target/linux/ramips/dts/rt3052_mofinetwork_mofi3500-3gn.dts

   1 #include "rt3050.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "mofinetwork,mofi3500-3gn", "ralink,rt3052-soc";
   8         model = "MoFi Network MOFI3500-3GN";
   9
  10         aliases {
  11                 led-boot = &led_status;
  12                 led-failsafe = &led_status;
  13                 led-running = &led_status;
  14                 led-upgrade = &led_status;
  15         };
  16
  17         flash@1f000000 {
  18                 compatible = "cfi-flash";
  19                 reg = <0x1f000000 0x800000>;
  20                 bank-width = <2>;
  21                 device-width = <2>;
  22
  23                 partitions {
  24                         compatible = "fixed-partitions";
  25                         #address-cells = <1>;
  26                         #size-cells = <1>;
  27
  28                         partition@0 {
  29                                 label = "u-boot";
  30                                 reg = <0x0 0x30000>;
  31                                 read-only;
  32                         };
  33
  34                         partition@30000 {
  35                                 label = "u-boot-env";
  36                                 reg = <0x30000 0x10000>;
  37                                 read-only;
  38                         };
  39
  40                         factory: partition@40000 {
  41                                 label = "factory";
  42                                 reg = <0x40000 0x10000>;
  43                                 read-only;
  44
  45                                 nvmem-layout {
  46                                         compatible = "fixed-layout";
  47                                         #address-cells = <1>;
  48                                         #size-cells = <1>;
  49
  50                                         eeprom_factory_0: eeprom@0 {
  51                                                 reg = <0x0 0x200>;
  52                                         };
  53                                 };
  54                         };
  55
  56                         partition@50000 {
  57                                 compatible = "denx,uimage";
  58                                 label = "firmware";
  59                                 reg = <0x50000 0x7b0000>;
  60                         };
  61                 };
  62         };
  63
  64         leds {
  65                 compatible = "gpio-leds";
  66
  67                 usb {
  68                         label = "green:usb";
  69                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  70                         trigger-sources = <&otg_port1>;
  71                         linux,default-trigger = "usbport";
  72                 };
  73
  74                 3g {
  75                         label = "green:3g";
  76                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  77                 };
  78
  79                 led_status: status {
  80                         label = "green:status";
  81                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  82                 };
  83
  84                 wps {
  85                         label = "green:wps";
  86                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  87                 };
  88         };
  89
  90         keys {
  91                 compatible = "gpio-keys-polled";
  92                 poll-interval = <20>;
  93
  94                 reset {
  95                         label = "reset";
  96                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  97                         linux,code = <KEY_RESTART>;
  98                 };
  99
 100                 connect {
 101                         label = "connect";
 102                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 103                         linux,code = <KEY_CONNECT>;
 104                 };
 105
 106                 wps {
 107                         label = "wps";
 108                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
 109                         linux,code = <KEY_WPS_BUTTON>;
 110                 };
 111         };
 112 };
 113
 114 &state_default {
 115         gpio {
 116                 groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 117                 function = "gpio";
 118         };
 119 };
 120
 121 &esw {
 122         mediatek,portmap = <0x2f>;
 123 };
 124
 125 &wmac {
 126         nvmem-cells = <&eeprom_factory_0>;
 127         nvmem-cell-names = "eeprom";
 128 };
 129
 130 &otg {
 131         status = "okay";
 132 };