target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac

   1 #!/bin/ash
   2
   3 [ "$ACTION" = "add" ] || exit 0
   4
   5 PHYNBR=${DEVPATH##*/phy}
   6
   7 [ -n $PHYNBR ] || exit 0
   8
   9 . /lib/functions.sh
  10 . /lib/functions/system.sh
  11 . /lib/functions/k2t.sh
  12
  13 board=$(board_name)
  14
  15 case "$board" in
  16         adtran,bsap1800-v2|\
  17         adtran,bsap1840)
  18                 macaddr_add "$(mtd_get_mac_binary 'Board data' 2)" $(($PHYNBR * 8 + 1)) > /sys${DEVPATH}/macaddress
  19                 ;;
  20         dlink,covr-p2500-a1)
  21                 [ "$PHYNBR" -eq 0 ] && \
  22                         mtd_get_mac_ascii art "protest_ath1_mac" > /sys${DEVPATH}/macaddress
  23                 [ "$PHYNBR" -eq 1 ] && \
  24                         mtd_get_mac_ascii art "protest_ath0_mac" > /sys${DEVPATH}/macaddress
  25                 ;;
  26         dlink,dap-1330-a1|\
  27         dlink,dap-1365-a1|\
  28         dlink,dch-g020-a1)
  29                 mtd_get_mac_text "mp" 0x13 > /sys${DEVPATH}/macaddress
  30                 ;;
  31         dlink,dap-2230-a1|\
  32         dlink,dap-3320-a1)
  33                 mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
  34                 ;;
  35         dlink,dap-2660-a1|\
  36         dlink,dap-2680-a1|\
  37         dlink,dap-2695-a1|\
  38         dlink,dap-3662-a1)
  39                 [ "$PHYNBR" -eq 0 ] && \
  40                         mtd_get_mac_ascii bdcfg "wlanmac_a" > /sys${DEVPATH}/macaddress
  41                 [ "$PHYNBR" -eq 1 ] && \
  42                         mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
  43                 ;;
  44         elecom,wab-s600-ps)
  45                 # set the 5G MAC address (= ethaddr + 1)
  46                 [ "$PHYNBR" -eq 0 ] && \
  47                         macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
  48                 # set the 2.4G MAC address (= ethaddr)
  49                 [ "$PHYNBR" -eq 1 ] && \
  50                         mtd_get_mac_ascii u-boot-env "ethaddr" > /sys${DEVPATH}/macaddress
  51                 ;;
  52         engenius,ecb1200|\
  53         engenius,ecb1750)
  54                 [ "$PHYNBR" -eq 0 ] && \
  55                 mtd_get_mac_ascii u-boot-env ethaddr > /sys${DEVPATH}/macaddress
  56                 ;;
  57         engenius,epg5000|\
  58         engenius,esr1200|\
  59         engenius,esr1750|\
  60         engenius,esr900)
  61                 macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" "$PHYNBR" > /sys${DEVPATH}/macaddress
  62                 ;;
  63         engenius,ews511ap)
  64                 [ "$PHYNBR" -eq 0 ] && \
  65                 macaddr_add $(cat /sys/class/net/eth0/address) 1 > /sys${DEVPATH}/macaddress
  66                 ;;
  67         extreme-networks,ws-ap3805i)
  68                 [ "$PHYNBR" -eq 0 ] && \
  69                 mtd_get_mac_ascii cfg1 RADIOADDR0 > /sys${DEVPATH}/macaddress
  70                 ;;
  71         iodata,wn-ac1167dgr|\
  72         iodata,wn-ac1600dgr|\
  73         iodata,wn-ac1600dgr2|\
  74         sitecom,wlr-7100|\
  75         sitecom,wlr-8100|\
  76         zyxel,nbg6616)
  77                 # There is no eeprom data for 5 GHz wlan in "art" partition
  78                 # which would allow to patch the macaddress
  79                 [ "$PHYNBR" -eq 0 ] && \
  80                         macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
  81                 ;;
  82         iodata,wn-ag300dgr)
  83                 # There is no eeprom data for 5 GHz wlan in "art" partition
  84                 # which would allow to patch the macaddress
  85                 [ "$PHYNBR" -eq 1 ] && \
  86                         macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
  87                 ;;
  88         nec,wf1200cr|\
  89         nec,wg1200cr|\
  90         qihoo,c301)
  91                 [ "$PHYNBR" -eq 0 ] && \
  92                         mtd_get_mac_ascii devdata wlan5mac > /sys${DEVPATH}/macaddress
  93                 ;;
  94         phicomm,k2t)
  95                 [ "$PHYNBR" -eq 0 ] && \
  96                         k2t_get_mac "5g_mac" > /sys${DEVPATH}/macaddress
  97                 # The K2T factory firmware does use LAN mac address as the 2.4G wifi mac address
  98                 [ "$PHYNBR" -eq 1 ] && \
  99                         k2t_get_mac "lan_mac" > /sys${DEVPATH}/macaddress
 100                 ;;
 101         siemens,ws-ap3610)
 102                 mtd_get_mac_ascii cfg1 RADIOADDR${PHYNBR} > /sys${DEVPATH}/macaddress
 103                 ;;
 104         tplink,deco-s4-v2)
 105                 base_mac=$(mtd_get_mac_encrypted_deco $(find_mtd_part config))
 106                 [ "$PHYNBR" -eq 0 ] && \
 107                         macaddr_add $base_mac 2 > /sys${DEVPATH}/macaddress
 108
 109                 ;;
 110         trendnet,tew-823dru)
 111                 # set the 2.4G interface mac address to LAN MAC
 112                 [ "$PHYNBR" -eq 1 ] && \
 113                         mtd_get_mac_text mac 4 > /sys${DEVPATH}/macaddress
 114                 # set the 5G interface mac address to WAN MAC + 1
 115                 [ "$PHYNBR" -eq 0 ] && \
 116                         macaddr_add "$(mtd_get_mac_text mac 0x18)" 1 > /sys${DEVPATH}/macaddress
 117                 ;;
 118         zyxel,nbg6616)
 119                 # Set mac address for 2.4g device
 120                 [ "$PHYNBR" -eq 1 ] && \
 121                         mtd_get_mac_ascii u-boot-env ethaddr > /sys${DEVPATH}/macaddress
 122                 ;;
 123         zyxel,nwa1123-ac)
 124                 [ "$PHYNBR" -eq 0 ] && \
 125                         mtd_get_mac_text mib0 0x66 > /sys${DEVPATH}/macaddress
 126                 ;;
 127         zyxel,nwa1123-ni)
 128                 [ "$PHYNBR" -eq 1 ] && \
 129                         mtd_get_mac_text mib0 0x66 > /sys${DEVPATH}/macaddress
 130                 ;;
 131 esac