target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac

   1 [ "$ACTION" == "add" ] || exit 0
   2
   3 PHYNBR=${DEVPATH##*/phy}
   4
   5 [ -n $PHYNBR ] || exit 0
   6
   7 . /lib/functions.sh
   8 . /lib/functions/system.sh
   9
  10 board=$(board_name)
  11
  12 case "$board" in
  13         acer,predator-w6)
  14                 key_path="/var/qcidata/data"
  15                 [ "$PHYNBR" = "0" ] && cat $key_path/2gMAC > /sys${DEVPATH}/macaddress
  16                 [ "$PHYNBR" = "1" ] && cat $key_path/6gMAC > /sys${DEVPATH}/macaddress
  17                 [ "$PHYNBR" = "2" ] && cat $key_path/5gMAC > /sys${DEVPATH}/macaddress
  18                 ;;
  19         asus,rt-ax59u)
  20                 CI_UBIPART="UBI_DEV"
  21                 addr=$(mtd_get_mac_binary_ubi "Factory" 0x4)
  22                 # Originally, phy1 is phy0 mac with LA and 28th bits set. However, this would conflict
  23                 # addresses on multiple VIFs with the other radio when bit 28 is already set.
  24                 # Set LA and 28 bits and increment mac-address instead.
  25                 [ "$PHYNBR" = "1" ] && \
  26                         macaddr_setbit_la $(macaddr_setbit $(macaddr_add $addr 1) 28) > \
  27                         /sys${DEVPATH}/macaddress
  28                 ;;
  29         asus,tuf-ax4200|\
  30         asus,tuf-ax6000)
  31                 CI_UBIPART="UBI_DEV"
  32                 addr=$(mtd_get_mac_binary_ubi "Factory" 0x4)
  33                 # Originally, phy0 is phy1 mac with LA bit set. However, this would conflict
  34                 # addresses on multiple VIFs with the other radio. Set LA bit and increment
  35                 # mac-address instead.
  36                 [ "$PHYNBR" = "0" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress
  37                 [ "$PHYNBR" = "1" ] && echo "$addr" > /sys${DEVPATH}/macaddress
  38                 ;;
  39         bananapi,bpi-r3)
  40                 addr=$(cat /sys/class/net/eth0/address)
  41                 [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
  42                 [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
  43                 ;;
  44         cetron,ct3003)
  45                 addr=$(mtd_get_mac_binary "art" 0)
  46                 [ "$PHYNBR" = "0" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
  47                 [ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 2) > /sys${DEVPATH}/macaddress
  48                 ;;
  49         cmcc,rax3000m)
  50                 case "$(cmdline_get_var root)" in
  51                 /dev/mmc*)
  52                         addr=$(mmc_get_mac_binary factory 0xa)
  53                         ;;
  54                 *)
  55                         addr=$(mtd_get_mac_binary factory 0xa)
  56                         ;;
  57                 esac
  58                 [ "$PHYNBR" = "1" ] && echo "$addr" > /sys${DEVPATH}/macaddress
  59                 ;;
  60         comfast,cf-e393ax)
  61                 addr=$(mtd_get_mac_binary "Factory" 0x8000)
  62                 [ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
  63                 ;;
  64         cudy,wr3000-v1)
  65                 addr=$(mtd_get_mac_binary bdinfo 0xde00)
  66                 # Originally, phy0 is phy1 mac with LA bit set. However, this would conflict
  67                 # addresses on multiple VIFs with the other radio. Set LA bit and increment
  68                 # mac-address instead.
  69                 [ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
  70                 [ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress
  71                 ;;
  72         glinet,gl-mt6000)
  73                 addr=$(mmc_get_mac_binary factory 0x04)
  74                 [ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
  75                 [ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
  76                 ;;
  77         h3c,magic-nx30-pro)
  78                 addr=$(mtd_get_mac_ascii pdt_data_1 ethaddr)
  79                 [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
  80                 [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
  81                 ;;
  82         jcg,q30-pro)
  83                 # Originally, phy1 is phy0 mac with LA bit set. However, this would conflict
  84                 # addresses on multiple VIFs with the other radio. Use label mac to set LA bit.
  85                 [ "$PHYNBR" = "1" ] && macaddr_setbit_la $(get_mac_label) > /sys${DEVPATH}/macaddress
  86                 ;;
  87         jdcloud,re-cp-03)
  88                 [ "$PHYNBR" = "1" ] && mmc_get_mac_binary factory 0xa > /sys${DEVPATH}/macaddress
  89                 ;;
  90         mercusys,mr90x-v1)
  91                 addr=$(get_mac_binary "/tmp/tp_data/default-mac" 0)
  92                 [ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
  93                 [ "$PHYNBR" = "1" ] && macaddr_add $addr -1 > /sys${DEVPATH}/macaddress
  94                 ;;
  95         netgear,wax220)
  96                 hw_mac_addr=$(mtd_get_mac_ascii u-boot-env mac)
  97                 [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
  98                 [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress
  99                 ;;
 100         qihoo,360t7)
 101                 addr=$(mtd_get_mac_ascii factory lanMac)
 102                 [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
 103                 [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
 104                 ;;
 105         smartrg,sdg-8612|\
 106         smartrg,sdg-8614|\
 107         smartrg,sdg-8622|\
 108         smartrg,sdg-8632)
 109                 addr=$(mmc_get_mac_ascii mfginfo MFG_MAC)
 110                 [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
 111                 [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
 112                 [ "$PHYNBR" = "2" ] && macaddr_add $addr 4 > /sys${DEVPATH}/macaddress
 113                 ;;
 114         tplink,tl-xdr4288|\
 115         tplink,tl-xdr6086|\
 116         tplink,tl-xdr6088)
 117                 [ "$PHYNBR" = "0" ] && get_mac_label > /sys${DEVPATH}/macaddress
 118                 ;;
 119         ubnt,unifi-6-plus)
 120                 addr=$(mtd_get_mac_binary EEPROM 0x6)
 121                 [ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
 122                 [ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
 123                 ;;
 124         routerich,ax3000|\
 125         zbtlink,zbt-z8102ax|\
 126         zbtlink,zbt-z8103ax|\
 127         zyxel,ex5601-t0|\
 128         zyxel,ex5601-t0-ubootmod)
 129                 addr=$(mtd_get_mac_binary "Factory" 0x4)
 130                 [ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
 131                 ;;
 132         zyxel,nwa50ax-pro)
 133                 hw_mac_addr="$(mtd_get_mac_binary mrd 0x1fff8)"
 134                 [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
 135                 [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
 136                 ;;
 137 esac