target/linux/ramips/dts/rt5350_trendnet_tew-714tru.dts

   1 #include "rt5350.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "trendnet,tew-714tru", "ralink,rt5350-soc";
   8         model = "TRENDnet TEW714TRU";
   9
  10         leds {
  11                 compatible = "gpio-leds";
  12
  13                 usb {
  14                         label = "red:usb";
  15                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  16                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  17                         linux,default-trigger = "usbport";
  18                 };
  19
  20                 wifi {
  21                         label = "green:wifi";
  22                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  23                 };
  24         };
  25
  26         keys {
  27                 compatible = "gpio-keys-polled";
  28                 poll-interval = <20>;
  29
  30                 reset {
  31                         label = "reset";
  32                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  33                         linux,code = <KEY_RESTART>;
  34                 };
  35
  36                 wps {
  37                         label = "wps";
  38                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  39                         linux,code = <KEY_WPS_BUTTON>;
  40                 };
  41         };
  42
  43         gpio_export {
  44                 compatible = "gpio-export";
  45                 #size-cells = <0>;
  46
  47                 repeater {
  48                         gpio-export,name = "repeater_switch";
  49                         gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
  50                 };
  51
  52                 wisp {
  53                         gpio-export,name = "wisp_switch";
  54                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
  55                 };
  56         };
  57 };
  58
  59 &spi0 {
  60         status = "okay";
  61
  62         flash@0 {
  63                 compatible = "jedec,spi-nor";
  64                 reg = <0>;
  65                 spi-max-frequency = <10000000>;
  66
  67                 partitions {
  68                         compatible = "fixed-partitions";
  69                         #address-cells = <1>;
  70                         #size-cells = <1>;
  71
  72                         partition@0 {
  73                                 label = "u-boot";
  74                                 reg = <0x0 0x30000>;
  75                                 read-only;
  76                         };
  77
  78                         partition@30000 {
  79                                 label = "u-boot-env";
  80                                 reg = <0x30000 0x10000>;
  81                                 read-only;
  82                         };
  83
  84                         factory: partition@40000 {
  85                                 label = "factory";
  86                                 reg = <0x40000 0x10000>;
  87                                 read-only;
  88
  89                                 nvmem-layout {
  90                                         compatible = "fixed-layout";
  91                                         #address-cells = <1>;
  92                                         #size-cells = <1>;
  93
  94                                         eeprom_factory_0: eeprom@0 {
  95                                                 reg = <0x0 0x200>;
  96                                         };
  97
  98                                         macaddr_factory_4: macaddr@4 {
  99                                                 reg = <0x4 0x6>;
 100                                         };
 101                                 };
 102                         };
 103
 104                         partition@50000 {
 105                                 compatible = "denx,uimage";
 106                                 label = "firmware";
 107                                 reg = <0x50000 0x7b0000>;
 108                         };
 109                 };
 110         };
 111 };
 112
 113 &state_default {
 114         gpio {
 115                 groups = "i2c", "jtag", "uartf";
 116                 function = "gpio";
 117         };
 118 };
 119
 120 &ethernet {
 121         nvmem-cells = <&macaddr_factory_4>;
 122         nvmem-cell-names = "mac-address";
 123 };
 124
 125 &esw {
 126         mediatek,portmap = <0x1>;
 127         mediatek,portdisable = <0x3e>;
 128 };
 129
 130 &wmac {
 131         nvmem-cells = <&eeprom_factory_0>;
 132         nvmem-cell-names = "eeprom";
 133 };