target/linux/ramips/dts/mt7628an_tplink_archer-c20-v4.dts

   1 #include "mt7628an_tplink_8m.dtsi"
   2
   3 / {
   4         compatible = "tplink,archer-c20-v4", "mediatek,mt7628an-soc";
   5         model = "TP-Link Archer C20 v4";
   6
   7         aliases {
   8                 led-boot = &led_power;
   9                 led-failsafe = &led_power;
  10                 led-running = &led_power;
  11                 led-upgrade = &led_power;
  12         };
  13
  14         leds {
  15                 compatible = "gpio-leds";
  16
  17                 lan {
  18                         function = LED_FUNCTION_LAN;
  19                         color = <LED_COLOR_ID_GREEN>;
  20                         gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
  21                 };
  22
  23                 led_power: power {
  24                         function = LED_FUNCTION_POWER;
  25                         color = <LED_COLOR_ID_GREEN>;
  26                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 wan {
  30                         function = LED_FUNCTION_WAN;
  31                         color = <LED_COLOR_ID_GREEN>;
  32                         gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 wan_orange {
  36                         function = LED_FUNCTION_WAN;
  37                         color = <LED_COLOR_ID_ORANGE>;
  38                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 wlan5g {
  42                         label = "green:wlan5g";
  43                         gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
  44                         linux,default-trigger = "phy1tpt";
  45                 };
  46
  47                 wlan2g {
  48                         label = "green:wlan2g";
  49                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
  50                         linux,default-trigger = "phy0tpt";
  51                 };
  52
  53                 wps {
  54                         function = LED_FUNCTION_WPS;
  55                         color = <LED_COLOR_ID_GREEN>;
  56                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
  57                 };
  58         };
  59
  60         keys {
  61                 compatible = "gpio-keys";
  62
  63                 reset {
  64                         label = "reset";
  65                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  66                         linux,code = <KEY_RESTART>;
  67                 };
  68
  69                 rfkill {
  70                         label = "rfkill";
  71                         gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
  72                         linux,code = <KEY_RFKILL>;
  73                 };
  74         };
  75 };
  76
  77 &ehci {
  78         status = "disabled";
  79 };
  80
  81 &ohci {
  82         status = "disabled";
  83 };
  84
  85 &wmac {
  86         status = "okay";
  87
  88         nvmem-cells = <&eeprom_factory_20000>, <&macaddr_factory_f100 (-2)>;
  89         nvmem-cell-names = "eeprom", "mac-address";
  90 };
  91
  92 &esw {
  93         mediatek,portmap = <0x3e>;
  94 };
  95
  96 &state_default {
  97         gpio {
  98                 groups = "i2s", "gpio", "refclk", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt";
  99                 function = "gpio";
 100         };
 101 };
 102
 103 &pcie {
 104         status = "okay";
 105 };
 106
 107 &pcie0 {
 108         mt76@0,0 {
 109                 reg = <0x0000 0 0 0 0>;
 110                 ieee80211-freq-limit = <5000000 6000000>;
 111                 nvmem-cells = <&eeprom_factory_28000>, <&macaddr_factory_f100 (-1)>;
 112                 nvmem-cell-names = "eeprom", "mac-address";
 113         };
 114 #include <dt-bindings/leds/common.h>
 115
 116 };