ath79: ar: convert to mac-base

[openwrt/staging/hauke.git] / target / linux / ath79 / dts / ar9331_onion_omega.dts

diff --git a/target/linux/ath79/dts/ar9331_onion_omega.dts b/target/linux/ath79/dts/ar9331_onion_omega.dts
index 5d0fe33eefce901c65ffe84a1cebcef962cd1bc6..81fab872b5cc661873c64f39ffd1ecaa0c0691ff 100644 (file)
--- a/target/linux/ath79/dts/ar9331_onion_omega.dts
+++ b/target/linux/ath79/dts/ar9331_onion_omega.dts
@@ -1,69 +1,138 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
-#include "ar9331.dtsi"
-
 / {
        model = "Onion Omega";
        compatible = "onion,omega", "qca,ar9331";
 
        aliases {
                serial0 = &uart;
+               label-mac-device = &wmac;
+               led-boot = &led_system;
+               led-failsafe = &led_system;
+               led-running = &led_system;
+               led-upgrade = &led_system;
        };
 
        leds {
                compatible = "gpio-leds";
 
-               system {
-                       label = "onion:amber:system";
+               led_system: system {
+                       label = "amber:system";
                        gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
                };
        };
 
        keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <100>;
+               compatible = "gpio-keys";
 
-               button0 {
+               reset {
                        label = "reset";
                        linux,code = <KEY_RESTART>;
                        gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+                       debounce-interval = <60>;
                };
        };
+
+       reg_usb_vbus: reg_usb_vbus {
+               compatible = "regulator-fixed";
+               regulator-name = "usb_vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
 };
 
 &ref {
        clock-frequency = <25000000>;
 };
 
-&uart {
+&usb {
        status = "okay";
+
+       vbus-supply = <&reg_usb_vbus>;
+       dr_mode = "host";
 };
 
-&gpio {
+&usb_phy {
        status = "okay";
 };
 
-&usb {
-       dr_mode = "host";
+&eth0 {
        status = "okay";
+
+       compatible = "syscon", "simple-mfd";
 };
 
-&usb_phy {
+&eth1 {
        status = "okay";
+
+       nvmem-cells = <&macaddr_uboot_1fc00 (-1)>;
+       nvmem-cell-names = "mac-address";
+
+       gmac-config {
+               device = <&gmac>;
+               switch-phy-addr-swap = <4>;
+               switch-phy-swap = <4>;
+       };
 };
 
 &spi {
-       num-chipselects = <1>;
        status = "okay";
 
-       /* Winbond 25Q128FVSG SPI flash */
        flash@0 {
-               compatible = "winbond,w25q128", "jedec,spi-nor";
-               spi-max-frequency = <104000000>;
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <25000000>;
                reg = <0>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       uboot: partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x020000>;
+                               read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       macaddr_uboot_1fc00: macaddr@1fc00 {
+                                               compatible = "mac-base";
+                                               reg = <0x1fc00 0x6>;
+                                               #nvmem-cell-cells = <1>;
+                                       };
+                               };
+                       };
+
+                       partition@20000 {
+                               compatible = "tplink,firmware";
+                               label = "firmware";
+                               reg = <0x020000 0xfd0000>;
+                       };
+
+                       art: partition@ff0000 {
+                               label = "art";
+                               reg = <0xff0000 0x010000>;
+                               read-only;
+                       };
+               };
        };
 };
+
+&wmac {
+       status = "okay";
+
+       mtd-cal-data = <&art 0x1000>;
+
+       nvmem-cells = <&macaddr_uboot_1fc00 0>;
+       nvmem-cell-names = "mac-address";
+};