FLAGS_START, &fw_flags) ||
test_bit(FW_FLAGS_NC, &fw_flags) ||
test_bit(FW_FLAGS_STOP, &fw_flags)) {
dev_err(&tp->intf->dev,
"check PHY_START fail\n");
-@@ -4370,7 +4591,153 @@ static long rtl8152_check_firmware(struc
+@@ -4373,7 +4594,153 @@ static long rtl8152_check_firmware(struc
goto fail;
}
__set_bit(FW_FLAGS_NC, &fw_flags);
break;
default:
dev_warn(&tp->intf->dev, "Unknown type %u is found\n",
-@@ -4393,6 +4760,143 @@ fail:
+@@ -4396,6 +4763,143 @@ fail:
return ret;
}
static void rtl8152_fw_phy_nc_apply(struct r8152 *tp, struct fw_phy_nc *phy)
{
u16 mode_reg, bp_index;
-@@ -4446,6 +4950,12 @@ static void rtl8152_fw_mac_apply(struct
+@@ -4449,6 +4953,12 @@ static void rtl8152_fw_mac_apply(struct
return;
}
rtl_clear_bp(tp, type);
/* Enable backup/restore of MACDBG. This is required after clearing PLA
-@@ -4481,7 +4991,6 @@ static void rtl8152_fw_mac_apply(struct
+@@ -4484,7 +4994,6 @@ static void rtl8152_fw_mac_apply(struct
ocp_write_word(tp, type, bp_en_addr,
__le16_to_cpu(mac->bp_en_value));
if (fw_ver_reg)
ocp_write_byte(tp, MCU_TYPE_USB, fw_ver_reg,
mac->fw_ver_data);
-@@ -4496,7 +5005,7 @@ static void rtl8152_apply_firmware(struc
+@@ -4499,7 +5008,7 @@ static void rtl8152_apply_firmware(struc
struct fw_header *fw_hdr;
struct fw_phy_patch_key *key;
u16 key_addr = 0;
if (IS_ERR_OR_NULL(rtl_fw->fw))
return;
-@@ -4518,17 +5027,40 @@ static void rtl8152_apply_firmware(struc
+@@ -4521,17 +5030,40 @@ static void rtl8152_apply_firmware(struc
rtl8152_fw_mac_apply(tp, (struct fw_mac *)block);
break;
case RTL_FW_PHY_START:
default:
break;
}
-@@ -5036,6 +5568,21 @@ static int r8153c_post_firmware_1(struct
+@@ -5039,6 +5571,21 @@ static int r8153c_post_firmware_1(struct
return 0;
}
static void r8153_aldps_en(struct r8152 *tp, bool enable)
{
u16 data;
-@@ -8676,12 +9223,16 @@ static int rtl_ops_init(struct r8152 *tp
+@@ -8679,12 +9226,16 @@ static int rtl_ops_init(struct r8152 *tp
#define FIRMWARE_8153A_4 "rtl_nic/rtl8153a-4.fw"
#define FIRMWARE_8153B_2 "rtl_nic/rtl8153b-2.fw"
#define FIRMWARE_8153C_1 "rtl_nic/rtl8153c-1.fw"
static int rtl_fw_init(struct r8152 *tp)
{
-@@ -8707,6 +9258,14 @@ static int rtl_fw_init(struct r8152 *tp)
+@@ -8710,6 +9261,14 @@ static int rtl_fw_init(struct r8152 *tp)
rtl_fw->pre_fw = r8153b_pre_firmware_1;
rtl_fw->post_fw = r8153b_post_firmware_1;
break;
/* Information for net */
#define NET_VERSION "11"
-@@ -8133,6 +8133,39 @@ static void r8156b_init(struct r8152 *tp
+@@ -8136,6 +8136,39 @@ static void r8156b_init(struct r8152 *tp
tp->coalesce = 15000; /* 15 us */
}
static int rtl8152_pre_reset(struct usb_interface *intf)
{
struct r8152 *tp = usb_get_intfdata(intf);
-@@ -9371,10 +9404,8 @@ static int rtl8152_probe(struct usb_inte
+@@ -9374,10 +9407,8 @@ static int rtl8152_probe(struct usb_inte
if (version == RTL_VER_UNKNOWN)
return -ENODEV;
- MEDIA_BUS_FMT_RGB666_1X24_CPADHI
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
-@@ -2095,6 +2095,38 @@ static const struct panel_desc innolux_a
+@@ -2097,6 +2097,38 @@ static const struct panel_desc innolux_a
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode innolux_at070tn92_mode = {
.clock = 33333,
.hdisplay = 800,
-@@ -4082,6 +4114,9 @@ static const struct of_device_id platfor
+@@ -4084,6 +4116,9 @@ static const struct of_device_id platfor
.compatible = "innolux,at043tn24",
.data = &innolux_at043tn24,
}, {
--- a/drivers/char/hw_random/iproc-rng200.c
+++ b/drivers/char/hw_random/iproc-rng200.c
-@@ -263,6 +263,7 @@ static int iproc_rng200_probe(struct pla
+@@ -265,6 +265,7 @@ static int iproc_rng200_probe(struct pla
priv->rng.name = pdev->name;
priv->rng.cleanup = iproc_rng200_cleanup;
+++ /dev/null
-From 74abbfe99f43eb7466d26d9e48fbeb46b8f3d804 Mon Sep 17 00:00:00 2001
-From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
-Date: Tue, 20 Oct 2020 14:59:37 +0300
-Subject: [PATCH] ARM: dts: BCM5301X: Harmonize EHCI/OHCI DT nodes name
-
-In accordance with the Generic EHCI/OHCI bindings the corresponding node
-name is suppose to comply with the Generic USB HCD DT schema, which
-requires the USB nodes to have the name acceptable by the regexp:
-"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
-nodes are correctly named.
-
-Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 4 ++--
- arch/arm/boot/dts/bcm53573.dtsi | 4 ++--
- 2 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -267,7 +267,7 @@
-
- interrupt-parent = <&gic>;
-
-- ehci: ehci@21000 {
-+ ehci: usb@21000 {
- #usb-cells = <0>;
-
- compatible = "generic-ehci";
-@@ -289,7 +289,7 @@
- };
- };
-
-- ohci: ohci@22000 {
-+ ohci: usb@22000 {
- #usb-cells = <0>;
-
- compatible = "generic-ohci";
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -135,7 +135,7 @@
- #address-cells = <1>;
- #size-cells = <1>;
-
-- ehci: ehci@4000 {
-+ ehci: usb@4000 {
- compatible = "generic-ehci";
- reg = <0x4000 0x1000>;
- interrupt-parent = <&gic>;
-@@ -155,7 +155,7 @@
- };
- };
-
-- ohci: ohci@d000 {
-+ ohci: usb@d000 {
- #usb-cells = <0>;
-
- compatible = "generic-ohci";
+++ /dev/null
-From 9fb90ae6cae7f8fe4fbf626945f32cd9da2c3892 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 20 Sep 2021 16:10:23 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM53573 family SoC have Ethernet switch connected to the first Ethernet
-controller (accessible over MDIO).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm53573.dtsi | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -180,6 +180,24 @@
-
- gmac0: ethernet@5000 {
- reg = <0x5000 0x1000>;
-+
-+ mdio {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ switch: switch@1e {
-+ compatible = "brcm,bcm53125";
-+ reg = <0x1e>;
-+
-+ status = "disabled";
-+
-+ /* ports are defined in board DTS */
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+ };
-+ };
- };
-
- gmac1: ethernet@b000 {
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-@@ -25,13 +25,13 @@
+@@ -26,13 +26,13 @@
gpio-keys {
compatible = "gpio-keys";
+++ /dev/null
-From 05d2c3d552b8c92fc397377d9d1112fc58e2cd59 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 7 Jul 2023 13:40:02 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Drop nonexistent #usb-cells
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Such property simply doesn't exist (is not documented or used anywhere).
-
-This fixes:
-arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: usb@d000: Unevaluated properties are not allowed ('#usb-cells' was unexpected)
- From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20230707114004.2740-2-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
----
- arch/arm/boot/dts/broadcom/bcm53573.dtsi | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -156,8 +156,6 @@
- };
-
- ohci: usb@d000 {
-- #usb-cells = <0>;
--
- compatible = "generic-ohci";
- reg = <0xd000 0x1000>;
- interrupt-parent = <&gic>;
+++ /dev/null
-From 3392ef368d9b04622fe758b1079b512664b6110a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 7 Jul 2023 13:40:03 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Add cells sizes to PCIe node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes:
-arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: pcie@2000: '#address-cells' is a required property
- From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
-arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: pcie@2000: '#size-cells' is a required property
- From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
-
-Two properties that need to be added later are "device_type" and
-"ranges". Adding "device_type" on its own causes a new warning and the
-value of "ranges" needs to be determined yet.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20230707114004.2740-3-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
----
- arch/arm/boot/dts/broadcom/bcm53573.dtsi | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -127,6 +127,9 @@
-
- pcie0: pcie@2000 {
- reg = <0x00002000 0x1000>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
- };
-
- usb2: usb2@4000 {
+++ /dev/null
-From 2c0fd6b3d0778ceab40205315ccef74568490f17 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 7 Jul 2023 13:40:04 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Use updated "spi-gpio" binding properties
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Switch away from deprecated properties.
-
-This fixes:
-arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-sck: False schema does not allow [[3, 21, 0]]
- From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
-arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-miso: False schema does not allow [[3, 22, 0]]
- From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
-arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-mosi: False schema does not allow [[3, 23, 0]]
- From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
-arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: 'sck-gpios' is a required property
- From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
-arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: Unevaluated properties are not allowed ('gpio-miso', 'gpio-mosi', 'gpio-sck' were unexpected)
- From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20230707114004.2740-4-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
----
- arch/arm/boot/dts/broadcom/bcm947189acdbmr.dts | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/bcm947189acdbmr.dts
-+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
-@@ -60,9 +60,9 @@
- spi {
- compatible = "spi-gpio";
- num-chipselects = <1>;
-- gpio-sck = <&chipcommon 21 0>;
-- gpio-miso = <&chipcommon 22 0>;
-- gpio-mosi = <&chipcommon 23 0>;
-+ sck-gpios = <&chipcommon 21 0>;
-+ miso-gpios = <&chipcommon 22 0>;
-+ mosi-gpios = <&chipcommon 23 0>;
- cs-gpios = <&chipcommon 24 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+++ /dev/null
-From: Aleksey Nasibulin <alealexpro100@ya.ru>
-Date: Wed, 12 Jul 2023 03:40:17 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Extend RAM to full 256MB for Linksys
- EA6500 V2
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Linksys ea6500-v2 have 256MB of ram. Currently we only use 128MB.
-Expand the definition to use all the available RAM.
-
-Fixes: 03e96644d7a8 ("ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2")
-Signed-off-by: Aleksey Nasibulin <alealexpro100@ya.ru>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Cc: stable@vger.kernel.org
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20230712014017.28123-1-ansuelsmth@gmail.com
-Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
----
- arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-@@ -19,7 +19,8 @@
-
- memory@0 {
- device_type = "memory";
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000>,
-+ <0x88000000 0x08000000>;
- };
-
- gpio-keys {
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -45,3 +45,16 @@
+@@ -58,3 +58,16 @@
};
};
};
+};
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -81,3 +81,16 @@
+@@ -94,3 +94,16 @@
};
};
};
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -60,3 +60,7 @@
+@@ -73,3 +73,7 @@
};
};
};
+};
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -96,3 +96,7 @@
+@@ -109,3 +109,7 @@
};
};
};
if (unlikely(mac < 0 || mac >= MTK_MAC_COUNT ||
!eth->netdev[mac]))
-@@ -2275,6 +2275,9 @@ static void mtk_gdm_config(struct mtk_et
+@@ -2278,6 +2278,9 @@ static void mtk_gdm_config(struct mtk_et
val |= config;
obj-$(CONFIG_NET_MEDIATEK_STAR_EMAC) += mtk_star_emac.o
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2300,7 +2300,10 @@ static int mtk_open(struct net_device *d
+@@ -2303,7 +2303,10 @@ static int mtk_open(struct net_device *d
/* we run 2 netdevs on the same dma ring so we only bring it up once */
if (!refcount_read(ð->dma_refcnt)) {
if (err)
if (err) {
-@@ -2308,7 +2311,10 @@ static int mtk_open(struct net_device *d
+@@ -2311,7 +2314,10 @@ static int mtk_open(struct net_device *d
return err;
}
napi_enable(ð->tx_napi);
napi_enable(ð->rx_napi);
-@@ -2375,6 +2381,9 @@ static int mtk_stop(struct net_device *d
+@@ -2378,6 +2384,9 @@ static int mtk_stop(struct net_device *d
mtk_dma_free(eth);
return 0;
}
-@@ -3103,6 +3112,13 @@ static int mtk_probe(struct platform_dev
+@@ -3106,6 +3115,13 @@ static int mtk_probe(struct platform_dev
goto err_free_dev;
}
for (i = 0; i < MTK_MAX_DEVS; i++) {
if (!eth->netdev[i])
continue;
-@@ -3177,6 +3193,7 @@ static const struct mtk_soc_data mt7621_
+@@ -3180,6 +3196,7 @@ static const struct mtk_soc_data mt7621_
.hw_features = MTK_HW_FEATURES,
.required_clks = MT7621_CLKS_BITMAP,
.required_pctl = false,
};
static const struct mtk_soc_data mt7622_data = {
-@@ -3185,6 +3202,7 @@ static const struct mtk_soc_data mt7622_
+@@ -3188,6 +3205,7 @@ static const struct mtk_soc_data mt7622_
.hw_features = MTK_HW_FEATURES,
.required_clks = MT7622_CLKS_BITMAP,
.required_pctl = false,
obj-$(CONFIG_NET_MEDIATEK_STAR_EMAC) += mtk_star_emac.o
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2859,6 +2859,7 @@ static const struct net_device_ops mtk_n
+@@ -2862,6 +2862,7 @@ static const struct net_device_ops mtk_n
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = mtk_poll_controller,
#endif
};
static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
-@@ -3117,6 +3118,10 @@ static int mtk_probe(struct platform_dev
+@@ -3120,6 +3121,10 @@ static int mtk_probe(struct platform_dev
eth->base + MTK_ETH_PPE_BASE, 2);
if (err)
goto err_free_dev;
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2235,7 +2235,7 @@ static int mtk_start_dma(struct mtk_eth
+@@ -2238,7 +2238,7 @@ static int mtk_start_dma(struct mtk_eth
if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) {
mtk_w32(eth,
MTK_TX_WB_DDONE | MTK_TX_DMA_EN |
if (mtk_queue_stopped(eth) &&
(atomic_read(&ring->free_count) > ring->thresh))
mtk_wake_queue(eth);
-@@ -2171,6 +2186,7 @@ static irqreturn_t mtk_handle_irq_rx(int
+@@ -2174,6 +2189,7 @@ static irqreturn_t mtk_handle_irq_rx(int
{
struct mtk_eth *eth = _eth;
if (likely(napi_schedule_prep(ð->rx_napi))) {
__napi_schedule(ð->rx_napi);
mtk_rx_irq_disable(eth, MTK_RX_DONE_INT);
-@@ -2183,6 +2199,7 @@ static irqreturn_t mtk_handle_irq_tx(int
+@@ -2186,6 +2202,7 @@ static irqreturn_t mtk_handle_irq_tx(int
{
struct mtk_eth *eth = _eth;
if (likely(napi_schedule_prep(ð->tx_napi))) {
__napi_schedule(ð->tx_napi);
mtk_tx_irq_disable(eth, MTK_TX_DONE_INT);
-@@ -2371,6 +2388,9 @@ static int mtk_stop(struct net_device *d
+@@ -2374,6 +2391,9 @@ static int mtk_stop(struct net_device *d
napi_disable(ð->tx_napi);
napi_disable(ð->rx_napi);
if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA))
mtk_stop_dma(eth, MTK_QDMA_GLO_CFG);
mtk_stop_dma(eth, MTK_PDMA_GLO_CFG);
-@@ -2423,6 +2443,64 @@ err_disable_clks:
+@@ -2426,6 +2446,64 @@ err_disable_clks:
return ret;
}
static int mtk_hw_init(struct mtk_eth *eth)
{
int i, val, ret;
-@@ -2444,9 +2522,6 @@ static int mtk_hw_init(struct mtk_eth *e
+@@ -2447,9 +2525,6 @@ static int mtk_hw_init(struct mtk_eth *e
goto err_disable_pm;
}
/* disable delay and normal interrupt */
mtk_tx_irq_disable(eth, ~0);
mtk_rx_irq_disable(eth, ~0);
-@@ -2485,11 +2560,11 @@ static int mtk_hw_init(struct mtk_eth *e
+@@ -2488,11 +2563,11 @@ static int mtk_hw_init(struct mtk_eth *e
/* Enable RX VLan Offloading */
mtk_w32(eth, 1, MTK_CDMP_EG_CTRL);
mtk_tx_irq_disable(eth, ~0);
mtk_rx_irq_disable(eth, ~0);
-@@ -2994,6 +3069,13 @@ static int mtk_probe(struct platform_dev
+@@ -2997,6 +3072,13 @@ static int mtk_probe(struct platform_dev
spin_lock_init(ð->page_lock);
spin_lock_init(ð->tx_irq_lock);
spin_lock_init(ð->rx_irq_lock);
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2075,25 +2075,22 @@ static int mtk_set_features(struct net_d
+@@ -2078,25 +2078,22 @@ static int mtk_set_features(struct net_d
/* wait for DMA to finish whatever it is doing before we start using it again */
static int mtk_dma_busy_wait(struct mtk_eth *eth)
{
return buf_size;
}
-@@ -2631,6 +2631,35 @@ static void mtk_uninit(struct net_device
+@@ -2634,6 +2634,35 @@ static void mtk_uninit(struct net_device
mtk_rx_irq_disable(eth, ~0);
}
static int mtk_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct mtk_mac *mac = netdev_priv(dev);
-@@ -2927,6 +2956,7 @@ static const struct net_device_ops mtk_n
+@@ -2930,6 +2959,7 @@ static const struct net_device_ops mtk_n
.ndo_set_mac_address = mtk_set_mac_address,
.ndo_validate_addr = eth_validate_addr,
.ndo_do_ioctl = mtk_do_ioctl,
.ndo_tx_timeout = mtk_tx_timeout,
.ndo_get_stats64 = mtk_get_stats64,
.ndo_fix_features = mtk_fix_features,
-@@ -3029,7 +3059,10 @@ static int mtk_add_mac(struct mtk_eth *e
+@@ -3032,7 +3062,10 @@ static int mtk_add_mac(struct mtk_eth *e
eth->netdev[id]->irq = eth->irq[0];
eth->netdev[id]->dev.of_node = np;
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2605,14 +2605,11 @@ static int __init mtk_init(struct net_de
+@@ -2608,14 +2608,11 @@ static int __init mtk_init(struct net_de
{
struct mtk_mac *mac = netdev_priv(dev);
struct mtk_eth *eth = mac->hw;
#ifdef CONFIG_MODVERSIONS
-@@ -3251,9 +3253,11 @@ static int setup_load_info(struct load_i
+@@ -3262,9 +3264,11 @@ static int setup_load_info(struct load_i
static int check_modinfo(struct module *mod, struct load_info *info, int flags)
{
if (flags & MODULE_INIT_IGNORE_VERMAGIC)
modmagic = NULL;
-@@ -3274,6 +3278,7 @@ static int check_modinfo(struct module *
+@@ -3285,6 +3289,7 @@ static int check_modinfo(struct module *
mod->name);
add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK);
}
#include <linux/crc32.h>
#include <linux/if_vlan.h>
#include <linux/uaccess.h>
-@@ -5303,6 +5304,22 @@ static void rtl_tally_reset(struct r8152
+@@ -5306,6 +5307,22 @@ static void rtl_tally_reset(struct r8152
ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
}
static void r8152b_init(struct r8152 *tp)
{
u32 ocp_data;
-@@ -5344,6 +5361,8 @@ static void r8152b_init(struct r8152 *tp
+@@ -5347,6 +5364,8 @@ static void r8152b_init(struct r8152 *tp
ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
}
static void r8153_init(struct r8152 *tp)
-@@ -5489,6 +5508,8 @@ static void r8153_init(struct r8152 *tp)
+@@ -5492,6 +5511,8 @@ static void r8153_init(struct r8152 *tp)
tp->coalesce = COALESCE_SLOW;
break;
}
}
static void r8153b_init(struct r8152 *tp)
-@@ -5575,6 +5596,8 @@ static void r8153b_init(struct r8152 *tp
+@@ -5578,6 +5599,8 @@ static void r8153b_init(struct r8152 *tp
rtl_tally_reset(tp);
tp->coalesce = 15000; /* 15 us */
#define QUECTEL_VENDOR_ID 0x2c7c
/* These Quectel products use Quectel's vendor ID */
-@@ -1179,6 +1181,11 @@ static const struct usb_device_id option
+@@ -1180,6 +1182,11 @@ static const struct usb_device_id option
.driver_info = ZLP },
{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
.driver_info = RSVD(4) },
struct dst_entry *__sk_dst_check(struct sock *sk, u32 cookie)
{
struct dst_entry *dst = __sk_dst_get(sk);
-@@ -1837,9 +1851,11 @@ static void __sk_free(struct sock *sk)
+@@ -1838,9 +1852,11 @@ static void __sk_free(struct sock *sk)
if (likely(sk->sk_net_refcnt))
sock_inuse_add(sock_net(sk), -1);
--- a/net/core/sock.c
+++ b/net/core/sock.c
-@@ -3724,6 +3724,8 @@ static __net_initdata struct pernet_oper
+@@ -3725,6 +3725,8 @@ static __net_initdata struct pernet_oper
static int __init proto_init(void)
{
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
-@@ -2988,11 +2988,13 @@ static const struct seq_operations fib_r
+@@ -2989,11 +2989,13 @@ static const struct seq_operations fib_r
int __net_init fib_proc_init(struct net *net)
{
fib_triestat_seq_show, NULL))
goto out2;
-@@ -3003,17 +3005,21 @@ int __net_init fib_proc_init(struct net
+@@ -3004,17 +3006,21 @@ int __net_init fib_proc_init(struct net
return 0;
out3:
default y
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
-@@ -1084,6 +1084,8 @@ static u8 spi_nor_convert_3to4_erase(u8
+@@ -1085,6 +1085,8 @@ static u8 spi_nor_convert_3to4_erase(u8
static bool spi_nor_has_uniform_erase(const struct spi_nor *nor)
{
return !!nor->params->erase_map.uniform_erase_type;
}
-@@ -2580,6 +2582,7 @@ static int spi_nor_select_erase(struct s
+@@ -2581,6 +2583,7 @@ static int spi_nor_select_erase(struct s
{
struct spi_nor_erase_map *map = &nor->params->erase_map;
const struct spi_nor_erase_type *erase = NULL;
struct mtd_info *mtd = &nor->mtd;
u32 wanted_size = nor->info->sector_size;
int i;
-@@ -2612,8 +2615,9 @@ static int spi_nor_select_erase(struct s
+@@ -2613,8 +2616,9 @@ static int spi_nor_select_erase(struct s
*/
for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
if (map->erase_type[i].size) {
}
}
-@@ -2621,6 +2625,9 @@ static int spi_nor_select_erase(struct s
+@@ -2622,6 +2626,9 @@ static int spi_nor_select_erase(struct s
return -EINVAL;
mtd->erasesize = erase->size;
endif # MTD_SPI_NOR
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
-@@ -2813,6 +2813,21 @@ static void spi_nor_info_init_params(str
+@@ -2814,6 +2814,21 @@ static void spi_nor_info_init_params(str
*/
erase_mask = 0;
i = 0;
if (info->flags & SECT_4K_PMC) {
erase_mask |= BIT(i);
spi_nor_set_erase_type(&map->erase_type[i], 4096u,
-@@ -2824,6 +2839,7 @@ static void spi_nor_info_init_params(str
+@@ -2825,6 +2840,7 @@ static void spi_nor_info_init_params(str
SPINOR_OP_BE_4K);
i++;
}
+};
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
-@@ -2039,6 +2039,7 @@ static const struct spi_nor_manufacturer
+@@ -2040,6 +2040,7 @@ static const struct spi_nor_manufacturer
&spi_nor_winbond,
&spi_nor_xilinx,
&spi_nor_xmc,
static void rt_fibinfo_free(struct rtable __rcu **rtp)
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
-@@ -2736,6 +2736,7 @@ static const char *const rtn_type_names[
+@@ -2737,6 +2737,7 @@ static const char *const rtn_type_names[
[RTN_THROW] = "THROW",
[RTN_NAT] = "NAT",
[RTN_XRESOLVE] = "XRESOLVE",
ring->dma_size * sizeof(*ring->dma),
ring->dma,
ring->phys);
-@@ -2155,7 +2156,7 @@ static void mtk_dma_free(struct mtk_eth
+@@ -2158,7 +2159,7 @@ static void mtk_dma_free(struct mtk_eth
if (eth->netdev[i])
netdev_reset_queue(eth->netdev[i]);
if (eth->scratch_ring) {
MTK_DMA_SIZE * sizeof(struct mtk_tx_dma),
eth->scratch_ring,
eth->phy_scratch_ring);
-@@ -2507,6 +2508,8 @@ static void mtk_dim_tx(struct work_struc
+@@ -2510,6 +2511,8 @@ static void mtk_dim_tx(struct work_struc
static int mtk_hw_init(struct mtk_eth *eth)
{
int i, val, ret;
if (test_and_set_bit(MTK_HW_INIT, ð->state))
-@@ -2519,6 +2522,10 @@ static int mtk_hw_init(struct mtk_eth *e
+@@ -2522,6 +2525,10 @@ static int mtk_hw_init(struct mtk_eth *e
if (ret)
goto err_disable_pm;
if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) {
ret = device_reset(eth->dev);
if (ret) {
-@@ -3068,6 +3075,35 @@ free_netdev:
+@@ -3071,6 +3078,35 @@ free_netdev:
return err;
}
static int mtk_probe(struct platform_device *pdev)
{
struct device_node *mac_np;
-@@ -3081,6 +3117,7 @@ static int mtk_probe(struct platform_dev
+@@ -3084,6 +3120,7 @@ static int mtk_probe(struct platform_dev
eth->soc = of_device_get_match_data(&pdev->dev);
eth->dev = &pdev->dev;
eth->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(eth->base))
return PTR_ERR(eth->base);
-@@ -3129,6 +3166,16 @@ static int mtk_probe(struct platform_dev
+@@ -3132,6 +3169,16 @@ static int mtk_probe(struct platform_dev
}
}
static int mtk_msg_level = -1;
module_param_named(msg_level, mtk_msg_level, int, 0);
-@@ -3198,6 +3199,22 @@ static int mtk_probe(struct platform_dev
+@@ -3201,6 +3202,22 @@ static int mtk_probe(struct platform_dev
}
}
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2330,7 +2330,7 @@ static int mtk_open(struct net_device *d
+@@ -2333,7 +2333,7 @@ static int mtk_open(struct net_device *d
return err;
}
gdm_config = MTK_GDMA_TO_PPE;
mtk_gdm_config(eth, gdm_config);
-@@ -2404,7 +2404,7 @@ static int mtk_stop(struct net_device *d
+@@ -2407,7 +2407,7 @@ static int mtk_stop(struct net_device *d
mtk_dma_free(eth);
if (eth->soc->offload_version)
return 0;
}
-@@ -3290,10 +3290,11 @@ static int mtk_probe(struct platform_dev
+@@ -3293,10 +3293,11 @@ static int mtk_probe(struct platform_dev
}
if (eth->soc->offload_version) {
if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX &&
(trxd.rxd2 & RX_DMA_VTAG))
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
-@@ -3290,7 +3296,7 @@ static int mtk_probe(struct platform_dev
+@@ -3293,7 +3299,7 @@ static int mtk_probe(struct platform_dev
}
if (eth->soc->offload_version) {
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -3398,6 +3398,7 @@ static const struct mtk_soc_data mt7623_
+@@ -3401,6 +3401,7 @@ static const struct mtk_soc_data mt7623_
.hw_features = MTK_HW_FEATURES,
.required_clks = MT7623_CLKS_BITMAP,
.required_pctl = true,
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
-@@ -3168,6 +3168,7 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -3169,6 +3169,7 @@ int spi_nor_scan(struct spi_nor *nor, co
struct device *dev = nor->dev;
struct mtd_info *mtd = &nor->mtd;
struct device_node *np = spi_nor_get_flash_node(nor);
int ret;
int i;
-@@ -3222,7 +3223,12 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -3223,7 +3224,12 @@ int spi_nor_scan(struct spi_nor *nor, co
if (ret)
return ret;
+};
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
-@@ -2023,6 +2023,7 @@ int spi_nor_sr2_bit7_quad_enable(struct
+@@ -2024,6 +2024,7 @@ int spi_nor_sr2_bit7_quad_enable(struct
static const struct spi_nor_manufacturer *manufacturers[] = {
&spi_nor_atmel,
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2980,6 +2980,7 @@ static const struct net_device_ops mtk_n
+@@ -2983,6 +2983,7 @@ static const struct net_device_ops mtk_n
static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
{
const __be32 *_id = of_get_property(np, "reg", NULL);
phy_interface_t phy_mode;
struct phylink *phylink;
-@@ -3075,6 +3076,9 @@ static int mtk_add_mac(struct mtk_eth *e
+@@ -3078,6 +3079,9 @@ static int mtk_add_mac(struct mtk_eth *e
else
eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH_2K - MTK_RX_ETH_HLEN;
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
-@@ -1102,3 +1102,5 @@ config MMC_OWL
+@@ -1103,3 +1103,5 @@ config MMC_OWL
config MMC_SDHCI_EXTERNAL_DMA
bool
===============================================================================
--- a/arch/um/drivers/Kconfig
+++ b/arch/um/drivers/Kconfig
-@@ -146,6 +146,20 @@ config UML_NET
+@@ -136,6 +136,20 @@ config UML_NET
enable at least one of the following transport options to actually
make use of UML networking.
projects / openwrt / openwrt.git / commitdiff