From: Stan Grishin Date: Mon, 27 Feb 2023 00:04:33 +0000 (+0000) Subject: x86: base-files add support for Sophos 135r3/135r3w X-Git-Url: http://git.openwrt.org/feed/routing.git;lede-17.01?a=commitdiff_plain;h=c191c2d46f0080b8c6e6aee76b30ae9cf50d6e3e;p=openwrt%2Fstaging%2Fldir.git x86: base-files add support for Sophos 135r3/135r3w The Sophos SG/XG-135 revision 3 has odd numbering of eth ports where the WAN port (as marked on the case) is: `eth6` and `eth0`, `eth1`, `eth2`, `eth3`, `eth5`, `eth7`, `eth8` are LAN ports. Port `eth4` seems to be the SFP port. Also add the missing LED definition for supported Sophos devices. Original discussion at: https://forum.openwrt.org/t/openwrt-on-revision-3-of-sophos-desktop-appliances/152912 Signed-off-by: Stan Grishin --- diff --git a/target/linux/x86/base-files/etc/board.d/01_leds b/target/linux/x86/base-files/etc/board.d/01_leds index e639d10808..e41c78e62b 100644 --- a/target/linux/x86/base-files/etc/board.d/01_leds +++ b/target/linux/x86/base-files/etc/board.d/01_leds @@ -16,6 +16,13 @@ pc-engines-apu1|pc-engines-apu2|pc-engines-apu3|pc-engines-apu4|pc-engines-apu5| ucidef_set_led_netdev "lan" "LAN" "apu:green:2" "br-lan" ucidef_set_led_default "diag" "DIAG" "apu:green:1" "1" ;; +sophos-sg-105wr1|sophos-sg-125wr1|sophos-sg-135wr1|sophos-xg-105wr1|sophos-xg-125wr1|sophos-xg-135wr1) + ucidef_set_led_netdev "wlan" "WiFi" "ath9k-phy0" "phy0tpt" + ;; +sophos-sg-105wr2|sophos-sg-125wr2|sophos-sg-135wr2|sophos-xg-105wr2|sophos-xg-125wr2|sophos-xg-135wr2| +sophos-sg-105wr3|sophos-sg-125wr3|sophos-sg-135wr3|sophos-xg-105wr3|sophos-xg-125wr3|sophos-xg-135wr3) + ucidef_set_led_netdev "wlan" "WiFi" "ath10k-phy0" "phy0tpt" + ;; traverse-technologies-geos) ucidef_set_led_netdev "lan" "LAN" "geos:1" "br-lan" "tx rx" ucidef_set_led_netdev "wlan" "WiFi" "geos:2" "phy0tpt" diff --git a/target/linux/x86/base-files/etc/board.d/02_network b/target/linux/x86/base-files/etc/board.d/02_network index 094a45f914..e00e8c04dd 100644 --- a/target/linux/x86/base-files/etc/board.d/02_network +++ b/target/linux/x86/base-files/etc/board.d/02_network @@ -64,6 +64,10 @@ sophos-sg-135r2|sophos-xg-135r2| \ sophos-sg-135wr2|sophos-xg-135wr2) ucidef_set_interfaces_lan_wan "eth0 eth2 eth3 eth4 eth5 eth6 eth7" "eth1" ;; +sophos-sg-135r3|sophos-xg-135r3| \ +sophos-sg-135wr3|sophos-xg-135wr3) + ucidef_set_interfaces_lan_wan "eth0 eth1 eth2 eth3 eth5 eth7 eth8" "eth6" + ;; traverse-technologies-geos) ucidef_set_interface_lan "eth0 eth1" ucidef_add_atm_bridge "0" "35" "llc" "bridged"