target/linux/ramips/dts/rt3883_trendnet_tew-691gr.dts

   1 #include "rt3883.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "trendnet,tew-691gr", "ralink,rt3883-soc";
   8         model = "TRENDnet TEW-691GR";
   9
  10         aliases {
  11                 led-boot = &led_wps;
  12                 led-failsafe = &led_wps;
  13                 led-running = &led_wps;
  14                 led-upgrade = &led_wps;
  15         };
  16
  17         flash@1c000000 {
  18                 compatible = "cfi-flash";
  19                 reg = <0x1c000000 0x800000>;
  20                 bank-width = <2>;
  21
  22                 partitions {
  23                         compatible = "fixed-partitions";
  24                         #address-cells = <1>;
  25                         #size-cells = <1>;
  26
  27                         partition@0 {
  28                                 reg = <0x0 0x0030000>;
  29                                 label = "u-boot";
  30                                 read-only;
  31                         };
  32
  33                         partition@30000 {
  34                                 reg = <0x00030000 0x00010000>;
  35                                 label = "u-boot-env";
  36                                 read-only;
  37                         };
  38
  39                         factory: partition@40000 {
  40                                 compatible = "nvmem-cells";
  41                                 label = "factory";
  42                                 reg = <0x00040000 0x00010000>;
  43                                 #address-cells = <1>;
  44                                 #size-cells = <1>;
  45                                 read-only;
  46
  47                                 eeprom_factory_0: eeprom@0 {
  48                                         reg = <0x0 0x200>;
  49                                 };
  50
  51                                 macaddr_factory_4: macaddr@4 {
  52                                         reg = <0x4 0x6>;
  53                                 };
  54                         };
  55
  56                         partition@50000 {
  57                                 compatible = "denx,uimage";
  58                                 reg = <0x00050000 0x007b0000>;
  59                                 label = "firmware";
  60                         };
  61                 };
  62         };
  63
  64         keys {
  65                 compatible = "gpio-keys-polled";
  66                 poll-interval = <100>;
  67
  68                 reset {
  69                         label = "reset";
  70                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  71                         linux,code = <KEY_RESTART>;
  72                 };
  73
  74                 wps {
  75                         label = "wps";
  76                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
  77                         linux,code = <KEY_WPS_BUTTON>;
  78                 };
  79
  80                 rfkill {
  81                         label = "rfkill";
  82                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  83                         linux,code = <KEY_RFKILL>;
  84                 };
  85         };
  86
  87         leds {
  88                 compatible = "gpio-leds";
  89
  90                 led_wps: wps {
  91                         label = "green:wps";
  92                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  93                 };
  94         };
  95 };
  96
  97 &gpio1 {
  98         status = "okay";
  99 };
 100
 101 &state_default {
 102         gpio {
 103                 groups = "spi", "i2c", "jtag", "uartf";
 104                 function = "gpio";
 105         };
 106 };
 107
 108 &ethernet {
 109         nvmem-cells = <&macaddr_factory_4>;
 110         nvmem-cell-names = "mac-address";
 111
 112         port@0 {
 113                 phy-handle = <&phy0>;
 114                 phy-mode = "rgmii";
 115         };
 116
 117         mdio-bus {
 118                 status = "okay";
 119
 120                 phy0: ethernet-phy@0 {
 121                         reg = <0>;
 122                         phy-mode = "rgmii";
 123                 };
 124         };
 125 };
 126
 127 &wmac {
 128         ralink,5ghz = <0>;
 129         nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_4>;
 130         nvmem-cell-names = "eeprom", "mac-address";
 131         mac-address-increment = <1>;
 132 };