mediatek: add firmware name for AQR PHYs on mt7988a-rfb

Fixes PHY probe in case there is no firmware in a connected EEPROM

Signed-off-by: Felix Fietkau <nbd@nbd.name>

diff --git a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso
index d21a61ad19fef3ae78acfc4c94e3c528bb364027..c471b9ed91da8dfa75ca806841fa17b87940b5a6 100644 (file)
--- a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso
+++ b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso
@@ -22,6 +22,7 @@
                        phy0: ethernet-phy@0 {
                                reg = <0>;
                                compatible = "ethernet-phy-ieee802.3-c45";
+                               firmware-name = "AQR-G4_v5.7.0-AQR_EVB_Generic_X3410_StdCfg_MDISwap_USX_ID46316_VER2140.cld";
                                reset-gpios = <&pio 72 GPIO_ACTIVE_LOW>;
                                reset-assert-us = <100000>;
                                reset-deassert-us = <221000>;

diff --git a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso
index 140391fc45a8f4d42639e3146cac4f405ac1d04b..1490f055b59bdb3b6308f752f8a88607e63a7243 100644 (file)
--- a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso
+++ b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso
@@ -22,6 +22,7 @@
                        phy8: ethernet-phy@8 {
                                reg = <8>;
                                compatible = "ethernet-phy-ieee802.3-c45";
+                               firmware-name = "AQR-G4_v5.7.0-AQR_EVB_Generic_X3410_StdCfg_MDISwap_USX_ID46316_VER2140.cld";
                                reset-gpios = <&pio 71 GPIO_ACTIVE_LOW>;
                                reset-assert-us = <100000>;
                                reset-deassert-us = <221000>;